How to load the CMOS (get the Bios settings) on Lenovo IdeaCentre K330

Similar Questions

• Dynabook: How to enter the BIOS settings?

  I have a CRC Dynabook V2/470. How can I get into the BIOS
  settings on this laptop?

  Hello

  This device is not known to me, but I guess that you can enter the BIOS setting by pressing the F2 key or ESC in combination with F1.

  Good bye

• Satellite P50T-A01C - how to enter the BIOS settings?

  Can someone tell me please how to enter the bios on the Satellite P50T-A01C
  I tried fn f2, f10, delete, not go...

  Does anyone know how to get?

  Thanks in advance.

  If you use Win8, you must proceed to a full stop, and then after the new departure enter the BIOS settings.
  Please check - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  Try to please and post comments.

• Satellite C55 - A - 19(d) - how to enter the BIOS settings?

  Hello

  I recently bought a * laptop Satellite A-C55-19 D * with no operating system preinstalled, so I installed Windows 8.1.
  My problem is that * I can't get to the BIOS menu *.
  I turn on the computer, but I can't see any invitation to "press F2 to enter setup". I get only a screen that has just the + Toshiba Leading Innovation > + notice, then the Windows 8 points of spinning...
  I could type or hold F2, F12, ESC, DEL, but nothing is coming. I also tried to press the Fn + F2 key combination.
  What I have to enter the BIOS setup?

  Thanks in advance!

  Proceed to a complete stop as described here - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  After that restart your laptop, and then press F12. There you should be able to enter the BIOS settings.

  Check it out.

• How to change the BIOS settings to read the Norton CD?

  In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

  In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

  You may or may not need to change the BIOS settings.  Assuming that you have a bootable CD with this tool, put it in your CD drive and restart the computer.  One of the 3 things will happen:

  1. the computer starts from the CD and you can follow all instructions you have Symantec.

  2 watching very carefully that the computer starts.  You may see a message that says something like "press any key to boot from the CD-ROM.  If you see this message, press a key (for example, the space bar) and the computer boots from the CD.

  3. watch very carefully that the computer starts.  You will see a message that says something like, "to change settings, press F1."  The key that you press on will be different depending on your particular computer.  It might be F1 or F10 or del key.  Whatever it is, press this button and you will enter the BIOS configuration utility.  From there, you can change the boot order to CD first.  Directions to navigate the BIOS Setup will be displayed on the screen, but they will involve using the button tab, enter, and arrow keys, because your mouse does not work in this utility.

  You can also take a look here: http://www.bleepingcomputer.com/forums/topic228631.html

• How to enter the BIOS settings?

  I try to format my machine... but when I got to get into the Bios if I change to boot from the cd.
  I don't have the option to touch anything like F10 or del

  I think the laptop is set to fast boot or something. It's the jump passed the test of memory.
  How can I get the Bios or activate the test of memory, so I have the option.

  Any help would be awsome (Y)

  Bowers85

  How is - someone must provide information or help you without any information on your laptop!
  What camera do you use?

  By the way: If you want to start on the CD you can press the C key immediately after starting the laptop or press F12 and you will get the boot menu

• Satellite A40-151: how to enter the BIOS settings?

  Hello...

  I'm on Toshiba Satellite A40-151 the DVD for this broken but this isn't worth it.
  The problem is that I can't enter the setup (BIOS) to boot from a different boot device, or I do not now how to enter.

  Help, please

  thanx

  Hello

  I think you have a Toshiba BIOS.
  In this case you must press the ESC key immediately after the laptop has been powered. Try to press the button several times

  By the way; You can also use the F12 key to get the boot menu.
  Then you could easily choose your boot device
  This also works

  Good bye

• How to enter the BIOS on Satellite U200 settings?

  How can I get into the BIOS menu until windows has started?
  When the laptop starts up, I press F2 so he give chose device which need to read.

  In my other pc I push DEL and the BIOS is here.

  I have the Satellite U200. I have software called and write BIOS version 1.10.04/03/2004

  There must be key to enter the BIOS settings.

  To wear? s manuals I na? find information about entering the BIOS settings.

  [email protected]

  Hello

  To enter the BIOS settings, please press the ESC key at startup upward. After that, press F1.

  By the way: when you start the laptop for a moment you can see the message how to enter the BIOS settings. It is displayer downstairs left at first upward.

  Button led will be used on desktop computers, not on laptops.

  Good bye

• How to enter the BIOS on my L50 A k4W Satellite settings?

  Help me pls! How to enter the BIOS settings? I don't know, and Google doesn't help me not =;)

  As a first step, you will need to perform a complete shutdown.
  Here's a HowTo:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  The fact is that Win 8 keeps the laptop but the unit carries out hybrid stop start up more quickly. Unit should be stopped in order to access the BIOS.

