How to insert new Modules of RAM in Tecra M7

Similar Questions

• How to install the module of RAM of Tecra M1

  Hey

  Where can I find where to install the RAM on my Tecra M1?

  Hello

  Memory modules are hidden under the keyboard.
  You need to remove the keyboard first to get access to the memory modules.

  The keyboard is fixed with two screws behind the plastic cover thin above the row of keys F1 - F12.
  After the screws have been removed you can lift the keyboard and could remove the modules.

  But beware: the insulation covers the memory locations. You will need to attend the insulation first.

  Concerning

• HP Pavilion p6210pt desktop PC: after the installation of the new module of RAM PC does not start and continues to beep.

  Hello

  I am trying to upgrade the RAM on my PC. I don't know I got the correct specifications: 240 pin DDR3 PC3 - 10600 1333 MHz

  And it comes to envy, I bought, Kingston.

  The PC has 6 GB of RAM and a free slot, after I insert the new module on the free location corretly and press power, the PC does not start. It starts just a beep and the screen remains black.

  Don't know how better to explain this.

  If I take the new RAM all works normally. If I take old modules and just start by the new, the same thing happens, computer won't start not and just keeps to the beep. One of the Tweets is longer than the other, and then it repeats.

  Can anyone help please, it's just the motherboard it is too old or something?

  Thank you.

  See you soon.

  JO

  Hello

  Given that your PC works with the old DIMM modules and not the new dimm then you should contact Kingston for a cure.

• Satellite L30 - 10Y black at startup the screen upward after the installation of new modules of RAM

  Hello

  I use the L30 - 10Y model with the following memory specification:

  standard: 512 MB
  maximum scalability: 2 048 MB
  technology: DDR2 RAM (533 MHz)
  expansion module sizes: 256, 512, 1 024 MB

  I use Windows Vista Home Basic Edition with a 32-bit operating system.

  When installing, I removed the standard 512 MB module and added 2 modules of 1 GB compatible. At startup, it stays on a black screen.

  However, if I removed 1 1 GB modules and put the old 512 MB module to give me 1.5 GB, it works.

  I was wondering if anyone knows why this is and if there is anything that I can try to get the maximum of 2 gb, if it is indeed possible.

  Thanks in advance.

  According to the product page Toshiba Satellite L30 - 10Y is able to manage 2 GB of RAM (2 x 1 GB)
  I think that the problem is related to memory modules not fully compatible
  I think a new, fully compatible RAM modules should resolve this problem.

  PS: You updated the BIOS? If this is not the case, check if a new update of the BIOS is available on the European driver Toshiba page.

• Satellite L350 - BSOD with new modules of RAM

  Hi, I have a Toshiba Satellite L350, it helps to have a memory of 2 GB 2 x 1 GB (PC2 5300 s)
  Now I bought 2x2gb (PC2 5300 s) to get a 4 GB and installed them both, but when I turn on my laptop I get the BSOD with Driver_IRQL_Not_LEss_OR_EQUAL error with ataport.sys

  Address 814A2AE1
  81499000 base
  datestamp 49ee8a3a

  Running Windows 7
  The two 2 GB cards memory sticks works fine individually but

  Any help would be welcome. Thank you

  Hi mate,

  What new RAM modules that you have bought exactly? For the moment, I think that they are not compatible together and so the BSOD appears. I think you have to use other RAM modules if want 4 GB of RAM.

  Also if you run a memory diagnostic tool like Memtest86 doesn't it displays an error if you use the new modules?

• HP 15 g073nr: how access to install the new module of ram

  does anyone know how to get to the memory card in the g073nr 15 hp?

  Here's the manual repair HP for your system with detailed removal / replacement for all components instructions. Page 65 is memory removal and replacement.

  If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

• Satellite L300 - 16L - BSOD with new modules of RAM

  Hello

  I have a Satellite L300 - 16L and make me the same problem.

