How to obfuscate code in Blackbery
Hi, please help me to obscure the code blackberry.
I went through the steps provided the below url
but I'm not understand 5th point go
Sorry no, I'm going with RIM comment that they don't think this is necessary. As the article that you referenced says:
"As a result, Research in Motion® (RIM) does not believe that it is necessary for businesses to obfuscation for their applications on top of the existing obfuscation provided by default for all applications compiled for the BlackBerry platform. In fact, RIM makes no additional obfuscation of its own products today. »
But search the Forum, other people have tried some tools and you should find these if you look around.
Tags: BlackBerry Developers
Similar Questions
-
How to remove Code condition on iwatch after the last update
How to remove Code condition on iWatch after the last update?
Hello
On your iPhone, in the application of the watch, go to: My Watch (tab) > password - tap on disable password.
-
After the upgrade of virus protection, I had no DVD driives. Are there drivers more recent Manager sayss of devices, but code 39 won't allow Vista to install.
Here is an article on how to fix a Code 30 in Vista. http://www.pchell.com/hardware/cd_drive_error_code_39.shtml It is to change the registry, so you must create a restore point http://www.howtogeek.com/howto/windows-vista/create-a-restore-point-for-windows-vistas-system-restore/ AND backup the registry http://www.adamsdvds.co.uk/tutorials/vista/regedit/backup.php until you just start being on the good side because I don't really know much about this procedure or if it will work because it says it does (or what else he can do - maybe something dangerous).
This is perhaps a better article on how to repair Code 30 errors in Vista http://pcsupport.about.com/od/findbyerrormessage/a/code-39-error.htm. I would like to try this one first. The same rules apply to do the restore point and backup before playing with the registry.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How to fix code 39 for cd/dvd-rom readers
How to fix code 39 for cd/dvd-rom readers
Here the answer -
How to migrate code from one environment to another in the MFT 12 c
Hi all
How to migrate code from one environment to another in the MFT 12 c.
Thank you and best regards,
Tilquin.
MFT has t2p plugin that can be used to migrate the metadata for production test.
There is an export option in the transfer page in the MFT UI that can be used to export metadata data transfer.
This exported zip can be imported in any other environment after making the necessary changes.
-
How to properly code for exception management?
Hey you wonderful people you
I have a quesiton on how to correctly code in PL/SQL for exception management. Here is my code below, I was told that how I use in my script of exception handling is simply not true.
Can someone please adjust the section where I use the management of exceptions and show me what is the appropriate way to deal with exceptions.
Here is the table creation script, so you can see what how the script fills the table DYNAMIC_COUNTS.
--------------------------------------------------------------------------------------------------------------------------
CREATE TABLE DYNAMIC_COUNTS
(VARCHAR2 (30 BYTE) "T_OWNER",
VARCHAR2 (30 BYTE) "T_TABLE_NAME."
VARCHAR2 (30 BYTE) "T_COLUMN_NAME."
NUMBER OF 'FND_PATTERNS');
Now, here's the script:
------------------------------------------------------------------------------------------------------------------------
Set serveroutput size unlimited
run the DBMS_OUTPUT. ACTIVATE (buffer_size = > NULL);DECLARE
TYPE nt_tab IS TABLE OF dynamic_counts % ROWTYPE;
v_nttab nt_tab: = nt_tab();
FND_LOOK INTEGER.
v_incr NUMBER: = 0;
------------------------------------------------------------------------------------------------------------------------
BEGIN
FOR t IN (SELECT master, table_name, column_name
From all_tab_columns
Owner WHERE = UPPER ('& SCHEMA_NAME'))
------------------------------------------------------------------------------------------------------------------------
LOOP
BEGIN
EXECUTE IMMEDIATE ' with an ACE (select case when REGEXP_LIKE (' | t.column_name |))
-This search 1 letter and 12 figures-
', "^ ([[: alpha:]] |) [[: alpha:]] ({3}) [0-9] {12} $")
then "match"another "no matches found" end up as output of ' | t.Owner | '.' || t.table_name | ')
Select count (*) in a where a.output = "Match Found" clause '
IN FND_LOOK;
------------------------------------------------------------------------------------------------------------------------
IF FND_LOOK > 0 THENv_incr: = v_incr + 1;
v_nttab. EXTEND;
v_nttab (v_incr) .t_owner: = t.owner;
v_nttab (v_incr) .t_table_name: = t.table_name;
v_nttab (v_incr) .t_column_name: = t.column_name;
v_nttab (v_incr) .fnd_patterns: = FND_LOOK;
END IF;
------------------------------------------------------------------------------------------------------------------------
/ * This is for DBMS output, thus we have 2 different ways, one can see the results in the table dynamic_counts
and in the dbms_output
*/
IF FND_LOOK > 0 THEN
Dbms_output.put_line (t.owner |) '.' || t.table_name | ' ' || t.column_name | ' ' || FND_LOOK);
END IF;
------------------------------------------------------------------------------------------------------------------------/ * Exception handling * /.
