How to learn Exadata? Didactic material useful and practical pointers practice?

Similar Questions

• How can I add 'Volume control' button and 'full screen' skin to read?

  I'm working on the CP5. I would like to add my .swf file playback control bar. But in the skins of CP, I can't find the "Volume control" and the button "full screen". So how to solve this problem? Thank you very much.

  Welcome to our community

  Sorry, but Captivate has never offered Thos options. At least not as options of the PlayBar. Captivate is offers an option for full screen, but you should choose at the time wherever you post your output.

  

  If you want a Volume control, Captivate 5 offers a Volume control widget, that you can insert into the project.

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• I need to learn how to remove trojan my computer files and the registry.

  Original title: cleaning your pc

  I need to learn how to remove trojan my computer files and the registry. There is a financial has now attached ittibu or something. and how to remove the event source errors and all that is connected to this.

  If you make financial transactions online and feel your system has been compromised, the more experienced people will recommend wipe you your HARD drive and reinstall your XP from scratch, but that is not always possible and of course is up to you depending on how you feel about this (you need to feel good about it).

  If you still think your system may be achieved a malware, I would do these things before you start any troubleshooting effort:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Download and run Hitman Pro here and during installation to be 100% sure to refuse the installation of toolbars, decline any e-mail options, nothing to do with Bing or MSN, perform a scan time, accept no e-mail and activate the free license:

  http://www.SurfRight.nl/en/downloads/ (make sure you get the free version)

  Download and run TDSSKiller from Kaspersky:
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  The scans by operating clean, then to solve any problems.

  If you still think that you have any questions, then proceed as follows:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you need help interpreting your logs in Event Viewer, follow these steps:

  Here is a method to display specific information about individual events.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

• Looking for help to find articles or resources to learn more about how to migrate to a new computer and also upgrade CS5 to CC at the same time. Can I migrate and then upgrade?

  Looking for help to find articles or resources to learn more about how to migrate to a new computer and also upgrade CS5 to CC at the same time. Should I migrate and upgrade?

  You don't want to think in terms of migration when it comes to Adobe software.  You must install using installation files.  There is no need to have installed CS5 unless you plan to use it.  There is no way to upgrade of CS5 at CC, there is a reduced plan should soon be interrupted.  You get the first annual subscription for almost half of the normal price.

  Creative cloud plans

  https://creative.Adobe.com/plans

  Director of the installation:

  Download/install the desktop application, connect and install applications subscription.

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• My iPad was stolen and exchanged by another how can I know who is using mine

  My iPad was stolen and exchanged for another how can I know who is using it?

  You can use Find iPad to see the location of the device if it is connected to the internet

  Do NOT you go after him - give the information to the authorities

  If you have an iPad that was initially not yours - you can enter - in other words - past the lock of activation?

• How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  Keep all the files on external hard drive image?  Nothing else and no pictures on the desktop?

  Keep all image files both places?

  What is the best way to go through thousands of images in the Organizer to identify and place them in files?

  Once I've placed a file, I just leave it in the entire catalog or a way indicate to me that it has been sorted?

  As overwhelming, any tips/shortcuts/schemes, you can offer are welcome!

  As I only have the version of the EP, here is some info on the organiser:

  https://helpx.Adobe.com/Photoshop-elements/how-to/use-elements-Organizer.html

  Independent of how this feature works, you want to have your photos in one place and have a backup (second copy) somewhere else. All hard drives will not be successful at some point - some more early, some late - never trust to have your files in any safety devices if they are on a single disc. Once you have your sorted, it would be useful that you will organize/name/tag new photos immediately if the task is relatively short and simple. I copy my photos on my internal hard drive for my camera, take a quick look with preview to see who needs some changes and then decide where to put them - either drop them immediately after naming them or bring in an editing application and then file them away.

• Using Labview and PXI-4461, how can I AO0 output Signal Square and AO1 output waveform

  I am using PXI-4461 and Labview, boredom, generating 2 signals simultaneously.

  How can I get AO0 out square and exit AO1 SignWave?

  Help, please. (The example Code would be nice)

  Thank you.

  Create two signals and make a table with them.  Use DAQmx Create Virtual Channel to create two channels.  First waveform will be sent to the first string, second waveform on the second channel.

