How to make a main menu for a game?

Similar Questions

• How to make a free software for my laptop newly formatted? In addition to Windows 8.

  How to make a free software for my laptop newly formatted? In addition to Windows 8. I have an extended warranty at the dealer where I bought my laptop and do not know if the installation of free software is covered. But I want to do it myself if the resources are available.

  You can order Windows 8 update from the following link:

  http://www.windowsupgradeoffer.com/

  The following link will offer you if HP has tested your system for Windows 8:
  http://WWW8.HP.com/us/en/Ad/Windows-8/instructions.html

  If your system is not tested, HP will not release the drivers directly for your site template Web HP.com.

  The following hyperlink will suggest if your system is compatible with Windows 8:
  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  If your system is compatible with Windows 8, most of the pilots would be available through Windows 8. If you need any specific driver, please follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• How to restore the main menu (modify, display, help ect.)? He disappeared

  How to restore the main menu?

  Hello

  Restore it in what?

  in windows Explorer

  Open it and then click on organize then page Setup then menu bar

  in internet explore

  Right-click just below the address bar, and then click menu bar

  or go to tools in the upper right and select menu bar

• Tips on how to make a business case for partitioning

  Hello world
  
  I am the architect of a team of business intelligence/data warehouse. We have grown to the point where I think that we need database partitioning. I believe that we are at approximately 1.5 TB of data. Our larger tables are the counts of 100 million lines with relatively large lengths Records (~ 100 columns). Our just a sort of large tables are of the order of 10 million to 50 million, however, they have very long line lengths (~ 300 columns). Based on the plans of our future source system, our data will become even more granular, and it is always necessary to maintain our historical data.
  
  Those who are not the only reasons, but are some conduct issues that make most of our team members think it's time we purchased database partitioning. Our team is fairly unanimous for partitioning, many of our partners from the source system also deem an 'evidence', however, we get a push back of our CIO saying that 1.5 TB and 100 million records is not only the large amount of data compared to other 'big Data' businesses and that it requires no partitioning.
  
  Anyone has any advice on how to make a business case for the purchase of partitioning? Is there a good way to demonstrate the value of profitability-vs?
  
  Thanks for your comments.
  
  -= Joe

  The best cost c. analysis of benefits is that you put together based on points regardless of the pain you feel.

  For example, you have pain around your evening of meeting load ALS? If you do, you can watch how (and if) partitioning would allow you to streamline your loading process and how much time you would save probably every night. If you have no problem hitting your evening load ALS today, however, this probably isn't something you want to focus on.

  You have pain around query response time? If Yes, you can watch how (and if) partitioning would improve some of the queries and most important reports. Or, perhaps, he would have you to allow users to do an ad hoc analysis more than you can't afford today because the cost would be prohibitive.

  Although you will find no doubt generic cost v. benefit whitepapers, it tends to make a much better case if you focus on what causes the pain of the company and what you as the application developers are willing to commit to. It is easy for a CIO watch a generic white paper saying "partitioning reduces ETL time up to 99%" and the question of what improvements he or she would have actually see and how this is marketing hype. It is much more difficult to look at a document put in place by the data warehouse team saying "partitioning would allow us to reduce the load of X of Y hours on Z hours every night. "That would allow us to hit our SLA w % more often without adding hardware / additional treatment for A project that we have been postpone / let Department B start to work with the data more early every morning / what causes the pain of the IOC. Of course, this means that he must be willing to make such commitments (and, of course, to meet).

  Justin

• How to make multiple "BOLD" text, for example the positions of the scene, or the names of the characters?

  How to make multiple "BOLD" text, for example the positions of the scene, or the names of the characters?

  You can do this by changing the model of the document.

  Open the document, go to Edition-> model. A dialog box will launch that will have some element types on the left and its properties on the right.

  Select Heading (or Character name) stage left. On the right, go to the 'Text' tab and click on the "BOLD" checkbox.

  Press OK.

  I hope this helps.

  See you soon,.

  Sunny

• How do reset you the statistics for a game in Windows 8?

  Game original title statistics

  How do reset you the statistics for Windows8 game?

