HOW TO MAKE THE LETTERS ON MY SCREEN POLICY MORE BIG - TRYING TO READ THE SCREEN BELOW IT BLUE LETTERS ARE TOO LIGHT AND TOO SMALL

Similar Questions

• How can I make the biggest user account icons, they are too small?

  I can barely see the names in the user accounts on the computer. Can I enlarge the icons? It is the screen that appears when you turn on the computer.

  Hi ToniBialek,

  Follow the troubleshooting steps in this thread to adjust the size of the icons for your user account.

  Let is know if this helps.

• my icons and the letters are too small and I do not know how to enlarge

  I tried to use my computer, but the icons and letters are real small for some reason any.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• How to make the changes below

  TCP/IP kernel parameters

  NET.inet.IP.FW.verbose = 1 net.inet.ip.fw.verbose_limit = 65535

  NET.inet.ICMP.icmplim = 1024 net.inet.icmp.drop_redirect = 1

  NET.inet.ICMP.log_redirect = 1 net.inet.ip.redirect = 0 net.inet.ip.sourceroute = 0 net.inet.ip.accept_sourceroute = 0

  NET.inet.ICMP.bmcastecho = 0 net.inet.icmp.maskrepl = 0 net.inet.tcp.delayed_ack = 0 net.inet.ip.forwarding = 0 net.inet.tcp.strict_rfc1948 = 1

  
  

  
  

  Windows domain.
  

  Hello. Are you asking how to set these settings in OS X, or how to find the equivalent settings in Windows?

• How to make the Apache configuration for two different areas

  Hello
  
  I was trying just a few clustering on weblogic workshop. I was facing a problem... Here's the scenario:
  
  I have two clusters:
  
  CLUSTER1: 3 managed servers (server1, server2, serveur3)
  Cluster2: 2managed servers (server4, Server5)
  
  I have two examples of applications I have made on these two clusters i.e on cluster1 app1 and app2 on cluster2.
  
  These two applications are deployed all as I am able to open these browser applications by calling the individual run as server port: http://localhost:7003 / app1.
  
  Now, I have installed an apache server on my laptop and configured the http.conf file.
  
  
  Question: I am not able to call the application of apache. If there is only a single cluster then it works very well and for an application two that a single cluster (application) only works too which port is set in the last.
  
  Here are the contents of my httpd.conf file:
  
  #
  # This is the main Apache HTTP server configuration file. It contains the
  configuration directives # that give the server its instructions.
  # See < URL: http://httpd.apache.org/docs/2.2 > for more information.
  # See especially
  # < URL: http://httpd.apache.org/docs/2.2/mod/directives.html >
  # for an analysis of each configuration directive.
  #
  # Do NOT simply read the instructions here without understanding
  # what they do. They are there only as advice or reminders. If you do not know
  # consult the online documentation. You have been warned.
  #
  # Configuration and logfile names: If the file names that you specify for a lot
  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the
  # server uses this explicit path. If the file names do not start
  # with "/", the value of ServerRoot directive is preceded by - so "logs/foo.log.
  # with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2. 2' will be interpreted by the
  # Server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
  #
  # NOTE: Where file names are specified, you must use forward slashes
  # instead of backslashes (e.g. "c:/apache" instead of "c:\apache").
  # If a drive letter is omitted, the drive on which httpd.exe is located
  # will be used by default. It is recommended that you always provide
  # an explicit drive letter in absolute paths to avoid confusion.
  
  #
  # ServerRoot: The top of the directory under which the server tree
  # configuration, error and the log files are kept.
  #
  # Do not add a bar slash at the end of the directory path. If you point
  # ServerRoot to non-local disk, remember to point the LockFile directive
  # to a local disk. If you want to share the same multiple ServerRoot
  demons of # httpd, you will need to change at least the LockFile and PidFile.
  #
  ServerRoot "C:/Program Files/Apache Software Foundation/Apache2. 2. "
  
  #
  # Listen: Allows you to bind Apache to specific IP addresses and/or
  ports #, instead of the default value. See also the < VirtualHost >
  directive #.
  #
  # Change this to listen on specific IP addresses below for
  # prevent Apache glomming on all related IP addresses.
  #
  #Listen 12.34.56.78:80
  Listen 80
  
