How to make a simultaneous report use security profiles?

Similar Questions

• How to make a bootable USB using the disc with El Capitan utilities?

  Anyone know how to make a bootable USB key using the disc with El Capitan utilities?

  Try this its worked perfectly.

  http://www.Macworld.com/article/2981585/operating-systems/how-to-make-a-bootable - os-x-10-11-el-capitan-installer-drive.h...

• How to make a vista to use disc to reformat my PC?

  I can't understand how make a nof windows vista copy that I need to replace the current vista operating system because it has many problems. I don't see how to do this in Control Panel and noticed the system to the top and files option, but not the ability to make the drive.  Thanks Del

  Hello

  You will need to contact your computer manufacturer for instructions on how to make recovery disks to reinstall Vista.

  It's their recovery process, not Microsoft.

  There are a few guidelines below on where to look information as well as other means to reinstall Vista.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Vista professional, comprehensive and company have the opportunity to make a backup image of the computer, but they make a copy of the existing Vista operating system, including any problems, that is not suitable for what you want to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• T-Shirt Designing (1): how to make wider white box (using the model of t-shirt)?

  CS6 using

  T-Shirt Designing (1): how to make the white box more wide inside the shirt (using the model of t-shirt)?

  Well, I learned that I can go to file > new from the template > blank template > T-shirt to start to create a design for my t-shirt.

  It shows a small picture of the t-shirt with a rectangle in the middle that also represents the large rectangle (where I create my design).

  Question, am I suppose to create the right design in the large rectangle?

  2nd... I figured out how to adjust the length and width of the largest rectangle (through the corners, then clicking on it to open the section length/width at the top of the screen). However, when I adjust the height and width, is not the same for the rectangle inside the shirt.

  What I'm trying to do, is ensure that my design takes more than forward of the sweater by expanding the width.

  How to make the small rectangle in the large t-shirt too?

  Hello

  The small rectangle in the t-shirt line drawing is a guide. So, what you need to do is unlock guides, remove the small rectangle and create a new.

  (1) go to the view > Guides > release Guides. You will now be able to edit the guides, which are light blue in my document.

  

  (2) just so that you know what I'm talking specifically, open the Layers panel and place you on the Guides layer. Click the arrow next to reveal the guides within the layer. I locked all the other layers in the document to make it easy for me.

  

  (3) select the small rectangle, and delete.

  

  (4) use the Rectangle tool to draw a new in size.

  

  5) option click on the new rectangle to open a launcher. Select make Guides.

  

  You now have a guide again, larger rectangle! Let me know if you have any other questions.

  

• How to make a Menu report

  Hi friends,
  
  I created two 2 Oracle reports, report1.rdf and report2.rdf. Currently I have it in my PC with Oracle Developer Suite 10g installed. How to deploy it
  my PC to the end-users so that he or she has only runtime executables and no privilege to report designer? Later in Dev 10g, you can not install custom to get the
  report DURATION only :(
  One last thing, how to make a menu for my user that looks like this:
  

  REPORT PRINTING MENU
  ===============
  
  1. Print Report1
  
  2. Print Report2
  
  3. Exit

  Y at - it a menu generator?
  
  
  Thank you very much

  Hello

  Developer Suite is a single component developer. For end users, you must have based application server reports Services: http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm

  Reports is only to create reports. But you can call reports from any other environment/tool with which you can create a user interface (Java, Apex,...)

  Concerning
  Rainer

• How to call oracle forms report using parameterlist for parameters

  Dear all,
  I want to know how to call oracle forms report and parameter passing between the report and the form with the list of parameters?
  can someone help me?

  What research? The forum is full of examples.

• How to make a simultaneous wink of GigE cameras?

