How to make a hollow functions var?

Similar Questions

• How to make a components functions or eventhandlers visible from the outside

  Afternoon,

  I created a custom component with some public functions called function1, function2 function3 (no real names) my question is I am willing to do the below

  < custom: Com1 height = "100%" width = "100%" function1 = "{this.someFunction}" / > "

  problem is that the function1 is not visible outside Com1,

  My second question is how do I mark my functions as events, so when you look at intellisense they lightning rather than methods I think that the two are closely linked.

  few things are more my code for all my components is separated from my mxml via setting one actionscript actionscript for the parent class, and the class extends hbox or application. hope this makes sense, I am a vb developer not an actionscripter, which is probably why I'm doing something obviously wrong...

  Thanks in advance for any help

  See you soon

  Tom.

  1. you must tell you all that this component has events

  [Event (name = "showPreview", type = "flash.events.Event")]

  2 dispatches the event when it comes

  private void clickHandler(event:MouseEvent):void

  {

  var eventObject:Event = new Event ("showPreview");

  dispatchEvent (eventObject);

  }

  3 listen to the event from outside the component

  customComponent:Component showPreview = "showPreviewHandler (event)" / > "

  4 handle the event.

  private void showPreviewHandler(event:Event):void

  {

  }

• How to make a generic function?

  Hi all

  I am using oracle 11g.

  My question is how can I do a generic function to escape some special charecters.

  Currently, I use this way.

  Select Replace (replace (replace (FACILITY_ADDRESS,'-','-'), "','------" '),'"','------"') installation;

  above, I give for a column, in the same way, I do for some more columns

  so I need a generic function, and I'll use this function in each columns that depends on the State.

  Thank you

  Dale

  search for deterministic function?

  create or replace function repl (p varchar2) return varchar2 deterministic as

  Start

  return replace (replace (replace (p, '-','-'), "',' \" ') ', ' "' ','------" ');

  end;

  ----

  Ramin Hashimzade

• How to make a simple function on the liberation of a mouse AS3.0?

  so its been a while that I was Flash Professional and I'll have to re - educate myself in almost everything. what I want to do is to create a simple function of the liberation of a mouse click vs what is the command to access freedom I know the click is MouseEvent.CLICK, function, but what is the command to access release on?

  You probably want to use MouseEvent.MOUSE_UP (which is what happens to define the end of a CLICK event)

• -How to make 'save &amp; print' function work? -silverlight on mac

  I have a mac, 10.9.4. I use silverlight with browser safari 7.0.6. Everything works fine. I can not just save and print.

  Does anyone have any suggestions?

  concerning

  Hello Smittychat,

  I am now using firefoxbrowser. Saving and printing works very well.

  I enjoyed your frequency

  concerning

• How to make a SUM function on table with TI-auto

  Hi all
  I created a table with column 2:

        CREATE TABLE Suppliers
  
        (
  
            Id                     NUMBER(10)              PRIMARY KEY,
  
            ProductNum       NUMBER(10)              NOT NULL,
  
            Amount             NUMBER(10)              NOT NULL
  
       );

  Example: I have these data in the table

  ----------------------------------
  
  Id|ProductNum|Amount|
  
  ----------------------------------
  
  1|      4A        |    50   |
  
  ----------------------------------
  
  2|      10Q      |     3    |
  
  ---------------------------------
  
  1|      4A        |    40   |
  
  ---------------------------------
  
  3|      Q9       |     32  |
  
  ---------------------------------
  
  2|      10Q      |     60 |
  
  .          .                .
  
  .          .                .
  
  .          .                .

  And I want a query to get the sum of the amount of each product, that is if I run this query o the previous table, I expect the following result

  ------------------------------
  
  ProductNum|Amount|
  
  ------------------------------
  
  4A            |     90    |
  
  10Q          |      63   |
  
  Q9            |      32   |
  
  .               |       .    |
  
  .               |        .   |

  Thanks in advance

  Something like this->

  select ProductNum, sum(Amount)
  from Suppliers
  group by ProductNum;
  

  Kind regards.

  LOULOU.

• How to make a link in textflow that send parameters to a function?

  How to make a link in textflow that send parameters to a function?

  In the examples included with the weekly builds, there is an example of CustomLinkEventHandler.as.  Passing parameters would be in the CustomClickHandler function.  You can set the parameters to the LinkElement that user using the setStyle API styles.

  Hope that helps,

  Richard

• How to make the false colors on gray-scale image? Are there examples of the imaqSetWindowPalette function?

  Hi ~ I'm using LabWindows/CVI & OR vision. I want to apply false colors on my image of gray, but I don't know how to use the imaqSetWindowPalette() function. Are there examples? or a better idea? Thank you very much ~ ~ ~

  It depends on what you're trying to achieve:

  1 imaqSetWindowPalette() change the palette to display only. This affects the display, but still, the underlying image is grayscale.

  a simple use is:

  {

  const int window = 1;

  Image * image;

  / * retrieve and store your image * /.