  #
  # Dynamic Shared Object (DSO) Support
  #
  # To be able to use the features of a module that was built as a DSO you
  # duty place corresponding 'LoadModule' lines at this location until the
  # the directives that it contained are actually available before their use.
  # Modules statically compiled (those listed by "httpd-l") is not necessary
  # to be responsible here.
  #
  # Example:
  # LoadModule foo_module modules/mod_foo.so
  #
  LoadModule modules/mod_actions.so actions_module
  LoadModule alias_module modules/mod_alias.so
  LoadModule modules/mod_asis.so asis_module
  LoadModule auth_basic_module modules/mod_auth_basic.so
  #LoadModule auth_digest_module modules/mod_auth_digest.so
  #LoadModule authn_alias_module modules/mod_authn_alias.so
  #LoadModule authn_anon_module modules/mod_authn_anon.so
  #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  LoadModule modules/mod_authn_default.so authn_default_module
  LoadModule authn_file_module modules/mod_authn_file.so
  #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  LoadModule modules/mod_authz_default.so authz_default_module
  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
  LoadModule modules/mod_authz_host.so authz_host_module
  #LoadModule authz_owner_module modules/mod_authz_owner.so
  LoadModule modules/mod_authz_user.so authz_user_module
  LoadModule autoindex_module modules/mod_autoindex.so
  #LoadModule cache_module modules/mod_cache.so
  #LoadModule cern_meta_module modules/mod_cern_meta.so
  LoadModule modules/mod_cgi.so cgi_module
  #LoadModule charset_lite_module modules/mod_charset_lite.so
  #LoadModule dav_module modules/mod_dav.so
  #LoadModule dav_fs_module modules/mod_dav_fs.so
  #LoadModule dav_lock_module modules/mod_dav_lock.so
  #LoadModule dbd_module modules/mod_dbd.so
  Modules/mod_deflate.so deflate_module #LoadModule
  LoadModule modules/mod_dir.so dir_module
  #LoadModule disk_cache_module modules/mod_disk_cache.so
  #LoadModule dumpio_module modules/mod_dumpio.so
  LoadModule env_module modules/mod_env.so
  #LoadModule modules/mod_expires.so expires_module
  #LoadModule ext_filter_module modules/mod_ext_filter.so
  #LoadModule file_cache_module modules/mod_file_cache.so
  #LoadModule filter_module modules/mod_filter.so
  #LoadModule modules/mod_headers.so headers_module
  #LoadModule ident_module modules/mod_ident.so
  #LoadModule imagemap_module modules/mod_imagemap.so
  LoadModule modules/mod_include.so include_module
  #LoadModule info_module modules/mod_info.so
  LoadModule modules/mod_isapi.so isapi_module
  #LoadModule ldap_module modules/mod_ldap.so
  #LoadModule logio_module modules/mod_logio.so
  LoadModule log_config_module modules/mod_log_config.so
  #LoadModule log_forensic_module modules/mod_log_forensic.so
  #LoadModule mem_cache_module modules/mod_mem_cache.so
  LoadModule mime_module modules/mod_mime.so
  #LoadModule mime_magic_module modules/mod_mime_magic.so
  LoadModule negotiation_module modules/mod_negotiation.so
  #LoadModule modules/mod_proxy.so proxy_module
  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
  Modules/mod_proxy_http.so proxy_http_module #LoadModule
  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  #LoadModule reqtimeout_module modules/mod_reqtimeout.so
  #LoadModule rewrite_module modules/mod_rewrite.so
  LoadModule setenvif_module modules/mod_setenvif.so
  Modules/mod_speling.so speling_module #LoadModule
  Modules/mod_ssl.so ssl_module #LoadModule
  #LoadModule modules/mod_status.so status_module
  #LoadModule substitute_module modules/mod_substitute.so
  #LoadModule unique_id_module modules/mod_unique_id.so
  #LoadModule userdir_module modules/mod_userdir.so
  #LoadModule usertrack_module modules/mod_usertrack.so
  #LoadModule version_module modules/mod_version.so
  #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  LoadModule modules/mod_wl.so weblogic_module
  
