How to move a folder w / files on USB?

"What are the details?" a folder to USB...
ex... National League of nursing!

Hello

Way the easiest is to put the flash drive in and make sure it works - possibly Windows Explorer
Startup - if not use Start - computer or Windows Explorer.

(Note: do not copy too many files in the root of the Flash Player, this is limited.) Instead
If you have a lot of individual files (or groups of them) put in a folder and subfolders on the
Flash drive. You can copy as many files and folders as needed as long as they are not all in the
root of the flash drive, of the capacity of the drive.) Make a folder on the USB Flash drive-
Right-click in the pane right and NEW.  If you COPY a folder on the drive hard drive then all its
content must also be copied if after you paste them on the flash drive, you need to check.

Copy using Start - computer or Windows Explorer

Right-click on the files or the files (you can select more than one at a time) and COPY them.
Then go to where you want to click on them and right and PASTE. COPY you from HDD
drive such as C: and STICK it on the Flash drive

When you use this method the folders and files exist on the hard drive and flash drive
as copies double until what change you or remove any other.

----------------------

TIP:

In a folder, you can HOLD SHIFT then click on a file or folder in the right pane, then click on the
Finally, in a sequence, and each of them will be highlighted - right click on the highlighted area and
COPY. Go where you want - click right on - PASTE.

To select a group of files or folders not in order, hold DOWN the CTRL key and click on each file or folder
that you want to copy - right click on the highlight and COPY area. Go where you want
Put them - click on - DOUGH.

Two of these tips also work on subfolders or files at the same time.

=============================================================

If you want to keep the reader Flash AND the folders and files on the disk hard drive in sync using
SyncToy 2.1

How to synchronize two folders using SyncToy
http://www.online-tech-tips.com/free-software-downloads/sync-two-folders-Windows/

Downloads: Download details - SyncToy 2.1
http://www.Microsoft.com/Windows/downloads/details.aspx?FamilyId=c26efa36-98E0-4ee9-a7c5-98d0592d8c52

SyncToy - Forum
http://social.Microsoft.com/forums/en-us/SyncToy/threads/

I hope this helps.

Tags: Windows

Similar Questions

  • HOW TO MOVE, COPY, AND DOWNLOAD FILES

    How to move a folder?  Unlike XP
    where you can manage files and folders to any location using the navigation bar on the side I can't find how to do this.
    Therefore, I can't copy something on my desk which is located in the document or image folder.
    I can also get the files on drive G which is my on my camera card reader. Using the card because the computer will not read my camera with the cord. Help please - I've been searching help - no success.

    Open Windows Explorer by clicking on computer, then through the directories until you find the folder that you are eager to move (or if you already - as it is on your desktop, simply follow the following procedures).

    Navigate to the folder you want to move and select a simple left click and then type CTRL-C (copy) and CTRL-X (cut).  Then, go to the location where you want the folder (the parent folder), and then type Ctrl + V (paste) and the file will be either be copied or moved (depending on the option you selected).

    This same process will work with your G-drive (just select the files/folders that you want to copy/move and navigate to the destination location and paste them there).

    I hope this helps.

    Good luck! Lorien - a - MCSE/MCSA/network + / A +.

  • Can you tell me how to move an agreement to file Archive - thanks

    Can you tell me how to move an agreement to file Archive - thanks

    Hello Sharonb93624200,

    You can download the agreement stored in your computer system in the archive folder in the account of E-Sign. From now on, it is not possible to pass a section agreement (Signed or Out for Signature) to the Archive section.

    -Usman

  • How to lock a folder OR file in windows without using the 3rd party software

    How to lock a folder OR file in windows without using any software of the 3 part,.

    Please help me if there is another way to lock.

    Hi kvegesna,

    To lock a folder or file in Windows XP, the only way is to encrypt the file or folder.

    How to encrypt a folder in Windows XP

    http://support.Microsoft.com/kb/308989

    How to remove encryption from a file or a folder in Windows XP

    http://support.Microsoft.com/kb/308993

  • TYPE of file is editable VIDEO CD movie in FOLDER of FILES

    I used MYBO accounts v12 on another computer (Windows XP), saved the file on a USB 'stick'.dat, inserted 'stick' in my computer (Windows Vista) to Explore & found folder THAT VIDEO CD MOVIE TYPE has changed. Any ideas whether or how it can be changed to .dat file? Is it caused by the compatability of computers, versions of Windows or MYBO?

    Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show you how to reset the folder Windows Explorer view settings (which is what I think you wnnt), disable Automatic folder Type discovery and increase the view of the folder cache to have Vista do not forget the display, model settings of file type, size, or position of a specific window for when it was still closed to the location of specific path.

    It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program http://autosizer.en.softonic.com/ to resize them.

    Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

    Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the three prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

    I hope this helps in your situation.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to delete a folder of files on my sidebar to e-mail?

    My screen has a vertical sidebar with the new message, Inbox, drafts, etc, etc. One of the topics on this subject is records, and which is used to thread emails. I know how to add a folder under this heading, but how do I delete a folder? (If I highlight the name of the folder and click on delete, the text is deleted, and I am asked to provide another name, which of course is not what I want.)

    Some files you cannot delete, but to remove it just click with the right button of the mouse on the file and click on remove

  • How to move a folder Favorites of MSN for Internet Explorer

    I need to move all my MSN FOLDERS FAVORITES to INTERNET EXPLORER.  It is easy to move a single Web site, but I can't figure out how to move an entire folder.  Thanks for any help.

    Hello

    It would be best to contact MSN support for help about MSN. We have a dedicated team to help you with such questions.

    How to contact MSN customer service: http://support.microsoft.com/kb/940784

    Hope the information is useful.

  • I want to move the folder Program Files to another hard drive.

    I have Windows 7 installed on a small primary partition on one of the two hard drives, double boot with Windows XP.  My installation of Windows XP is on a smaller primary partition (like Windows 7) and Program Files folder on a separate drive logic in an extended partition, not on the system drive.  I want to make a folder Program Files of Windows 7 on the same logical drive, Program Files and move the Program Files from Windows 7 folder to that partition on the second hard drive.

    Just an update.  I finally managed to move 'Users' on a separate partition, so my installation of Windows 7 now has Windows on a partition, the files program on a logical drive in an extended partition, and users on a separate logic in this extended partition.

    On the Windows partition, there are junctions that point to the logical drive Program Files and the logical drive of users and editing the registry to set these default locations.  Windows updates proceed normally and successfully.  Program facilities smoothly and work as expected.  I'll post my procedures on my site, I hope that in the near future, after that I tested and confirmed their on my other Windows 7 machines.

    Be forewarned, however, that this separation will break the ability to repair/reinstall (upgrade on-site) Windows 7.  It will stop when he sees that Program Files not are not on the system partition.  However, in my particular case, I depend on third-party software disk for backup, Imaging for the loss of this functionality (repair/reinstall) has no real interest for me.  Restore a disk image is much faster.

    There are other methods posted on the net to separate these main divisions of Windows during the installation. My methods are intended to guide differently to an existing facility while retaining all the features.  And once again, as shown in this thread, Microsoft Support seems to discourage that kind of thing.

  • How to move user folder of SSD to HDD Windows7 Pro 64 bit on a unused computer newly built

    I just finished building a new computer based on a Gigabyte GA - Z77N WiFi mini motherboard with a processor i5-3570, 16 GB of memory and a 128 GB SSD OCZ and 3 x WD 2 TB HDD green. I want to keep the operating system, programs on the SSD but unload the user accounts, my music, Documents, videos, data, etc., other readers. Also, I could be persuaded to consider buying Windows8, if that's easier to install, as I didn't buy Windows 7 software again

    Cordially Robert1920

    The safest option is to use the option to set the location of each of the libraries. Although the profile would remain in the C:\Users folder the mylibraryname can be moved.

    Open the users folder (double-click the user name in the upper right of the Start Menu) right-click on each folder and select Properties. With these directories that support this feature, one of the tabs should be the place, he has the opportunity to move the folder. She will also take care of the move for the files in the folder as well as internal links sort in the folder. I have an SSD in my laptop and have used this option to move my library of music 120 GB on the HARD disk. Not all folders in the user profile has this option but the keys don't.

    This is not a complete solution because the hidden AppData folder cannot be done in the same way, and this can become very large. If you use Outlook, you can move the .pst file manually, and if you want to really technical HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList contains the path to the Users directory.

  • How to move the folder my documents?

    Hello:

    I have recently created a new partition on my hard drive (f) and want my libraries to save here. I looked at how to do this and it seems simple, but it won't work. The usual method is to go to properties and select the location tab. However, when I go to properties there is only one tab, where I can't figure out how to move my libraries. Any help would be appreciated.

    Click the Start button and click on your user name list to the top.

    Right-click on the My Documents folder, and then click Properties,

    You should now see a section of the site.

