How to identify the LUN WWN of ESX 3.5

Similar Questions

• How to identify the LUNS?

  ESX 3.5 update 4 running.  LUNs are on 9980 HDS and USP - V.  Due to a change in the team from SAN, I was ask to move virtual machines out of some old SAN disk.  However, how do I determine which LUNS are the 'old' LUN and what are the "most recent" Lun?  I remember with ESX 2.5.3 I could open the MUI and watch SAN connections and it would display OPEN-L5 or OPEN-L9, etc.

  Hello

  Sorry, I'm not familiar with the storage array you are using.

  But maybe you will find the necessary info with the following command.

  cat/proc/scsi/scsi [/ b]

  You will get a list of all LUNS, your server sees including some information about the provider.

  If this info is not meet your needs, you can also use the output of the command-l [/ b] of esxcfg-mpath.

  For each logic unit number, you will see the WWNS of the adapters used Frontend / storage processors, and the LUN ID assigned by your storage admins.

  Last but not least you can rescan your HBA and watch the vmkernel.log with tail f var/log/vmkernel.log[/b].

  You will see

  I hope this helps a little.

  Greetings from the Germany. (CET)

• How to identify the lun has a fixed path, SRM or rr on esx4 policy?

  After reclassification of esx 3.5 to esx 4.0 and Netapp Storage ALUA political path should change from fixed to Round Robin.

  VMware KB article:

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1010713 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 24058009 & StateID = 1 0 24056058

  http://www.VMware.co.nz/resources/compatibility/detail.php?device_cat=San & DEVICE_ID = 3977

  Release	Mode	Recommended Political path	Firmware	Device (s)	Configuration
  ESX 4.0	VMW_SATP_ALUA	VMW_PSP_MRU	Data ONTAP 7.3	N/A	Switched FC

  For alua esx4i can be configured on vsphere cli

  Command for esx and Esxi 4 4 by vsphere cli

  esxcli - Server esxhost ATAS setdefaultpsp psp - VMW_PSP_RR - ATAS VMW_SATP_ALUA nmp

  Command for esx (service console)

  esxcli - Server esxhost ATAS setdefaultpsp psp - VMW_PSP_RR - ATAS VMW_SATP_ALUA nmp

  After setting this LUN ALUA config only new created have the parameter ALUA and alternating by default.

  For the existing LUN political path was with esx 3.5, the fixed value. After upgrading to esx 4.0, they will be set to fixed.

  What is the command to find out what old LUNS are set on a fixed policy and the new LUN is set to Round Robin.

  This vmware blog, there is an example to all. Y at - it a get to find fixed command, rr or mru?

  http://blogs.VMware.com/vipowershell/2008/07/managing-Storag.html

  After a few PMs that I must conclude that the script, which emulates the esxcfg-mpath command, does not support the NAA address that is used by NetApp.

  As a quick fix, you can use the other script I gave above that uses cmdlets Get-ScsiLun and Get-ScsiLunPath .

  Who should at least show you what multi-path strategy is used.

• How can identify the real space in my SGPT123 Tablet?

  Hello

  How can identify the real space in my Xperia Tablet? I can see only 10.0 GB, if suppose has 16 GB, where's the rest?

  A space is medical, the Android operating system and recovery Partition.

• C: drive is running out of space, even if I moved everything I could to the E: drive. How to identify the "space Eater"?

  I moved all my data to the other disk. I was installing new programs on the other disk. Yet, the space on drive C: (37 GB) keeps becoming 'used '. Free space now is 2%. How to identify the "space Monster" which takes more and more the training?

  37GB is size sorry for C:.  My minimum recommendation for everything that came out at the time of and after Windows Vista is 60 GB.

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

• How iterate/identify the screens of the application stack

  Hi all

  1. work on the version of BB storm (9500/9530 Simulator) is v4.7.0.75
  2 opportunity BB JDE 4.7

  3. the request is:

  In my application I have screens showns one based on the click number, how can I display no matter which screen every time I required.i tell how fetch/identify the battery and display.

  Thanks in advance

  Ratna

  I donno what are your exact needs...

  If you want to load screens on selcting a menuitem from the GUI go to create menuItem.

  In the case depends on certain conditions of your application then just use

  try
    {
         UiApplication.getUiApplication().pushScreen(TestScreen);
    }
  
  catch(Exception e)
  {
  // PUSH screen fails because the screen was already pushed.
  // remove the screens from top of the required screen.
  while(UiApplication.getUiApplication().getActiveScreen() != TestScreen)
  
    {
       UiApplication.getUiApplication().popScreen();
    }
  }
  

• How to identify the virtual copies (in my records) that have already been deleted a collection

  Hello!

  I keep looking for an answer to this anywhere on the web and 3 books, but can't find the answer...

  How to identify the virtual copies (in my records) that have already been deleted a collection?

  Here's the workflow, and where I'm stuck.

  1. I chose a picture and put it in a collection.

  2. I did a whole bunch of virtual photos in the collection copies that I tried different modifications.

  3. after and during a lot of changes, I have a lot of virtual copies removed from my collection because I decided against the changes after doing some comparisons.

  4. when I went the folders to select my next picture to work away and so to add to the collection, I discovered that each of my virtual copies was in the original folder, even if I had deleted from my collection.

  5. I really don't want these virtual copies deleted to be in my home folder.  They were virtual copies of trial and error and I wanted them to really just be thrown out.

  6. how to identify these virtual copies removed-from-the-collection in my folder?  File names all look the same, and besides, I want to be absolutely certain that I have selected the right ones.  Some of the changes were very minor and would be difficult to see without laboriously go through them one by one.

  Thank you very much!!

  Anne

  No easy answer on fixing the mess other than an individual inspection of the virtual copy can't watching the Images/Edit history to determine which ones that you no longer need.