  I finally found the answer on how to reset game statistics

  Use the menu button

  then click on options

  then click Reset statistics

  then answer Yes

  It works every time, well, at least on apple computer and its operating system

• How to restore the shortcut menu for my XP desktop icons?

  After an attempt to reinstall IE8 (uninstall older versions), the context menu for each icon on the desktop no longer appears as it has already done. The list is totally different. How do I restore the menus?

  To all: this issue is now resolved.

  The culprit was a directory of IE8 has crashed. It seems that under xp, a lot of files and settings are common to IE8 and other applications (Outlook Express, and help & Support print, etc.), they were all affected. Manually, I deleted the directory ie8 (2) duplicate and cleaned the ie8 entries (2) invalid in the registry. Then I downloaded IE8 anew and reinstalled. After the reboot, all my problems have been fixed. The right click menu office was restored, as well as the OE print functions.

  Thanks to all who have offered their help.

• How to make a recovery CD for Windows Vista Home Basic?

  A friend recently gave me a laptop Acer 5315 to play with (I like to play with the old pc...). It came with Win/Vista Basic Home Edition. I got to level with SP2 and 2, kicking the 2gig memory (this is the limit) and now I want to create a backup/recovery disk. It has a CD inside player, but is limited to CD (not DVD). I've been looking around, but apparently creating a Vista recovery disc without the original install disks is not easy. It's true.

  Anyone have any ideas?

  Hello

  Strange that it is limited to the CDs, Vista came on a DVD, unless you have specifically ordered CD from Microsoft if you had a license to retail not OEM...

  Use an external hard drive.

  If you want to make a complete PC Backup or a backup file only, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "AOMEI Backupper Standard for Win7.

  http://www.backup-utility.com/aomei-backupper-for-Windows7.html

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  See you soon.

• How to make a compatible program for Vista?

  Mr President.
  I have the Microsoft Encarta 2006 version that is not compatible for Windows Vista. Please tell me how to make compatible for Vista.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check the Vista compatibility to the above link and see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Read the information below:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=04D26402-3199-48A3-AFA2-2DC0B40A73B6&displaylang=en

  Virtual PC 2007

  Download the full version of Microsoft Virtual PC 2007.

  Buy and install a Windows operating system earlier (XP, Windows 2000) in the above Virtual Machine and try to run your program in that.
  Vista Home Premium is not supported by Microsoft using Virtual PC above, but Virtual PC will work in it.

  See you soon.

  Mick Murphy - Microsoft partner

• How to make a 'left' menu drop?

  Images for the menu, I did and now I want the submenu by the left side of the image when you mouse over. The submenu is quite normal. How to do this using just Dreamweaver (html5, css).

  Use a menu extension commercial:

  PVII Pop Menu Magic 3: the constructor only sensitive Menu for Dreamweaver

• How to make 2 admin pannel for html Web site

  I host my site at asphostportal.com. Now, I want to make 2 admin pannel for website html with connection system...

  1 pannel admin for dashboard view of google analytic...

  and second admin to change subscription contains images, cursors and the details in the Web site...

  Please answer to the complete project of sending

  Thank you

  Your site is hosted on Windows servers.  You will need to use the programming side Server ASPX and a database of MsSQL to create your log-in and the backend admin pages.  Only HTML cannot do what you want.  Programming how much experience do you have?

  Nancy O.

• [Adobe Muse] How to make a horizontal menu with drop down horizontal?

  Hi all

  I would like to make a horizontal menu, but have drop them the low go horizontally rather than the default and the vertical level, like the model I made in photoshop. Can someone help me with this? Thank you!

  

  My recommendation is to watch the following video of Adobe's Terry White, explaining how to make a custom horizontal menu (use the techniques and adapt):

  How to design a Custom Mega Menu in Adobe Muse CC - YouTube

  If you have any questions after watching, will try my best to answer, but feel that his explanation will be much better than any I can give here in writing.

• How to make the Apache configuration for two different areas

  Hello
  
  I was trying just a few clustering on weblogic workshop. I was facing a problem... Here's the scenario:
  
  I have two clusters:
  
  CLUSTER1: 3 managed servers (server1, server2, serveur3)
  Cluster2: 2managed servers (server4, Server5)
  
  I have two examples of applications I have made on these two clusters i.e on cluster1 app1 and app2 on cluster2.
  
