How to list all the files in a backup job?

Similar Questions

• How to list all the files on my HP/WinVista C: / / drive

  I have a HP laptop w/WinVista & the c: / / drive 105 GB is full of something, I ran Disk Clean & Disk Defrag without positive results! Very confused pirate, thank you for all help to define who I can erase, Ralph

  Ralph

  List them will do you no good.  Find out what their sizes are at will.  There is a neat application called Treesize (by Jam software) which is free and will tell you what that is use.

• How to view all the files on my computer from big to small

  Hello

  could someone tell me how to view all the files on my computer from big to small

  There should be thousands of them. music movies photos the entire batch.

  THX

  Hello

  I suggest that you sort files by size and check if that helps.

  Reference:

  Behavior and change folder views

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

  Work with files and folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-files-and-folders

  Demo: Working with files and folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-working-with-files-and-folders

  Let us know if it helps.

• How to print all the files in a folder without having to open each one?

  Hello

  Can someone tell me how to print all the files in a folder? I often need to print multiple files in a folder and it would allow me to save a lot of time!

  Thank you!

  I've done some testing, and it seems that Windows 7 allows print several files when they are all the same type of file.  So, for example, you can select and print 15 Word documents, but not a Word document and a single PDF document.

  To work around this limitation, you can print each file type separately.  For example, to print PDF files in a folder:

  1. Type *. PDF in the search for top-right box.
  2. For 1-15 files, press on CTRL + A to select all the.
  3. For 16 or more files, select 15 of them (click on the first, SHIFT + click the last).
  4. Click any file, and then click print .
  5. Repeat steps 3 and 4 as needed.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I can download more pictures from a SD card to Lightroom is.  I can download pictures or Aperture but Lightroom CC gives me the error "the following files were not imported because they could be readable." and then it lists all the files on the disc. I sh

  I can download more pictures from a SD card to Lightroom is.  I can download pictures or Aperture but Lightroom CC gives me the error "the following files were not imported because they could be readable." and then it lists all the files on the disc. I shoot in Raw.  I know it's a problem because I see the number of entries when I have the problem of google.  What I don't see is Adobe recognizing the problem OR suggest a solution.  It is a big problem since I have to find ways to get photos in Lightroom.  Can you please tell me what I should do to get my pictures downloaded.  I had no problem before subscribing to Adobe CC when I used 5 Lightroom.

  A changes to privileges stick? Check the folder again. Should look like this - see image. Also check similar to the folder that you copy photos to.

  

• How to list all the users who have the privilege of s/n?

  How to list all the users who have the privilege of s/n?
  
  Peter

  Select * from dba_role_privs where GRANTED_ROLE = 'DBA ';

• How to save all the files associated with a Web site?

  I'm an administrator (but not the creator) of a Web site that I am responsible for the update. I don't have the documentation that I need to do some of my tasks. So I thought that I could find enough simply to save the site from Firefox.
  The last time that I have this (several versions of Firefox there is), there is a command "save under" which would save the main HTML file in your selected folder AND save all the subsidiary referenced files in a single subfolder, so built a local version of the site.
  When I tried this today in v20.0.1, the two options "Save As" only created a single file of the current page with all the original references links on the left.
  Is there another way to 'dumping' of the entire application on my hard drive?

  I initially save as "Web Page, complete"? , but the hrefs all mentioned on the real web site, not to any local versions.

  I also tried the Scrapbook addon. It does not seem to do what I want, but I can't find where it stored all the files. I'll be back with the author of the album.

  PS. Why can't I find setting controls in shape when you enter a question?

• How to list all the users on the Windows 8 Pro welcome screen

  I work for a small company based in the House of my boss of IT services. Because he runs the company, all the computers in the House are on a domain Active Directory (ease of management and control). Because he runs the company from his home, several of these computers are tablets/touch screens for his children, all upgraded to Windows 8 Pro.

  Currently, the default behavior of Windows 8 at startup is to display the Welcome screen showing the last user who opened a session with an option to switch to another user. If "Other user" is selected, a complete login prompt appears requesting a user name and password. This is standard fair for Windows 8, especially on a domain.
  He wants to do me is to find a way to allow a style of Windows XP (workgroup) Welcome screen displaying all the available avatars with user accounts, allowing so a child to click easily their user account and enter a picture password without ever seeing the on-screen keyboard.
  To rephrase: we want the Windows 8 Pro welcome screen to list all the (or specific, if possible) allowing anyone of you users connect to the computer without entering a user name and only enter a password (or picture password).
  I searched the web carefully and it seems that Microsoft can have deprecated this feature in an update of Windows 7 - many people shouting right lose their old welcome screen after an update. I read in the case of registry (removal of corrupt profiles and .default) hacks, security policy settings (interactive logon: do not display last user name = disabled), account policy (control userpasswords2 > uncheck: users must enter a password...) and a few other suggestions that had mixed results, which none apply to the present case , either because the settings are already in place, or because they are not available due to being on a domain.
  I'm open to exploration of any kind of registry or 3rd party software hacks that can provide this functionality. Win8 default behavior is absolutely horrible for tablets - it should be easy for multiple users to connect to a device without using a screen keyboard to enter their username and password. WIN8 is halfway there with passwords of photo, but we still have to enter a user name for all, but the user recently.
  Thanks in advance!

