How to make available public folders after a SCR failover

Similar Questions

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.

• How to make the paper dirty after update links?

  Hello

  I use the code to update the link between resources by providing new URI below. The relationship between resources are updated, but the document is not become dirty.

  InterfacePtr < ICommand > updateCmd(CmdUtils::CreateCommand(kLinkResourceStateUpdateCmdBoss));)
  UpdateCmdData InterfacePtr < ILinkResourceStateUpdateCmdData > (updateCmd, UseDefaultIID());

  updateCmdData-> SetResource (REF.) GetUID());
  updateCmdData-> SetDatabase (REF.) GetDataBase());
  updateCmdData-> SetNotify (true);
  updateCmdData-> SetUpdateAction (ILinkResourceStateUpdateCmdData::kUpdateURI);
  updateCmdData-> SetURI (newURI);
  updateCmd-> SetUndoability (ICommand::kRegularUndo);
  CmdUtils::ProcessCommand (updateCmd);

  How to make the paper dirty after update resources?

  Thank you

  Use PreDirty(); before your change.

• How to make a public folder on skydrive?

  Hello. I need to make a public folder.

  The system cannot me. How to solve this problem?
  Oscar
  
  January / 2012

  Hi Oscar

  You can get assistance to Skydrive from the experts at the following link.

  SkyDrive Support Portal:

  http://windowslivehelp.com/product.aspx?ProductID=6

  Concerning

• Deletion of public folders after migration to SBS2008

  We migrated to SBS2008 SBS2003 and are now trying to the commission out of the SBS2003 server, but we cannot solve the problems of public folders.  We have completed all the steps to move the replicas and content etc., replication seems to have occurred, but the Instances of public folders folder still shows a lot of entries.  Even if we create a new public folder database, Public folder "exchangeV1" still shows a KB of size and we cannot remove the public folder store.

  Can you offer any suggestions please?

  Hi Graeme2319,

  Did you replicate the PF of Exchange 2003 to Exchange 2007 correct?
  To clarify this review statistics PF on Exchange 2007 to check if all the PF is to Exchange 2003.

  Get-PublicFolderStatistics

  More information:

  • View public folder statistics
  • Configure the public folder replication
  • View point statistics public folders
  • Management of public folders
  • Understanding public folders

  If you complete successfully with replication, continue with the steps below:
  Note: be very careful with ADSIEdit, always to have backups before using it.

  1. click on Start, point to programs, point to Administrative Tools, and then click ADSI Edit.

  2 expand the following items:

  Configuration container
  CN = Configuration, DC =domain_name, DC = com
  CN = Services
  CN = Microsoft_Exchange
  CN =Your_Organization_Name
  CN = Administrative groups
  CN =Your_Administrative_Group_Name
  CN = Servers

  Note In this procedure, domain_name represents the name of your domain, Your_Organization_Name represents the name of your organization, and Your_Administrative_Group_Name_Or_Exchange5.5_Site_Name represents the name of your administrative group or the Exchange Server 5.5 site.

  3. right click on the Exchange Server 2003 server object and then click Remove.

  4. click Yes in each dialog adsiedit prompting you to confirm the deletion.

  Article: 833396 KB

• How to make readable text fields after the filling of data

  Hello
  
  Once we get the data in the message text entry fields, we have a few only readable areas.
  I tried to make these fields as readable as follows:
  
  In the property inspector Table RN, I changed the functional property of 'Read' only True value
  But in the custom OAF page, text box is missing for this field.
  Could someone help me how to do this?
  
  Thanks in advance
  Nanoo

  Hi Nanoo

  Here's the modified code, you can use

  public void setReadonly()
  {
  XXIDVOImpl vo=getXXVO1();
  Row poRow = vo.first();
  for(int i=0;i
  

  I hope that helps!

  Thank you
  AJ

• How to make default desktop screen after signing in?

  When I log on El Capitan mail automatically window opens. How can I do screen the default screen after my login?

  You should uncheck the option in the closing dialog box:

  

  And in system preferences > general control, close the windows when you exit an application.

• WXPHOME PAINTING under 'view' link is removed the option "toolbar text" - anyone know how to make available pls? Thank you

  Hi, I'm wanting to add text to a form of jpeg image. I can use the link in the menu 'A' to do it now, but I wanted to change the font, etc.  I read the content of help on the paint to see if there was a way to change the police etc & he says under the 'view' link on the bar menu, click on "text toolbar. but this option has been removed while the broad lines of the words are seen. It is not available. ive tried using different formulas for example, blank page in the paint to see if this only happens with a jpeg image, but it doesn't seem to make a difference.

  Ms. phone 'support' said that they could not help & wanted to put me through a tech for $80!

  any help would be appreciated.

  Hi eddieb -.

  has worked...! Why isn't this in the Help menu for painting that I do not know! Why ms wants to pay $80aud to tell me is also an another shame...

  I chose the 'a' for the text... then dragged the blank square of the size I wanted to paste (or type) something in and like you said the option showed. Once I selected it, it pops up every time.

  Why the option is not displayed permanently is beyond me esp when there is no mention of having to go through any action before they appear in the Help menu also!

  Thank you again very much appreciated... Anne :)

• How to make an animated Flash after clicking on the button?

  I think that the title is explicit... in any case, I want to make my buttons make a cool animation (like rolling or explosion), but until AFTER they are clicked, someone has a simple explanation? I use CS3 btw, thanks!

