How to insert rows in the table dynamically?

I have a table with 18 ranks. Each of the first 17 rows have text read-only (mandatory activities) in a text field in the first column; the last line is a blank line with an Add button so that the user can add a new activity to the bottom of the table.

I was invited to allow users to insert a new activity at any location in the table (by example, to insert a new 7 row after row 6), instead of just at the end of the table. (Of course this requires also remove the text in the text box of the activity and to change to the entry by the user, as well as a few other household activities, which should not be a problem if I can get just the line darn insert!)

I searched the forums and looked at some of the examples ensure dynamics. From what I've seen, this should be fairly simple... but it does not work.

Or rather, it works very well on the first line, several times even. I have a message box displays the indices of current and new line properly for each line. But in any other line as the first, insertInstance() gives me an error "index value is out of range" even when the message box displays the correct clues.

Given the structure and the following code in each button an ActivityAdd line, can someone tell me what I'm doing wrong? Thank you!!!

-------------------------------------------

tableStructure.png

---------------------------------------------

T_Activities.R_Activity [0]. T_AddRemove.R_Add.B_ActivityAdd::click - (JavaScript, client)

var vNewRowIndex = this.parent.parent.parent.index + 1;

xfa.host.messageBox ("the index of this line:" + this.parent.parent.parent.index + ".") Index of the new row: "+ vNewRowIndex +". ");"

T_Activities.R_Activity.instanceManager.insertInstance (vNewRowIndex, 1);

------------------------------------------------

FWIW, I've seen the warnings about the instance manager and features underscores in names of object... for better or worse, * all * of my names object * all * of my forms use underscores like this, and to the best of my knowledge I have never had a problem. So which proves to be the problem here, I'll gladly change the names in the table.

Did you use java or formcalc when you got the error? I've recreated your table and the code works in formcalc.

Concerning the insertIndex working in the first line, I think that maybe it's because you always refer to the first line (R_Activity).

Tags: Adobe LiveCycle

Similar Questions

  • How to insert data into the table by using the expression builder in the assign activity

    How to insert data into the table by using the expression builder in affect business in BPEl, I use SOA Suite 11.1.1.5
    Can someone help me please

    Hello

    I don't think that oraext:query-database() can insert data into the table.

    What are your needs?
    Can not you plan to use the DB adapter with the insert operation?

    Kind regards
    Neeraj Sehgal

  • Need help to insert rows in the table to a custom table area

    Hi all

    I have a requirement as below.

    I have a page of the i invoke a popup search page and displaying the table data in the area of the table, this table I select lines and pressing the button and given in the basic page in the region of the table being filled, of data, I need to insert these lines into a custom table. Please help me how to achieve this. Basically, I need to insert rows from one table to a custom table region.

    Thnaks

    Hello

    Review the link, below, may be it will help you:

    https://forums.Oracle.com/thread/953885

    https://forums.Oracle.com/thread/2151775

    Please share your solution here, it will help others.

    Concerning

    Mahesh

  • Impossible to insert rows in the table

    My insert statement below is not correct, when I try to run, his encoutering error "table or view does not exist.

    Basically what I'm doing here collects the table name in THE variable that stores the name of the table in this variable. This variable, I use as a table. I know that's not the right way, please let me how can I insert rows in the complete table with the following code.

    DROP TABLE TEMP;
    CREATE TABLE TEMP AS SELECT * FROM model WHERE 1 = 2;
    DECLARE
    I HAVE INTEGER DEFAULT 1;
    S VARCHAR2 (50);
    Start
    for C (select TABLE_NAME IN s from USER_TABLES where TABLE_NAME like '% of the CABLE' and TABLE_NAME NOT like '% OLD' and the order of 0 > Num_ROWS by TABLE_NAME) loop
    INSERT INTO TEMP SELECT * FROM c.TABLE_NAME;

    dbms_output.put_line (c.table_name);
    end loop;
    end;



    The insert statement above is not correct. How can I write good way.

    Thank you.

    Best regards
    Arshad

    user13360241 wrote:
    My insert statement below is not correct, when I try to run, his encoutering error "table or view does not exist.

    Basically what I'm doing here collects the table name in THE variable that stores the name of the table in this variable. This variable, I use as a table. I know that's not the right way, please let me how can I insert rows in the complete table with the following code.