  Hi Jayce Nornin,

  Please be informed that he has no option to list all the users on the Windows 8 Pro welcome screen.

   

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• How to list all the tables that have no data

  Hi all
  
  
  I want to list all the tables that have no data. (registration number is 0)
  
  Someone help me.
  
  Thank you
  Thiensu2810

  Select owner, table_name from dba_tables where num_rows = 0;

  This assumes that the table statistics are COMMON.

• Finder - how to display all THE files and folder without exception names in searches?

  I like Mac OS.  I can't WAIT finder.  I just want that he show me everything that matches my search string - files, folders, images, etc.  Each of them, everywhere on my machine.  I just want it to be simple.  Or point me to a good replacement for Finder program.  I waste so much time trying to find things that should take a simple search...  I looked at all the stupid shortcuts like Shift + Cmd + G, which can't find folders in the directory you are in (why would it be separated anyway?).

  Thank you

  CMD-SHIFT-g is quite a search function. It allows you to enter the path of the folder you want to open. What you think "seeks" the current folder is really thin path. If you enter no previous path information, it looks in the current working directory to the folder name you typed in the dialog box.

  You can set the default search starting location in Finder preferences. I have mine for current folder. Looks like you might prefer "search this Mac".

  

  Typing in the search field in the Finder will search the contents and filename. It will offer to search for chips to match types he concludes.

  If you just want to search for files and folders, but no content file, then use cmd-ctrl-shift-f to search by name (you can adjust this shortcut to the system preferences keyboard).

  If you don't get the results of your research, then perhaps your Spotlight index is corrupt.

  Featured: how re-indexing of folders or volumes - Apple Support

  If this does not work for you, try to find any fileor EasyFind

• Satellite A200-23Z - HARD drive as external drive USB - how to access all the files?

  Hello!

  After losing the motherboard of my Satellite A200-23Z I need save some important files to hdd satellite. With external USB enclosure, I can only access some... Can't see program files, filesystem - really nothing disk system, a large number of files was on the desk...

  How to get full access to all the hard drive? -to all logical drives?

  Please - help... :(
  Ivars

  I put t understand what is happening here. I have old P200 (similar to yours but with 17 inch screen) and when I connect the HARD drive as external HARD drive to my new P500 I have full access to all stored data.
  There is no limitation at all.

  > was a lot of files on the desktop...
  Do you know how to find the right location for desktop?

• How to transfer all the files to another iCloud account

  I have two accounts iCloud and wishes to consolidate all my files in one, how can I do this?

  If you create and use an ID of Apple (without modification) fully nine, you will not be able to transfer anything you bought from the iTunes and App stores the ID of the new, but you can transfer your iCloud data (schedules, etc.) with a bit of patience.

  iTunes and App Store.

  You can think about continuing to use the Apple to iTunes & App stores (as well as iBooks), ID so that you can continue to use your content bought without problems and simply use the new login to iCloud, Messages and FaceTime Apple.

  If you use your new Apple ID for the iTunes and App stores, you will be able to authorize and game previously purchased content from the iTunes store on a computer, but may have difficulty using this content on an iOS device.

  While you won't lose any apps that was purchased using the the previous Apple ID immediately, you will be no longer able to update.

  If the previous Apple ID will continue to be used by a family member who belongs to a family sharing put in place which will include your new Apple ID, you share the previous purchases as well as all other purchases they do under this code from Apple. Be aware, however, that when gift vouchers using sharing of the family, unless that each family member has their own sum of credit from iTunes, the organizer of the family action in place will pay for any purchase made by any member of the family.

  iCloud

  Move your iCloud a data what ID Apple for another is obtained more easily on a computer it is on an iOS device, indeed some aspects of the move possible only on a computer. However, any device you choose to spend your data, you should do so by turning individual iCloud to the wide one-both services and not sign out of the account until all services have been put off and processed. (Settings > iCloud on a mobile system preferences and peripheral > iCloud on a Mac)

  If you have purchased an extra space for iCloud under your previous Apple ID, will not be transferred when you change the Apple ID you use and you can buy new space required under the new Apple ID.

  iCloud Drive. Save the data of your iCloud drive in a computer before turning off this service. You can use the Finder on Mac or through iCloud.com if you use a PC. Just move the data of your new Apple ID, once it is set up.

