Calibration with the voltage source - float connections

Similar Questions

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• How can Camileo S20B with the external source?

  Hello

  According to a post on this forum I should be able to the S20B using a USB power source by removing the battery.

  I tried and it doesn't work. I removed the battery and plugged the USB cable into a variety of sources including laptops USB power. The blue light is on but the S20B does not supply power to the top.

  Any suggestions? I really need to be able to power the device for more than one charge of the battery.

  Thank you

  I put t know if it will work. Have you checked the user's guides document?

  I tested it with my Camileo H30 and may not work with the connected USB cable but without battery.

  This cable is designed for transfer of data only.

• New computer wants me to combine Skype with the Microsoft account to connect. How should I not do this?

  I have an account to both personal and professional for Skype. I use the business account more. In the process of setting up the account company on my new computer, I asked for the connection information for the Microsoft account. After that, he wants now all merge so I sign in Skyp with connection to Microsoft. I don't want to do that. My business account is actually "owned" by my employer and I want to be able to make sure that everything is separate. How can I work around by using Microsoft information in Skype?

  Thanks for your help!

  Mary Pat

  The only case where Microsoft Account is an absolute requirement is when dealing with the modern app from Skype (metro) for Windows 8/8.1.

  Desktop version, that can be installed on computers Windows 8.1 requires Microsoft account.

  https://support.Skype.com/en/FAQ/FA12162/how-do-i-get-the-desktop-version-of-Skype-Windows-8-or-Abov...

• Problems with the external monitor W540 connection

  Hi, maybe someone can help me. I'm trying to connect a W540 (no external dock) to an external monitor Dell.

  I tried with two monitors, but none work.

  Connected via VGA port on the side of the W540

  (1) connected monitor and clogged up the resolution of the screen on laptop (lines icons tiny, black on each side of the screen). External monitor works fine. When unplugged, it went back to the previous screen resolution.

  (2) laptop registered resolution and icon size of the screen as a profile.

  (3) external monitor connected right click options graphics Intel, insured was custom display, main display plus external monitor, then had to go in a re - click on the name of the saved profile.

  (4) this worked ok until the next day, when turned on laptop and a blue screen. Managed to get this back hard by restarting and completed the steps in N3

  (5) cannot get the Nvidia Control Panel to display anything else than the 3D options, even if it make the default value (instead of the Intel graphic card)

  Can anyone offer some so that I can connect an external monitor without having to go through all this hassle every time? Why this affects the laptop so bad (and also, it runs very slowly after that)

  Running Windows 8 (but with the interface of Windows 7)

  Thank you very much

  Thank you. A quick update, I contacted Lenovo, and they sent the updated bios drivers. I also uninstalled some software Canon MP Navigator and Lenovo EMC Discovery (http://support.lenovo.com/us/en/documents/ht081844?tabName=Solutions). One or all of them seem to have solved the problem, including the slow start.

• With the help of HP connected

  I am very confused.  A few years ago I created my profile on HP so that I can send the documents to my printer. I don't remember what site I used (it was a few years ago, when I had my printer). This works very well and continues to work ok.  I tested it today... sent some documents on my printer from my email account.

  But today I decided to log my HP account connected and when I did I am faced with a page that says that I don't have any connected printers.  Clearly, this is not true.  So I wonder... is there a number of different platforms in connected HP.  I am very intrigued by the fact that my connected account online with HP indicates I have no connected device, and yet I. Anyone can shed some light on this?

  It's the Web page when I log tells me I have no device is connected to my account:

  https://www.hpconnected.com/UK/en

  Another possible cause would be HP retirement Center ePrint.

  In the past, the HP ePrint Center was available, a few years back it was retired and was replaced by connected HP.

  It may happen that during transmission, your account has been changed and then the unit would not appear until re-adeed after transmissions.

  Hope that helps clarify things,

  Shlomi

• Why is it not my wireless network download speed is much slower with the wifi only direct connection?

  When I run a speed test using WIFI download speed is much lower than that when I cnnectfrom the modem direct to my pc.

  Hi CHERYLA106,
   
  WiFi uses the wireless connection, this is normal behavior.
   
  In the wired connection, there is no interference and the signal strength will be good. Therefore, you will find good speed with the wired connection.

• HP Pro Book 430 G2: Problem with the installation of a connection Wi - Di

  
  

  Hello:

  Your laptop must be one of the Intel wireless cards listed in document go2 posted.

  By your own words, you stated that your model has the Realtek RTL8723BE card without wireless/bluetooth, which is absolutely not capable Intel WIDI.

  My laptop was even one of the listed Broadcom cards, and tool updated WIDI reported «this platform does not support the Intel WIDI.»

