problems connecting to unsecured wifi networks of (starbucks, McDonald's, etc.)

Similar Questions

• How can I connect to a wifi network when I get the message 'safety recommendation' when I try to join?

  I have problems connecting to the WiFi at the hotel, as I have upgraded to iOS 10. When I try to join, I get a message "safety recommendation", and then it does nothing else. Prior to the update of the iOS, it would open an another Popup screen that lets me enter the password for the hotel but is not past with iOS 10. How do go?

  Please read use captives Wi - Fi networks on your iPhone, iPad or iPod touch - Apple Support.

  You may need to deselect Auto-Join and/or auto-connect on some networks in captivity. Otherwise, it may seem to connect for a second or two, only to disconnect immediately, leaving you without the possibility to open a session.

• OfficeJet 6600 connects to the wifi network

  Hello

  I bought an Officejet 6600 and effortlessly connected to my wifi network, print and scan for a day. And there are two days that he stopped conntecting to the wifi network. In the meantime, our router turned off and turned back on. That's the only difference.

  First of all, the printer would not even detect the wifi network. I solved that by changing the configuration of the router (Cisco 3925 EPC) and passed under the Setup wireless "Wi - Fi protected setup" to "manual". I can now see the network on the printer again.

  But after that I've selected my wifi network and enter the WPA password, the printer tells me that the network connection is impossible. I printed a page of diagnosis, which told me that the problem is perhaps related to the MAC filter. But I have no MAC filters. I also tried to pass of WPA/WPA2 to WPA only, but that doesn't change anything.

  I also tried to set the mode wireless via the USB cable, but no avail. Everything seems to work, until the moment when he tries to connect to the wifi (screen with 'configuration' with the large antenna and pulses of radio waves).

  Should I give up and bring it to the store? I'm getting desperate!

  Thanks for your help in advance,

  Raphaël

  OK, to make sure I understand - the printer connects effectively to your wireless network, and well it works for a while once the printer goes to sleep, your computer or router may not wake.

  If this is the case there are a few things that we can try:

  1. in the settings of your router, make sure that the multicast is enabled.

  2. set the 2.4 GHz router to 11 channels.  I know it sounds weird, but please try.

  3. set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• What should I do when I can not enter a password when you try to connect to a wifi network

  I'm currently traveling but I am unable to choose a network from the list of networks that appear.  (I entered it from a family computer.) Then when I click on connect, it takes me to the screen to enter the password.  However, it won't let me type the password.  I tried to copy the password of a MSWord document and it copied 8 nine characters, but still wouldn't let me add the last character.  Any ideas?

  I must point out however that I have just went to Starbucks and was able to connect to their wireless network without having to enter a password, and I don't have a problem connecting to my home network either.  Thanks for your help.

  Jim

  Hi Jim,.

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you have problems to access wireless networks.

  This problem may occur if there is some incorrect settings in the network.

  Perform the steps from the link below and see if it helps.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  Answer to us if you are experiencing problems with wireless networks or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Unable to connect to the WIFI network.

  Original title: Need computer help laptop to connect to the WiFi at home

  I have FIOS at home, but my new laptop is impossible to connect to the WIFI in my house, the diagnostic computer wasn't able to fix the problem, what can I do?

  Hello

  1. what exactly happens when you try to connect to the WIFI network?
  2. do you receive any error messages?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  If the problem persists, you try the procedure described in the article and check out them.
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

  Alternatively, you can check the link for more information:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
  http://support.Microsoft.com/kb/871122

  Method 3:

  If the problem persists, you can temporarily disable the antivirus software and check.

  (a) click Startand then click run.

  (b) copy and Paste the following text in the box run command and then press enter:

  wscui.cpl

  (c) in the Windows Security window, click Virus Protection.

  (d) if the software is activated, display information about the antivirus program and note the name of the application.

  (e) click Start, click programs principally made and then look for and run the anti-virus program.

  (f) temporarily disable the software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information helps!

• Why my laptop is not to connect to a wifi network secure?

