How to hide a single tab to tabcontrol

Similar Questions

• How to 'hide' a single stroke behind the other object?

  I'm struggling with something that shouldn't be this difficult!

  I'm planning a logo white T-Shirt only (to go on a dark green T-shirt)

  To simplify, let's say I have two ovals with no fill, just a white line.  A small oval overlapping (sur-haut of) the part of the edge of a larger (oval below).    I have

  Any advice on how to 'hide' the line which is "behind" the top object?

  As follows: http://i.imgur.com/ZghWTMa.jpg  

  Actually, I'm not completely sure yet.

  Response to Steve assumes silkscreen with a single opaque white ink. It will not work if the composite impression not opaque transfers or cut out the vinyl applied, or if you import the work of two-ellipse for combination of other works of art.

  Because you do not know:

  1. draw two circles with a stroke color and fill color (ex: feature black, white fill) on both.
  2. apply the weight of the desired race.
  3 object > path > describe stroke.
  4 pathfinder palette: merge.
  5 white pointer: select both within the regions and remove.
  6. you now have a single compound path; None of the objects that overlap and real 'holes' where you want the substrate to show through. Applies regardless of the fill color (white, etc.) that you need.

  But keep in mind what has already been said: white, unless it is defined as a spot color, does "not print." Think in terms of inks, not in terms of 'color '. In a program like Illustrator, 'white' normally means "no ink". And we must always know what printing method that you design.

  JET

• How to hide the bar tabs in Popup

  Hi all
  
  How can we hide TAB when we show the same page in Popup.
  
  For example, suppose I have page 1 which is showing the TAB 1. I want to see the same page when some touch TAB 2.
  Right now, it's showing with TAB. Y at - it a command to show and hide the tab based on certain conditions?
  
  Thank you

  James,

  Not in a clean way. Why not give all the tabs the same condition. It may not seem so bad...

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen

  You can reward this answer by marking as being useful or correct ;-)

• How to open a new tab from the window with a single white (or other)?

  I'm embarrassed to ask what should be a simple question. I want to open a new window without containing all of the tabs in my homepage - a single tab, empty, or Mozilla or Google or something. I'm tired of having to close manually the 30 - something tabs in my homepage.

  Several solutions for this.
  (I am not sure you are trying to do or to prevent).

  • change what's in your homepage
    • set to open only a couple of tabs and one of those who make a blank page
      tabs are separated by the vertical bar that is vertical (possibly split) symbol |
  • Open your previous tabs instead of the whole home page
  • change the options to open new sites in a new window instead of a new tab

  See

  • How to set the home page
  • Tab Preferences and settings

• How can I get the tabs to go on a single line and a menu of Firefox?

  Firefox allows to have 2 lines above - Firefox menu with tabs and more and another line of the navigation toolbar. during the installation of some programs online, Firefox now have 3 lines at the top, with the Firefox menu on an entire line, the 2nd line of tabs and 3rd line of navigation toolbar. How can I get the tabs to go on a single line and a menu of Firefox?

  With the current versions of Firefox, you can choose to use the menu of Firefox (orange in windows; gray Linux) button at the left end of the Windows title bar or bar menus familiar as in earlier versions. The Firefox button is displayed by default only in Windows Vista and Windows 7, but you can turn on or off or switch between the two or temporarily show the menu bar when the Firefox button is displayed.

  • See how, click here-> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox#w_why-are-the-menus-file-edit-view-etc-missing
  • Other changes after the upgrade-> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox

  If you chose to use the Firefox button and you use the default tabs on top, the tab bar will move to the title bar with the Firefox button only when you are to maximize window (the ' square' the middle button in the upper right corner of the Windows standard application window). Other selected toolbars will be displayed below that (bar Navigation, Bookmarks Toolbar and the toolbars you add via Add - ons).

  • For toolbar, see Selections-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• How to hide a page and its tab to users?

  Hello
  
  I have a created a user with the following information.
  Username: has
  Address e-mail: [email protected]
  Developer privileges
  Default Schema: S
  The user is a developer: No.
  The user is an administrator of the workspace: No.
  Control of accounts
  Consider the availability: unlocked
  Change password on first use: No.
  
  I set the permission scheme: 'administrator access - control' for the page and its tab.
  But the page and its tab appear not only for me (admin), but also to the user.
  How to hide the page and its tab to users?
  