  I had to change the map for the Intel 7260 dual band Wireless-N card, and subsequently WIDI works beautifully.

  Specifications for other laptops HP indicate that models with the wireless card that your laptop is home to Miracast.

  Realtek article also speaks to them be selected for Miracast.

  http://www.Realtek.com.tw/press/newsViewOne.aspx?NewSID=273&langid=1&PNid=0&PFID=1&level=1

  I don't know a thing about Miracast, so I don't know how you get the laptop to connect using Miracast technology.

  I thought you had to run an Android device for that.

  But you can try until the cows come home, home and WiDi won't work on your noteboook as it is currently configured if it has any other wlan card but an Intel, one.

• With the help of WAP54G connected to BEFSR41

  I have a desktop connected to my BEFSR41 Vista Home Edition. My WAP54G is also connected to the BEFSR41, providing access for two portable Vista Home Edition. All machines have Internet access. The problem is that portable computers cannot access the desktop computer to add desktop for printing printers remotely or map drives. All the machines see through the Vista Network Center link and sharing 'To see the entire map' (which is pretty cool).

  Via ping, the desktop machine can see TWO laptops, by name AND IP address (as well as the WAP54G and BEFSR41).

  However, through ping, portable computers cannot see the office by either its IP address or name. Returns the ping by name: request Ping could not find office-host. Please check the name and try again. Laptops see the router & wireless access point.

  I'm at my wit's end, I tried EVERYTHING imaginable to make it work, but I obviously missed something because it's basic network functionality. The wrinkle is that I recently replaced my BEFSR41 v2 with v4.3. There is either a parameter that is not correct or Linksys omitted a very important element features between versions. The v2 enabled it works without problem.

  Help!

  Joe

  GV & brickmonkey - you were both correct. The Norton 360 firewall was the culprit! I do not understand why it worked with the previous version of the BEFSR41, because I have never changed this setting since installing Norton firewall.

  Let me know if you're ever in Nashville - margaritas are on me!

  Joe

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• FillColor changes in a layer of text with the text Source keyframe?

  Hi all. In ExtendScript, I would like to change the color of text more than once in a model, without transitions. I know it's possible with a moderator, but I want to do in the Source keyframe text so that the model maintains as minimal as possible.

  I know how to change the fillcolor of a textlayer use:

  var TextColorLayer is comp.layer("MyTextLayer").property ("Text") .property ("Source Text");.

  var TextDocument = TextColorLayer.value;

  TextDocument.fillColor = [1,1,1];

  TextColorLayer.setValue (TextDocument);

  Obviously, this next one does not work, but I don't know where to put the fillColor here...

  var TextColorLayer is comp.layer("MyTextLayer").property ("Text") .property ("Source Text");.

  var TextColorAddKeys = [currentTime];

  var TextColorAddValues = [[1,1,1]];

  TextColorLayer.setValuesAtTimes (TextColorAddKeys, TextColorAddValues);

  Hope someone can help out me, otherwise I use the solution of host who also has its advantages.

  I'm not familiar with the host, but this is how you set a keyframe for a property:

  main();
  function main() {
  
    var myComp = app.project.activeItem;
    if (!myComp || !(myComp instanceof CompItem)) {
    alert("Select a Composition first")
    return;
    }
  
    var mylayer = myComp.selectedLayers[0];
    if (!mylayer || !(mylayer instanceof TextLayer)) {
    return
    }
  
    var keyTime = myComp.time;
    var colorValue = [1, 1, 1];
  
    var textProp = mylayer.property("Text").property("Source Text");
    var textDocument = sourceText.value;
    textDocument.fillColor = colorValue;
    textProp.setValueAtTime(keyTime, textDocument)
  }
  

  The following script will add 5 keyframes with different colors.

  main();
  function main() {
  
    var myComp = app.project.activeItem;
    if (!myComp || !(myComp instanceof CompItem)) {
    alert("Select a Composition first")
    return;
    }
  
    var mylayer = myComp.selectedLayers[0];
    if (!mylayer || !(mylayer instanceof TextLayer)) {
    return
    }
  
    var keyTimes = [1, 2, 3, 4, 5];
    var colorValues = [[1, 1, 1], [0.5, 0.5, 0.5], [0.56, 0.12, 0.99], [0.12, 0.1, 0.45], [0.69, 0.21, 0.3]];
  
    var textProp = mylayer.property("Text").property("Source Text");
  
    for (var i = 0, il = keyTimes.length; i < il; i ++) {
    var curTime = keyTimes[i];
    var curValue = colorValues[i];
  
    var textDocument = sourceText.value;
    textDocument.fillColor = curValue;
    textProp.setValueAtTime(curTime, textDocument);
    }
  }
  

• Bug with the tag source formatting STYLE (DW CC 2015)

  The command 'Apply Source Formatting' formats incorrectly the content of the < style > tag. Instead of putting in the form and content of implementation set back as I specified in the tag library, the content and the closing tag will remain embedded to the left, for example:

  < style >

  {body

  background-color: #00005D;

  do-family: Verdana, Arial, without serif.

