How to make a sound piece once the .swf starts?

Similar Questions

• How can I cut a piece of the ellipse to a photo?

  Good evening.

  How can I cut a piece of the ellipse to a photo?

  I have a picture and I would cut a piece of an ellipse of it and after that I want to save in a file photo.

  Hello

  To cut an image so that it has a form of ellipse, you must use the elliptical selection tool.

  Open Photoshop, then open your photo file. Double-click the photo layer in your layers palette to unlock the layer:

  

  Once you have double-clicked the layer, a dialog box will appear asking you to specify certain properties such as changing the name of the layer, opacity, etc. You can change these if you want, but for now, we will leave them in their default settings. Click 'Ok' to continue.

  

  Now that the layer is prepared and ready to be edited. Go to your toolbar. Find the box tool selection Rectangle, by default, that he has to have the rectangle tool set. To retrieve the elliptical selection tool, click and hold pressed down and a window with more pop tools - up will appear. Select the elliptical marquee tool.

  

  Now click and drag your image to an Ellipse. You will get a selection area marked by a perimeter of "mobile dash" around the selection of the Ellipse:

  

  If you're on a PC, click on CTRL + SHIFT + I to make a reverse selection. If you're on a Mac, click CMD + SHIFT + I. This will select the outer area of the ellipse that we come to draw with the elliptical selection tool.

  

  Now, click on the your keyboard delete key. This will reduce the rest of the image and the leaves you with an elliptical cut your image!

  

  I hope this helps! Let me know if you need more clarification!

• How to make transparent cluster keeping only the elements inside the visible cluster?

  Hello

  Can anyone suggest me how to make transparent cluster keeping only the elements inside the cluster visible in the front panel.

  Thanks in advance,

  Vinciane

  As I said, use the space bar for what is paint. This works. Trust me.

  PS You cannot link to pictures stored on your hard drive. We don't see them. You must add them as attachments and then submit the post they get uploaded to the servers of NOR.

• I get my email on two computers. How to make a computer out of the loop?

  I get my email on two computers. How to make a computer out of the loop without jeopardizing my Comcast email account?

  Using Outlook Express? Go to: tools | Accounts and delete the account. If you think you can it in the future, go to the properties of the account, and under the general tab, simply uncheck: include this account when receiving or synchronization.

  If you are interested, you can receive messages at a time without losing them on one.

  On both machines:

  Tools | Accounts | Mail | Properties | Advanced - Check: leave a copy of messages on the server.

  On a single computer only, make sure to delete messages after X days to satisfy your allocated space that you get from your server.

• How to make 'Save to Desktop' save the default value instead of 'This PC'?

  How to make 'Save to Desktop' save the default value instead of 'This PC'?

  Windows 10, I guess?

• In CC Dramweaver Adobe how to make my Web page fill the entire window?

  In Adobe Dreamweaver CC how to make my Web page fill the entire window?

  A width of 100% CSS.

  
  

  Body {width: 100 %}}

  Nancy O.

• How to make a web page to the size of browsers?

  How to make a web page to the size of browsers?

  Try to download the pdf file and the example in this tutorial files, which explain how to do this.

  http://www.Adobe.com/devnet/Dreamweaver/articles/bk_dwcs4_mastering_css.html

  PZ

• How to make text read-only once it is recorded and distributed on the ground?

  How to make a read-only text field after it is registered adistributed d?

  LiveCycle Designer ARE 8.2

  Exit this JavaScript code on the event:

  textField1.access = "readOnly";

  This works after the user loses the focus on the field, but after it is saved and distributed, this field is no longer "read only".

  I need to have staff insert information into a text field and try it then distribute to clients, and these fields must be protected.

  How do you do that?

  No... .it has to be there to be a schema valid... but it is not used by the product offline.

  Paul

• MacBook Pro sound stops once the connection when plugged headphones

  On my MacBook Pro, when I connected my jack 3.5 mm (headphones or speakers) and I switched off, the sound stops once I have connection, once again. The speaker icon is gray and I have to remove and reinsert the connector to get her back. Can you help me, please? Thank you.

  Check your settings in the Audio Midi application located in the Utilities folder.

  http://support.Apple.com/kb/TS1574 Troubleshooting for any audio speakers on Macs

  
  

  Trick/Tip: Open GarageBand if installed then, open a program (optional).

  Quit out of the app from GarageBand.

  =====================

  Repair Mac mysteriously mute

  The background on the issue, is that there is a switch small sensor inside the plug headphones. When you insert a headphone jack, the sensor includes what is what and changes the setting of audio output for headphones. If you insert a jack for digital audio output, the unit switches to digital output. When you completely remove the plug, it should read the internal speakers.