    DROP TABLE TEMP;
    CREATE TABLE TEMP AS SELECT * FROM model WHERE 1 = 2;
    DECLARE
    I HAVE INTEGER DEFAULT 1;
    S VARCHAR2 (50);
    Start
    for C (select TABLE_NAME IN s from USER_TABLES where TABLE_NAME like '% of the CABLE' and TABLE_NAME NOT like '% OLD' and order > 0 Num_ROWS of TABLE_NAME) loop
    INSERT INTO TEMP SELECT * FROM c.TABLE_NAME;

    dbms_output.put_line (c.table_name);
    end loop;
    end;

    The insert statement above is not correct. How can I write good way.

    Thank you.

    Best regards
    Arshad

    STMT: = "INSERT INTO TEMP SELECT * FROM ';"

    STMT: = STMT. S;
    IMMEDIATELY EXECUTE STMT;

  • How to insert rows in multiple tables in a sql

    I want to know how to insert multiple lines in a single sql statement.

    Let's insert records into the table emp and dept in a sql statement.


    Thank you

    It's here

    SQL>l
  1  insert all
  2    into emp values(8888,'WADE','MANAGER',7839,'01-MAR-2008',5000,100,20)
  3    into dept values(50,'MARKETING','NEW YORK')
  4* select * from dual
SQL> /

2 rows created.

    SS

  • How to insert data into the table of plain text stored as a CLOB in another table

    Hi people,

    Maybe it's an easy question for someone who is more frequently used files and CLOB.

    I have a table that stores text files in the CLOB column. Files text includes some basic data that I want to load in the other - a text line = a new insert for me. Is there a "trick" how to do it effectively?

    Here is my model:

    Table OS_IMPORT_DOCS, stores the complete files as CLOB
    SQL> desc OS_IMPORT_DOCS
Name          Type           Nullable Default Comments 
------------- -------------- -------- ------- -------- 
OBJECT_ID     NUMBER                                   
DATUM_ZMENY   DATE                    sysdate          
FILE_PATH     VARCHAR2(4000) Y                         
FILE_NAME     VARCHAR2(4000) Y                         
FILE_SIZE     NUMBER         Y                         
LAST_MODIFIED DATE           Y                         
DOCUMENT      CLOB           Y                         
STATUS        VARCHAR2(15)   Y        'NEW' 
    Sample data from OS_IMPORT_DOCS
    SQL> select *
  2    from os_import_docs d
  3  order by d.last_modified desc
  4  ;
 
 OBJECT_ID DATUM_ZMENY FILE_PATH                      FILE_NAME       FILE_SIZE  LAST_MODIFIED DOCUMENT    STATUS
---------- ----------- ------------------------------ --------------- ---------- ------------- ----------- ---------------
   1815043 13.8.2012 1 d:\data\C120813.DAT            C120813.DAT          16800 13.8.2012 16: <<CLOB>>    NEW
   1815042 13.8.2012 1 d:\data\C120812.DAT            C120812.DAT           3600 12.8.2012 22: <<CLOB>>    NEW
   1815041 13.8.2012 1 d:\data\C120811.DAT            C120811.DAT           1800 11.8.2012 13: <<CLOB>>    NEW
    Example of file CLOB - stored text data (select d.document from os_import_docs d where d.object_id = 1815042 ;)
    061053120820120000AGT000002Osoby                   0000000042301000000017210632
062322120820120000AGT000002Osoby                   0000000012301000000017197566
063526120820120001AGT000002Osoby                   0000000012301000000017197566
064234120820120001AGT000002Osoby                   0000000103301000000162218777
    Above the example text includes "columns" in plain text:
    timestamp - 1-14, SSMIHH24DDMMYYYY position format
    flag - post 15-18
    company code - position 19-27
    etc...

    How can I query data stored within the OS_IMPORT_DOCS. The DOCUMENT column, divide it into columns and insert into another table?
    I have to read this method of 'online' file?


    Thank you very much
    Tomas

    For the first three columns:

    SQL> create type TRecord is object (
  2    ts           timestamp
  3  , flag         varchar2(4)
  4  , company_code varchar2(9)
  5  );
  6  /