  Thank you
  Guy
  -----
  H5. FYI, I am very new to SQL, PL/SQL, and APEX. Would appreciate much more explanation and full path (for example. Shared components > change the security attributes > VPD)

  Guy,

  The user is an administrator of the workspace: No.

  These authorisation schemes created by the access control wizard do not use status of developer/workspace user accounts. Must add user names in the apex_access_control table and assign the desired privilege to every user.

  Scott

• How to restore the new tab button in the navigation menu when it is not available in the Customize?

  The new tab button disappeared from my navigation menu. None of the changes or upgrades have been made. While all subjects of support suggest going to customize the toolbar, the new tab button is gone either. There in the morning, disappeared in the evening without apparent reason. The + is at the end of the series of tabs, but not in the navigation toolbar and tab add + is NOT anywhere on a page it there is that a single label. I HIDE TAB BAR WITH ONE TAB 1.1 but have had for weeks, and the new tab button was always there. How to restore the button tab on the Navigation bar if it is not available in the choice to customize the toolbar?

  Don't you see the new tab button on the tab bar if you open the window customize?

  If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration

  You can check the problems caused by a corrupt localstore.rdf file and try to delete this file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• How to hide the sub Pop out VI executing main VI

  Hi all: I have a problem running the main VI 'ProConsume for HP8903B.vi', two under VI ejects automatically, the Ref HP8903B read values.vi & the Ref HP8903B Setup before read.vi is really annoying, whenever I click on "single button" on the main façade, the Subvi goes out and occupy more space on the screen, I had to manually close. Much worse for "button continues," when I click on it, the Subvi will keep flickering, I even do not know how to close them! The project file is compressed as an attachment with directory like how to hide\how hide\E\engineer test VIs\NI Forum\LV project folder\how to hide subVI.lvproj can someone help me! Thanks in advance!

  For each of the subVIs open the VI, access the properties of VI (CTRL + I is the Expressway), go to the appearance of the "tab" window, select default.

• How can I close a tab that has locked up, rather than farm the whole browser to be insensitive?

  I have a bad habit of having several tabs open. If I click on a link that translates the whole browser becomes unresponsive, how do I close the tab offending rather than having to close the entire browser and losing all my tabs?

  It is not a bad habit, it's normal.

  Unfortunately, there is currently no way to 'kill' a single tab without picking up Firefox.

  A few times a week I get "not responding" when I exceed the amount of memory Firefox can use. Usually about 60-90 seconds, I can close Firefox by using the menu, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit
  • These same keys in order:Alt f x

  Freezes caused by other reasons could not out, in which case you get stuck. Prevention is the best cure.

  This support article covers some common reasons for freezes: Firefox crashes or does not - how to fix.

  Since the Flash plugin can also cause this problem and it is used everywhere around the web, I suggest the following to minimize potential problems with Flash in your troubleshooting:

  (1) to avoid unnecessary pain on the sites where the Flash is not really essential, try to set the Flash on Click-to-Play (Ask 'activation'). This will delay the Flash start on a page, until you approve.

  To set 'Ask to activate', open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

  With this setting, when you visit a site that wants to use the Flash, you should see a notification icon in the address bar and usually (but not always) one of the following values: a link in a gray rectangle dark in the page or an information bar sliding between the toolbar and in the page area.

  The plugin notification in the address bar icon usually resembles a little Lego block, dark gray. (If it is red, Flash must update.)

  The delay in the activation of Flash can help distinguish between the problems caused on the initial page load, put in folds and script activation vs Flash/loading bar.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the notification icon in the address bar to allow Flash. You can trust the site for the time being or permanently.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification! He will just stand here in case you want to use it later.

  (2) a common cause of errors in script does not work in Windows Vista and later is the feature of mode of the Flash player plugin. This feature has the security benefits, but it seems to have serious compatibility problems on some systems. You can disable it using the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find 'Shockwave Flash' and click on the link for more. Then uncheck the box for "Enable Adobe Flash protected mode" and try it for a day to see if that helps you.

• How can I disable the tab bar in FF 24 when a window is open?

  I've just updated to 24.0 FF FF 20 with Tab Mix Plus already installed. (OS X 10.6.8) In the menu Preferences of Firefox, tabs box, I put the "hide the tab bar: ' option ' when I as one tab.» I also spent the Tab Mix Plus option button and the drop-down list for the same value. Unfortunately, it has not the desired effect. Firefox opens to my home page with a tab at the bottom. (I prefer the tabs down and this setting still works). With only an open page, this tab is completely useless, takes me space, and simple bugs.