    Change the default save location,

    http://Windows.Microsoft.com/en-us/Windows7/customize-a-library

    http://www.SevenForums.com/tutorials/595-Library-set-save-folder.html

  • How to move the folder 'Liibraries' default 'C' drive "D".

    In Windows 8 default 'Libraries' folder is on drive "C". Is it possible to move this folder (NOTE: not to do another 'Library' folder!) on the "D" drive, so that when starting for example file Explorer, or saving images, music, widow of the first video... that opens is "Libraries" located on the disk "D"?

    Libraries are not located anywhere. Libraries are a collection of references to the files. The files referenced in the libraries have locations.

    You can delete all entries in the library itself: This removes only the entry in the library, not the target folder. But beware: once you are working with an item referenced in the library of your actions are on this point, not on a library reference.

    Go to C:\Users\ and right click on any of the folders below that; select properties then the tab location and change of the location of the folders you want to Windows D. will move all files in the files to the new location.

    You can then include this location in the appropriate (or a new name you choose) library and delete the reference to the old location.

    Saving and opening elements will start with the default location specified for the application you're using. This must be paid for each application.

  • How do you move a folder or file from a data to another store

    I'm NOT talking to move a virtual machine, just a folder as a folder named ISO and a bunch of ISO in the folder for example. You cannot use to migrate it so please don't tell me to right-click the virtual machine and choose migrate.

    Current options

    Of course I can download a folder on my desktop, then re upload the folder on my desktop, but you are looking for something better in the vcenter (web or client) gui or result finally go to Putty and issuance of an order. Not that I don't like not PuTTY, I like it, but I normally have security disabled for orders, so when I want to move some files or folders autour, it's a pain.

    Thank you all for you help.

    Have you already taken a glance options 'Move' the browser data store? BTW, only the vSphere Windows based Client is able to manage folders.

    André

  • How do I change folder and File Permissions?

    I try to delete a folder on my computer and I get a message saying that I need permission to do so.
    Why is this and how can I change it?

    Hello

    Below also works on 32 and 64 bit Vista

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN

    FileAssassin - free
    http://www.Malwarebytes.org/fileassassin.php

    Force delete (cannot delete) closed or in used files or folders with FileASSASSIN
    http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-FileASSASSIN/

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN

    And this - MoveOnBoot

    MoveOnBoot
    http://www.softwarepatch.com/software/MoveOnBoot.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • How to restore my folder of files on a mac cloud creatives? Cannot synchronize.

    I can't synchronize files and the location of the folder option is grayed out in the creative application of cloud, so I can't choose a different folder. It seems that the file has been deleted and then restored now the soft seems to have lost the track of the place where to sync. I tried to reinstall the app creative cloud without success.  Any suggestions on how to restore the link would be appreciated. Captain El OSX running. Thank you.

    Update - I created a new admin account to see if I could make it work - it's - so now the challenge is how to reset my account main existing mac so that it begins to work again - I hope someone knows what files need to be tweaked to get this working.

    Hello

    Please, try the following steps on your main account:

    Kind regards

    Sheena

  • How to move a folder higher account?

    With each account, there is one main folder, with subfolders of Inbox, sent, etc. Move a main folder is at the top?

    Go to page Add-ons add and search manually sort folders. This add on Let's you move the folders.

Maybe you are looking for

  • Using the Mac OS vs dictionary add dictionary for spelling in Firefox

    I have a series of questions related to the dictionary of the BONE and up the definitions of words and spelling. With Safari, I could use command +: to activate the spell checker and loved using it. I have the spell checker works with FireFox via pre

  • Portege M800: The fan is almost always on

    Hello! I have a Portege M800 M105 with Vista 64 bit. The fan is almost always on despite the fact that the temperature of the CPU is about 43 to 46 Grad Celsius and the CPU has nothing to do. I used the program Speedfan (http://www.almico.com/speedfa

  • Portege R100 - does not start from CD player

    I have Toshiba Portege R100. I want to format and start all over again I use killdisk, excellent utility program, normally takes place the disc cd but the machine does not start from cd player, even when it is said in the bios, it says 'error of cabl

  • Store games on Data (E :)?

    Hey I can store games on the DATA(E:)) Drive rather than use the actual memory? because my memory is filled with the music of my sisters and has only 1.01 GB left and does not store Football manager 2009 because he needs 2 GB

  • CQ60: lockout cq60 hp

    Hi I have a lock code on my computer Code to disable System [66331155] can someone help me to unlock it?