  
  
  * < IfModule mod_weblogic.c > *.
  WebLogicCluster 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7003, 127.0.0.1:7103, 127.0.0.1:7104
  MatchExpression /app1
  * < / IfModule > *.
  * < location /weblogic > *.
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  PathTrim /weblogic
  * < / location >. *
  
  * < IfModule mod_weblogic.c > *.
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  MatchExpression /app2
  * < / IfModule > *.
  * < location /weblogic > *.
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  PathTrim /weblogic
  * < / location >. *
  
  
  < IfModule! mpm_netware_module >
  < IfModule! mpm_winnt_module >
  #
  # If you want httpd to run as a different user or group, you must run
  # httpd as root initially and it will pass.
  #
  # Group / user: the name (or #number) of the user/group to run httpd as.
  # It is generally advisable to create a dedicated and aggregatable for user
  # httpd, as with most system services are running.
  #
  Demon of the user
  Daemon group
  
  < / IfModule >
  < / IfModule >
  
  Server configuration # 'hand '.
  #
  # The directives in this section implement the values used by the 'hand '.
  # Server, which meets all demands that are not managed by a
  definition of # < VirtualHost >. These values also provide defaults for
  # all < VirtualHost > containers you can set later in the file.
  #
  # All these directives may appear inside containers < VirtualHost >,.
  # in which case the value default parameters will be substituted for the
  virtual host of # being defined.
  #
  
  #
  # ServerAdmin: Your address, where problems with the server should be
  # e-mail. This address appears on some generated by the page server, such
  # as error documents. for example [email protected]
  #
  ServerAdmin < adminurl >
  #
  # ServerName gives the name and the port used by the server to identify itself.
  # This can often be determined automatically, but we recommend that you specify
  # explicitly to avoid problems during startup.
  #
  # If your host doesn't have a registered DNS name, enter its IP address here.
  #
  #ServerName < servername >
  # DocumentRoot: The directory you are going to use your
  documents #. By default, all requests are taken from this directory, but
  aliases and symlinks # can be used to point to other locations.
  #
  DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs".
  
  #
  # Each directory that Apache has access can be configured in respect
  # to which services and features are allowed and/or disabled in this
  # Directory (and its subdirectories).
  #
  # Everything first, we configure the 'default' to be a very restrictive of game
  features #.
  #
  < directory / >
  Options FollowSymLinks
  AllowOverride None
  Order deny, allow
  Refuse to all the
  < / Book >
  
  #
  # Note that, from this point forward you must precisely enable
  features special # to be enabled - so if something doesn't work not as
  # you might expect, make sure that you have specifically enabled it
  # below.
  #
  
  #
  # This should be replaced by what you set DocumentRoot.
  #
  < directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs" >
  #
  # Possible values for the Options directive are "None", "All."
  # or any combination of:
  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  #
  # Note that "MultiViews" must be named explicitly -'all Options '.
  # is not give it to you.
  #
  # The Options directive is complex and important. Please see
  # http://httpd.apache.org/docs/2.2/mod/core.html#options
  # For more information.
  #
  Options Indexes FollowSymLinks
  
  #
  # AllowOverride controls what directives may be placed in .htaccess files.
  # It can be 'All', 'None', or any combination of key words:
  # Options FileInfo AuthConfig Limit
  #
  AllowOverride None
  
  #
  # Controls who can get stuff from this server.
  #
  Order allow, deny
  Allow all the
  
  < / Book >
  
  #
  # DirectoryIndex: sets the file Apache will serve if a directory
  # is requested.
  #
  < IfModule dir_module >
  DirectoryIndex index.html
  < / IfModule >
  
  #
  # The following lines prevent the .htaccess and .htpasswd files to be
  # seen by customers of the Web.
  #
  < FilesMatch "^ \.ht" > "".
  Order allow, deny
  Refuse to all the
  Meet all
  < / FilesMatch >
  
  #
  # ErrorLog: The location of the error log file.
  # If you do not specify an ErrorLog directive in a < VirtualHost >
  # container, error messages related to this virtual host will be
  # logged here. If you do define a for a < VirtualHost > error log
  container of #, that host errors will be logged there and not here.
  #
  ErrorLog logs / 'error.log '.
  