  My laptop connects to the wireless networks unsecured, but do not connect to secure wifi networks. Is it because he is my Windows 7 Service Pack 1?

  Dear Jessen

  When I changed the password to the default password that has been provided by the manufacturer, it worked.

• How can I see who is connected to my wifi network?

  How can I see who is connected to my wifi network?

  What is the brand and model of your wireless router that produces your Wi - Fi network?

• How can I install my laptop to connect to a WiFi network instead of my default dial-up line?

  Hello...

  I have for the implementation of many laptops for a Webinar tomorrow morning; but at least one of these computers keep trying to connect to its range of dial-up default instead of local WiFi Hotspot.

  How can I get this laptop to connect to the WiFi network?  It's an operating system XP, with IE-8.

  Thank you!

  edv7028

  Hey,.

  You can see the article below with the instructions shown on the definition of a default network on your XP machine.

  http://support.MI.RAS.ru/wireless/windows_xp/English/

  I hope this helps.

• Irregular problem connecting to the wired network

  My Windows 7 PC has an irregular problem, connect to the local network of cable through a provided network of the netgear modem/router.

  The connection timeout is the question and sometimes takes a while four two minutes or more.

  A reboot of the pc never seems to resolve but (quite often, in fact usually) will be a restart of the modem.

  The modem is always on (as the announced network connection is supposed to be).

  The network provider has replaced the modem, and the problem persists. This leads me to believe that there is a start up or similar problem with the pc.

  I ran the troubleshooter in windows... no chance/results. Is there a "fixit" tool I could try or something similar?

  Happy to clarify, to provide more information and appreciate any input.

  concerning

  Lethal42

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to refer to the link below and check if this is useful:

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  Hope this information helps.

  Sincerely,

  Ankit Rajput

• I have problems connecting to my wifi... it is my modem or is it the computer card that is faulty?

  I have problems connecting to my wifi... it is my router or is it the computer card that is faulty?... There are moments when the appropriate lights are on, but the router says touble shooting is out of reach... or the adapter needs to be reset...?

  If you have access to different PC, try to connect by using this PC to check if this is a problem with Wi - Fi or your PC.

  Try to reset your router and reconfigure.

  If she asks to reset the adapter to your PC, please follow the steps and do.

• Mini 210-2130NR: impossible to connect to the wifi network driver missing

  I recently did a clean Windows 7 on my mini installation because the upgrade of Windows 10 left essentially unusable. I managed to install windows 7 Professional on this topic but I am not able to connect to my wifi to do updates. In Device Manager it says missing a network controller and video controller. I was able to find an adapter (Realtek PCI FE Family Controller) but I need help to find the others. I tried looking for drivers available under my product on the HP site, but she had something specific to Windows 10.

  Device Instance path:

  Network controller: PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01\4 & EDE306C & 0 & 00E0

  Video controller: PCI\VEN_8086 & DEV_A012 & SUBSYS_1584103C & REV_00\3 & 21436425 & 0 & 11

  Thanks for any help!

  Hello:

  You need these drivers...

  Network controller:

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp57965.exe

  Video controller: you have posted you are running W7 64 bit, but your laptop came with W7 32 bit.

  You must use the driver directly from Intel 64-bit for the 64-bit version.  a 2nd on the list.

  Note: I think the Intel driver site is messed up because when I click on the link to get the driver, nothing happens, and this happened to me twice today.

  You may need to wait until after July 4 holiday to get the driver if you have the same problem.

  http://www.Intel.com/content/www/us/en/support/graphics-drivers/Intel-Graphics-Media-Accelerator-3150-Intel-GMA-3150.html

• G5E22EA #A2N: unable to connect to the wifi network

  When I turn on the wifi in my HP Pavilion 15 laptop pc and try to connect to my network of your choice... it says "check and connection. After a minute, it says "cannot connect to this network '...

  I tried to use the other pc and smartphones to connect to my network of your choice via wifi and they connect successfully and I can use wireless net in other devices!

  Hello @Khaled-819.

