How to make a USB-TC01 temperature data a global variable?

Similar Questions

• How to make a USB bootable windows 7 or windows xp or any other

  How to make a USB bootable windows 7 or windows xp or any other

  tajamulfayaz

  The link below is a tool that will use a Windows ISO file and make a USB bootable for you.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

• How to make Toshiba USB 250 GB HARD drive read-only?

  Hello

  I just plug a Toshiba USB 250g external hard drive to replace all the sticks of memory, I've been using.

  I'll use this external hard drive to copy files to other computers and I would like to know how to make the drive read-only.

  Moreover, all the other tips to protect the disc would be extremely welcome.

  I use a Dell with Windows 7 laptop.

  Thank you very much

  Dougal

  I don't know what HARD drive you have exactly, but I know that Toshiba offers a software protection with external hard drives.
  Did you check manuals? Is something like that provided with your HARD drive?

  Maybe you need to use some third party software part for the protection of files on the HARD drive. Google all over the place.

• How to read a USB-TC01 with VB6?

  I inherited a program existing datalogging, written in VB6, I want to extend to read my USB-TC01.  I never did any acquisition of data in VB.  Can you help me?

  I searched this forum and Web site of NOR and came up empty.

  Jim,

  You could do a dll in LabVIEW that reads the tc01, then call that since Visual Basic.  I have created/joint an example of what I mean, you can extend it to add the bells and whistles.  It should be fairly simple.  I hope it helps.

• How to make a USB recovery

  Hello

  I all ready have a 16 GB usb driver ready too go and I would also like to make a usb for my W700 acer recvery, how can I do to make this point, I can't get the cd has A I don't have a usb cable and B I don't have a USB drive, CD drive, so I would also do a recovery on my USB 16 GB USB

  Maximillian wrote:

  I'm fighting with an appearance of bricks, or DOA to-100.

  I'm trying to reload the system files,

  can access the Android system recovery utility.

  Can not find a way to select or implement recovery

  the menu selection?

  Any advice would be appreciated.

  M

  I would like to do your own Ant about it

• How to make instant consolidation if the data store is out of disk space...

  Hello

  I have a virtual machine that has left many of the snapshot files and now can consolidate using the tool (he always said of disk space to make the consolidation)

  The data store have now 60 GB of free space when the space data store maximum disk is 850 GB and the busy VVMM over almost 700 GB of disk space...

  Can I attach a 3 TB USB drive to the ESXi server and move all the files through or another way to do...

  HELP ~ ~

  With the disk space required on drive E, it may be useful to consider an alternative:

  • create a (much smaller) another virtual disk
  • Stop all of the services entering drive E
  • Copy the data from drive E more to the new virtual disk (for example using robocopy)
  • switch drive letters
  • Once everything is working as expected, get rid of the old virtual disk

  This will not only reduce the disk space used on the data store, but also to ensure that the virtual disk cannot grow more.

  André

• Portege 3480CT: how to make a USB bootable floppy drive?

  I need help to make a USB bootable floppy drive.
  My laptop 3480CT has not the traditional floppy drive instead, it uses a USB floppy drive and the bios has an option to boot from USB FDD.

  I would like to use a USB key to start (a Lexar Jumpdrive 32 MB 05dch 0080 h and GTX 1 GB 1516 h pid pid 8628 h), instead of the floppy. I want to load the boot XP on floppies, so I run recovery programs using chkdsk.

  I tried the usual suspects, the bootloader makebootfat and mkbt20 HP.
  I tried the demo version of the commercial product Flashboot.
  I photographed a floppy back 5.0 system on the USB key using the I-Setup demo.
  All failed including the specific option in the makebootfat images for FDD option and 3 different options of Flashboot.