  }

  < / style >

  The code must be indented manually, which is having little pain, not to mention what to do so defeats the purpose of the command 'apply Source Formatting '.

  I searched the Forum of discussion here, but did not find any help for this problem.

  Is this a known bug that I'll just have to live with, or is it possible I can fix this in the configuration files?

  I think the reason for this is the default mode that CSS is formatted. When you run apply Source Formatting on an external style sheet, all selectors are flush with the left side, even within the questions from the media. The mode CSS formatting is determined by the Format of Code category in preferences (click the CSS button for advanced formatting). However, there is no option to indent the selectors.

  If you want to file a bug/feature request, use the official form: feature request/Bug Report Form

• Problems with the web interface of connection vcenter 5.1

  Guys,

  What don't understand me, I've set up a new virtual appliance version of vcenter test 5.1, I can connect just fine using vsphere client and console, but the web interface refuses to agree with the same identifiers. What is happening with this single sign? I really do not understand.

  You guys could help me please?

  I stumbled upon this same question.  5.1 with the search service is completely different than 5.0, this is why the others are not working.

  Here's what I did to solve the problem.  I turned on the regeneration of SSL certificate:

  1. Navigate to https://[IP]: 5480 and connect
  2. Go to the Admin tab and press the button "Toggle the setting of certification" until activated regeneration 'certificate' displays Yes
  3. Go to the network tab and change the host name.  This will trigger a regeneration of SSL (or you can change the ip address).  I don't know if change 'localhost' to something else helped, but it can't hurt.
  4. Restart the box (restart System tab button.)

  At this point, you can look at the start-up of the machine of vcenter console messages.  You will notice some messages about detection of a new hostname or IP and regenerate a new certificate.  You will see all the services to import it again SSL ceritifcates so.

  At the end of the reset, I was able to connect to the web client to vCenter!

  HTH

• With the help of Adobe Connect to Live Stream an event

  Hello world

  I was hoping to get some suggestions on how we could better use Acrobat Connect Pro for live stream an upcoming event. Every year we organize an event with a live and online audience. Traditionally, we asked our animators to talk into a microphone that is connected to a SOUND system in the room and then a separate microphone connected to a cell phone photos to the top of the audio that come out of the sound system and passes it on to the way to connect. I think there must be a better way to do it (maybe using a mixing console?), but I don't know how it works. Does anyone have any ideas/suggestions?

  Similarly, anyone has any ideas on adding a video stream live? Ideally, I'd like to broadcast a video feed a resolution about 480, but I don't know if it's realistic. Any ideas people perhaps would be greatly appreciated.

  I've produced dozens of events like yours. The best solution is to find some kind of audio output on your SOUND system port. Maybe it's a headphone jack, but it works very well. What connection you can find, get a cable that connects to this port at one end and the other end to fit into your PC/Mac using either micro-dans or USB. You should only configure Flash to watch this entry. The best way to proceed is to run the Audio Wizard of Connect.

• ODI, working with the XML source file

  Hi ODI Experts.
  
  I work in an ODI project for which source is an XML file and the target is Oracle table.
  I am able to reverse engineer the source XML model by placing the XML file on the local DRIVE.
  I created the interface and made the map with the target.
  During execution of the interface, the insert is peroperly happening.
  
  In a real scenario, my XML file should be placed in a local SERVER (and not in the local drives).
  If that I could go back, I've done the JDBC to point to the directory on the server (instead of local disk path).
  
  When I run the interface she inserts the same set of records that have been placed in the previous step, the latest data from file.
  I tried to delete the file in both server and local drive, and the interface is represented.
  Then it was also inserted the same set of data (instead of giving error file not present in the path).
  
  Not sure where it takes the file and insert the data.
  
  Any valuable contribution on this would help a lot.

  I think what is happening here is that ODI retrieves the data stored in the XML schema when running the interface again.

  Try truncating the XML schema before running the interface that loads data into the table, order below, this can be understood as a procedural step before calling the interface.

  B.4.11 TRUNCATION SCHEME
  Clears all data current schema, or .

  TRUNCATE the SCHEMA []

  http://docs.Oracle.com/CD/E17904_01/integrate.1111/e12644/appendix_xml_driver.htm#CHDEEGHJ

  I hope this helps.

  Kind regards
  Rickson Lewis