  ...

  / * change the palette * /.

  imaqSetWindowPalette (window, IMAQ_PALETTE_BINARY, NULL, 0);

  / * display the image * /.

  imaqDisplayImage (image, window, TRUE);

  }

  as specified in the documentation, the third and the fourth parameter of imaqSetWindowPalette() are used only when the pallet type is set to IMAQ_PALETTE_USER, in this case, you specify the colors you want to use for the display.

  {

  / * declare and fill you the palette * /.

  RGBValue palette [256];

  / * fill your palette here * /.

  palette [0]. R = 0;

  palette [0]. G = 0;

  palette [0]. B = 0;

  .alpha palette [0] = 0;

  palette [1]. R = 255;

  palette [1]. G = 0;

  palette [1]. B = 0;

  palette [1] .alpha = 0;

  / * etc * /.

  / * Use the palette * /.

  imaqSetWindowPalette (range of the window, IMAQ_PALETTE_USER, sizeof (palette) / sizeof (* palette));

  }

  fixed palette, you can also set you palette with an initializer:

  RGBValue palette [256] = {{0,0,0,0}, {255,0,0,0}, {0,255,0,0}}; / * you write 256 color values you want your palette consists of * /.

  2. If you want the palette to be final during the recording of the image with the new applied palette, you can specify the palette in the call to imaqWriteFile().

  3. or you can convert your image to RGB (imaqCast()) then... you're on your own: for some unknown reason, the lookup table in a call to imaqCast() converting grayscale 8 bit RGB is not documented as being used. error in documentation? removal of the deliberate feature? Finally, you can test what happens if you specify one.

• How to make a complaint to microsoft on the functionality changes in Windows 8?

  I really want to give Microsoft direct comments about my experience with Windows 8.

  However, I can't really find the contact information for your comments or suggestions.
  Can someone get me some info contact for some Microsoft who maybe care consumers in the way which react to their products?
  Thank you!

  Hi Fraktol,

  Welcome to the community Microsoft and thanks for posting the question.

  If you want to provide specific feedback on the app I suggest you to consult the following Microsoft article.

  How to make an application or a Microsoft exam: http://windows.microsoft.com/en-US/windows-8/how-report-app-review-microsoft

  If you want to give us a feedback for Windows 8 operating system, then you are on a right forum, you can leave your comments here.

  http://answers.Microsoft.com/en-us/Windows

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you

• UI - how to make columns in the selection on a Drop Down list?

  I change a code from Peter Kahrel "start Script UI. I'm trying to make a searchable dropdown list has 4 columns. Research so far and I have positions in research, but I can't seem to make the columns for actual data. I think I need to change the type_ahead as the table is looking at these data. I'm stuck in the water. Can someone tell me what I need to do to get the list is displayed as a column? How can I activate the chosen = type_ahead given in four columns? Code and screenshot below:

  

  picked = type_ahead (["bat", "bear", "beaver", "bee", "cat", "cats_and_dogs",
  "dog", "maggot", "moose", "moth", "mouse"]);
  
  function type_ahead (array)
  {
  var w = new Window ("dialog", "Quick select");
  var entry = w.add ("edittext", [0, 0, 800, 22]);
  entry.active = true;
  
  var list = w.add ("listbox",  [0, 0,800, 500], "",
  {numberOfColumns: 4, showHeaders: true,
  columnTitles: ["Non-Approved Word", "Approved Alternative", "Approved Use", "Non-Approved Use"], columnWidths: [200,200,200,200]});
  
  list.selection = 0;
  
  entry.onChanging = function ()
  {
  var temp = this.text;
  list.removeAll ();
  for (var i = 0; i < array.length; i++)
  if (array[i].toLowerCase().indexOf (temp) == 0)
  list.add ("item", array[i]);
  if (list.items.length > 0)
  list.selection = 0;
  }
  entry.onChange = function () {w.close (1)}
  if (w.show () != 2)
  return list.selection.text;
  else
  
  w.close ();
  }
  

  Yes, you can do as a palette, but you will have to change two things.

  1. target engine. At the beginning of the script, add the following:

  #targetengine "session."

  2. you may not use this code:

  If (w.show ()! = 2)
  Return list.selection.text;
  on the other
  w.Close ();

  Just use w.show (). You then add a control that, when clicked, determine what you want to do. For example, add a "Stop" button and a Manager in this sense:

  stopButton.onClick = function)

  {

  to do this

  Update

  w.Close ();

  }

  Peter

• How to make a preloader external movieclip?