  Create them as movieclips and make them animated based on the interactions of the mouse.

• How to make PC to lock after _ minutes?

  I am very new to this PC W8. 64 bit.

  I had Vista before. With Vista, you can set the amount of time where pC was slow and the screen saver would come to the top. Then, when the mouse has been moved, you have to put the password to open the PC. He was loved locked for you so no one could use it.

  I can't find this on Windows 8. I have seen that the place to put the screen & sleep...  But even after that, it shuts down, it does not lock it.

  It seems that the only way to lock the PC has to close... ?  I want a set the time etc. for this... Any help is very appreciated. Thank you

  http://www.windowstechinfo.com/2013/07/Windows-screen-Server-auto-lock-not.html

• How to make available for Windows Kuler &gt; Extension?

  I have favorites of color that I would use in CC.  How can I get Kuler in my WINDOWS > Extension? I tried to sync, but it is not yet here.

  Please confirm that you are using the latest version of PhotoShop - CC 2014 before installing the Kuler Panel.

  If you use a Windows computer, please restart and look out for a pop up in the lower right corner to confirm installation has been completed.

• How to make a subform visible after the form email

  Here's my script for an e-mail button1 that runs a one(see below) invisible and hides a subform (form1.HR_USE.) Hide_HR):

  flag of the var = false;

  While

  (flag != true){

  var CheckPW = xfa.host.response ("Password required", 'Comments' "", 0 ' ");

  if (CheckPW == "123"){

  Form1.HR_USE. Hide_HR. Presence ='hidden';

  Form1.HR_USE. Hide_HR. Mail_Staffing.execEvent ("Click");

  flag = true;

  } else {}

  If (CheckPW == "") {}

  flag = true;

  } else {}

  xfa.host.messageBox ("mot word password incorrect, please try again!", "", 0.0);

  }

  }

  }

  Here is my script for email invisible button2:

  var

  myDoc = Event.Target;

  var

  address = "[email protected]";

  var

  sub = "Form ";

  var Sender = (form1. Page1.New_Hire.Group_B.EmployeeInfo.RowA.PositionTitle.RawValue+'-'+form1. Page1.MANAGER_APRO. HiringManagerName.rawValue);

  var msgBody = "see my form attached.\n\nThank you!"

  myDoc.mailDoc ({bUI: false,})

  cTo: address,.

  bassujetti: void + sender.

  CMSG: msgBody + "\n\nRegards\n."

  ({cSubmitAs: 'PDF'});

  I also have the script for the button2 event PostSubmit e-mail:

  Form1.HR_USE. Hide_HR. Presence ='visible';

  Everything works fine, I am able to send the form but the postsubmit script does not work!

  I love the subform: form1.HR_USE. Hide_HR to becomes visible

  Where I'm wrong?

  Thank you

  I haven't used the postSubmit event, but I think it's maybe because the button that you use is not using this functionality built-in.

  What happens if you put the line at the end of the submission script you?

  var myDoc = event.target;
  var address = "[email protected]";
  varsub = "Form ";
  var Sender =(form1.Page1.New_Hire.Group_B.EmployeeInfo.RowA.PositionTitle.rawValue+" - "+form1.Page1.MANAGER_APRO.HiringManagerName.rawValue);
  var msgBody = "See my  Form attached.\n\nThank You!";
  myDoc.mailDoc({ bUI: false,
  cTo: address,
  cSubject: sub + Sender,
  cMsg: msgBody + "\n\nRegards\n",
  cSubmitAs: "PDF"});
  form1.HR_USE.Hide_HR.presence="visible";
  

• How to make the software application to any user

  Hello, using Win XP.  I have a software that is available when I am connected on the PC, but I want to make it accessible to any user who is connected.  How would I do that?

  Hi JHL1951,

  You can assign permissions to another user account to access these files or folders.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP

  http://support.Microsoft.com/kb/307874

   

  How to make files and folders private in Windows XP so that only you have access to these

  http://support.Microsoft.com/kb/930987

  Let us know if that helps.

• How do USB available old 100CS

  Does anyone know how to make available on a Toshiba Satellite 100CS USB?

  If work adapter PCMCIA Cardbus to USB 2.0 device on that old book?

  Thanx.

  Hello

  in my opinion, this will not work. There are two standards called PC Card (16 bit) und CARDBUS (32 bit). Your Satellite 100CS only supports the PC Card Standard and the problem is that, as I know no USB 2.0 PCMCIA cards are available as USB 2.0 PCMCIA cards use the CARDBUS standard.

  Maybe he knows a seller of a 16-bit card!

  Tanya Bye

• Move public folders to another drive

  I have a new computer with a small disk C: (SSD) and a large drive D: (mechanical transmission). I moved (My Documents, my pictures, my music, etc.), document records all users using the Properties > location > move... Unfortunately, this doesn't seem to work for public folders. I can still go to Properties > location which displays the same message that "You can change where the files are stored in this folder...". "but the path that is displayed is not editable and it is not a move... button. Does anyone know how to move the public folders?

  @Hilmar - all the info that I discovered to date indicate that file Public is not movable. Perhaps, it can be done with a sort of hack to check but if so, I have not found. Instead, I created a new folder in the location I wanted to (in my case, at the disk instead of SSD), manually set the permissions and sharing options and had then my computer users add this folder to their respective libraries. Kind of pain, I know, but it was the only solution that I could find.