  I have 2 cameras of 780-54gm Basler Scout (monochrome GigE) I switch to 10 Hz. This pace is modest and the data rate that results is not particularly high. I would like to get images from two cameras of the same trigger pulse. I have an Intel Pro/1000 NIC and I use the driver NEITHER appears so as National Instruments GigE Vision adapter. When I use the Basler pylon Viewer (the software that comes with the camera), I see perfect images from two cameras at the same time at 10 Hz. This tells me that the network, map NETWORK and the drivers can handle the flow of data without problem. I have activated jumbo frames. When I try to acquire images in LabVIEW 8.6 with screws IMAQdx, however, that I meet problems. I can acquire every single camera, but I can't them both at the same time strictly. The images are taken through with horizontal black lines that appear and move erratically. I have attached a vi that shows the problem. I have set up and start the two acquisitions, then enter a while loop that reads images. If I do the sequential acquisition by starting and stop them inside the loop and ensuring that we stop before the other then I get quality images but they are not the same impulses to trigger, and start and stop of the acuisitions overload slows down things so that I can not get pictures of each trigger. My guess is that it is a problem with how LabVIEW is the memory management, resulting in corruption with simultaneous acquisition. Are there settings I can change to fix this problem? I've experimented with everything I knew (buffer numbers, etc.), but without success. Rich P.S. I posted this in the forum LabView a couple of days but got no response. Sorry if you see this twice.

  Richard,

  Looks like you just packet loss. You might associate a property node to request lost packages to confirm. The reason for that happening is that even if the way to two cameras data rate is less than the limit of the NETWORK card, each camera probably goes to the complete 1000Mbit bandwidth when it transfers each picture. When transfers of images overlap, sending you to 2000Mbit/s down a 1000Mbit pipe and lose packets.

  To resolve this issue, an easy way is to adjust the attributes of Acquisition-> Ethernet advanced-> attribute peak bandwidth used for both cameras 500Mbit. This should ensure that each camera never use more than half of the bandwidth. There are also other options such as sprawl of transfer times, but those who require more tuning you change other settings.

  I don't know why the Basler software shows this, although their lack of bandwidth might just be lower at the expense of additional latency to get the images.

  Hope this helps,
  Eric

• PCS1 PRINTER IS IN OFFLINE MODE; HOW TO MAKE A IT FOR USE OFFLINE. IT WILL NOT PRINT OFFLINE!

  I DON'T KNOW HOW TO CHANGE THE SETTINGS.

  Hi JamesWilliams III,

  (1) if it works well before?

  (2) remember to make changes?

  (3) what is the model number of your Pinter?

   

  Method 1:

  (a) in the bar menu print queue, click on the printerand then look for suspend printing and printer use offline items in the menu.

  (b) ensure that there is no check box next to each item. If a check mark appears next to each item, click to clear it.

   

  Change-your-printer default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

  Method 2:  Follow the steps described in the article below

  The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer

  http://support.Microsoft.com/kb/2027593

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 3: Follow the steps mentioned in the article below to fix the printer problem

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• How to make a screen capture - using windows xp pro

  How can I create and send a screenshot of a web page using windows xp pro

  You can also use an extension to create a screenshot of the full page, including content that is hidden until you highlight the part.

  Some you can watch (there are more):

  • Abduction! : https://addons.mozilla.org/firefox/addon/abduction/
  • Great more of screenshot: https://addons.mozilla.org/firefox/addon/awesome-screenshot-capture-/
  • https://addons.Mozilla.org/en-us/Firefox/search/?q=screenshot

• How to make the load simulator using labview 2010

  I would like to ask how to load simulator using labview?

  What have you tried so far? and exactly what your tying to do?

• How to make the new display using Javascript

  Based on a given condition, I want to change what nodes are visible in a given view and then save it as a new view.

  var viewIndex = 0;

  pageIndex var = 0;

  A3D var = this.getAnnots3D (pageIndex) [0];

  var aRuntime is a3d. context3D.Runtime;

  Duquette var = a3d.context3D.scene;

  var aView is aRuntime.getView (viewIndex);.

  var i = 0;

  for (i = 0; i < aScene.nodes.count; i ++) {}

  var aNode = aScene.nodes.getByIndex (i);

  If (... check...) {

  aNode.visible = false;

  }

  }

  ... How to save this change to the visible nodes to a new view? ...

  Interactively, I can go to view > > manage views... > > new view > > Ok

  I can't find anything in the documentation or search the Internet on how to do it programmatically.

  The short answer is you can't.

  However, you pouvez add a list field or down the page or create a menu in the 3D runtime which will display a list of named views as "views" you "Save" through your code. If I did that, I would use a hidden field containing a JSON string that stores the original name of the view and the changes that your code performs. Then when one of these "views" is selected, obtained in the initial display and then review the terms that you have captured in your if statement.

  These, of course, would not appear in the model tree, but would be visible in your list box.