  I understand not all as calendar, clock frequency, amplitude, trigger and other parameters.  You can add these things.  This is just a basic example.

  

• OfficeJet Pro 8500 a Premium: How can I preset the trays used for printing and copying?

  I love this machine except for one thing. It takes the paper for printing from the lower drawer. So I used the top plate for single supply of envelopes. Then I'm going to copy something and it makes me put the paper in the upper tray, when the lower plate is full!

  How can I determine if just use paper in the lower tray for copying too?

  Hello

  You should change the copy settings to use the 2nd tray, then you can set it as default:

  1. Click the copy on the front panel of the printer.
  2. Click settings.
  3. Click Select status bar , and then select tray 2.

  You can set the default tray by selecting set as new defaults in the settings menu even.

  Shlomi

• To uninstall a game I had on the trial basis free of charge but says "corrupted Installer? How can I uninstall this game I can not use and don't need?

  I need to uninstall a game whose free trial period has expired. Uninstall cannot complete and he asks: corrupted Installer? "How can I uninstall this game I can not use and don't need?

  Re-install and then uninstall it. If you can not re - install Revo Uninstaller Portableuse of reason.

• How to build square 3 ph pulses and use them to trigger the two analog inputs.

  Task:

  1) generate continuous 1 Hz ms 45 pulses on three lines of output offset 120 degrees.

  Other neighborhoods, three phases (three outputs) 120 degrees out, but instead of sine wave should be a volt 5ms 45 along with a second ground pulse. I need these impulses to control an external circuit. The tolerance of 1 Hz is loose, but 45 ms must be at 100 us.

  (2) measure (trigger) two independent DC voltage over 45 ms 50 ms after each front (leader) amount of each pulse. 45 to 50 ms must be 100 us.

  Other neighborhoods, begins each measure 45 ms for the DC source #1 and 50 ms for the source DC #2 after opening (rising edge) of each pulse for total of six measurements per second 1 (by 1 Hz cycle).

  (3) an analog output must provide ongoing (to be booked) negative DC voltage to be used as a source of supply for external circuits.

  I timely when I can generate the 45 Hz by using CO (0) 1 ms pulses continuously and the trigger I (0) on falling edge. I (0) is hard wired to triggering I (0).

  How I do HAVE another (1) and two other lines (two phases) and link them to HAVE (0) and HAVE (1)?

  Equipment: LabView 8.6.2, PCI-6221 (37-pin)

  Hi behappy.

  Thanks for posting and welcome to the forums EITHER! I think we can get what you need with the variety of the 6221 37 pins:

  (1) our machines of the M series have 2 counters, so you cannot generate all the impulses of 3 of these alone. A solution would be to use outputs digital correlated.

  Unfortunately, the 37 pins 6221 has only two IO digital correlated, so you should use a strange mixture of digital meters and IO to implement three impulses. It would still be feasible - for example, you might use a counter for a time base for the digital i/o lines and the other counter to the third output pulse. You would have to match the beginning of the two counters to ensure the phase of your signals.

  2) there are essentially two parts to this question, so I'll try to split:

  (i) combine the three impulses together to generate a single sample signal out of. I think this would be doable on a different set of M with a higher number of digital I/o lines correlated using change detection (see the user manual of M series). However, at this stage, we are just out of digital lines correlated to use, and I don't think that's possible on the 37 pins 6221.

  If you use the 6221 37-pin, which you will probably need to do is to provide your own external circuits OR three pulses together.

  (II) get the 5 ms delay to enjoy your second channel. Since you have already discovered that you can sample the falling edge of the digital signal for the delay of 45 ms, you would just add another delay of 5 ms before taste you your second I. You should be able to do this by setting the clock to convert DAQmx frequency (5ms corresponds to 200 Hz). The clock to convert, it's what actually sampling data (keep in mind that the boards of the M series are multiplexed).

  To do this, simply use the property calendar DAQmx node, then select: more > converted > rate.

  (3) this one is easy - we have not yet used all channels of AO.

  So the 37 pins 6221 is a little less ideal because you have not enough correlated digital i/o to make the generation of pulses or change detection - but he has yet to do the job if you can combine the three impulses yourself outdoors and don't mind not using the additional counter to generate the third impulse.