  These two applications are deployed all as I am able to open these browser applications by calling the individual run as server port: http://localhost:7003 / app1.
  
  Now, I have installed an apache server on my laptop and configured the http.conf file.
  
  
  Question: I am not able to call the application of apache. If there is only a single cluster then it works very well and for an application two that a single cluster (application) only works too which port is set in the last.
  
  Here are the contents of my httpd.conf file:
  
  #
  # This is the main Apache HTTP server configuration file. It contains the
  configuration directives # that give the server its instructions.
  # See < URL: http://httpd.apache.org/docs/2.2 > for more information.
  # See especially
  # < URL: http://httpd.apache.org/docs/2.2/mod/directives.html >
  # for an analysis of each configuration directive.
  #
  # Do NOT simply read the instructions here without understanding
  # what they do. They are there only as advice or reminders. If you do not know
  # consult the online documentation. You have been warned.
  #
  # Configuration and logfile names: If the file names that you specify for a lot
  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the
  # server uses this explicit path. If the file names do not start
  # with "/", the value of ServerRoot directive is preceded by - so "logs/foo.log.
  # with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2. 2' will be interpreted by the
  # Server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
  #
  # NOTE: Where file names are specified, you must use forward slashes
  # instead of backslashes (e.g. "c:/apache" instead of "c:\apache").
  # If a drive letter is omitted, the drive on which httpd.exe is located
  # will be used by default. It is recommended that you always provide
  # an explicit drive letter in absolute paths to avoid confusion.
  
  #
  # ServerRoot: The top of the directory under which the server tree
  # configuration, error and the log files are kept.
  #
  # Do not add a bar slash at the end of the directory path. If you point
  # ServerRoot to non-local disk, remember to point the LockFile directive
  # to a local disk. If you want to share the same multiple ServerRoot
  demons of # httpd, you will need to change at least the LockFile and PidFile.
  #
  ServerRoot "C:/Program Files/Apache Software Foundation/Apache2. 2. "
  
  #
  # Listen: Allows you to bind Apache to specific IP addresses and/or
  ports #, instead of the default value. See also the < VirtualHost >
  directive #.
  #
  # Change this to listen on specific IP addresses below for
  # prevent Apache glomming on all related IP addresses.
  #
  #Listen 12.34.56.78:80
  Listen 80
  