  #
  # LogLevel: Control the number of messages in the error_log.
  # Possible values include: debug, info, notice, warn, error, crit,.
  # emerg, alert.
  #
  LogLevel warn
  
  < IfModule log_config_module >
  #
  # The following directives define some nicknames format for use with
  # a directive CustomLog (see below).
  #
  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune
  
  < IfModule logio_module >
  # You must enable mod_logio.c use %I and frequency
  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio
  < / IfModule >
  
  #
  # The location and format of the access (Common Log Format) log file.
  # If you do not have any logfiles access set in a < VirtualHost >
  container of #, they will be saved here. On the other hand, if you the do
  # define per - < VirtualHost > access logfiles, transactions will be
  # logged there and not in this file.
  #
  Common CustomLog "logs/access.log.
  
  #
  # If you prefer a log file of access, agent, and referer information
  # (Combined logfile format) you can use the following directive.
  #
  #CustomLog "logs/access.log' combined
  < / IfModule >
  
  < IfModule alias_module >
  #
  # Redirect: Allows to tell clients the documents used for
  # exist in your server's namespace, but no more. The customer
  # make a new request for the document at its new location.
  # Example:
  # Redirect permanent/foo http:// < url >/bar
  
  #
  # Alias: Maps web paths into paths of file system and is used to
  # access content that don't live under the DocumentRoot directive.
  # Example:
  # Alias /webpath/full/filesystem/path
  #
  # If you include a trailing / on /webpath, then the server will be
  # require that he be present in the URL. It is also likely that
  # duty provide a < Directory > section to allow access to
  # the path to the file system.
  
  #
  # ScriptAlias: This controls which directories contain server scripts.
  # ScriptAliases are essentially the same as assumed names, except that
  # documents in the target directory are treated as applications and
  # executed by the server on demand, rather than as documents sent to the
  client of #. The same regulation on flight "/" applies to the ScriptAlias
  # as for the Alias directives.
  #
  ScriptAlias/cgi-bin / "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/".
  
  < / IfModule >
  
  < IfModule cgid_module >
  #
  # ScriptSock: On threaded servers, refers to the access path to the UNIX
  decision # used to communicate with the CGI mod_cgid daemon.
  #
  Newspapers/cgisock #Scriptsock
  < / IfModule >
  
  #
  # "C:/Program Files / Apache Software Foundation/Apache2.2/cgi-bin" should be replaced by everything that your ScriptAlias
  # CGI directory exists, if you have set up.
  #
  < directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" >
  AllowOverride None
  None of the options
  Order allow, deny
  Allow all the
  < / Book >
  
  #
  # DefaultType: Server default MIME type used for a document
  # If it cannot establish also as file name extensions.
  # If your server contains mainly text or HTML documents, it is "text/plain".
  # a good value. If your content is binary, such as applications
  # or images, you can use "application/octet-stream" instead of
  # Keep browsers try to view binary files, as if they were
  # text.
  #
  DefaultType text/plain
  
  < IfModule mime_module >
  #
  # TypesConfig points to the file containing the list of mappings from
  # MIME file extension - type.
  #
  TypesConfig conf/mime.types
  
  #
  # AddType allows you to add or replace the MIME configuration
  # the file specified in TypesConfig for specific file types.
  #
  #AddType application/x-gzip .tgz
  #
  # AddEncoding allows you to have certain browsers uncompress
  # information on the fly. Note: Not all browsers support this.
  #
  #AddEncoding x-compress. Z
  #AddEncoding x-gzip .gz .tgz
  #
  # If the AddEncoding directives above are commented out, then you
  # should probably define these extensions to indicate media types:
  #
  AddType application/x-compress. Z
  AddType application/x-gzip .gz .tgz
  