  The spirits tell me that there is a very good chance that you recently had something hostage in this port, a set of headphones or a cable leading to powered speakers, for example. When you remove the plug, something in the port have prevented triggering sensor properly. That's why you see Digital Out instead of the internal speakers.

  The solution is to force the sensor to do its job. The safest way to do this is to simply run a plug in and out of the port, a few times. A large part of the time, this takes care of the problem by triggering sensor correctly. If this does not work, there may be dirt in the port. Before moving on to more invasive techniques, get a can of compressed air, plug the small tube which corresponds to the nozzle and the breath to air a few shots in the lane. With a little luck, should dislodge dirt and the port will operate as it should.

  If this does not work, find a swab to foam tip that fits (electronics stores generally carry), dip it in rubbing alcohol and insert gently into the helmet in an attempt to wipe any tenacious dirt. I recommend foam rather than cotton fleece because the variety of cotton could leave the son behind. (This same technique works well with the bad conduct of ports from headphone output on devices such as iOS devices).

  It is possible that dirt has nothing to do with it. On the contrary, it may be that the switch should just a subtle help. If a socket or a buffer does not work, I have heard people resetting successfully with a deft poke with a toothpick.

  http://www.Macworld.com/article/2031146/repairing-the-mysteriously-muted-Mac.htm l

  

• How to make a bootable USB using the disc with El Capitan utilities?

  Anyone know how to make a bootable USB key using the disc with El Capitan utilities?

  Try this its worked perfectly.

  http://www.Macworld.com/article/2981585/operating-systems/how-to-make-a-bootable - os-x-10-11-el-capitan-installer-drive.h...

• How to make fonts and icons in the menus for each larger screen?

  How to make larger fonts and icons in the menus on my iMac screen?

  You can change the size of icons, arrange them in a grid and set other preferences for items on your desktop by changing the options to display on your desktop. To change your desktop view options, click on the desktop and then choose the command view > Display Options from the menu bar. You can try different settings to see which ones you like, you will immediately see the effects of your changes.

• How to make a backup copy of the emails from Inbox?

  How to make a backup copy (on a memory stick) of all e-mail messages in my Inbox?

  Hello. How to do an export of the new Webmail Outlook?

  Thank you!
  Jacqui.

• How to make a formal complaint about the low level of support?

  Recently, Adobe has cancelled my account because of no payment, it's because I've lost my credit card linked to my subscription. I spent a lot of time trying to update my account payment settings online, but it does not work. I tried to contact someone via the support portal to help me update my payment method by using my new card. They sent me a link to update my card details as I did. During my next payment is due I always charged to my old card and receive an invoice by e-mail (this is not usual). Then I get another email telling me that my account was cancelled. When I check my bank account I was accused $76,13 by adobe (a strange amount). I contacted someone through the portal of support and asked why I had been charged this total and why my subscription has been cancelled. After providing all the payment information for him I had, he said that he had no record of it in his system. He said while "in this case I have to escalate the case to the next level, he will get back to you in 2-3 days by e-mail. I have not received email for more than a week. When I received an email in East of "support non-response' who said ' I have asked the team concerned to study in what respect $76,13 billed and will come back to you once we hear from the team." I answered twice and provided for my bank information confirming the money deducted from my account by adobe and have had no response in 3 days.

  I think that this level of support is not entirely satisfactory and that a problem like mine should be treated with a higher level of care by the support team. It shouldn't take more than a week to send me an email telling me that they had someone looking into it. I asked my membership be reactivated with no response.

  Does anyone know of a number of direct contact or email so that I can reach out to someone who may be able to solve my problem at a faster rate? and also to make a formal complaint about the abuse by management.

  Thank you very much

  Emily

  Unfortunately there is no substantive complaints hotline.  If you can find a member of the staff of Adobe here in the forums and send them a private message, they would be willing to go further and push your question through resolution.

• How to make a square patterned with the same race grounds match-up?

  I have a square that is filled with a pattern, he needs a stroke to so that it can be scalloped.  How to make the model of race and fill out the template match-up?

  You could have transformed one of the models. I try and first just apply a color background and outline of bost. Then apply the model again and not become one of them.

  Another option would be to expand the line and fill and combine the shapes, so that you don't have to deal with the construction of a complex.

• How to make a backup copy of the purchased software?

  Hello world:

  I just bought PhotoShop elements 12 (download).  How to make a backup copy of this software?  In the case of a system Crash.      I have a copy on my desk and in my Menu start.

  Hi stanulg1952

  Must not be a copy... In case your system crashes, you can download it again...

  Otherwise, you can write on an optical disc and use it in the future... But make sure you keep the installation files on the disk, not one that are there on your desktop after installtion