  #
  # Dynamic Shared Object (DSO) Support
  #
  # To be able to use the features of a module that was built as a DSO you
  # duty place corresponding 'LoadModule' lines at this location until the
  # the directives that it contained are actually available before their use.
  # Modules statically compiled (those listed by "httpd-l") is not necessary
  # to be responsible here.
  #
  # Example:
  # LoadModule foo_module modules/mod_foo.so
  #
  LoadModule modules/mod_actions.so actions_module
  LoadModule alias_module modules/mod_alias.so
  LoadModule modules/mod_asis.so asis_module
  LoadModule auth_basic_module modules/mod_auth_basic.so
  #LoadModule auth_digest_module modules/mod_auth_digest.so
  #LoadModule authn_alias_module modules/mod_authn_alias.so
  #LoadModule authn_anon_module modules/mod_authn_anon.so
  #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  LoadModule modules/mod_authn_default.so authn_default_module
  LoadModule authn_file_module modules/mod_authn_file.so
  #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  LoadModule modules/mod_authz_default.so authz_default_module
  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
  LoadModule modules/mod_authz_host.so authz_host_module
  #LoadModule authz_owner_module modules/mod_authz_owner.so
  LoadModule modules/mod_authz_user.so authz_user_module
  LoadModule autoindex_module modules/mod_autoindex.so
  #LoadModule cache_module modules/mod_cache.so
  #LoadModule cern_meta_module modules/mod_cern_meta.so
  LoadModule modules/mod_cgi.so cgi_module
  #LoadModule charset_lite_module modules/mod_charset_lite.so
  #LoadModule dav_module modules/mod_dav.so
  #LoadModule dav_fs_module modules/mod_dav_fs.so
  #LoadModule dav_lock_module modules/mod_dav_lock.so
  #LoadModule dbd_module modules/mod_dbd.so
  Modules/mod_deflate.so deflate_module #LoadModule
  LoadModule modules/mod_dir.so dir_module
  #LoadModule disk_cache_module modules/mod_disk_cache.so
  #LoadModule dumpio_module modules/mod_dumpio.so
  LoadModule env_module modules/mod_env.so
  #LoadModule modules/mod_expires.so expires_module
  #LoadModule ext_filter_module modules/mod_ext_filter.so
  #LoadModule file_cache_module modules/mod_file_cache.so
  #LoadModule filter_module modules/mod_filter.so
  #LoadModule modules/mod_headers.so headers_module
  #LoadModule ident_module modules/mod_ident.so
  #LoadModule imagemap_module modules/mod_imagemap.so
  LoadModule modules/mod_include.so include_module
  #LoadModule info_module modules/mod_info.so
  LoadModule modules/mod_isapi.so isapi_module
  #LoadModule ldap_module modules/mod_ldap.so
  #LoadModule logio_module modules/mod_logio.so
  LoadModule log_config_module modules/mod_log_config.so
  #LoadModule log_forensic_module modules/mod_log_forensic.so
  #LoadModule mem_cache_module modules/mod_mem_cache.so
  LoadModule mime_module modules/mod_mime.so
  #LoadModule mime_magic_module modules/mod_mime_magic.so
  LoadModule negotiation_module modules/mod_negotiation.so
  #LoadModule modules/mod_proxy.so proxy_module
  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
  Modules/mod_proxy_http.so proxy_http_module #LoadModule
  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  #LoadModule reqtimeout_module modules/mod_reqtimeout.so
  #LoadModule rewrite_module modules/mod_rewrite.so
  LoadModule setenvif_module modules/mod_setenvif.so
  Modules/mod_speling.so speling_module #LoadModule
  Modules/mod_ssl.so ssl_module #LoadModule
  #LoadModule modules/mod_status.so status_module
  #LoadModule substitute_module modules/mod_substitute.so
  #LoadModule unique_id_module modules/mod_unique_id.so
  #LoadModule userdir_module modules/mod_userdir.so
  #LoadModule usertrack_module modules/mod_usertrack.so
  #LoadModule version_module modules/mod_version.so
  #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  LoadModule modules/mod_wl.so weblogic_module
  
  
  
  * < IfModule mod_weblogic.c > *.
  WebLogicCluster 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7003, 127.0.0.1:7103, 127.0.0.1:7104
  MatchExpression /app1
  * < / IfModule > *.
  * < location /weblogic > *.
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  PathTrim /weblogic
  * < / location >. *
  
  * < IfModule mod_weblogic.c > *.
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  MatchExpression /app2
  * < / IfModule > *.
  * < location /weblogic > *.
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  PathTrim /weblogic
  * < / location >. *
  
  
  < IfModule! mpm_netware_module >
  < IfModule! mpm_winnt_module >
  #
  # If you want httpd to run as a different user or group, you must run
  # httpd as root initially and it will pass.
  #
  # Group / user: the name (or #number) of the user/group to run httpd as.
  # It is generally advisable to create a dedicated and aggregatable for user
  # httpd, as with most system services are running.
  #
  Demon of the user
  Daemon group
  
  < / IfModule >
  < / IfModule >
  
  Server configuration # 'hand '.
  #
  # The directives in this section implement the values used by the 'hand '.
  # Server, which meets all demands that are not managed by a
  definition of # < VirtualHost >. These values also provide defaults for
  # all < VirtualHost > containers you can set later in the file.
  #
  # All these directives may appear inside containers < VirtualHost >,.
  # in which case the value default parameters will be substituted for the
  virtual host of # being defined.
  #
  
  #
  # ServerAdmin: Your address, where problems with the server should be
  # e-mail. This address appears on some generated by the page server, such
  # as error documents. for example [email protected]
  #
  ServerAdmin < adminurl >
  #
  # ServerName gives the name and the port used by the server to identify itself.
  # This can often be determined automatically, but we recommend that you specify
  # explicitly to avoid problems during startup.
  #
  # If your host doesn't have a registered DNS name, enter its IP address here.
  #
  #ServerName < servername >
  # DocumentRoot: The directory you are going to use your
  documents #. By default, all requests are taken from this directory, but
  aliases and symlinks # can be used to point to other locations.
  #
  DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs".
  