  I ran
  http://Enos.itcollege.EE/~mkalme/Pahn/tut/tut.html

  Using Hexplorer ICY, I was able to confirm that the DOS5.0 on the boot sector pendrive is identical to the diskette.
  I could start in Dos5.0 from a floppy disk with drivers USB Panasonic and confirm that my Lexar was a system of 1.44 MB disk and command.com displayed in the directory. The GXT is not recognized by the Panasonic, nor BACK USB drivers to Duse 4.4 4.9. Another worrying indicator, it is my computer XP did not see all of the files on the pendrives, not command.com, or two hidden files (view all the hidden files option).

  I learned that Transcend a specific option that creates a bootable 1.44 mb floppy
  image on their USB key.

  Here is what I have gathered, corrections and suggestions are welcome.

  Interface USB the USB protocol specifications

  bInterfaceSubClass field specifies the Protocol
  01 order reduced block (RBC) a flash device
  UFI 04 a floppy drive floppy drive
  05 FDD SFF-8070i SFF-8070i command blocks however, funding may be in a different subclass for example RBC

  bInterfaceProtocol field specifies the transport protocol
  00 control/Bulk/Interrupt (CBI) with break of completion for FFD only
  01 CBI without interruption of completion for the FDD only
  transport in bulk only 50 h, including priming

  I don't know if the USB controller must imitate the FDD Protocol.

  Any ideas?

  Hello

  You cannot boot from the USB key.
  The BIOS of the laptop does not support something like that.
  Laptop factory supports and use different BIOS versions. As far as I know on this laptop Toshiba BIOS was installed.

  To my knowledge this BIOS does not support booting from the USB key, but only the HDD, ODD, LAN or USB - FDD.
  If you want to boot from USB FDD, you can create a bootable FDD floppy.
  Windows operating system creates the boot floppy drive when you right click on the connected floppy drive and select format. Then simply choose the option create MS-DOS startup disk start.

• with the NI USB-6218 temperature data

  Hi friends,

  I have a question. I need a card to acquire and generate different types of data. 6218 OR card seems to be adapted, but there is no information on temperature data on its spesifications. Does anyone have an idea if 6218 is suitable for temperature data?

  Hi aero,.

  TC type K have a sensitivity of ~ 41µV/K, while the 6218 specifications give a minimum precision of 88µV (with a sensitivity of ~ 5µ).

  You will then receive a precision of about 2K for your measure - as a rough estimate...

  If it's ok for you: just try it...

• How to make a USB stick into a bootable image

  I did a complete reinstall of windows xp to sp3

  I'm doing a usb key that will start a linux system

  usb in question has been used before on a windows vista and windows 7 and starting machine

  Why can I not make an usb device bootable on windows xp machine work?

  The problem is probably not the key USB but the BIOS that is loaded onto your computer motherboard.  When Windows XP came out, USB was relatively new and had not reached the sophistication to address such opportunities that boot from USB.  Things have changed a bit since then and newer machines have no problem using USB as a bootable media.  Your only chance would probably be to see if there is an updated BIOS available for your machine.  You can check your manufacturer's Web site or the Web site of the manufacturer of your motherboard to see if one is available.  Do your homework and proceed with caution because an installation or an update of the BIOS failed can easily turn your computer into a boat anchor.

  You can consider using a Linux boot CD instead of the USB key for this computer.

  HTH,
  JW

• Digital control system, using limits of entry of data with global variables

  Hello!

  I have a Subvi with several digital control sliders. These control framerate, the pixel clock and exposure of a camera and their change in max/min/increment whenever one of them is changed - they are interdependent and get their information from the camera continuously during execution.

  I'm trying to remote control this VI, but during the passage of a value using global variables, it doesn't "stick".

  Example:

  The value for exposure is 237,48 Ms. different values are constrained to the nearest value. So if I pick 240,00 ms at the Subvi, he should know that this is not a valid value and change to Mrs. 237,48.

  But it is not do and I don't know why. When I enter the values manually, it works fine.

  Any suggestions?

  The limits on the controls that apply when their control from the front and is not passing values via the connector pane.

  You should use something like "line and force" within the VI to validate the values are within the range (maybe constrain data or return an error).