  Thank you for your query,

  I understand that you are unable to connect to your wireless network, but other devices connect correctly.

  Have you ran the Windows troubleshooting tool?

  Did you run the Internet functionality and security in HP Support Assistant ?

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  If you are unable to connect I would test for a hardware failure.  You will locate network under the title of part.

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  To say thanks for the reply please click the thumb up below.

  If you were now able to solve your problem please click on accepted the solution to help others.

• HP Deskjet 2540 all-in-one: printer stopped connecting to the wifi network

  Hi, my printer has suddenly stopped detecting my wireless network. When I turn on the printer, wireless blue light continues to blink and there is an exclamation point on the screen of the printer. I still have the same wifi network as before and have not changed it or its parameters. I have not physically moved the printer and the wireless works fine for all computers, iPads, and phones.

  I tried to uninstall and reinstall the HP Utility Set Up software but it couldn't detect the printer to set up.  I also tried running the diagnostic results, but all the results, said 'Not work', 'Not applicable' or 'None'. I can't even an IP address for my printer.

  My laptop can detect the printer if I turn on the wireless Direct button and I connect to this network on my laptop, but that's all. I'd rather connect the printer to the wifi so I can print from all my devices (phone, iPad etc.). The printer is less than 6 months and I do not understand what is the problem with him. Can you please specify?

  Hey @Sue1990,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that the all-in-one printer Deskjet 2540 does not connect to your wireless network. I can help you with that.

  To connect the printer to your network again you will need to run the USB cable from the printer to your computer Mac OS x 10.7. This makes the open Applications, Hewlett-Packard and inside this folder you will find a program with a similar name to the installation wizard. If you run this program, then you will find options to connect your printer to your wireless network.

  Please let me know how it works for you and let me know if you have any questions.

  Have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• HP laptop could not connect to the WiFi network

  My HP Pavillion G6 connects to the Wifi/Home network. It worked fine until recently. It can see the network but will not connect. My product number is C9M83PA #ABG. There running Windows 8.1. Very frustrating. Help, please

  Problem has been fixed. It seems that HP and Windows 8.1 did not get along! After you connect the laptop to the internet via an ethernet cable, I was able to use the HP Wizard to download the updates. I then rebooted both the laptop AND the router and everything works.

• Problems connection Canon SX280 WiFi for Windows 7 (64-bit)

  I hope someone can help me.

  I recently bought a Canon SX280HS that has possibilities of wifi, and I'm having a problem connecting to my laptop.     I use a laptop Dell Inspiron N7110 running Windows 7 (64-bit).   It connects to the internet and a printer wireless via a pretty new without and problems at all Netgear wifi router.    This laptop also has Intel (R) My Wifi Technology, and I can access the utility to it via the control panel.

  After installing wifi set up the software provided with the camera, I first tried to connect the camera via the Netgear router.   After putting in the correct encryption key (I did this many, many times), he search the device, but it is never and eventually times out with a "communication error" and "device not found."

  I was ready to return the camera to Amazon...

  But then I tried to connect the camera using the Intel(r) my Wifi utility.   I activated the technology, put in the correct encryption key, and the cannon appears on the users list, showing its MAC address and a wifi signal strong.   The camera then sees the name of my Dell laptop, but when I try to connect it, all I get is 'connection '.  Finally, it ends with a "communication error" and "connection failed."

  At this point, I find the wifi on the camera works properly because it clearly links to the Intel(r) my Wifi on my laptop.

  Can someone tell me how to configure my laptop to allow the rest of the connection?     Oh, I tried this many times with my anti-virus IT and OFF and my firewall ON and OFF, and it does make a difference.

  Thanks for your help.

  Had the same problem with the same device under Windows. For me, I fixed it by going to control panel > network and sharing Center > view network computers and devices (this, while the camera tries to connect to your PC. I then click with the right button on my camera icon and click "install". Also, make sure that 'file and printer sharing' are on (my PC actually invited this). Don't know if this will help, but worked for me. Can now import wireless!

  All the best,