  #
  # Each directory that Apache has access can be configured in respect
  # to which services and features are allowed and/or disabled in this
  # Directory (and its subdirectories).
  #
  # Everything first, we configure the 'default' to be a very restrictive of game
  features #.
  #
  < directory / >
  Options FollowSymLinks
  AllowOverride None
  Order deny, allow
  Refuse to all the
  < / Book >
  
  #
  # Note that, from this point forward you must precisely enable
  features special # to be enabled - so if something doesn't work not as
  # you might expect, make sure that you have specifically enabled it
  # below.
  #
  
  #
  # This should be replaced by what you set DocumentRoot.
  #
  < directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs" >
  #
  # Possible values for the Options directive are "None", "All."
  # or any combination of:
  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  #
  # Note that "MultiViews" must be named explicitly -'all Options '.
  # is not give it to you.
  #
  # The Options directive is complex and important. Please see
  # http://httpd.apache.org/docs/2.2/mod/core.html#options
  # For more information.
  #
  Options Indexes FollowSymLinks
  
  #
  # AllowOverride controls what directives may be placed in .htaccess files.
  # It can be 'All', 'None', or any combination of key words:
  # Options FileInfo AuthConfig Limit
  #
  AllowOverride None
  
  #
  # Controls who can get stuff from this server.
  #
  Order allow, deny
  Allow all the
  
  < / Book >
  
  #
  # DirectoryIndex: sets the file Apache will serve if a directory
  # is requested.
  #
  < IfModule dir_module >
  DirectoryIndex index.html
  < / IfModule >
  
  #
  # The following lines prevent the .htaccess and .htpasswd files to be
  # seen by customers of the Web.
  #
  < FilesMatch "^ \.ht" > "".
  Order allow, deny
  Refuse to all the
  Meet all
  < / FilesMatch >
  
  #
  # ErrorLog: The location of the error log file.
  # If you do not specify an ErrorLog directive in a < VirtualHost >
  # container, error messages related to this virtual host will be
  # logged here. If you do define a for a < VirtualHost > error log
  container of #, that host errors will be logged there and not here.
  #
  ErrorLog logs / 'error.log '.
  
  #
  # LogLevel: Control the number of messages in the error_log.
  # Possible values include: debug, info, notice, warn, error, crit,.
  # emerg, alert.
  #
  LogLevel warn
  
  < IfModule log_config_module >
  #
  # The following directives define some nicknames format for use with
  # a directive CustomLog (see below).
  #
  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune
  
  < IfModule logio_module >
  # You must enable mod_logio.c use %I and frequency
  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio
  < / IfModule >
  
  #
  # The location and format of the access (Common Log Format) log file.
  # If you do not have any logfiles access set in a < VirtualHost >
  container of #, they will be saved here. On the other hand, if you the do
  # define per - < VirtualHost > access logfiles, transactions will be
  # logged there and not in this file.
  #
  Common CustomLog "logs/access.log.
  
  #
  # If you prefer a log file of access, agent, and referer information
  # (Combined logfile format) you can use the following directive.
  #
  #CustomLog "logs/access.log' combined
  < / IfModule >
  
  < IfModule alias_module >
  #
  # Redirect: Allows to tell clients the documents used for
  # exist in your server's namespace, but no more. The customer
  # make a new request for the document at its new location.
  # Example:
  # Redirect permanent/foo http:// < url >/bar
  
  #
  # Alias: Maps web paths into paths of file system and is used to
  # access content that don't live under the DocumentRoot directive.
  # Example:
  # Alias /webpath/full/filesystem/path
  #
  # If you include a trailing / on /webpath, then the server will be
  # require that he be present in the URL. It is also likely that
  # duty provide a < Directory > section to allow access to
  # the path to the file system.
  
  #
  # ScriptAlias: This controls which directories contain server scripts.
  # ScriptAliases are essentially the same as assumed names, except that
  # documents in the target directory are treated as applications and
  # executed by the server on demand, rather than as documents sent to the
  client of #. The same regulation on flight "/" applies to the ScriptAlias
  # as for the Alias directives.
  #
  ScriptAlias/cgi-bin / "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/".
  