Type created

SQL>
SQL> create type TRecordTable is table of TRecord;
  2  /

Type created

SQL>
SQL> create or replace function parse_clob (p_doc in clob)
  2  return TRecordTable pipelined
  3  is
  4    lf      number;
  5    eol     varchar2(2) := chr(10);
  6    eollen  number := length(eol);
  7    line    varchar2(32767);
  8    offs    number := 1;
  9  begin
 10    loop
 11      lf := dbms_lob.instr(p_doc, eol, offs);
 12      if lf != 0 then
 13        line := dbms_lob.substr(p_doc, lf - offs + 1 - eollen, offs);
 14        offs := lf + eollen;
 15      else
 16        line := dbms_lob.substr(p_doc, dbms_lob.getlength(p_doc) - offs + 1, offs);
 17      end if;
 18      pipe row (
 19        TRecord(
 20          to_timestamp(substr(line, 1, 14), 'HH24MISSDDMMYYYY')
 21        , substr(line, 15, 4)
 22        , substr(line, 19, 9)
 23        )
 24      );
 25      exit when lf = 0;
 26    end loop;
 27  end;
 28  /

Function created

SQL>
SQL> select t.*
  2  from os_import_docs d
  3     , table(parse_clob(d.document)) t
  4  where d.object_id = 1815042;

TS                                     FLAG COMPANY_CODE
-------------------------------------- ---- ------------
12/08/12 06:10:53,000000               0000 AGT000002
12/08/12 06:23:22,000000               0000 AGT000002
12/08/12 06:35:26,000000               0001 AGT000002
12/08/12 06:42:34,000000               0001 AGT000002

  • Insert a row into the table on a button click

    Hi all

    I have a table called 'temp' with 4 columns such as seq, name, event, id and I have a GP with 3 text such as name, event id fields

    now my question is

    If I enter values in the 3 text fields on this page and a button, click on (for example create), I wanted the values of dose to get inserted into the table 'temp' and

    regarding, "seq" column I HAV created a sequence for it.

    so 1. How to insert values into the table by entering the values in the page

    2 wat shd b made to column seq... (shd b anyth made apex pages or wil automatically get values for each input line)

    pls help me...

    Thanks in advance

    1, it is up to you change your account to something more user-friendly than '8f4692cc-040e-48ee-b102-590cdd4303fc'.

    Then, it would also be a good idea to use proper English when you ask a question here...  Not broken English as "now comes to my" and "wat shd b"... More people will be willing to help you if you at least put forward in order to ask a good question...

    Which version of the database are you using? APEX version?

    Change the code above to this process:

    DECLARE

    v_seq NUMBER;

    BEGIN


    Select SEQUENCE_NAME. NEXTVAL INTO v_seq

    Double;


    INSERT INTO temp (seq, name, event, id)

    VALUES (v_seq,: P1_name,: P1_event,: P1_id);

    END;


    This allows it to be used in older versions of Oracle that do not allow direct access to the sequence.nextval in an assignment statement.


    Thank you


    Tony Miller

    Software LuvMuffin

  • Add more than 2 lines for a select statement without inserting rows in the base table

    Hi all

    I have a below a simple select statement that is querying a table.

    Select * from STUDY_SCHED_INTERVAL_TEMP
    where STUDY_KEY = 1063;

    but here's the situation. As you can see its return 7 ranks. But I must add
    2 rows more... with everything else, default or what exist... except the adding more than 2 lines.
    I can't insert in the base table. I want my results to end incrementing by 2 days in
    measurement_date_Taken on 01-APR-09... so big measurement_date_taken expected to
    end at study_end_Date...



    IS IT STILL POSSIBLE WITHOUT INSERT ROWS IN THE TABLE AND PLAYIHY ALL AROUND WITH
    THE SELECT STATEMENT?

    Sorry if this is confusing... I'm on 10.2.0.3

    Published by: S2K on August 13, 2009 14:19

    Well, I don't know if this request is as beautiful as my lawn, but seems to work even when ;)
    I used the "simplified" version, but the principle should work for your table, S2K.
    As Frank has already pointed out (and I fell on it while clunging): simply select your already existing lines and union them with the 'missing documents', you calculate the number of days that you are "missing" based on the study_end_date:

    MHO%xe> alter session set nls_date_language='AMERICAN';

Sessie is gewijzigd.