  #
  # AddHandler allows you to map certain "manipulators": file extensions
  # No actions associated with the file type. It can be either integrated into the server
  # or added to the directive of the Action (see below)
  #
  # To use CGI outside of ScriptAlias directories scripts:
  # (You will also need to add "ExecCGI" to the "Options" directive.)
  #
  #AddHandler cgi-script .cgi
  
  # For maps of type (negotiated resources):
  #AddHandler type-plan of the var
  
  #
  # Filters allow you to process content before sending it to the client.
  #
  # To parse .shtml for server-side includes (SSI) files:
  # (You will also need to add "Includes" the "Options" directive.)
  #
  #AddType text/html .shtml
  #AddOutputFilter INCLUDES .shtml
  < / IfModule >
  
  #
  # The mod_mime_magic module allows the server to use various boards of the
  content of the file itself to determine its type. The MIMEMagicFile
  # directive tells the module where the definitions of suspicion.
  #
  #MIMEMagicFile conf/magic
  
  #
  # Customizable error responses come in three flavors:
  ((# 1) text 2) local redirects 3) external redirects
  #
  # Examples:
  #Error Document 500 "The server made a boo boo".
  #Error Document 404 Missing.html
  #Error Document 404 "/cgi-bin/missing_handler.pl"
  #Error Document 402 subscription_info.html < url >
  #
  
  #
  # EnableMMAP and EnableSendfile: on systems that support.
  projection in memory # or the sendfile syscall is used to deliver
  # files. Usually, this improves the performance of the server, but must
  # turn off when mounted network is served
  # file systems or if support for these functions is also
  # broken on your system.
  #
  #EnableMMAP off
  #EnableSendfile off
  
  # Additional configuration
  #
  # The configuration files in the conf/extra/directory can be
  # included to add additional features or change the default configuration
  # the server, or you can simply copy their content here and change as
  # necessary.
  
  # Server-pool management (MPM specific)
  #Include conf/extra/httpd-mpm.conf
  
  # Multilingual error messages
  #Include conf/extra/httpd-multilang-errordoc.conf
  
  # Entries to the fancy directory
  #Include conf/extra/httpd-autoindex.conf
  
  # Language settings
  #Include conf/extra/httpd-languages.conf
  
  # User directories
  #Include conf/extra/httpd-userdir.conf
  
  # Info in real time on the applications and configuration
  #Include conf/extra/httpd-info.conf
  
  # Virtual hosts
  #Include conf/extra/httpd-vhosts.conf
  
  # Local access to the manual for the Apache HTTP Server
  #Include conf/extra/httpd-manual.conf
  
  # Distributed authoring and versioning (WebDAV)
  #Include conf/extra/httpd-dav.conf
  
  # Various default settings
  #Include conf/extra/httpd-default.conf
  
  # Secure connections (SSL/TLS)
  #Include conf/extra/httpd-ssl.conf
  #
  # Note: The following text should be present to support
  # start without SSL on platforms without equivalent/dev/random
  but # a statically compiled in mod_ssl.
  #
  < IfModule ssl_module >
  SSLRandomSeed startup builtin
  SSLRandomSeed connect builtin
  < / IfModule >
  
  This is so for the app2 only configuration above, I am able to call and app1 his adage "404 page not found".
  
  Can soomebody help me cofiguring apache so that I can call the two applications.
  
  
  Thank you
  Ankit

  >
  
  WebLogicCluster 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7003, 127.0.0.1:7103, 127.0.0.1:7104
  MatchExpression /app1
  
  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  PathTrim /weblogic
  

  
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  MatchExpression /app2
  
  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  PathTrim /weblogic
  
  >

  This configuration is a little weird. He has /app1 MatchExpression and MatchExpression /app2 and at the same time two sections . Are you sure you understand what means that the configuration?

  Try something like this...

  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  

  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  

  where /app1 and /app2 are your weblogic applications contexts.

  http://download.Oracle.com/docs/CD/E11035_01/WLS100/plugins/Apache.html
  http://httpd.Apache.org/docs/2.0/mod/core.html#location

• How to make the computer to recognize that there are 2 monitors?