  But to help prevent the problem in the future: when you are working from a collection, you must use ALT + return back to remove a copy of Photo or virtual catalog. With just the key DELETE or BACKSPACE only deletes the photo from the collection.

• How to identify the iSCSI nodes?

  How to identify the iSCSI nodes?

  with IQN

• How to identify the fonts used in text format?

  How to identify the fonts used in text format?

  Hi DSB.

  Open the document in Reader, go to the menu file-> properties, then click on the tag are. You will see a list of the fonts used in the document.

  Another option is to copy the text and paste it into MS Word, where you can simply move your mouse over the text to display the name of the font.

  Kind regards

  Nicos

• How to identify the Protocol of network storage using PowerCli

  Hi all

  Does anyone know how to identify the network storage protocol using Powercli? If you do could you please point me in the right direction and appropriate controls to be used.

  Thank you.

  See you soon

  With the Get-EsxCli cmdlet, you get to many of the features esxcli.

  Something like that

  $esxcli = Get-EsxCli -VMHost MyEsx$esxcli.storage.core.path.list()
  

  You can use Select-Object to choose the specific properties of the returned objects.

  For example

  $esxcli = Get-EsxCli -VMHost MyEsx$esxcli.storage.core.path.list() | Select RuntimeName,Transport
  

• How to identify the primary Parent of a shared node?

  We have a property that is set to Local defined, inherit,

  Suppose the 'Color' property and currently is the behavior in DRM

  Parent A - blue

  Child 1 - blue (inherited from Parent)

  Child 2 - color blue (inherited from Parent)

  Child 3-color blue (inherited from Parent)

  Parent B - Red

  Child 3 ~ part 1 - red color (inherited from Parent B)

  Child 4-color red (inherited from Parent B)

  Children 5 - red color (inherited from Parent B)

  The customer has improved the requirement so that in the case of shared members 'color' is inherited from the primary parent like the example below.

  Parent B - Red

  Child 3 ~ action1 - blue (inherited from "Primary" Parent A)

  Child 4-color red (inherited from Parent B)

  Children 5 - red color (inherited from Parent B)

  I guess I'm going to need a new property like 'Primary colors' and I need to write a formula to calculate the color of base on the primary parent.  However, I do not know how to identify the "main Parent" a shared node we use version 11.1.1.2 N-Tier

  I'm looking for suggestions on how to calculate the value of the property you want.

  Any help will be greatly appreciated.

  Hello

  You can create a new property derived like u said and use instead of the property defined in your exports or anywhere where you have to refer to the color. The property set can be used just to take the user input.

  The new derived property should be a logic like that-

  If (PropValue (Core.SharedFlag_MDM),

  NodePropValue (PropValue (Core.PrimaryName_MDM), Custom.Colour)

  PropValue (Custom.Colour))

  Now, 11.1.1.2 I lost the memory of how the properties are referred to as - if they are just used with their names or namespaces is mentioned (Core. , custom.). You can change the formula accordingly to view properties

  Thus, if SharedFlag_MDM is True, then it will take the value of the property to its primary node, which is inherited from the primary parent and if the shared flag is False then it is just a varValeurProp on the node itself.

  I hope that answers you.

  Thank you

  Denzz

• Identifying the LUNS connected to VM via vCLI

  I'm looking to identify the LUNS that are connected to a virtual computer by using the interface vCLI. Can anyone offer assistance in pulling this info?

  No script canned vCLI doesn't exist to do this mapping, but take a look at this custom vSphere SDK for Perl script to help you in this task - vmVMDKToDatastoreToDeviceMapping

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• How to control the service console in ESX?

  How to control the service console in ESX?

  http://www.Petri.co.il/5-critical-VMware-ESX-CLI-network-commands.htm

  http://download3.VMware.com/VMworld/2006/mdc9694.PDF

  http://download3.VMware.com/VMworld/2006/mdc9807.PDF

  http://download3.VMware.com/VMworld/2006/tac0028.PDF

  http://download3.VMware.com/VMworld/2006/tac9689-b.PDF

  http://download3.VMware.com/VMworld/2006/labs2006/VMworld.06.Lab04-performance-manual.PDF

  http://www.RTFM-ed.co.UK/

  PS: If you have found useful messages then please leave a few points

  André

• How to identify the serial number for the instalation?

  How to identify the serial number for adobe photoshop cs5?

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

• How to identify the expressions of folklore in the lot while reading File adapter

  Hello
  I have a bepl process to read data from a batch of 100 records text file and write in an Oracle EBS interface table.
  After the completion of the above, I have to call a partner link.
  Problem here is that, how to identify the expressions of folklore, so that I could call my link partner in BPEL.
  How do I get there? Any help is greatly appreciated.

  Hello

  You can implement a separate process, say FileNotificationProcess, you call the link partner, based on the batch Manager wsdl to $ORACLE_HOME/bpel/system/xmllib/jca/BatchManager.wsdl. This new process would be notified of different States of the file reading activity:
  # onBatchReadStart - indicates when a file is started to read
  # onBatchReadComplete - indicates when a file is done playing
  # onBatchReadFailure - tells when a record cannot be processed by the infrastructure of adapters.
  In your case, you would call the partnerlink when a notification of "onBatchReadComplete" is sent.

  In your main process to the file adapter, add the below property, so that the file adapter would inform the new process of the different stages of the processing of batch file.

  bpel://default|FileNotificationProcess
  

  This is described in detail in BPEL best practices guide page 3-18 http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf and the article excellent blog of anthony at http://blogs.oracle.com/reynolds/2008/06/more_on_batch_processing_in_bp.html.

  Kind regards
  Yohanna.
  http://www.prshanmu.com/articles/