Verstreken: 00:00:00.01
MHO%xe> with t as ( -- generating your data here, simplified by me due to cat and lawn
  2  select 1063 study_key
  3  ,      to_date('01-MAR-09', 'dd-mon-rr') phase_start_date
  4  ,      to_date('02-MAR-09', 'dd-mon-rr') measurement_date_taken
  5  ,      to_date('01-APR-09', 'dd-mon-rr') study_end_date
  6  from dual union all
  7  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('04-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
  8  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('09-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
  9  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('14-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
 10  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('19-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
 11  select 1063, to_date('22-MAR-09', 'dd-mon-rr') , to_date('23-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
 12  select 1063, to_date('22-MAR-09', 'dd-mon-rr') , to_date('30-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual
 13  ) -- actual query:
 14  select study_key
 15  ,      phase_start_date
 16  ,      measurement_date_taken
 17  ,      study_end_date
 18  from   t
 19  union all
 20  select study_key
 21  ,      phase_start_date
 22  ,      measurement_date_taken + level -- or rownum
 23  ,      study_end_date
 24  from ( select study_key
 25         ,      phase_start_date
 26         ,      measurement_date_taken
 27         ,      study_end_date
 28         ,      add_up
 29         from (
 30                select study_key
 31                ,      phase_start_date
 32                ,      measurement_date_taken
 33                ,      study_end_date
 34                ,      study_end_date - max(measurement_date_taken) over (partition by study_key
 35                                                                          order by measurement_date_taken ) add_up
 36                ,      lead(measurement_date_taken) over (partition by study_key
 37                                                          order by measurement_date_taken ) last_rec
 38                from   t
 39              )
 40         where last_rec is null
 41       )
 42  where rownum <= add_up
 43  connect by level <= add_up;

 STUDY_KEY PHASE_START_DATE    MEASUREMENT_DATE_TA STUDY_END_DATE
---------- ------------------- ------------------- -------------------
      1063 01-03-2009 00:00:00 02-03-2009 00:00:00 01-04-2009 00:00:00
      1063 03-03-2009 00:00:00 04-03-2009 00:00:00 01-04-2009 00:00:00
      1063 03-03-2009 00:00:00 09-03-2009 00:00:00 01-04-2009 00:00:00
      1063 03-03-2009 00:00:00 14-03-2009 00:00:00 01-04-2009 00:00:00
      1063 03-03-2009 00:00:00 19-03-2009 00:00:00 01-04-2009 00:00:00
      1063 22-03-2009 00:00:00 23-03-2009 00:00:00 01-04-2009 00:00:00
      1063 22-03-2009 00:00:00 30-03-2009 00:00:00 01-04-2009 00:00:00
      1063 22-03-2009 00:00:00 31-03-2009 00:00:00 01-04-2009 00:00:00
      1063 22-03-2009 00:00:00 01-04-2009 00:00:00 01-04-2009 00:00:00

9 rijen zijn geselecteerd.

    Is there a simpler way (in SQL), I hope that others join, and share their ideas/example/thoughts.
    I feel that it is using more resources there.
    But I have to cut the daisies before now, they interfere my 'grass-green-ess";)

  • How to display a message after inserting line in the table...

    Hello

    I want to display a message after inserting rows in the table as *' you have inserted a new line with success *'.


    I use the ADF button createinsert to insert the rows in table.after that I am stolen it.


    After commit I want to display message for the user.for what I need to do.





    Please help me.





    Sanchez.

    Double-click the validation button, to link Action property dialog will appear and then create a method of bean managed for the validation button.
    Then, add the following code to the method:

    public String saveButton_action() {}
    BindingContainer links = getBindings();
    OperationBinding operationBinding = bindings.getOperationBinding ("Commit");
    Object result = operationBinding.execute ();
    Note "!" operator has been removed from the default code.
    {if (OperationBinding.GetErrors (). IsEmpty())}
    FacesContext ctx = FacesContext.getCurrentInstance ();
    FacesMessage saveMsg is new FacesMessage ("saved successfully");.
    ctx.addMessage (null, saveMsg);
    }
    Returns a null value.
    }

    Then, restore the ActionListener value.

    I hope this helps.

  • Error when inserting rows into a table

    Hello

    We have recently migrated to 9i and 10g. We have a scheduled task on our database who first removes all rows from a table and then inserts them back by selecting the lines of 5 tables. This table has a composite primary key based on 6 columns in it. In 9i, when I try to insert rows in the table after you remove all of the lines, I am able to insert the data successfully. However, in 10g, when I try to do the same operation, it fails with error ORA:

    ORA-00001: unique constraint violated

    The same query that works perfectly in 9i fails in 10g

    If anyone has some ideas on how to solve the same, kindly let me know.

    Thanks in advance.

    CrazyAnie wrote:
    Okay, so now the only option that remains is that I have load the data into a local table and then perform the loading.

    May not be the only option, but the safest and cleanest I would say.

    CrazyAnie wrote:
    Also, it would be very kind of you that you might suggest all other possible risk areas where this CHARSET conversion could be a concern.