  I have a new hp pavilion hpe h8-1124 with AMD Radeon HD 6570 GPU.  It does not have a VGA port, so I used the adapter supplied in the box HP (DVI / VGA).  To get to two monitors, I used a VGA 2 VGA splitter 'Y '.  Both monitors turn on and show the desktop, but when I use the Windows screen resolution (7 professionals), to stretch my office, the choice of two screens are not present.  Using the button detection detects only a single monitor which is names @.  Using 'Identify' places '1' in each monitor.  When that I start with a single monitor, "detect" correctly identifies appointed monitors.

  How can I get the computer to recognize the fact that there are two different monitors?  If I can't do this, I can't do the rest of what I need to stretch the desktop on two monitors.

  Hello

  Get rid of the VGA splitter.  You have noticed it doesn't work for the Office of 'cloning', but do not stretch across two monitors.

  What are the other ports on the video card?  without doubt, DVI, HDMI, and VGA if this is correct, then one of then one of the monitors must use DVI - D or HDMI if you want to continue to use the VGA for the other monitor.

• How to make the menu letters more when you use Lightroom 4?

  How to make the menu letters more when you use Lightroom 4?

  Hey Lenovo W510,.

  The police of interface only option in Lightroom of sizing is in the preferences > Interface > panels > Font Size (Small/Large)

  The configuration in grand and then restarting Lightroom will increase the fonts you see in the signs that describe the functions of LR.

  If you're on Mac or Windows you might also decrease your screen/display resolution that will make everything look bigger on your screen.

  Hope this helps,

  Kind regards

  Pete

• How to make the icons of programs appears on the screen of windows 8

  Hi Thunderlight, you helped me with my last request and thank you again now I have another question that you might be able to help me with.  How to make the icons of programs appears on my screen of windows 8?  I had to download the debut8 when I had windows 8 so I would have the appearance of windows 7 until I have to use Windows 8.  And some of my icons of windows 7 on my windows 8, but not all.  How to go on my windows screen 8 tiles?   I now get more usage of windows 8 and use it more now so would like all my original programs that I had with windows 7 on my windows 8 as it is now tile.  I thank you and hope you can help.

  Hi Laura,

  In theory, when you switch from an earlier version of Windows to Windows 8 - as your installed applications are kept by the upgrade process, except those who are not compatible - you should find all your apps in Windows 8.

  If they all do not appear on your start screen follow these steps to pin them there:

  • [Win] + C
  • Search
  • Click anywhere in the top middle of the screen to hide the charm bar

  All installed applications are displayed. They do not necessarily correspond on a single screen to use the horizontal "lift" to bottom of the screen to move to the right / left

  • Right-click on an application, you want to pin to the start screen
  • Click on Pin to Start at the bottom left of the screen

  You are finished. A mosaic of this application is available on the start screen.

  If there is an application, you are sure is installed on your PC and you don't think through the steps made me know - there will be more complex...

  If you install a new application under Windows 8 the corresponding tile is automatically added to your start screen.

  Hope this helps

  See you soon

  LZ.

• How to make the updates of operating system for the limited user account?

  original title: how to make the updates of operating system for the limited user account?  Limited user account cannot access the Windows Update page, see instead cautioned against MS the most recent must be installed.

  XP Pro SP3 slipstreamed.  New a DBAN nuked HDD installation

  All the OS updates installed from Admin acct before creating the LUA

  AV installed AVAST

  all dot net uninstalled and then reinstalled to resolve a problem installing Quicken

  Updates to auto lit

  Active Windows Firewall

  Three solutions of workaround for Windows XP running as a limited user

  http://blogs.Computerworld.com/16502/three_workarounds_for_running_windows_xp_as_a_limited_user

  Survive a Windows XP Limited user account

  http://techknack.NET/surviving-a-Windows-XP-limited-user-account/

  See the response from Michael Kuntz - re: HAL files

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/e8612ac4-b881-4FB3-85e7-32004932fb5f

  There is an available for installation of SP3 Cd

  Manually installing SP3 using the Microsoft Download Center or a CD

  If you have problems to receive the service pack from Windows Update, you can download SP3 as a standalone package from the Microsoft Download Center Web site, and then install SP3 manually. The installation package is intended for it professionals and developers, but you can always download and install this file.