• Satellite U940 - 12 c: how to make recovery USB pendrive having only 2 DVD

  Hello.

  I have a netbook Satellite U940 - 12 c, a software problem causing a HARD drive format and the SSD. Finally, I got the free Toshiba Recovery DVD (as it was not my fault, but a software one), two recovery DVDs.

  And that's all I've got: an own Satellite, without partition recovery or any data in HDD or SSD. and the recovery of two DVD. Since my laptop doesn't have a DVD player, and I don't have an external, my question is simple: How can I make a boot USB key recovery by using data stored in the recovery DVD?

  If anyone can help... Thank you!

  > How can I make a boot USB key recovery by using data stored in the recovery DVD?
  In my opinion this isn't possible.
  You cannot simply move the data from DVD 2 disks to USB. I think that this will not work.

  In your case, you will need to use an external USB CD/DVD drive in order to retrieve the laptop using both disks.

• How to make a USB bootable rKill and manage to get a copy of a Windows Vista repair disc?

  I had a Trojan horse, don't know what kind of Trojan horse, but a Trojan none-the-less. Now I would like to repair vista, like you used to be able to repair XP with a disc. First of all, I would like to remove completely all the malware from my computer, BUT, I need rKill to kill all processes that can be associated viruses.

  So, nobody knows how to create a disk bootable rKill (that there not using Solution Explorer, the [portable] mouse pad)
  Also I need a copy of the ERD for vista please, don't know where to find one, but it would be nice to have one standby.
  Thank you.

  Hello

  the way XP to do a repair installation by booting from the disc does not apply to Vista

  a vista repair install is done from within a vista operating system

  and to do a repair installation, you must borrow a DVD of Vista to Microsoft, not an Acer, Dell, etc. recovery disk

  read the below tutorial on how to do a Vista repair install

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Here's how to do a startup repair disk; There is NOT a disk of resettlement:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and for any question regarding rkill, post the link below because it is their product:

  http://www.bleepingcomputer.com/forums/topic308364.html

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How to make a usb connection between 2 computers.

  I have a son with two heads identical usb in, and I want to make a connection between 2 computers.

  With just a single cable with standard USB plugs on each end, none.  Is not possible.

• How to make a loop that records data block without having to navigate to it

  I have a form with 2 tabs. Tab_1 displays the information of the monitor and tab_2 raw_data (that the user attempts to insert/update or delete) for the monitor. The two tabs have a button 'Post production', which messages the raw_data (in tab_2) to the database. If it is an update operation, I have to check if a column_value_1 has changed from what is present in the comic book. If so, then the user should be given a warning. The warning would be appropriate if the column_value_1 for any 1 record is changed. Therefore, the comparison can be stopped after first difference. The code in the when_button_pressed trigger looks like
  
  go_block (raw_data());
  first record;
  loop
  If value_changed then
  v_alert: = true;
  "exit";
  end if;
  IF: SYSTEM. LAST_RECORD = "TRUE" THEN
  EXIT;
  ON THE OTHER
  NEXT_RECORD;
  END IF;
  end loop;
  
  If v_alert then
  display_alert;
  end if;
  
  This should work fine if I'm in tab_2 (which displays the block of raw_data). But if I hit the 'Post production' button tab_1, go_block (raw_data()) would go to tab_2, I do not want to make. So, how can I browse the raw_Data in tab_2 block without having to navigate to this tab?

  Prosper,

  I don't have what it is possible to loop in a block without having to navigate to it. Instead, you can navigate to the control you are calling by GO_ITEM integrated.

  Kind regards

  Manu.

• How to make a transformation of Fourier data acquired over a long period?

  Hello

  I am trying to configure Labview such as my data will be collected during the 10ish minutes and then have it handle all data in a Fourier transformation. I know that measuring the spectral power "tool" allows for the FFT, but my current attempts seem to have LabVIEW occupying in a limited time with a value of measures. Would it not be possible to achieve my goal without having to resort to the backup of the data I do then compile and analyze separately?