  Has got 2 x 1 GB DIMMS standard and ordered 2 new 2 GB DIMMS. If I put the 2 new 2 GB DIMMS in I get the BSOD, Memtest also crashes as soon as it starts to test. If I place a 1 GB Dimm in the lower slot and a 2 GB in another windows starts fine, if I try to put the 2 in the lower slot and 1 GB in the higher the BSOD that he.

  But if I put either of 2 GB on the lower slot his own windows boots fine, mem test has also allows to test the two GBs 2 individually and said no problem.

  Any ideas anyone? My laptop is supposed to support 4 GB, I'm sure of it.

  Thank you
  JJ

  Hi Jack_Jumpin,

  > My laptop is supposed to support 4 GB, I'm sure of it.
  Why you are sure that your laptop supports 4 GB of RAM?

  I checked the specification of your laptop on the Toshiba page and this L300 - 16L supports only 2 GB. This means that you can only use two modules including 1 GB of capacity.

  Sorry, mate, but you can use t 4 GB. The chipset supports only 2 GB.

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• How to insert new records into master and detail forms.

  Hello
  
  I cannot have values are inserted in the main view and details at the same time. Scenarios is I a Dept Table (view object-VO1) and employee Table (View Object-VO2) both related to a foreign key, according to HR in Oracle DB XE default schema.
  
  Now, I want to insert the new record into a table Dept (VO1) and the EMP (VO2) by a new say on page (page 2). There is a button on page 1 with button INSERT. I can only drag "CreateInsert" operation on this button for VO1 and VO2. So only text box for records Dept are allow to insert data, but not the Emp records. Is there a way I can insert data into the tables at the sametime?
  
  Thank you
  MB

  Hi MuradRabbani,

  You can call programmatically two createInsert operations,

  Add to your pageDef two CreateInsert operations.
  Create a button tha will be master (VO1) insert method call and then call insert for details (VO2) method

  Here is an example of code to call the operations:

  DCBindingContainer dcb = ADFUtils.getDCBindingContainer (); you need the ADFUtils.java and JSFUtils.java classes. You can find them in the sample applications in your JDeveloper.

  OperationBinding oper = dcb.getOperationBinding("CreateInsertVO1");

  Oper.Execute ();

  -NOTE: at this point, you must set the values that compine the ViewLink on the master in the order detail will know where to link the new record there are many ways to do it.
  As solution try to overrdi the method to create on the in the your master vo (VO1) ViewRowImpl
  for example
  @Override
  protected void create (AttributeList attributeList) {}
  front
  attributeList.setAttribute ("NameOfAttribute", valueHere);
  Super.Create (AttributeList);
  }

  ------------------

  After that, you must call the operation for your VO2 detail

  for example

  DCBindingContainer dcb = ADFUtils.getDCBindingContainer ();

  OperationBinding oper = dcb.getOperationBinding("CreateInsertVO2");

  Oper.Execute ();

  The detail record will now automatically have the values of your master.

  Kind regards
  Dimitris.

• Equium L100 186: how to remove & update modules memory

  I bought 2 x 1 GB memory modules for my satellite L100-186 and on removal of the cover to find that it
  difficult to access and delete existing ones. I'd be able to try this or do
  professionally?<>

  Hello

  Usually, the update of modules memory is not very difficult but a little trickier.
  A common user should be able to upgrade memory but please don t use force but be always gently and attention!

  In the manual, you should find a description detailed of how to remove and how to insert the modules.
  Check it ;)

  But note; If you have no experience and don't know how to do this contact a technician for help. In this case, you are always on the right side

  Good bye

• How to insert a step to give the position?

  Hello

  I have the sequence with the Select Case structure and to insert steps within the business end. How to do this? I found the index step can be readable by the TS_SequenceGetStepIndex (SequenceHandle, & errorInfo, szTestType, TS_StepGroup_Main, & val), but how to insert new step after, for example the case? For the function TS_SequenceInsertStep (SequenceHandle, & errorInfo, view, iNumofSteps, TS_StepGroup_Main) is not available index (iNumofSteps sucks and does not work as an index of the step and cannot be applied to the order of insertion of the steps (first step on start or end)).