    I imagine that the main areas of concern will be you are interfacing directly with other databases through database links and using string functions. Otherwise, as long as the manipulation of data is in the same database 10g should not be a problem.

    CrazyAnie wrote:
    I made the migration of my source 9i DB, which is on Solaris to my 10g database which is on Linux and a separate server (which resides in a completely different location) uses exp and IMP. So if I try to export my schema after you change the CHARACTER set and then import it into the target DB, should that help me to get rid of this error? What is an option that can be done?

    I don't think it would be that simple change your database character set, check out this link for discussions about the same:

    [http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:5783936214008]

  • How to insert rows in Board signout to recurring weekly entires

    I need help for create a simple procedure for lines inserted in the Council Signout database for entries "recurring weekly.
    The schema is SIGNOUT in the DEV10G database.
    There are three main tables: UKIMR, the REASONand SIGNOUT
    My first thought is that the procedure takes as arguments:
    -name, surname
    -first name
    -start date
    -number of weeks
    -the type of entry (for example, "telecommuting")
    -Comment
    Note: I use the name as args because that's how columns are configured in the UKIMR table.
    So all it would do is create entries on the same day-of-the-week as the * 'start date' * for as many weeks as you indicate in the * 'number of weeks' * argument.
    So this would be an example of calling script:_
    * exec STP_InsertWeekly ("Lastname", "firstname", October 3, 2008 ', 5, 'Teleworking', null);
    Which would insert 5 rows SIGNOUT for 5 Friday October.

    Published by: user4653174 on October 3, 2008 10:28

    Published by: user4653174 on October 3, 2008 10:29

    Published by: user4653174 on October 3, 2008 10:31

    user4653174 wrote:
    I want to see my procedure to insert rows in the table SIGNOUT. When I run that it is has the below error. The purpose of this procedure is for the employee to enter their name, the date they want to be turned off or work from home, or anything else, until they start, number of weeks (which will determine the number of rows will be inserted each week is a line), and comments that's what they do.

    Interaction with the customer as request for input values, is done in a client tool such as SQL * Plus or web applications. Not in PL/SQL. This just PL/SQL procedure accepts input parameters and can be called from a client application.

    The no data found error is due to a select... IN the statement, which fails to extract a single line. You must decide what you want your procedure to be done in this case. Ignore, not, one other message ease of use or...?

    And please paste formatted code using code tags. You have been told several times now, please the Act itself.

    Kind regards
    Rob.

  • How to capture what oracle object delete rows in the table?

    Hi all

    I have a table in which I am storing data deleted from the main table. I have a delete on the main table statements in the various packages, now I want to capture what sql statement what package is remove rows from the table. I created the trigger to insert data into the backup table. I'm using oracle 11g.

    Please help me...

    Thanks and greetings

    Vidyasagar.B

    You can use DBMS_UTILITY.FORMAT_CALL_STACK.

SQL> create table t
  2  (
  3    no integer
  4  );

Table created.

SQL> create table t_log
  2  (
  3    str clob
  4  );

Table created.

SQL> create or replace trigger t_trig before insert on t
  2  begin
  3     insert into t_log(str) values (dbms_utility.format_call_stack);
  4  end;
  5  /

Trigger created.

SQL> create or replace procedure p
  2  as
  3  begin
  4    insert into t (no) values (1);
  5  end;
  6  /

Procedure created.

SQL> create or replace package pkg
  2  as
  3     procedure run;
  4  end;
  5  /

Package created.

SQL> create or replace package body pkg
  2  as
  3     procedure run
  4     is
  5     begin
  6       p;
  7     end;
  8  end;
  9  /

Package body created.

SQL> exec pkg.run

PL/SQL procedure successfully completed.

SQL> select * from t_log;

STR
--------------------------------------------------------------------------------
----- PL/SQL Call Stack -----
  object      line  object
  handle    number  name
3abbbc6d8         1  anonymous block
3ad03bf88         2  KARTHICK.T_TRIG
3a51a18a8         4  procedure KARTHICK.P
3ac4f1508         6  package body KARTHICK.PKG
3ac91c250         1  anonymous block

  • How to set current row in the table after use the button tab on inputText

    Hi all
    My first post.., I am beginner in ADF and I'll try to explain my problem.

    For now we use ADF 11 g (11.1.1.4), in a jsff page I have a table with a column of inputText.
    On the the inputText valueChangeListener, I invoke a method in a bean viewScope that call an EJB method, make some services to the EJB on the modified line. After that, I update the VO and the table (because other values in the row have been changed) and reset the focus on the inputText even modified by the user with javaScript, because the focus was lost after updating.
    So far, everything works fine.