  < / IfModule >
  
  < IfModule cgid_module >
  #
  # ScriptSock: On threaded servers, refers to the access path to the UNIX
  decision # used to communicate with the CGI mod_cgid daemon.
  #
  Newspapers/cgisock #Scriptsock
  < / IfModule >
  
  #
  # "C:/Program Files / Apache Software Foundation/Apache2.2/cgi-bin" should be replaced by everything that your ScriptAlias
  # CGI directory exists, if you have set up.
  #
  < directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" >
  AllowOverride None
  None of the options
  Order allow, deny
  Allow all the
  < / Book >
  
  #
  # DefaultType: Server default MIME type used for a document
  # If it cannot establish also as file name extensions.
  # If your server contains mainly text or HTML documents, it is "text/plain".
  # a good value. If your content is binary, such as applications
  # or images, you can use "application/octet-stream" instead of
  # Keep browsers try to view binary files, as if they were
  # text.
  #
  DefaultType text/plain
  
  < IfModule mime_module >
  #
  # TypesConfig points to the file containing the list of mappings from
  # MIME file extension - type.
  #
  TypesConfig conf/mime.types
  
  #
  # AddType allows you to add or replace the MIME configuration
  # the file specified in TypesConfig for specific file types.
  #
  #AddType application/x-gzip .tgz
  #
  # AddEncoding allows you to have certain browsers uncompress
  # information on the fly. Note: Not all browsers support this.
  #
  #AddEncoding x-compress. Z
  #AddEncoding x-gzip .gz .tgz
  #
  # If the AddEncoding directives above are commented out, then you
  # should probably define these extensions to indicate media types:
  #
  AddType application/x-compress. Z
  AddType application/x-gzip .gz .tgz
  
  #
  # AddHandler allows you to map certain "manipulators": file extensions
  # No actions associated with the file type. It can be either integrated into the server
  # or added to the directive of the Action (see below)
  #
  # To use CGI outside of ScriptAlias directories scripts:
  # (You will also need to add "ExecCGI" to the "Options" directive.)
  #
  #AddHandler cgi-script .cgi
  
  # For maps of type (negotiated resources):
  #AddHandler type-plan of the var
  
  #
  # Filters allow you to process content before sending it to the client.
  #
  # To parse .shtml for server-side includes (SSI) files:
  # (You will also need to add "Includes" the "Options" directive.)
  #
  #AddType text/html .shtml
  #AddOutputFilter INCLUDES .shtml
  < / IfModule >
  
  #
  # The mod_mime_magic module allows the server to use various boards of the
  content of the file itself to determine its type. The MIMEMagicFile
  # directive tells the module where the definitions of suspicion.
  #
  #MIMEMagicFile conf/magic
  
  #
  # Customizable error responses come in three flavors:
  ((# 1) text 2) local redirects 3) external redirects
  #
  # Examples:
  #Error Document 500 "The server made a boo boo".
  #Error Document 404 Missing.html
  #Error Document 404 "/cgi-bin/missing_handler.pl"
  #Error Document 402 subscription_info.html < url >
  #
  
  #
  # EnableMMAP and EnableSendfile: on systems that support.
  projection in memory # or the sendfile syscall is used to deliver
  # files. Usually, this improves the performance of the server, but must
  # turn off when mounted network is served
  # file systems or if support for these functions is also
  # broken on your system.
  #
  #EnableMMAP off
  #EnableSendfile off
  
  # Additional configuration
  #
  # The configuration files in the conf/extra/directory can be
  # included to add additional features or change the default configuration
  # the server, or you can simply copy their content here and change as
  # necessary.
  