  Currently, I create all (Select, case, end and the steps that need to be in the end case), but if the basic structure can be a default (including case select this option, etc.), only content must be updated, not all construction.

  (LabWindows/CVI coding)

  Best regards

  branar

  Hi all

  Yes, it was the right solution. Only thing, it's that need to take iNumofSteps for the front step and if you want to insert the new stage (or stages), this index should be increased by 1.

  error = TS_SequenceGetStepIndex (SequenceHandle, &errorInfo, "TuningTimeAfterLNA", TS_StepGroup_Main, &val);
                  iNumofSteps=val+1;
                      //add
                      tsErrChkMsgPopup( TS_EngineNewStep (EngineHandle, &errorInfo, "", "Label", &actionStep));
                      tsErrChkMsgPopup( TS_StepSetName ( actionStep, NULL, szTestType));
                      tsErrChkMsgPopup( TS_SequenceInsertStep ( SequenceHandle, &errorInfo, actionStep, iNumofSteps, TS_StepGroup_Main ));
  

  Best regards

  branar

• Hello. I just know that the muse and I need an organization of customers in alphabetical order. The problem is that you will always get new clients. I need to know how to insert a new customer (square), and it is already in alphabetical order on the page.

  Hello.

  I just know that the muse and I need guests alphabetical organization. The problem is that you will always get new clients. I need to know how to insert a new customer (square), and it is already in alphabetical order on the page. The site will be as in the link below, and each customer will have a window of these: http://www.connary.com/. I look back.

  A hug, Murilo.

  I believe you are referring to the rectangles of tile as visitors on the page? not exactly customer database?

  You can add rectangle with different effects with rollover State of mouse and about adding new, you must do this manually in design mode.

  Thank you

  Sanjit

• Why my Satellite does not detect a new module of memory?

  Hello

  Today, I installed a new memory module SDRAM 128 MB in my Satellite 1670. It is not a real module but on the package is the right code: PA3005U.
  After that I turned on the computer, it is not detected then I use still 32 MB of RAM.
  How can I solve this problem?

  Steef

  Hello

  The fact is that you use the right memory module. It is not easy to say why the new module is not recognized correctly. The slot is maybe defective. Try to remove 32 MB module and use any other location 1. (Unfortunately I put t know if this device has two or one single location for memory expansion).

• Satellite Pro L - how to get the 2 GB RAM recognized?

  Hi all, I'm new to the forum and I cannot get my laptop to recognize kingston DDR2 2x1GB two identical cards.

  I first had 512 MB card and replaced, which, with the cards Go too 1 booted up and system show only 896 MB so asumed 1 card was defective. 1 remove maps and 1 left in the slot in the bottom, rebooted and still 896 MB, rearranged 1 with the other card 1 GB and initialized and same 896 MB or something. If the two cards into the lower slot but not work together so I thought then perhaps the top slot was not working.
  I tried both cards 1 GB by themselves in the top housing and both show 896 MB.

  So I then tried the original 512 MB with 1 the1GB cards and weak a system here is reading 1.37 g of ram. My question is how can I get both the Rams from 1 GB to start working so bed 2 GB system?

  Hey Buddy,

  Before you start a lengthy discussion, you should post which model of laptop, you use. Maximum use of RAM depends on the motherboard, chipset and BIOS.

  But now that it sounds like that the modules are not compatible to your laptop.

• Satellite L300-229 - new module of memory is not recognized

  Satellite L300-229 - I just installed an extension of memory of 1 GB to add to the existing 1 GB.

  I used a 1 GB Crucial 200pin DDR2 SODIMM PC2 6400 CL6. For some reason, it will not recognize it and shows again that the 1 GB. I closed and installed in start mode according to manual and tried to reinstall.

  Any idea?

  Thank you

  Hello

  What happens if you only install the new module 1 GB RAM? Don't start the computer and if so how much RAM does show?

  Normally, the specifications of the new RAM module should work. I have a Satellite L300 too and I've updated it with the same RAM but Kingston. It works without any problem. :)