How to limit the use of data on my wifi router?

Similar Questions

• Limit the use of data on home network

  Hello

  I currently have three computers connected to a wifi modem with two computers running vista and a Mac SL running. I was wondering if it was possible to limit the daily use of computer data? I have experimented with the settings of the router/modem, but there is no built-in feature.

  Modem: 2701 HGV - W (bigpond)

  Any help would be fantastic.

  I have no idea on the SL Mac (you will need to post this question in a Mac forum or contact support Mac), but as far as Vista goes, certain limits can be defined in part by using parental controls and in part by using permissions (but it depends on exactly what you want to say that I am addressing the following).  No process will actually limit the use of network data (although they can help you to set other boundaries that can help).

  In Vista, here is the procedure for setting up restrictions. http://windows.microsoft.com/en-US/windows-vista/Set-up-Parental-Controls. Once you have access to parental controls, and then go to the section of deadlines and follow the instructions there (or for the other sections).  Technically, it's not a way to limit the use of data in itself - if by here you mean the amount of data accessed for a specified period (but you can limit the data that is used, what programs are available, what websites are allowed, when the computer can be used and several other things.  To limit the available data, you use permissions rather than Parental control, but well enough that is already treated as system implements security rights to prevent users other data and you can do this for any folder that you create outside profiles (while the file system are almost already protected - even on your part).  If you mean data over the Internet, then there is no way I know in Vista or IE which limit explicitly by the user.  Keep in mind that this will only work with standard user accounts as account administrator can simply replace the limitations or remove them all.  I know that's not what you asked really, but I thought that I should bring him as he is very much related.

  Now for the good news that you want can be done with the 3rd party software free.  See the following:http://www.ampercent.com/control-internet-data-usage/4572/.  This seems to be exactly what you want and should do the trick.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• If I don't get creative cloud, how will limit the use of photoshop touch?

  If I don't get creative cloud, how will limit the use of photoshop touch?

  I don't think it will limit your work with PS Touch, but could enahnce it a little.

  Just try to free membership of 2 GB and find out:

  https://creative.Adobe.com/plans

  Thank you!

• How to limit the use of my credit card as the Manager of my family-sharing account?

  some of my family members want to use their instead of mine credit cards to make purchases, but when they try to buy something he gets pay directly to my account.

  Apple US

  Purchases and payments - Apple Support families

  
  

  "When you configure the sharing of family, you will be asked to confirm that you agree to pay for purchases initiated by members of the family invites you and you have a way of payment valid on the file."

• How will I know if I am being charged for the use of data on the mini2 ipad

  How will I know if I am to be charged or billed for usage on my ipad mini data 2?

  Hello

  You can be charged for the use of data on an ipad, if it has a SIM card

  Cellular data.

  If your home wifi is unlimited you will not be charged more.

  Unless your WiFi has a hat of data ie download limit.

  See you soon

  Brian

• I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

• How to limit the number of printers can be installed on this computer by using Group Policy?

  How to limit the number of printers can be installed on this computer by using Group Policy?

  Hello

  Thanks for asking! If I understand correctly, you should limit the printers installed on the computer by using Group Policy. I suggest you follow the troubleshooting steps to check if this may help.

  The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How to limit the length of the texts on iOS9?

  Hello

  I just worked on why I am required by my mobile / cell phone provider EA.  They charge any text as a picture message / SMS, it is longer than 120 characters?  Does anyone know how to limit the length of the texts / SMS so that it is impossible to send a more 120 characters or create an alert so that you are aware of the number of characters in the text / sms?

  Thank you very much

  Hello Turnus123,

  Thank you for using communities of Apple Support.

  I see that you will have to pay for SMS more than 120 characters.  To help identify messages exceeds this amount, you can activate a number of characters in the message settings.  Simply go to settings > Messages and activate "number of characters".

  Message settings

  Take care.

• Apps to minimize the use of data in windows

  How to minimize excessive use of data on your computer windows laptop. All the apps to minimize the use of the data. I am currently using Vista and Windows 7 Starter.

  Keep the apps closed when you are not using them. There is no tool for using data on older versions of Windows.

• How to limit the email receipt/downloaded size?

  I need information on how to limit the size of an email received or downloaded in Windows Mail to reduce the cost of the enamel of satellite data. Want to just send and receive, especially to receive emails with no graphics and keep it small.

  Simply set up for this purpose a message rule: tools, Message rules, mail, new...

   

  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------

  "moosehuntingguy" wrote in the new message: * e-mail address is removed from the privacy... *

  I need information on how to limit the size of an email received or downloaded in Windows Mail to reduce the cost of the enamel of satellite data. Want to just send and receive, especially to receive emails with no graphics and keep it small.

  Gary van, MVP (Mail)

• Restrict the use of data - WLAN controller

  Hello

  I am designing a solution for a hotel WiFi facility. This is mainly to provide access to the visitors of the hotel.

  I wonder bandwidth throughput on a per customer basis - which I know can be done on the controller.

  I was also asked to verify if the use of data restrictions may be implemented by the customer.

  For example, they want that the restriction of the use of 1 GB / 2 GB on their visitors, after which they are not able to access the network without additional authorization.

  Is there a way to do this on a Cisco controller?

  Thank you

  Rahul Nair.

  This doco is convenient for the speed limit:

  http://www.Cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113682-BDR-limit-guide-00.html

  In addition, Rasika explains very well vs TCP UDP in a blog:

  https://mrncciew.com/2013/05/01/per-user-rate-limit-in-WLAN/

  Regarding limiting the total data of a user; I don't think it's possible with just a Cisco WLC. You would probably need some kind of third-party tool... I can't find much except this post earlier which is probably still very relevant:

  https://supportforums.Cisco.com/discussion/12101991/guest-WiFi-solution-hotel-industry

• How Golden Gate will use change data Capture (CDC) in SQLserver2008R2

  How Golden Gate will use change data Capture (CDC) in SQL server 2008 R2. How much space it will occupy for each table when it erases the data and what will be the retention period for the tables of the CDC.

  So, here's what happens next. Normally, when a tranlog backup occurs, SQL Server may decide to release the tranlog space after the backup of the log, for transactions that have been committed and saved.

  When you activate a form any replication, like with OGG and allowing TRANDATA, you need to eat this truncation periodically. So with your configuration, even if the log backup occurs over 15 minutes, data in the journal are not allowed to be released after the log backup until the log backup that occurs after the 4th consecutive time of work.

  It is fine if you are not concerned about the lack of free newspaper in 4 hours. Just something to keep in mind.

• How to monitor the use of the Hyperion applications

  Hi all
  We have developed a classical Planning Application in Hyperion 11.1.2
  The application is running in production mode, and now we want to monitor the use of this application, in this regard, I have following questions:
  (1) how to activate the newspapers?
  (2) how to monitor the time of connection and disconnection of each user
  (3) how to check the amount of data entered in a particular week
  (4) how to check that data are entered against how much the faculty members?

  I won't pretend to know what should I know about this subject, but I get this question of a large number of customers. So, here is my answer. There is no right way to monitor who logs and how many times they connect. If you enable the audit DATA, that you can do is to see when a user loads the data and how often they do. This does not match the connection, but planners usually don't connect to display data (which are normally made in EN or SmartView), they connect to load/update of data. With active audit DATA, you can query the HSP_AUDIT_RECORDS table, which is where the audit is stored, and see how many times the user load the data and the last load of data. Is not correct, but it is far more closely than any other method I've found.

  Example of the last connection (really last loaded data)
  SELECT USER_NAME AS 'User', time_posted as 'Last Login Time' OF HSP_AUDIT_RECORDS WHERE TYPE = "data";

  You can use a similar query to count the number of data loads.

  This would also show you what the user has launched it to business rules.

  Another option would be to enable SSAUDIT on the planning application in Essbase (this is done in the Essbase - google SSAUDIT server configuration file). This will create 2 files. The first is a file index or pointer. There will be a line for each record, via a web form or SmarView load. The second file contains all of the loaded data. The first file will tell you that loaded which lines in the second file and what time he did. The downside is that each connection between planning and Essbase uses the ID of the source of data for planning. So, it always shows the same loading data ID and will not be the real of the user who did it.

  Note that users do not have to connect through planning. They can directly connect to Essbase. All financial reports that would be misunderstood by looking only at the planning.

  If you really want the actual load, you really watch the Essbase and Essbase application log files. Would not show you users, but could show you the number of queries, the data loads, etc. You could analyze these logs in a relational table for quick access to the use of the query.

  That's a lot of things to take. Unfortunately, to answer your question, it is not a quick option, "click here."

  Utility to analyze the logs can be found at http://code.google.com/p/jrightlog.

  ------------
  Kyle Goodfriend
  http://www.in2hyperion.com

  Please be sure to assign the post as answered and answers as response or useful if others can benefit from your experience.

• How to find the last update date, time and user of the file field peoplecode

  How to find the last updated date time fields of peoplecode records?
  
  Thank you.

  We can check the update date-time using the following query

  SELECT LASTUPDDTTM IN THE PSPCMPROG WHERE OBJECTVALUE1 LIKE "RECNAME" AND OBJECTVALUE2 AS "FIELDNAME".

• How to check the use of the ram?

  I have 3 GB of ram on my pc, and I want to know how to check the use of the ram in xp pro? is the use of FP in taskmanager? or (k) of the kernel memory?

  I have 3 GB of ram on my pc, and I want to know how to check the use of the ram in xp pro? is the use of FP in taskmanager? or (k) of the kernel memory?

  Yes, Yes... and no. All applications on your computer uses RAM, not only the pagefile or system (kernel).

  What are you really trying to do?

  See http://www.petri.co.il/pagefile_optimization.htm , especially the part under "How Pagefile your system use?"