  # Server-pool management (MPM specific)
  #Include conf/extra/httpd-mpm.conf
  
  # Multilingual error messages
  #Include conf/extra/httpd-multilang-errordoc.conf
  
  # Entries to the fancy directory
  #Include conf/extra/httpd-autoindex.conf
  
  # Language settings
  #Include conf/extra/httpd-languages.conf
  
  # User directories
  #Include conf/extra/httpd-userdir.conf
  
  # Info in real time on the applications and configuration
  #Include conf/extra/httpd-info.conf
  
  # Virtual hosts
  #Include conf/extra/httpd-vhosts.conf
  
  # Local access to the manual for the Apache HTTP Server
  #Include conf/extra/httpd-manual.conf
  
  # Distributed authoring and versioning (WebDAV)
  #Include conf/extra/httpd-dav.conf
  
  # Various default settings
  #Include conf/extra/httpd-default.conf
  
  # Secure connections (SSL/TLS)
  #Include conf/extra/httpd-ssl.conf
  #
  # Note: The following text should be present to support
  # start without SSL on platforms without equivalent/dev/random
  but # a statically compiled in mod_ssl.
  #
  < IfModule ssl_module >
  SSLRandomSeed startup builtin
  SSLRandomSeed connect builtin
  < / IfModule >
  
  This is so for the app2 only configuration above, I am able to call and app1 his adage "404 page not found".
  
  Can soomebody help me cofiguring apache so that I can call the two applications.
  
  
  Thank you
  Ankit

  >
  
  WebLogicCluster 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7003, 127.0.0.1:7103, 127.0.0.1:7104
  MatchExpression /app1
  
  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  PathTrim /weblogic
  

  
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  MatchExpression /app2
  
  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  PathTrim /weblogic
  
  >

  This configuration is a little weird. He has /app1 MatchExpression and MatchExpression /app2 and at the same time two sections . Are you sure you understand what means that the configuration?

  Try something like this...

  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  

  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  

  where /app1 and /app2 are your weblogic applications contexts.

  http://download.Oracle.com/docs/CD/E11035_01/WLS100/plugins/Apache.html
  http://httpd.Apache.org/docs/2.0/mod/core.html#location

• How to make a dialog box for a user to choose a file to disk

  Hello

  Is it possible to make a dialog box for a user of photoshop, choose a txt, process of my javascript file?

  I have a txt file with all the names and locations of the psd files, I want to treat by photoshop. I have e.g. 100 out of a folder with 250 images.

  If anyone has a shot "sample code" how to select a file - I will be happy.

  / T

  Here is an example of selection of a text file...

  var dlg=
  "dialog{text:'Script Interface',bounds:[100,100,500,220],"+
  "testFile:EditText{bounds:[10,40,310,60] , text:'' ,properties:{multiline:false,noecho:false,readonly:false}},"+
  "Browse:Button{bounds:[320,40,390,61] , text:'<<' },"+
  "statictext0:StaticText{bounds:[10,10,240,27] , text:'Please select Text File' ,properties:{scrolling:undefined,multiline:undefined}},"+
  "Process:Button{bounds:[10,80,190,101] , text:'Process' },"+
  "button2:Button{bounds:[210,80,390,101] , text:'Cancel' }};"
  var win = new Window(dlg,'test');
  win.center();
  win.testFile.enabled=false;
  win.Browse.onClick = function() {
   selectedFile = File.openDialog("Please select TEXT file.","TEXT File:*.txt");
    if(selectedFile != null) win.testFile.text =  decodeURI(selectedFile.fsName);
  }
  win.Process.onClick = function() {
   if(win.testFile.text == '') {
    alert("No text file has been selected!");
    return;
    }
   win.close(1);
   selectedFile.execute();
  }
  win.show();
  

• How to make videos without interruption for which wach?

  Hi all

  I take a small problem and did not find research F1, manuals and in google, but I guess this question is a little easier, maybe so much as I cannot find an answer.

  My question is simple: how to make videos in captivity nonstop adobe who wach? I made some videos, but I don't really know why sometimes I need press the play button again and this causes me problems, especially because sometimes is a lot of times.

  I just strange why sometimes I need to press play again each slide, and sometimes need press more than once in the same drag the play button to continue the Adobe animation in captivity.

  Thanks for any help

  Hi again

  If you have buttons or click on the boxes, you will need to modify them to remove the break. Otherwise they take a break.

  I'm still a bit ambiguous on the desires of the button. I'm sorry.

  I will meditate on it and see if it will make sense in a little... Rick

  Click here for authorized Adobe Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks