How to make a (simple) video editing software flash

Similar Questions

• How to make a simple video with my computer ' s web cam?

  I recently (10 minutes ago) asked a simple question on how to make a video.  For five of the most wonderful years of my life, I have designed critical systems of path for launch Pads 39A & B, the vehicle Assembly building and the robot that went out the candle to the pad.  On paper, a critical path system explained how the engineer, design and build a structure.  In this case, it was activities separate from about 3400 and when, how and how long these activities were to each other.  At the time where the Commander.  I worked and which had been granted to these contracts, had developed the method of the path critical following the guidance system of the Polaris Missile, which was incredibly hard to get a handle.  At the time where manned Apollo lunar Mission has been in place, I was one of only ten people in the world, who knew the process.  We needed honest, some answers to our questions or it would take years to accomplish what Stephen Hawking characterized as "the unique accomplishment largest in human history" you gave me answers to my questions by these 'engineers' for Microsoft on the use of a webcam and had implemented them, would not be there was a second launch of Apollo because the first three astronauts would be dead.  How to make a simple video with my computer ' s web cam?     Al wood

  http://www.WikiHow.com/use-webcam-on-Windows-Movie-Maker

  Movie Maker: http://windows.microsoft.com/en-us/windows-live/movie-maker

  Not tested.  Instructions could be for the old version of Movie Maker, but they probably give you the basics.

  (It's a way of many - that the answer does not depend on your OS, but on the software you use to interface with your webcam.  Camtasia?  Skype?  etc and so on...)

  In addition, to find this information is quite simple.  Once I decided on what software to go with in my response to you (I chose Windows Movie Maker 12 because it's easy to get, free, Microsoft, similar to products that were previously found with Windows) I did a simple search on Google:

  use Windows Movie Maker 12 with webcam

  https://www.Google.com/#q=Use+Windows+Movie+Maker+12+with+webcam

  or more demonstratively:

  http://lmgtfy.com/?q=Use+Windows+Movie+Maker+12+with+webcam

  The first hit seems to be a video market even helps you to download and install the Windows Movie Maker 12 application...

• Y at - it a video editing software that I could use.

  I was asked to edit a video together.  I have Windows 7 and Office 2010.  Is there a simple video editing software in there?

  I have add more details to your previous thread if you want to further diagnose your problem with Movie Maker.

  As for your current question on AVS4YOU, my guess would be that the VPS is a project file that is unique to this program.  In other words, the person who would continue to edit your project should have the same editing program, the project file and all the source files in the same places on their PC.

  All video editing software are probably very similar in this regard.  For example, in Movie Maker, when you add items to your project, add transitions, etc. that they will appear in your project file.  In the case of Movie Maker, it's a .wlmp file.  A project file contains no actual video, photos or music, just the current state of your project.  It will contain a list of all your source files (the folder and the name of the relevant media file) and the details on the changes, transitions, effects, titles, legends added, etc.  But this isn't a file that can be understood by other video editing programs.

  To share the results of your changes, you must save the film resulting in a video file.  There are many formats of your choice.  For example, the latest version of Movie Maker can record in MP4 or WMV format.  That can be used in other programs.  AVS4YOU lists a number of formats too.

  However, which would result in a single video file with all your changes incorporated.  He would split points, individual videos/pictures, transitions, etc.  So basically, once you start editing in a video editor, you can't transfer this session to another video editor except as a completed film.

  There are exceptions, for example Adobe makes it so their other products include Photoshop files and Illustrator, or part of a project of creation may be related to an After Effects project.  Another example is that a Movie Maker project can be imported into Nero video 2014 for further processing. But it must be designed for and is not common during the passage to other video editing software.

• How to make a music video .vob to work in movie maker? __

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  How to make a music video .vob to work in movie maker? __

  ========================================
  First you try to rename the .vob to .mpg or .avi file and try
  to import... If Movie Maker accepts the file, drag it on the timeline
  and publish (save) in .wmv format in a folder on your hard drive
  drive. Then re-import the .wmv file and you are ready to change.

  In addition, you will need software to convert the .vob file to the
  .wmv format. The following freeware can be worth a try:

  SUPER
  Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster)

  (FWIW... it is always a good practice to create one)
  System restore point before installing new software)

  After installing the program GREAT... open...
  you will see two small circles at the top left
  corner of the screen... check the UPPER circle.

  Now... Drag/Drop your. VOB file in the current field.

  Output container... Choose wmv...

  Video scale size / no change

  Left, click the Encode button.

  Choice: A Simple Profile / OK...

  Wait... wait longer...

  (FWIW... I have better luck with video if I'm not
  try to multi-task while a file is being converted)

  When the file is converted, you should find it in...
  Program Files / eRightSoft / Super / exit.

  Or... you can type... CTRL + O.. o open the Save
  Window and choose a backup folder.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to make a simple slideshow DVD of a group of .jpg images?  No music, no fancy transition. iDVD > magic DVD comes close, but the quality is poor and I want the images in a specific order.  I also have iLIFE ' 09, which includes iPHOTO

  How to make a simple slideshow DVD of a group of .jpg images?  No music, no fancy transition. iDVD > magic DVD comes close, but the quality is poor and I want the images in a specific order.  I also have iLIFE ' 09, which includes iPHOTO

  1. put the image files you want in the slide show in an album and genre as you want. Follow the Apple document to prepare images for iDVD: iDVD ' 09 (7.x): preparing images for iDVD slideshows

  2 - Launch iDVD and select an older theme, not animated.  You can change the background of the theme by dragging the image file of your choice, black or other, in the display pane for the menu.

  3 - Click on the button '+' and add a slideshow from the menu.

  

  4. double click on the sideshow button to enter the mode of construction of the slide show.

  5. in the media pane click the Photos button.

  6 - click on iPhoto and find the album you created with selected images.

  

  7. Select all images in the album and drag to the left in the slide show window.

  8 - Select the transition for the slideshow and the time for each slide on screen

  9 - follow this workflow to help ensure the best DVD video qualty:

  Once the project you want it save it as an image disk via the menu file → save as Disk Image . It will separate from the process of encoding of the burning process.

  To check coding mount the disk image, launch a DVD player and read it.  If it plays OK with DVD, encoding is good.

  Burn burn to disc with utility disk or toasts to the slowest speed (2 x - 4 x) in order to ensure the best quality.  Always use higher quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are recommended in these forums.

  

• good video editing software?

  Hey anyone know of any good video editing software which can change 3gp or avi, I got a few videos that makes very dark, I want to clarify that someone know all good programs that no matter what codec the program works with I can always convert the video

  If you convert the clips to the. WMV format, you might
  use Movie Maker for editing.

  Also...

  The freeware iWisoft Video Converter have edition
  characteristics, including the brightness and contrast.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  iWisoft Free Video Converter
  http://www.iWisoft.com/videoconverter/

  On the left, click the Add button to import your video, then
  Reach... The Edit button / tab effect...

• AT3-600-UR33 Acer will work GoPro Studio 2.0 video editing software?

  I am considering the AT3-600-UR33, which is available on the emachinesredeem site. Can someone tell me if this PC will allow me to start the video editing software provided by GoPro for their cameras? The minimum requirements that they list on their website are CPU: Intel Core 2 Duo; Graphics card supporting OpenGL 1.2 or higher; 4 GB RAM or more; Internal drive hard disk 5400 RPM; Quick Time 7.6 or higher. Here is the website http://gopro.com/support/articles/what-are-the-minimum-system-requirements-for-gopro-studio

  Thank you for your help

  Hi LMinCT

  The Dual core Celeron is not as good as the chip Core 2 Duo - everything will be OK.

  In theory - the answer is "maybe", but this isn't the ideal machine for your software, unless you can find another sequel that will work with the Celeron to video editing.

  The machine will run slowly, while using, even stop if HD video processing, and that it provides will allow you to install it in the first place.

  The AT3-600-UR33 is not a bad machine, it's just for everyday use.

• Help in obtaining loans for a simple video editing MBP

  I am trying to put things in place on a slightly older Macbook Pro.

  Here is my system configurations:

  OS X Version of El Capitan 10.11.5

  The MacBook Pro mid-2010

  Processor: 2.4 GHz Intel Core 2 Duo

  Memory 4 GB 1067 < Hz DDR3

  NVIDIA GeForce 320 M 256 MB graphics card

  I learned that my GPU's massively underpowered, i.e. 256 MB of VRAM is much too small.

  Through my research, I also determined that the GPU can be replaced, because I think it is welded in to the motherboard.

  In addition, my hard drive is probably not good either, quite right? Core 2 duo of is not as good as the new i7. So what are my options?

  I used to be able to run at least iMovie and slap some clips together for short videos, even add music. I lost iMovie during the upgrade to Yosemite and am trying to figure out if it's worth trying again (for $15). Before that I tried Davinci resolve 12.5 (which is more than my computer can manipulate wayyy), and then I even tried the GoPro simple studio software. Turns out that GoPro software is not that simple if you're not using images of the GoPro and my computer was struggling to convert, rendering, see even the files. And I don't think I'd be able to make the colors in GoPro calibration software, so I'm a little more than. I don't think I need all the features of Final Cut Pro, as I'm looking to throw together a few vacation pictures and some pictures again, also a timelapse here and there in the video, etc.

  I want to mention the GoPro software comes to losing me a lot of cred in this question, but this is where I am. I don't want to really go out and start building a computer for video editing (although it seems I could do relatively cheap ~ $ 600)

  Thoughts? Suggestions? What would you do if you could do it again?

  In addition, the camera that I mainly record the images and still images is a Panasonic G6

  Thanks for any help!

  What about iMovie.  .  .  have you tried looking in your AppStore account to see if it is still available as a free download?

  It is likely that you will not be able to install FCP X directly from the app store on your computer, probably, he does not meet the minimum specs for the latest version.

  However, you can download on a Mac more modern and copy it to all but you really need a more powerful Mac.

  You can download a free 30-day trial version to see if it will work in terms of: -.

  http://www.Apple.com/FinalCutPro/trial/

• How to make a simple screen of Windows 8

  How do you make a simple screen capture in Windows 8?

  E-mail address is removed from the privacy *.

  Hello

  Check this box:

  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-8/Use-Snipping-Tool-capture-screen-shots

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to make a simple survey

  Hi all
  I would like to make a simple survey in a page of an application, he concludes only two choices: Yes, and no.when, I press the button submit, I can see the percentage displayed as pie chart.how to do this? any suggestions?

  Hello

  Step 1: Create the structure of the Table and relax for the sequence. I have not give code to create the sequence. That you can create with the name DEMO_POLL_SEQ

  CREATE TABLE 'DEMO_POLL '.
  (NUMBER OF 'ID_PK',
  NUMBER OF 'RESULT ',.
  ENABLE 'DEMO_POLL_PK' CONSTRAINT PRIMARY KEY ('ID_PK')
  ) ;

  CREATE OR REPLACE TRIGGER "BI_DEMO_POLL".
  Before Insert on 'DEMO_POLL '.
  for each line
  Start
  If: NEW. "' ID_PK ' is null then
  Select 'DEMO_POLL_SEQ'.nextval in: NEW. "' ID_PK ' from dual;
  end if;
  end;

  /
  ALTER TRIGGER 'BI_DEMO_POLL' ACTIVE;

  Step 2:

  Create a new apex shape type area with table column 'Result' and that his type Radiogroup and select create static lov
  Make sure that, after you have created a region go to branch out and set to clear the cache on the same page. so it clears the value of page element.

  Step 3:
  Create another region with graph and paste after SQL query

  SELECT THE NULL LINK,
  REPLACE (REPLACE(RESULT,1,'YES'), 0, 'NO') LABEL.
  COUNT (RESULT) VALUE
  OF DEMO_POLL
  RESULT GROUP
  ORDER OF RESULT

  Hope that this would be training for you.

  And Yes, you can add me to your friend list.

  Thank you
  Stefan Bosamiya,
  + 91 76000 23053
  [http://jbosamiya.blogspot.com | http://jbosamiya.blogspot.com]

• How to make a music video appear smaller in Adobe Premiere 6.5?

  Hello

  I'm trying to make a music video appear smaller with a black background, the way movies often do when they show takes them at the end during the credits. I'm sure it's something simple, but I can't seem to understand. Any help would be greatly appreciated!

  6.5 you want to choose "transform" in the range of video effects... It is not in the folder of the transformation but... drop that on the clip and the effect control, choose window. height of 25% and 25% width and then click on the 'position' and click on the video clip in the monitor where you want the Center to be... you start there and adjust.

• How to make a button full screen for Flash Catalyst?

  Hey everybody.  I really hope someone can help me with this.  How can I make a button full screen in Flash Professional that would make my Flash Catalyst project go full screen?

  I'm sorry that I don't really know Flash Catalyst as much as I would like. Interface design is left to me, some designers to my agency use catalyst. If it's the Flash forum is as far as I can tell you. I didn't know that catalyst has not supported the Basic scripts (I thought I read that he did).

  In the end, for a very cheap price, you can do something like go to http://www.lynda.com/ and buy a subscription. Very cheap compared to what you get. They offer numerous courses on everything and I am sure that your answer would be in one of the (well broken up by subject) video training videos.

  You are looking for just a catalyst shows a bunch of courses:

  http://www.Lynda.com/search?q=catalyst&x=0&y=0

  Edit:

  For example, I watched the essential training in 2 minutes and CS5.5 chrono, I noticed that when you click on a button, you should have a 'Interactions' Panel that allows you to do things. If they do not have full screen as an interaction that is another thing, but I'm just pointing out, it is very easy to learn to do all sorts of things in the video training. If you don't want to buy a membership he just find a video that you think would have the info in there and I'll watch it and let you know if she tells me how do and how to do it.

• How to make audio and video playback at the same time in movie maker?

  I've done some films with a flip camera and edited with Movie Maker.  However, when I played movies the sound does not match the video.  The sound was going faster.  How to synchronize the two together?

  Try to download windows media encoder 9 series, microsoft, download utilities

  also... Once installed, open it, select "convert video", change how data

  is to convert, convert a folder that you have created.

• How to make a vertical video clip when it is on the side in Windows movie maker Vista

  In the montage of video clips in Windows Movie Maker how do you turn a clip when veiwing on the side? Photos have an icon for the vertical flip but not video clips, I can't figure out how?

  In the montage of video clips in Windows Movie Maker how do you turn a clip when veiwing on the side? Photos have an icon for the vertical flip but not video clips, I can't figure out how?

  ==========================================
  I assume you are using Windows Live Movie Maker?
  (if you use Vista Movie Maker 6... See the last article)

  Windows Live Movie Maker can turn a video clip, but you
  may need to convert the video to a compatible format like
  . WMV, before you can import it into Windows Live Movie
  Maker.

  See the following screenshot.

  Windows Live Movie Maker - rotate 90 ° right
  http://www.howtogeek.com/wp-content/uploads/2010/04/sshot710.PNG

  Also... the following article is maybe worth a visit:

  Shoot a video of 90 degrees with VLC or Windows Live Movie Maker
  http://www.howtogeek.com/HOWTO/14751/rotate-a-video-90-degrees-with-VLC-or-Windows-Live-Movie-Maker/

  After having shot the video... Save it in the WMV format.

  How to save the project in Windows Live Movie Maker to WMV Format
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

  And the following freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Free Video Flip and rotate
  (XP SP3, Vista, 7 and .net Framework 2 SP2)
  http://www.DVDVideoSoft.com/products/DVD/free-video-flip-and-rotate.htm
  (* You can uncheck the options to install the)
  DVDVideoSoft Toolbar and iTunes plug-ins *)

  How to use Free video Flip and Rotate
  http://www.DVDVideoSoft.com/guides/free-video-flip-and-rotate.htm

  Movie Maker - how to rotate a video taken from the Angle easily - XP - Vista
  http://www.TipsandTricks-HQ.com/how-to-rotate-a-video-taken-at-an-angle-easily-527

• Possible to crop with your home, HD video editing software? (HD-&gt; SD size)

  Hi, using first Elements 7 on Windows XP on Windows 7.

  I wonder if it is possible to get a pan and the analysis of the process with our HD video? I ask because someone gave me some pictures of the weekend where the composition was much too broad and big, and I would like to record video, consisting of best, a quality of SD.

  Given the resolution in pixels, that it should be possible. I know it's how they convert 35mm film to fit TV, but when it comes to video, first make?

  I can crop video in first but it will save the video to the same resolution, but all pixelated and looking wobbly. How do I record video 1080i pan and scanned to 720 (p) or SD (640) regular, who always will look decent on Youtube.

  Here is an example (note, I shook as 97% first images horizontally)

  

  Can someone give a tutorial?

  Thank you

  If it's video hi-def, you can import the video into a project set up for DV standard.

  Before getting the media allows you to get the video, go to Edition/Preferences and uncheck scale to the size of the image.

  When you place your video on the timeline, it will be much larger than the screen, and you will see only a part of it. You should be able to use crops and scale to get everything you need and still have plenty of pixels to spare. (And don't forget to press ENTER to make the video before you judge its quality.)

  Note that, depending on what video format is your original footage, you may need to work with interlacing may reverse the dominant field. So I would do a short test run and output to see what it looks like before I got it in an album project.