    When I use the arrow keys to change the selected line in the table, this is excellent work (focus is always in the inputText next or previous), but if the user tries the key tab allows you to change the current line, the inputText on the line that has the focus, but the current row in the table is not changed (I think that is normal).

    My question: How can I change the current line after the tab key in this case?

    I don't know if it is really clear, not easy to explain, do not hesitate to ask for more details.
    Thanks in advance.

    Hello

    My question: How can I change the current line after the tab key in this case?

    Use a client event to listen to the keyboard entry and intercept the tab. Use af:serverListener to call the server to set the rowKey on the table and deliver a PPR for the table to repaint

    See example 11 on http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html#CodeCornerSamples

    to learn more on how to use the client listener and the receiving server

    Frank

  • Insert rows in the PL/SQl table

    Hello
    I have a PL/SQl table that I filled through bulk collect and now I'm trying to loop through the table (actually quite a few nested loops)... Now in one of my curls, I might need to insert a new row by splitting the field in the existing row in the table. Can I insert the line in the pl/sql table in the loop without affecting the "FOR i IN tab.first... Tab.Last' loop?
    Also, what would be the index of such a line inserted into the table. Can I access it with tab.last + 1 (doesn't look like it can be done if I insert into various levels of loops).
    OR
    If I insert the lines insde loops nested, then I can access the new lines as soon as I close all the loops and open a new loop? The new lines will be at the last table.

    Any help will be appreciated...

    The expression v_arr. LAST gives the index of the last entry, so you can refer to this element as

    v_arr(v_arr.LAST)

    Then the attributes of this element will be

    v_arr(v_arr.LAST).attr

    for example

    DECLARE
    TYPE table_defs_tt IS TABLE OF user_tables%ROWTYPE INDEX BY PLS_INTEGER;
    v_mytables table_defs_tt;
BEGIN
    SELECT * BULK COLLECT INTO v_mytables
    FROM   user_tables
    WHERE  ROWNUM <= 100;

    DBMS_OUTPUT.PUT_LINE(v_mytables(v_mytables.LAST).table_name);
END;

  • How to adapt the rows in the table spans several pages in proportion to an image?

    Hi all

    I have a fairly large excel file (more than 2000 lines) imported, and the resulting table spans more than 150 pages.

    The problem is that the lines don't always fill the height of the text block (height of 9.5 ") on every page.

    I don't like that the lines are of different sizes. I want just the lower edges of tables on each page to be in the same place.

    By dragging the line down with the SHIFT key does not work if the table spans several pages/text blocks.

    Is it possible to force the selected lines (or stored in a block of text) proportionally fill their block of text?

    It is really not any function automatic adjustment that apply at the height of the row in the table directly, then I suspect that you're not going to find a way to do this is automatic.

    If it was my document, I would consider (something like) do this:

    Find the highest line in the table. (Or, perhaps that if there is some exceptionally high lines; unobtrusively manipulate them and use the 2nd or 3rd highest line as a reference.) Calculate the number of lines (max number of) of this size will fit in each text block. Divide the height of the block of text by this number to get a line height that adapts the same number of lines in each image. Then, select the entire table and all rows from this height. Follow up with the typographic settings that help uniform line height look resolutely.

Maybe you are looking for

  • I'm not able to run a Windows Azure application

    I have a very strange problem. I'm not able to run an application in windows azure has a WCF service and mschart inside. Here are the steps to reproduce the error: (1) create a new windowsazureapplication with an empty asp.net webrole(2) now to add a

  • Toshiba Satellite L300 - 17L driver Lan Wireless

    The driver that I downloaded from the site does ' t work... I can't access my wireless network also FN + F8 do not work... Please let me know

  • Satellite A200-1N1 - how to enable the AGP?

    Help me, please! My English is very bad. My laptop: Toshiba Satellite A200-1N1, OS: VistaMy problem: when I open the program, message: "* WARNING * + the game can not be consistent because AGP is disabled." "Please enable AGP for consistency.My quest

  • Scanning for the graphic of wave speed

    I inherited this application and am a beginner in LabView. I hope that someone can give me an idea about the problem, I'll have. The application initially data displays using a set of waveform diagrams (plot of scanning). I need to add a new card gam

  • Authorized SP2 my desktop computer

    I have installled this new update and when I loged in for the first time after that I came to see my entire office and all files on this subject have disappeared.