  Pictures. Make sure you download and keep the originals when you are prompted when you turn off iCloud photo library, you want pictures remain on your device and merge it with your new library when you set up your new Apple ID.

  If you use a photo stream be aware that there may be more pictures on your device that there is in the cloud, flow of photos in the cloud keeps up to 1,000 photos for 30 days, if you have more old photos or more than 1,000 on your device, you can copy them to a computer before turning off the photo stream.

  If you have created a shared albums, you must create them again once you have set up your new ID, all the pictures anyone else like added to your shared albums should be imported into your camera roll/library before you stop shared albums.

  Mail. Once you change your Apple ID, you will have a new e-mail address of iCloud. So that you don't miss any message that is sent to your old address, you can arrange to have passed along it to your new address (or any other address), you can configure to iCloud.com > mail > Preferences > General.

  Contacts. You have the opportunity to add contacts on your device when you disable this service, merge them when you are prompted when you reactivate the service after the signature in your new Apple ID.

  Calendars. You have the opportunity to add calendars on your device when you disable this service, merge them when you are prompted when you reactivate the service after the signature in your new Apple ID.

  Reminders. You have the opportunity to add reminders to your device when you disable this service, merge them when you are prompted when you reactivate the service after the signature in your new Apple ID.

  Safari. You have the opportunity to save data of Safari on your device when you disable this service, merge them when you are prompted when you reactivate the service after the signature in your new Apple ID.

  Notes. You can not record notes easily. On a Mac, you can drag them into another account and then drag them once you have set your new ID, but on an iOS device you will basically need to copy and paste into the new notes when you have configured the new Apple ID, but you will have to share before making notes of the old Apple ID , either by mail or similar messages.

  Save. You cannot save your existing backup you need to start a new once you've set up your new Apple ID.

  
  

  Keychain. Will give you the ability to add passwords and credit cards on your device when you disable this service, merge them when you are prompted when you reactivate the service after the signature in your new Apple ID.

• my lap top is dead how to transfer all the files to my new laptop

  my hard drive of the laptop should be changed, it doesn't have a value for money bought a new computer laptop. How can transfer all files from the old to the new. Thank you.

  Hello

  How you would normally do it is:

  1. remove the hard drive then it slave in another computer - transfer files using the portable computer for the new Flash Player

  2 buy or borrow a USB disk drive hard put in yout case then plug it on your new laptop and read the hard drive like this

  ____________________________________________________________

  But if the hard drive does not have the above methods may not work

  in this case contact data using recovery specialists

  But beware, they are very $$$

• How to list all the vm with more than one network card?

  Hello

  Is it possible to only list all my s vm in my environment with more than one network card?

  I tried using the Get-NetowrkAdapter cmdlet, but could not get the desired results.

  Get - VM | Get-NetworkAdapter | Select-Object Name. ConvertTo-HTML-head $a - body "Virtual Machines < H2 > < / H2 > ' | Out-file D:\vms.htm

  Thank you

  Hello, AGFlora-

  Of course, you can do this with the standard as cmdlets:

  ## using standard cmdletsGet-VM | Select Name, @{n="NumNICs"; e={(Get-NetworkAdapter -VM $_ | Measure-Object).Count}} | ?{$_.NumNICs -gt 1}
  

  Or, if you want to get the results a little (or a lot) more quickly, you can use the cmdlet Get-view as:

  ## fast-like, using Get-ViewGet-View -ViewType VirtualMachine -Property Name,Config.Hardware.Device | Select Name,@{n="NumNICs"; e={($_.Config.Hardware.Device | ?{$_ -is [VMware.Vim.VirtualEthernetCard]} | Measure-Object).Count}} | ?{$_.NumNICs -gt 1}
  

  Those are both by selecting the names of virtual machines and their number of network cards.  Then you can direct this output to Export-Csv, ConvertTo-HTML, what you like.  What to do for you?

• How to list all the system user directories?

  Hi all
  
  
  last month I create the directory for export (data pump). The problem is that I didn't put it in the documentation. I would like to know how I can list all directories (granted and which are created in sqlplus) by simply using the sql statement.
  
  Is there any command for this SELECT * FROM ALL_USERS?;
  
  
  
  would be great if someone can help me

  easy:
  SELECT * from all_directories

  HTH, Urs