How to make a PeopleSoft user, an administrator.

Similar Questions

• How to make in my user profile? Said the profile cannot be loaded

  HOW TO MAKE IN MY USER PROFILE? WHENEVER I HAVE TO CHECK ON MY PROFILE IT ME GIVES A MESSAGE THAT THE PROFILE CANNOT BE LOADED. IT IS ALSO THE ADMINISTRATOR ACCOUNT.

  Hello

  Please do not post in all capitals

  It makes it very difficult to read

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• How to make an admin user in Windows 8

  Hello

  I bought a laptop Windows 8 for my laws in. Since they are not only proficient in computer science, I initially created the laptop with my hotmail id.
  Then, I created user for them with their electronic identity card profiles.
  It seems that my username is admin by default on the laptop. What ever they do, asking her my password.
  It seems so stupid to me.

  How can I make their profiles admin I would also delete my profile from the laptop.
  Windows 7 allows me to do that.
  Please advice.

  It's the same way that you did in Windows 7. Control Panel > user accounts. Here you can remove and promote accountable. You'll have to do it from your account initially since you must be an administrator to account for evolution.

• How to make all the user accoount cannot install the program in Windows XP Home Edition. ?

  I want to do any user account cannot install program, just as it is in an administrator-level... Is it possible if I use Win XP Home. ? cause I can see, all of them say, it is possible if I use XP Prof

  If possible, I want to make a control panel cela a regedit or a BIOS... I don't want to use some software except it's freeware...

  Thanx

  You can use Windows Steady State, but he was supposed to have been removed from the MS Download Center by December 31, 2010, because Support for it will end June 30, 2011.
  All that being said, it is always available on the Download Center and it's free – Windows SteadyState 2.5

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• How can I change Standard user to administrator?

  user title: original Standard to the administrator

  I've recently updated my laptop Compaq 32-bit of Windows Vista to Windows 7 Ultimate.  During this conversion process, both user configured as an administrator reset to standard user accounts.  Now, I don't have anyway to keep my computer.  The system won't let me change.  How can I reset the administrator user accounts?  Or, how you're going to help me change the setting?

  Let's look more closely your accounts. Please try this:
  1. click on start, then type the three letters cmd into the search box and press ENTER.
  2. type the following command:
  net localgroup administrators > '% UserProfile%\desktop\Admins.txt' {Enter}
  3. Paste the contents of the Office "Admins.txt" file in your reply.

• How to make the software application to any user

  Hello, using Win XP.  I have a software that is available when I am connected on the PC, but I want to make it accessible to any user who is connected.  How would I do that?

  Hi JHL1951,

  You can assign permissions to another user account to access these files or folders.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP

  http://support.Microsoft.com/kb/307874

   

  How to make files and folders private in Windows XP so that only you have access to these

  http://support.Microsoft.com/kb/930987

  Let us know if that helps.

• How to make the updates of operating system for the limited user account?

  original title: how to make the updates of operating system for the limited user account?  Limited user account cannot access the Windows Update page, see instead cautioned against MS the most recent must be installed.

  XP Pro SP3 slipstreamed.  New a DBAN nuked HDD installation

  All the OS updates installed from Admin acct before creating the LUA

  AV installed AVAST

  all dot net uninstalled and then reinstalled to resolve a problem installing Quicken

  Updates to auto lit

  Active Windows Firewall

  Three solutions of workaround for Windows XP running as a limited user

  http://blogs.Computerworld.com/16502/three_workarounds_for_running_windows_xp_as_a_limited_user

  Survive a Windows XP Limited user account

  http://techknack.NET/surviving-a-Windows-XP-limited-user-account/

  See the response from Michael Kuntz - re: HAL files

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/e8612ac4-b881-4FB3-85e7-32004932fb5f

  There is an available for installation of SP3 Cd

  Manually installing SP3 using the Microsoft Download Center or a CD

  If you have problems to receive the service pack from Windows Update, you can download SP3 as a standalone package from the Microsoft Download Center Web site, and then install SP3 manually. The installation package is intended for it professionals and developers, but you can always download and install this file.

  You can also order a CD from Microsoft containing SP3. For more information, go to the Microsoft site.

  To manually install SP3 using the standalone package installation or CD

  1. Do one of the following:

     • If you downloaded SP3 from the Web site, to install it immediately, click Open or run and follow the instructions on the screen. To install the program later, click on save and download the file to install it on your computer. When you are ready to install the service pack, double-click the file.

     • If you install SP3 from the Service Pack 3 CD, insert the disc into your computer with your current version of Windows XP running, and Software Update Installation Wizard should appear automatically. If this wizard does not appear, click Start, double-click my computer, click on your CD or DVD drive and then click AutoPlay.

  2. In Windows XP Service Pack 3 page, click Next.

  3. Follow the instructions that appear on your screen.

  4. Once the installation is complete, click Finish to restart your computer.

  5. If you disabled your antivirus software, turn it back on.

• How can I prevent standard users access records personnel administrator for example. photos and documents

  How can I prevent standard users access records personnel administrator for example. photos and documents

  Hello bh51,

  Did you run your antivirus as well as any spyware removal?  As davidhk requested, then you are able to turn sharing off the coast, but it just doesn't work?   I suggest creating a new folder and move the data, and then see if other users are still able to view these.

  Please let us know status.

• I got 3 accounts, two were administrator accounts and a regular user account. Now, I find that both my administrator accounts have become odinary leaving me without any user accounts administrator account. How can I now get an administrator account?

  I don't remember doing anything that could have caused this problem.

  Enable the built-in Administrator account log in, make your changes to user accounts, search for malware to be proactive.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  First try a system restore to when things worked. If this fixes things, very well. If this is not the case, try to start in Safe Mode, because the normally disabled built-in Administrator account can be activated if no other administrative user is available on the system. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the diagnostic menu where you can use your arrow key to select Mode without failure. If the built-in administrator is enabled, you will see an icon for it on the Welcome screen.

  If the above does not work:

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  Remove the installation DVD and reboot the system in normal Mode. You will see an icon for the administrator on the Welcome screen. If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows Vista (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode. If this isn't the case, you can do a repair file Vista bootable DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need the third burning like Nero, Roxio or freeImgBurn software to burn the image .iso image file, not in the form of data.

  After net user, remove the bootable CD and restart the computer. You will now see an icon for administrator on the Welcome screen. Connect to this account. After getting things sorted, disable the administrator built-in yet for security reasons * after * creation of a user and administrative per the recommendations below.

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  MS - MVP - Elephant Boy computers - don't panic!

• How can I copy the user created in the administrator account?

  Hello

  I would like to ask what can I do? When I installed Vista Home Premium on my computer, I created another user account! I have configured my PC how I like it! With all the parameters that I need (research, programs, etc...) I don't want 2 user account, but I can't remove the administrator one! (Now, it's empty, nothing about this)

  So, how can I copy all my settings, remove the user and a user account?

  I hope I was understandable! :)

  Good day!

  Hi Muzsika,

  I don't know what you mean, so I'll just say what I think is your problem, and then respond.

  Problem: I have a standard account I have all my files in and have customized this account. I have an administrator account that I don't use. Because I can't remove the administrator account, I would copy the standard account for the administrator account and remove the standard account.

  The answer is: change the standard account to an administrator. account, and then delete the other admin account.
  How to change an account type to administrator: (necessarily using the account admin.)

  1. Open a user account by clicking on the button start , clicking Control Panel, clicking user accounts and family safety, click user accounts, and then clicking on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Click on the standard account and then click on change the account type.

  3. Select the type of account you want, and then click on change the account Type.

• How to find out who is the administrator account on my laptop if there are three users

  My son and daughter created the user account on my laptop how I tell me who is the administrator user and change in me. now, I can not even run or install your antivirus to protect my laptop because it asks me to the administrator. any suggestions?   either by the way, I have version XP of Windows 7... the gardener in version in the forum section has no XP version of windows 7.

  My son and daughter created the user account on my laptop how I tell me who is the administrator user and change in me. now, I can not even run or install your antivirus to protect my laptop because it asks me to the administrator. any suggestions?   Incidentally, I have version XP of Windows 7... the gardener in version in the forum section has no XP version of windows 7.

  What does that mean? There is a Windows 7 or Windows XP, but not the version XP of Windows 7. Or do you mean "Windows XP Mode", which has been installed on a full Windows 7 Edition-Professional host? I'm a bit confused.

  Next the administrator account number-> may request to your son or doughter - they know what account is a member of the admin group (and they also know the password for this account).

• How do I change user to administrator to the standard user account?

  * Original title: account uac

  How do I change user to administrator to the standard user account?

  To change an access level of account (Administrator user Standard, or vice versa) see - http://windows.microsoft.com/en-us/windows/change-users-account-type#1TC=windows-7

  For more information if necessary, see- https://TechNet.Microsoft.com/en-us/library/cc709691%28V=WS.10%29.aspx

  Note: You need at least one administrator account, do not attempt to remove the last of them.

• How to create a user local administrator with the user root on the CV

  As says the tile, how to create a user local administrator with the user root on VCS-Express. I lost the password and cannot log in as an admin user, but I can't seem to log as long as user root.

  Once connect you with the root account, type in "tsh", from there, you can create the accounts of local administrators with 'xCommand AdminAccountAdd.  See the reference section of command of the VCS Administrator's Guide, starting on pg 517.

  If your VCS is a virtual machine, you can change the password of admin with vSphere, or if it is a hardware appliance, you can use the serial port, see pg 312 of the Administrator's guide.

• How to make a user able to connect only once? and how do I restrict a user authorized to vote only 15 candidates and the brand of vote count?

  Hello

  I'm just doing my project which is the voting system. So my first question is how to make a user or a voter can connect once only using their username and password? After that they brought their vote, they can not be able to connect to a vote. Here, the user name, I replace it with IC and the password I can replace the ID (student ID). Here is my code for the connection:

  <?php
  if(isset($_POST["submit"])){
  $user=$_POST['IC'];
  $pass=$_POST['ID'];
  
  
  $con=mysql_connect('localhost','root','pass') or die(mysql_error());
  mysql_select_db('ses') or die("Cannot select DataBase");
  
  
  $query=mysql_query("SELECT * FROM voters WHERE IC='".$user."' AND ID='".$pass."'" );
  $numrows=mysql_num_rows($query);
  if($numrows!=0)
  {
  while($row=mysql_fetch_assoc($query))
  {
  $dbusername=$row['IC'];
  $dbpassword=$row['ID'];
  
  
  }
  
  
  if($user == $dbusername && $pass == $dbpassword )
  {
  session_start();
  $_SESSION['sess_user']=$user;
  $_SESSION['sess_pass']=$pass;
  
  
  
  
  /*Redirect browser*/
  header("Location: main.php");
  }
  }else{
  echo "Invalid IC Number and ID Number!";
  }
  }
  ?>
  
  

  for the second question is how to limit a voter to vote only 15 candidates and counting of the vote that voters go? When the vote is made with 15, then the popup script appears informed that the elector make themselves with their vote.for this I use box as a method of voting and each checkbox have the id which is the primary key. I appoint the id as 'No' and set it as the primary key. Here is the code for voting:

  <?php
  $servername = "localhost";
  $username = "root";
  $password = "pass";
  $dbname = "ses";
  
  
  // Create connection
  $conn = new mysqli($servername, $username, $password, $dbname);
  // Check connection
  if ($conn->connect_error) {
       die("Connection failed: " . $conn->connect_error);
  }
      
  $sql = "SELECT No, Calon, ID, Jurusan, Image FROM candidates";
  $result = $conn->query($sql);
  
  if(isset($_POST['vote'])) {
      
  //get the ID value from the radio button form field and store in an array.
  $update_vote = $_POST['candidate_id'];
  
  //loop through the array and update the database
  foreach ($update_vote as $value) {
  $vote_sachin = "UPDATE candidates SET Undi=Undi+1 WHERE No=".$value."";
  $run_sachin = mysqli_query($conn, $vote_sachin);
  
  
      }
  
    header("Location:http://localhost/VotingSystem/");
  }
  
  
  ?>
  
  
  <form method="post" id="form1" action="main.php">
  <?php
  if ($result->num_rows > 0) {
  echo "<table border >
  
  
  <tr>
  <th>NO</th>
  <th>Candidate</th>
  <th>INFO</th>
  <th>Vote</th>
  </tr>";
  // output data of each row
  while($row = $result->fetch_assoc()) {
  echo "<tr>
  <td align='center'>" . $row["No"]. "</td>
  <td><img src=" . $row['Image'] . " width=120px height=150px></td>
  <td><br/>" . $row["Calon"]. " <br/>" . $row["ID"]. " <br/>" . $row["Jurusan"]. "<br/></td>
  <td align='center'><input type='checkbox' name='candidate_id[]' value='".$row['No']."'></td>
  </tr>";
  }
      echo "<tr><td></td><td></td><td></td>
      <td><input type='submit' name='vote' value='VOTE'</td>
      </tr>";
  echo "</table>";
  
  
  } else {
  echo "0 results";
  }
  $conn->close();
  
  
  ?>
  
  

  I hope someone can help me with this because I'm still trying to learn this by my own php code...

  Thank you

  # 1, add a Boolean column in the table (VoteSubmitted) and the value initially FALSE to follow if the user has already voted.  Check this field when they connect. If the field is set to TRUE, displays a message and cannot vote again. When they get it vote, update the field from FALSE to TRUE.

  # 2, I would like to do this with javascript to allow them to select all their candidates and submit once. You could start with something like this:

  Cut paste & limit the number of boxes checked script

• How to make a web page which changes each time the user refreshes? Is it possible to Muse?

  Hi, I would like to make a simple site where the main text in the center of the page changes whenever the user refreshes the page in their browser. I guess I'll have to do a master and several pages that are all the same except for changes in the text, but I don't know how to make sure each update goes to another page and not just the home page? Is it still possible in the Muse?

  This is an example of what I'm going: : procatinator:

  Thank you!

  You can't do it with only Muse. Would be probably pretty simple to do with a bit of Javascript. Check the widget directory such that it is possible that someone has made a widget for random content. If not, maybe I'll do one this weekend. ;-)