  Now, here's what I found. Once I started Firefox, if I go to the Tab Mix Plus options box and select "Hide tab bar: always" and set the option to return to "When I have only a single tab" I can enjoy a page without the tab bar, that is, until I've opened many tabs and then closed all but one. So I see the tab bar remain stubbornly. An incompatibility between FF and Tab Mix Plus, maybe. Is FF 24 leaving no Tab Mix show the number of open tabs? Don't know. But I can't seem to solve.

  Well, never mind, I found yet another addon to fix this. So-called acurately enough, Hide Tab Bar with a tab 1.1 - I recommend it. Unlike Firefox, it works as expected.

  My advice to the developers of Firefox is to allow users to do everything. Most don't mind and will be happy with the default settings, but those of us who have MARKED preferences and there are many of us, we continue to be very frustrated with these new arbitrary limits on the options.

  Solved by myself, with the help of the man who wrote the extension. A big thanks to them.

• How can I remove the tab from the new iTunes update?

  Hi all

  I've just updated my iTunes (Version 12.4.0.119) on my Macbook (Version 10.11.5), and there is the tab on the left side, declaring for example in the music section; recently added albums, artists, etc. I wanted to know how to hide this tab if it is possible?

  Thank you.

  In the iTunes menu bar, hide-> sidebar display.

• How to hide the menu item 'bookmarks '?

  Firefox 5.0.1
  At the menu bar: 'File', 'Edit', 'View', 'History', "Bookmarks", etc.
  How to hide the element of "bookmarks"?
  I have the add-on PLAINOLDFAVORITES installed and
  I forgot how with v3.6.18.
  

  Thank you very much
  

  Click the Firefox button and click on Add-ons -> Add-ons Manager, tab opens-> go to Control Panel Extensions-> select your add-on "Favorite PlainOld" , click Options

  Check and tell if its working.

• How to hide the password wireless

  Hello

  Anyone know how to hide windows Xp and 7 password wireless?

  Thank you in advance.

  Kind regards

  Lanzartel

  Hello

  Thank you for contacting Microsoft Community.
  Go to the properties of the wireless network-> go to the Security tab.
  Under the network security key, you can find the option Show characters. Remove the tick and the password will be hidden. Click Ok.
  If the station is not related to your query, answer here.

• How to hide this odd grid and how is it made?

  How to hide this odd grid and how is it made?

  I have not found an option for this remove from the display tab , it's just stuck there

  

  

  Its just there, just next to the magnification factor Options. Looks like even the guide on your layer. You will find a button that is clicked on. Click the button to turn it off.

  I suggest that you explore the UI and to understand what all the buttons and options due. If you type Panel Composition in the search field help then you will be directed to much info from the community on how to deal with the problem. You can also type Guides and grid. User understanding of the interface will help you get AE to do the things you want it to do.

• How to hide lines?

  Hello people,
  
  I just know that the way to hide lines except dbms_rls package? I mean, it has been said that I can hide lines to create views but lets say I had 200 students and each student can see that their lines in the students table, in this scenerio I must create 200 views, isn't it? I would just learn how to hide lines with the help of views? You have any ideas?
  
  Note: I know dbms_rls package, but this solution that I'm tryin to find the onather solution.
  
  Thank you very much.

  Hello

  Polat says:
  ... Then, u said that I can use the USER-defined function when I creat discover however when people cite this point of view this view always run in the schema owner of views so the USER always returns the same value, isn't?

  No, the USER-defined function always reflects the schema of the caller. Try it. In a single schema (let's say it's POLAT), create a view like this

  CREATE OR REPLACE  view_x
  AS
  SELECT  USER    AS user_name
  FROM    dual;
  
  GRANT  SELECT  ON view_x  TO PUBLIC;
  

  You're still connected under POLAT, run

  SELECT  *
  FROM    view_x;
  

  Now connect with a different user and try

  SELECT  *
  FROM    polat.view_x;
  

  What do you see?

  I'm just trying to understand your example. I mean lets say we have different Oracle user accounts. When users call this view in which it will perform? Session owner, isn't?

  What do you mean by "session of the owner? The owner should not be connected at all. Each user who is logged in will have a separate and independent session. Results of "SELECT * FROM view_x;" might be completely different at each meeting.