How to make a transformation of Fourier data acquired over a long period?

Similar Questions

• How to make a transformative effect ignore the line attributes?

  Hi all

  I am intermediate (at best) with Illustrator. I use CS6 on an iMac 2009.

  Could someone advise me on how to make Illustrator ignore STROKE weight/CAP/join parameters when I apply a live effect make rotate/multiple copy on a group of paths? Currently, Illustrator defines the rotation point to the extreme point of my stroke (contained in the atrributes of traits), but I want only to calculate the track structure: the coordinates of my anchor point designated.

  

  Here are the top/right of paths with a rotation Group / 3 copies effect of 90 degrees. This view looks without problem.

  

  This band of the top/right of the railways with the addition of a reflection / 1 copy effect of the x-axis. Still no apparent problem.

  

  But this is a close to the alignment of the corner points. As shown, the transformation indeed is based on attributes of the strokes (the tip of his corner), not the actual location of the corner point.

  It does not help to apply styles different heading a corner or race alignments; that only slightly Wizz the pivot point to the Center.

  In addition, this race of a point is somewhat arbitrary. I only put it so in order to see my dynamic effects.

  Refine vertical and horizontal effects of the elements turned/copied movements won't help because this art will subsequently undergo a lot of alteration, changing money, especially in the weight of the stroke (thickness of the line maybe same variable).

  I need the skeleton of the struct to snap together precisely.

  Any solution, regardless of how roundabout, would save this project! I'd appreciate some advice.

  Assuming that you did clean:

  1. check the order of the effects and strokes: this is important if you first apply the effect, then the stroke or vice versa

  2. check that "Snap to grid of pixels" is turned on

• How to make instant consolidation if the data store is out of disk space...

  Hello

  I have a virtual machine that has left many of the snapshot files and now can consolidate using the tool (he always said of disk space to make the consolidation)

  The data store have now 60 GB of free space when the space data store maximum disk is 850 GB and the busy VVMM over almost 700 GB of disk space...

  Can I attach a 3 TB USB drive to the ESXi server and move all the files through or another way to do...

  HELP ~ ~

  With the disk space required on drive E, it may be useful to consider an alternative:

  • create a (much smaller) another virtual disk
  • Stop all of the services entering drive E
  • Copy the data from drive E more to the new virtual disk (for example using robocopy)
  • switch drive letters
  • Once everything is working as expected, get rid of the old virtual disk

  This will not only reduce the disk space used on the data store, but also to ensure that the virtual disk cannot grow more.

  André

• How to connect hour as well as data acquired in a binary file

  I want to record some data acquired with the time it was acquired in a binary file. Later I should be able to reproduce the waveform with the same time, with which it was acquired. Can someone help me with an example vi.

  Kind regards

  Here is a player for your burner. Just change the Boolean constant that you have wired to the "Prepend array or string size?" true. (post the VI, but I do not know which version you use)

  

  Best regards

  David

• How to make a unique clip fade to white over time?

  I was chugging along using the full version of first Pro CC for a few months now and I need to make an image of the object in my new intro to natural color change it's pure white over a short period of time just before he explodes with electricity, I tried the effect of color change , but this doesn't seem to work with the color white for some reason any... Please help ASAP! Any help will be greatly appreciated!

  Fade to white video effect.

  

• How to make a USB-TC01 temperature data a global variable?

  Hi all!  I have a simple question (probably).  I bought the box USB-TC01 and with the software came a VI called LabVIEWTempLogger.  This VI reads a thermocouple voltage and internal conversions using DAQmx and a CYC edge to give a reading of simple temperature.  My problem is that I want to use this temperature in an another VI, then I want to make a global variable of temperature of LabVIEWTempLogger.  How to set a global variable such as temperature of LabVIEWTempLogger?  Thank you!

  You must get out of the recorder temperature VI the DAQ Assistant. Put it in a Subvi if you wish.

  Your main VI has some problems. The first fact a comparison is equal to the current temperature. Never make an equal comparison on a floating point number. Use in the range and force.

  The local 'Set Temp deg C' should be replaced by a wire from the Terminal. All local variables should be replaced by a wire. You can easily have the cable terminals from outside the main loop.

  Can't the difference in code in the States True and False when you read voltage.

  Don't use VISA bytes to the Serial Port. It's just bad style. You programmed it for a terminal character LF to get rid of fixed forward and set the number of bytes to read at a high number. Playback will wait until the stop character is detected and then automatically end.

  Finally, you have already created a world so I do not understand your questions about it.

• How to make a loop that records data block without having to navigate to it

  I have a form with 2 tabs. Tab_1 displays the information of the monitor and tab_2 raw_data (that the user attempts to insert/update or delete) for the monitor. The two tabs have a button 'Post production', which messages the raw_data (in tab_2) to the database. If it is an update operation, I have to check if a column_value_1 has changed from what is present in the comic book. If so, then the user should be given a warning. The warning would be appropriate if the column_value_1 for any 1 record is changed. Therefore, the comparison can be stopped after first difference. The code in the when_button_pressed trigger looks like
  
  go_block (raw_data());
  first record;
  loop
  If value_changed then
  v_alert: = true;
  "exit";
  end if;
  IF: SYSTEM. LAST_RECORD = "TRUE" THEN
  EXIT;
  ON THE OTHER
  NEXT_RECORD;
  END IF;
  end loop;
  
  If v_alert then
  display_alert;
  end if;
  
  This should work fine if I'm in tab_2 (which displays the block of raw_data). But if I hit the 'Post production' button tab_1, go_block (raw_data()) would go to tab_2, I do not want to make. So, how can I browse the raw_Data in tab_2 block without having to navigate to this tab?