  How to make a preloader external movieclip? Anyone know of a good tutorial because I have tried for the past 12 hours get a preloader to work (not 12 hours right lol). My file is 2.6 MB, so I really need the preloader. Or if there is than any free programs that make preloaders that would be too good. Or all components that have a tutorial with them (also should be free).

  -Thank you

  If your main swf file main.swf in your preloader.fla, you need to create your animation (usually a bar that is filled from left to right) and a textfield, which shows the progress of the load.

  If you create a movieclip (say preloaderMC) in preloader.fla that will contain both and your filling bar instance name fillbar and your textfield instance name tf, on the main timelne of preloader.fla, you can use

  this.createEmptyMovieClip("targetMC",1);

  targetMC.load ("main.swf");

  this.onEnterFrame = function() {}

  var bl:Number=targetMC.getBytesLoaded();

  var bt:Number=targetMC.getBytesTotal();

  {if(BL>0&&BL>=BT)}

  delete this.onEnterFrame;
  }

  preloaderMC.tf.text=Math.round(100*bl/bt) + "% Loaded";

  preloaderMC.fillbar.xScale = 100 * bl/bt;  the left edge of the fillbar should be aligned with its stage-Center

  }

• How to make a screenshot on Satellite?

  How to make a screenshot? I can't find the key on my laptop

  It's a touch of function-Maj

  Press Fn + END, it is at least the keybind for mine

• When I go to get the modules (7.0.1), there is no evidence, except the info bubble "which are the modules. How to make this work?

  When I go to get the modules (7.0.1), there is no evidence, except the info bubble "which are the modules. How to make this work? The rest of the functions in this section seems to work. And I can get MY addons, but not the available modules.

  On the left side, click Extensions.

• When I start typing my ID to connect to the e-mail, the program ended my email address and for the safety of the reasons that I don't want that so how can I turn that function off auto

  When logging in to my gmail account, as soon as I start typing my ID program ends my e-mail address. For security reasons that I want to provide my email address complete and password - I don't want to auto fill or auto insert or anything automatic. How can I disable this function?

  • Click on the (empty) input field on the web page to open the drop-down list
  • Select an entry in the drop-down list
  • Press the DELETE key (on a Mac: shift + delete) to remove it.
  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".
  • http://KB.mozillazine.org/Deleting_autocomplete_entries
  • https://support.Mozilla.com/kb/make-Firefox-remember-usernames-and-passwords

• How to make a manager of UIMessage of PostStep of TestStand in LabWindows/CVI 8.1?

  How to make a manager of UIMessage of PostStep of TestStand in LabWindows/CVI 8.1?

  Hi all

  I have a problem of capture UIMessages motor TestStand for a DLL called from a sequence.
  A search on the forum gave rise to 2 posts on this topic or a similar problem, but with LV and unfortunately, they were not solved.

  TestStand Event 13 - UIMsg_StartInteractiveExecution is not captured by LV operator Interface

  Problems with ActiveX in LabVIEW 7 reminders

  In detail, I want to activate a DLL access the TestStand SequenceContext (variables) in phase of execution of the step.
  A pop-up Panel could then display variables such as the spy does, but more flexible user defined Panel window.

  He is currently working with a periodic timer that causes racing with TestStand conditions while monitoring the variables.
  It works 99%, but I want it to work 100%.

  I found the
   TS_ExecutionAddPostStepCustomUIMessage()
  to indicate to the engine, I want to be informed of one end of the stage with my private UIMessage.
  Next is to implement a callback with
   TS_EngineRegisterUIMessageCallback()
  to retrieve all UIMessages and filter my private.

  Sounds good - works for the capture of events, but TestStand locks and does not continue execution and not to carry out handling
  any operation of the user interface. I have tried 4 solutions (see code), no difference in the result.

  I must kill TestStand to get out of it.

  Attached you will find a stripped down a simple example to reproduce the problem.

  I'd appreciate any help.
  Thanks in advance.

  Kind regards
  Tom

  TestStand 3.5.0
  LabWindows/CVI 8.1.0

  Hello Nick,

  Thank you for your quick response!
  Yes, you are right. That works, I tried today, but...
  isn't this practice as I want it to be. The programmer of a sequence (not me) should take care of the good implementation of a reminder of PostStep to make it work, although he just wants to make a popup. It is not a real problem, but if you use a TestStand MessagePopup command, expected to implement another somewwhere command to make it work. Don't get me wrong, it's just that I don't think that it is a clean solution. And... at least, it is slower.
  I found a tutorial OR a LabView solution for this and two people were asking a LabWindows version. Of course, some are
  interested in this solution. These 2 functions, that I mentioned in my post should work somehow, otherwise they are fools.
  I would really like to know how.

  Thanks again anyway. I'll use your suggestion, if I don't get the problem solved at the root.

  Kind regards
  Tom