  You can also order a CD from Microsoft containing SP3. For more information, go to the Microsoft site.

  To manually install SP3 using the standalone package installation or CD

  1. Do one of the following:

     • If you downloaded SP3 from the Web site, to install it immediately, click Open or run and follow the instructions on the screen. To install the program later, click on save and download the file to install it on your computer. When you are ready to install the service pack, double-click the file.

     • If you install SP3 from the Service Pack 3 CD, insert the disc into your computer with your current version of Windows XP running, and Software Update Installation Wizard should appear automatically. If this wizard does not appear, click Start, double-click my computer, click on your CD or DVD drive and then click AutoPlay.

  2. In Windows XP Service Pack 3 page, click Next.

  3. Follow the instructions that appear on your screen.

  4. Once the installation is complete, click Finish to restart your computer.

  5. If you disabled your antivirus software, turn it back on.

• Can you please tell me how to make the thicker arrows on the Pages.

  Can you please tell me how to make the thicker arrows on the Pages. Thank you very much. There is something incredibly simple to do, but I, having a disconcerting brain, am totally unable to understand. Please please help me. Thank you

  < re-titled by host >

  Try here > Pages for Mac: Add and edit forms

• How to make the top sites page appears when I open a new tab? Why have I not of "buttons" to pin a top site of the page tab?

  When I open a new tab, NO best sites don't show up... shows just a search engine box. I have Firefox 33.0. Why is there no 'pin' button when I opened a new page? How to make the top sites page appears when I open a new tab?

  Here is some additional information on the configuration of the new tab page:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered

  (3) double-click the preference browser.newtab.url and enter your favorite page:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Press Ctrl + t to open a new tab and check that it worked. Fixed?

  Some traps:

  If Firefox will not let you change this setting: you can have what is called SearchProtect on your system.

  Firefox if allows you to save your changes, but he doesn't know: one of your extensions may be the substitution of her. You can consult, disable and/or remove extensions on the addons page:

  "3-bar" menu button (or tools) > Add-ons > in the left column click on Extensions

  If the modification works during your session, but during the next startup is leads to: you could have a user.js file in your personal settings Firefox (your Firefox profile folder). This article describes how to track down and delete the file: How to fix preferences that will not save.

  A little luck?

• I have associated my pencil to Apple for the iPad Pro; How to make the Widget of batteries displayed on the notification Center 'today '?

  I have associated my pencil to Apple for the iPad Pro; But how to make the Widget of batteries displayed on the notification Center 'today '?

  See if it works. Scroll to the bottom of the list in the display today. Tap on edit. Press on the + sign next to battery.

• How to make the snow fall go far in the background that I've recently added a newsletter on your part?

  How to make the snow fall go far in the background that I've recently added a newsletter of mozilla to? It appears on things, I feel.

  I can't talk about it. What is an extension?

  You can disable or remove unwanted page extensions modules. Either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. If you don't it spot, perhaps in the appearance section?

• How to make the text bigger in youtube! Cubs in youtube!

  I made the largest text where google search arrives! But when I go on youtube the text is much tinier and I 65 to cataract and I can't read the text at right! How to make the text bigger in youtube? Thank you very much! I tried everything, but nothing changes the size!

  When you view this page hit {Ctrl + 0} < is a zero number -to reset the zoom level for this area.

  https://support.Mozilla.com/en-us/KB/page+zoom

  If you move the scroll wheel, and are now the CTRL key, you can change the zoom level of the page that is viewed - both in & out.

• When I run a web browser immediately loaded two blank tabs. How to make the browser to load the only?

  When I run a web browser immediately loaded two blank tabs. How to make the browser to load the only?

  Have you checked the home page to make sure that if is not the vertical bar (|) symbols?

  See the following for a few suggestions:

  • https://support.Mozilla.org/KB/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
  • https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports several home pages separated by ' |' symbol
  • http://KB.mozillazine.org/Preferences_not_saved