  J-

• How to make an index to use in a query

  Hello
  
  I have the query below for which ename column has an index. From my knowledge under 1st and 2st queries will not use index. That's why I used the 3rd statement and that too its not not using the index. Finally, I used the 4th query, but even the 4th query does not use the index. So how do this query to use my index? I need to create an index of function for it? What's the final option?
  
  1. Select * from emp where ename! = « BH » ;
  
  2. Select * from emp where ename <>'BH ';
  
  3. Select * from emp where ename not in ("BH");
  
  4. Select * from emp where ename < "BH" or ename > 'BH ';
  
  Kind regards
  007
  
  Published by: 007 on 6 June 2013 07:56
  
  Published by: 007 on 6 June 2013 08:06
  
  Published by: 007 on 6 June 2013 08:06
  
  Published by: 007 on 6 June 2013 08:06
  
  Published by: 007 on 6 June 2013 08:12

  Are you asking how to force Oracle to use an index, even if using the index will be the slowest query?

  At least that the vast majority of the rows in your table have a 'BHIOASRACRGBYOBHHNZOARYFGKZOSI' ename, it is extremely unlikely that it would be advantageous to use an index on your third request. It seems likely that Oracle will return almost every row in the table. If this is the case, a table scan will be much more effective.

  Your fourth query contains a syntax error, and it is unclear what that the predicate less is to compare against. Once again, however, if the query should return most of the data in the table, a table scan will be more effective than the use of the index.

  Assuming that ENAME is declared NOT NULL, you may be able to add an indicator of INDEX to force Oracle to use the index. It seems unlikely, however, that you really want to do when it gets the slower query.

  Justin

• [mac OS/AS] How to make a paragraph style using applescript?

  I got the new way to talk to a marked down text box, but do not understand how the word to apply a paragraph style

  the value AttGet to ' try to put this text in.

  say application "Adobe InDesign CS2.

  activate

  tell document 1

  set contents of text frame 1 whose label is "Attention getter" to AttGet --YES

  -Here's how we used to do in previous versions of CS (CS2 & 3)

  put applied the paragraph style of all paragraph of history of parent of text block "Attention getter" to 'X of paragraph Style'

  -errors so I tried these nothing is!
  --set applied the paragraph style of every paragraph of history of parent of text frame 1 that label is "Attention getter" to "X of paragraph style"-FAILS ""

  -set applied to the paragraph style of the content of the text 1 block whose label is "Attention getter" to 'paragraph Style X' - FAILS

  - paragraph style applied to the text of the block of text 1 that the label is "Attention getter" FAILS the value 'Paragraph X of Style' -

  end tell

  end tell

  Why not set a reference to the frame if found by the "whose" filter can use?

  set AttGet to "try to put this text."

  Tell application "Adobe InDesign CS5"

  activate

  say 1 document

  Try

  set AttGetTF for the first text frame whose label is "Attention getter".

  Journal AttGetTF

  set the contents of AttGetTF to AttGet

  the value applied paragraph style of each paragraph of the parent history of AttGetTF to "paragraph X of Style."

  on error

  display dialog box 'block of text \"Attention getter\' not found? "give up after 3

  end try

  end say

  end say

• How to make my PC compatible with Secure Boot?

  I want to upgrade to Windows 8 Pro but when I tested my PC with the Microsoft compatibility tool, he said that your PC is not compatible with Secure Boot.

  Can I download new BIOS files? If so, then in the folder that should I put them?
  Other solutions, you can give?
  My PC specs are:
  -Version of BIOS American Megatrends Inc. 0203
  -Microsoft High Definition Audio sound
  Graphics chipset - Chipset Intel 82945 g Express
  Motherboard - Asus P5GC-MX
  RAM - 1 GB
  Any help would be very very much appreciated :D
  ( Hope to soon move to 2 GB of RAM and get a graphics card AMD/ATI Radeon HD 5450 )
  
  
  
  

  So can I run Windows 8 without it? Will it be safe?

  Yep, perfectly fine without it, Windows 8 is compatible with Legacy BIOS without any problem.

• BI Publisher - how to make a broader report A3

  Hi all!

  The largest newspaper is A3 in BI Publisher according to the report editor, so I'm not able to create that necessary broad report.

  Could you suggest me no work around for this problem? (I have about a 50 columns)

  Thank you!

  G.

  Hi all!

  The solution:

  1. Select the worksheet in the report editor
  2. Click Properties in the left pane
  3. Here is the ability to define custom report size.

  G.