  Recommencer start laptop, then press F12 to get into the boot menu. You can you find the option for the BIOS settings. You can also try with F2 at start up.

• How to access the BIOS on Satellite A110-195 settings?

  How to access the BIOS settings (CPU, video memory ect). I have http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&PRODUCT_ID=1 18639

  At the start when the Toshiba start screen appears press F2 repeatedly and you should be able to enter the BIOS settings.

• How to enter the BIOS on Equium L10 settings?

  Please can someone tell me what I press the button too enter the setup of the bios at the beginning when I turn on my pc cos I tried everything, but nothing works.

  Hello

  Whenever when you switch the laptop you see on the low left hand site short instruction how to enter the BIOS settings. In your case you must use the F2 key. Please, keep it down immediately after switching on the laptop.

  Generally, Toshiba laptops come with two different versions of BIOS (producer of BIOS):

  -TOSHIBA BIOS: enter using the button ESC and F1
  -Phoenix BIOS: enter using the F2 key.

  According to the specs of your device has Phoenix BIOS.

  Good bye

• How to access the BIOS on a Pavilion Elite e9237c with mouse and keyboard wireless?

  I have a desktop computer Pavilion Elite e9237 with a wireless keyboard and mouse. I tried to access the BIOS by pressing F10 at startup with no luck, and I can't access any of the other menus for the start-up eiither. I don't have a PS/2 port on my computer, so I can't get a wired keyboard and mouse. Does anyone know how to access the BIOS with this configuration?

  I bought a USB keyboard and he answered in the same way... No bios access. I then studied why it did not work and discovered that it was the way in which he has been connected to the computer. I had initially plugged into a USB hub when he was not working and I moved it directly into a USB port and it works! I plugged my keyboard wireless directly into the USB port and it works too! Thanks for your help... I wouldn't have thought of it if it wasn't for to recommend you the USB keyboard.

• Satellite L50T-A196 - how to access the BIOS

  Hello

  I just bought a new laptop Toshiba Satellite L50T-A196 and it worked very well and the great until recently.

  I tried to reformat my computer because it got crashed.
  I was able to reformat my computer very well in previous years.
  So far, I've reformatted my laptop more than 5 times, but that it was like 1 year ago and now I really don't know how I got into the BIOS menu.

  I tried pressing F1 to F12, holding them and also repeatedly pressing it.
  Also tried pressing F2 and F12 or ESC + F12 F2 before even looking at computer and then turn it also I tried pressing 0 too and also ESC and the ~ button.

  Nothing seems to work.
  So my question is how to enter the bios?
  I used to be able to get, but now I don't know what happened

  Help, please!

  Hello

  _Firstly! _
  You need to perform a full stop down.
  Here's a HowTo:
  [Perform a complete shutdown in Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]

  The fact is that Win 8 keeps the laptop but the unit carries out hybrid stop start up more quickly. Unit should be stopped in order to access the BIOS.

  After the unit is OFF, turn on again and press F2.
  Now you should be able to access the BIOS

• How to access the BIOS on my Satellite 5205 settings?

  Hello

  I have a laptop of s703/5205 series of satellites. How can I access the bios settings? When I switch on I get the screen "Welcome to toshiba." There are some keys I press during the boot process? On my other laptop I usually press 'DEL' or 'F2 '.

  I would be grateful assistance as my portable computer touchpad and, when connected, the external mouse freezes during normal operation. Sometimes I can navigate with the keys alt & tab, sometimes everything crashes. Also I get error messages saying "device connected to the usb port not recognized" Although there is no device attached to my laptop. I tried to plug an external mouse to see if that solves the problem of touchpad but the mouse freezes also.

  I need to check the bios settings, bios access help would be really appreciated!

  Thank you all!

  Hello

  The keys to use are dependent on the age of the laptop and also what manufacturer of BIOS you have.

  Usually by pressing ESC will show the progress of the BIOS during the startup phase.

  Pressing F2 usually you will take in the BIOS Setup menu, press F8 brings you to the 'Start' menu (where you can select the safe, etc) and finally F12 will give you the selection of "Boot Device" menu where you can select the hard disk, CD-Rom, etc. as boot device.

  HTH

• Re: How to enter the BIOS on Satellite C50 - B

  Hi guys!

  You just purchased Toshiba C50 - B, it's * laptop computer test I've ever seen, not recommend to anyone, avoid this brand at all the... 15 days, I tried to get into AD BIOS anything yet this completely useless, not even no CD in there!

  I assume that you are not informed sufficiently how it all works and your opinion is, unfortunately, based on low level of information about Win8/Win8.1.

  As a first step, you must perform a complete shutdown of Windows. How to do this you can read in http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm

  After that restart your machine and press F12 to get into the boot menu.
  Here you can choose the boot device and also find option settings to enter the BIOS settings.