  Prosper,

  I don't have what it is possible to loop in a block without having to navigate to it. Instead, you can navigate to the control you are calling by GO_ITEM integrated.

  Kind regards

  Manu.

• How to make a table with all dates between two dates

  Basically, I need a vi that returns an array with elements containing all individual dates between the two dates. I am trying to build one myself... but obviously if there is already a few vi do that I would use it instead. Anyway, any help is appreciated... I'll just be over here write it too hard to pass the time.

  Just an idea

  Output is the table of dates (like timestamps) between the timestamps 'Start' and 'end '.

  

  Marco

• How to make a backup of the data of mounted drives

  I am currently running Windows Server 2008 R2 Enterprise and attempt to use Microsoft Backup Server version 1.0 to the backup of files/folders specific to both local drives and the drives that were mounted from other servers.  My problem is when I set up the backup to run, none of the mounted drives are available in the backup utility as a choice for me to select the backup files from.

  That's how the utility was designed?  If so, what other options I have to backup of disks folders/files the and mounted on this server?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/threads

• How to make a hyperlink with dynamic data from a php database table?

  Level - the rare user Dreamweaver

  I have a couple of master / detail standard of pages using MySQL and PHP. This feature works correctly. Among the items of data in the Details page contains the name of a PDF file (including the .pdf suffix). PDF files are stored in the library of PDF documents under the root of the Site. I am eager to the ability of the user to the page to watch the associated PDF. Keep it as simple as possible I just put in place a text field "View report" followed dynamic text for the name of the document. I tried to set the properties of the links with the library name PDF files (more the root level) followed by the code, I thought that it was necessary to determine the selected PDF (<? php echo $row_rslivesDetail ['link'];? >). The first part is correct, because when the code does not have I changed it to a PDF fixed and that worked. I have tried various combinations but failed. Can anyone please suggest what I'm doing wrong with the code.

  Concerning

  Cliff

  I think you have your recordset named incorrectly. The image you provided according to me it should be: (see highlighted in RED below)

  ">View the report

• How you make a backup of the data of Thunderbird?

  I have it running on a laptop Acer Aspire

  in the basic knowledge of here https://support.mozilla.org/en-US/kb/profiles-tb#w_backing-up-a-profile

• How to use the acquisition of input data acquire a signal at a frequency while writing to the file at a different frequency

  Hello I'm trying to read in a temperature of a thermocouple and displayed on a waveform graph and at the same time, I want to write data to a file at a significantly lower frequency.  Currently, I am sampling data acquisition at chaque.01s and I would like a sample to write to the file every 2 s.  I thought of activating/deactivating the option activate the relay every 2 s, but I don't know how to do that and I wouldn't be surprised if there is a standard way to do this, but I've not been able to find.

  Thank you

  Miguel

  

  If you are sampling of chaque.01s and you want to write a snack every 2 s, what about all the other samples?  You want to just throw away?  You read so 200 samples in 2 seconds.  But you want to write a sample.  You can do it if you don't mind losing the other 199 samples.

  You could use the elapsed timer function and the release of the elapsed time of a structure of business wire.  Put your writing inside the real deal function.  Nothing in the case of false.  Make sure that all of the timer to reset automatically.  If every two seconds, the case will be set to true, and will be called the write function.

• How to overlap the 2 images of data acquired in real-time?

  Hi all

  I'm now a measure of the FRET in the laboratory. 2-channel data are acquired and shown in 2D images separately analysis by using Labview. They are at the same scale and pixel. Now what I want to do is to put them into a single image, but the signals are shown in two different colors.  Or in another word, cover them in the same image. How this could be done? BTW, I now work with LabVIEW 6.1 (I know this is a pretty old version, but since the work earlier are to do with that, I have to stay with this version). Thanks in advance.

  Dear Franceing,

  I have studied your request, but I'm not convinced that you need to stay with the old version of LabVIEW. You can upgrade to the latest version of LabVIEW, but in this case you need to upgrade your nationalities created in version 6.1 Traoré. This could be quite a big job (if you use a lot of 'old' vi), but will give you the latest features and ease of use of LabVIEW 2009 in return.

  For your question, you might think using the function "IMAQ And.vi" (if it is available in your version). This function works as a logical AND (or NAND) VI and merges the two images together.

  I hope this will help you develop your application!

  Best regards

  Peter S

• How to make a LabelField align right when the text is long?

  In order to make a good LabelField aligned, I create the LabelField with style "FIELD_RIGHT and add it to a value for money, it works when the text can be displayed on a single line." But when the text is long, over a single line, it works well.

  For example, if the text is "ABDEL FARZAD", appears like this:

  

  It looks like aligned left

  How can I get it?

  .

  No guarantee, but instead of Field.RIGHT, try

  FIELD. USE_ALL_WIDTH | DrawStyle.RIGHT

• How to make text disappear when the mouse is over a button?

  Hello, I'm completely new to Flash, and well I need help. I created a page that contains static text in the Center.

  Page has buttons on the side and when I rollover a button text is displayed, but the problem is that when I rollover a button, static text in the Center is here and I want to hide as I can't read anything either because the texts are overlapping.

  How can I make the text in the centre disappear / hide when I rollover a button and how do I make it reappear when the mouse is the off button?

  I hope what I said makes sense.

  You can assign the code onRollOver and onRollOut buttons to the dispappear of text, but you will need make the text a movieclip with instance name that you can use to target to make it invisible.  In the example below, the button has an instance name of "btn" and the movieclip of text has an instance name of "text_mc".

  btn.onRollOver = function() {}

  text_mc._visible = false;

  }

  btn.onRollOut = function() {}

  text_mc._visible = true;

  }