  I hope this helps, if you need any help to find relevant examples, please do not hesitate to post in return. Thank you!

  -John

• How to finalize a disc (CD - R and DVD +/-R) using Windows?

  Hello:

  How to "finalize" a disc (CD - R and DVD +/-R) using Windows?

  I want to finalize the disc... not simply close the session/disc.

  What I read in the help Windows, "closing" allows me to write on the disc later.

  Is this true, if the disc is just R, RW not?

  I burned the JPEG images (.jpg files) on CD - R and DVD + R discs.

  When I try to read them in my Sony CD/DVD player, it does not recognize the discs.

  The Sony user manual said that records must be "finalized", not just "closed".

  What do you mean with Windows?

  I have treid finalize these discs with Roxio Creator Basic, but it does nothing, except eject discs.

  Windows has always said that disks have free space, and the DVD player is unable to recognize them.

  As I understand it, if the disc is finalized, will show him no available free space.  Is this correct?

  Note: The discs work fine on my HP laptop which uses Vista 32 bit Home Premium.  I can see JPEG images.

  Thank you...

  DaleB

  Hello

  See the link in BOLD below:

  Burning a CD
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/burn-a-CD

  Disc burning: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

  Format a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows7/format-a-CD-or-DVD

  Burn a CD or DVD in Windows Explorer
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Change settings for burning a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Center

  Burn a DVD-video using Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

  Close or finalize a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows7/close-or-finalize-a-CD-or-DVD

  ----------------------------------

  Excellent Forum for help with programs and CD/DVD problems
  http://Club.myce.com/

  I hope this helps.

• I am trying to create a RESUME. What program should I use and how I format it?

  I have windows Vista and I am trying to create a RESUME. I was using the word, but now I don't is equivalent to wordpad? I need to know what program I need to use and if there is a model or something already in the program for the format to build a RESUME. Please, be gentle with the answer because I'm a fool when it comes to something like that. Thank you, Jay.

  WordPad is only a small step above the notebook and uses no models or many other advanced features.

  If you are planning to buy Office 2010 in the future, you can get a 60 day trial from here.

  If you have no intend to eventually buy the suite applications Office 2010, I recommend to install the suite OpenOffice free of programs office instead. There is no point installation and software that you don't have the intention of maintaining of learning.

  Office 2010 or OpenOffice can create a resume with style.

• I have two videos that I would like to combine. But the audio part of the second video is delayed, how can I change so that audio and Visual are equal. IM using windows live movie maker. Thank you

  I have two videos that I would like to combine. But the audio part of the second video is delayed, how can I change so that audio and Visual are equal. IM using windows live movie maker. Thank you

  Hello hodginswill,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Movie Maker and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  https://windowslivehelp.com/product.aspx?ProductID=5

• using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Hello

  I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

• How can I display several rows using Horizonatal and vertical field Manager

  Hello

  can someone tell me how I can layout my screen using HorizonatalFieldManager and VerticalFieldManager.

  I want to display the image and text as below:

  Image1 Text1

  Image2 Text2

  image3 Text3

  I have try several times but she can throw the exception of unacaught,.

  can u give me some examples like him.

  I also store image by default when the url does not contain any image

  It works with FlowField but it see as below:

  image1 image2 Text2 Text1

  image3, image4 Text4 Text3

  I don't want to, I want to show as first mention.

  now I work at bb jde 4.6 and I want to support 4.6 and later

  (1) are you IllegalStateException? It's normal if you try to manipulate anything on the screen of a non-event thread stack. If it is another exception, display the details here.

  (2) for your layout, you need a separate HFM for each pair of text-image. Like this:

  VerticalFieldManager vfm = new VerticalFieldManager(VERTICAL_SCROLL ...);
  for (i = 0; i < length; ++i) {
    HorizontalFieldManager hfm = new HorizontalFieldManager();
    hfm.add(new Label(text[i]));
    hfm.add(new BitmapField(image[i]));
    vfm.add(hfm);
  }
  add(vfm);
  

  If you add all of this to a screen with "no argument" constructor (there VERTICAL_SCROLL by default), you can ignore the optimization of resources and add your HFMs directly on-screen.