EXCEPTIONWHILE OTHERS
THEN
Dbms_output.put_line)
"Generic error".
|| t.column_name
|| "from".
|| t.Owner
|| '.'
|| t.table_name);
END;
END LOOP;
------------------------------------------------------------------------------------------------------------------------
FORALL i IN 1.v_nttab. COUNTY
INSERT INTO dynamic_counts (t_owner,
t_table_name,
t_column_name,
fnd_pattens)
VALUES (v_nttab (i) .t_owner,
v_nttab (i) .t_table_name,
v_nttab (i) .t_column_name,
v_nttab (i) .fnd_patterns);
COMMIT;
END;
/
Isn't there. In the statement in the EXCEPTIONS section dbms_output.
-
How to obfuscate the code in blackberry?
Hello
I want to know is - it possible in blackberry to decompile the source code. If we distribute the application with the files .alx file then what are the chances of him have decompiled. If this is the case, then can someone tell me how to avoid this. I know all obfuscators like Proguard, but is it necessary to use it.
We hope to get an answer soon.
See this article.
-
How can I code colors in my calendar events
Please explain how the events of color in my Thunderbird calendar code, so I can see at a glance which events are on weekends for example or output
http://forums.mozillazine.org/viewtopic.php?f=46 & t = 646124
https://addons.Mozilla.org/en-us/Thunderbird/addon/calendar-tweaks/
-
How change the code of the IDN in the browser?
Q: how to change or ask to change IDN code in an area that uses special characters?
It is not clear what you are trying to accomplish. Y at - it a Web page url that doesn't work for you? If so, what is it? Or you host a site yourself with such a domain name and you have a problem with the way it appears in the browsers?
-
How to reset code restriction without backup
How can I reset my code restriction without backup? But I want to lose al my apps and files (I don't want to reset not everything).
-
How calculated the code coverage in unit test infrastructure
I'm looking for documentation on how the unit test framework calculates code coverage.
I just recently installed the unit test framework and I had mixed results with the code coverage feature. I manually calculated all the branch points in my vi, but the framework calculates more that I can think of, which gives a value of code coverage less than stellar (51%). Is there documentation for how it is calculated? I'm either missing something fundamental, or there is a bug with the framework.
My vi consists of a loop (with shift registers) uninitialized which runs once. On the inside of the loop is a business T/F structure that leads to a listed case structure possible two cases (one of which is the default value)... pretty basic. Inside one of the structures is a loop and the other is cross. For some reason, the unit test framework calculates 7 "flags chart run. I use the method of "external" test harness to call all my test cases for the vi under test, b/c frankly it was easier to use than the UI provided. I don't know if this is the cause, b/c I saw the other oddities when using it, which I'll save for another thread of discussion.
Code coverage is calculated by dividing the number of diagrams, code that was executed by the number of diagrams in your VI altogether. Each VI has at least 1 schema (schema-block real). Loops have a single diagram each, case structures and sequences have a single diagram by image and so forth (=> from your description, your VI has at least 7 diagrams). You can double-click the patterns that were not executed in the Unit Test Framework results dialog box to be displayed.
This approach does not reflect the amount or complexity of the code that contains each diagram. We looked at various ways of counting nodes, terminals, controls, son and other, that would give you a number that reflects your code with more precision. Unfortunately, neither of these approaches gives values that can easily be understood without some knowledge about the inner workings of LabVIEW. We chose to go with a solution that is completely transparent to end users.
Thank you
Herbert
-
How can error code 66A I fix this__
help me solve my computer whenever I try to do my windows updates, I get an error code 66A, how can I fix
See the Srinivas R response to a previous post about the error code:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/31151006-dfd4-4B93-85EC-26ac470df87c >
-
How to enter code Windows 7 product key
When I was installing Windows 7 from a download online (I have no installation disc), when he came to the screen for entering the product key, I didn't because it was in my Inbox of email online, so I clicked past (he lets me do not enter any code). Now, I want to enter my product key (this time I wrote it!). How can I do?
You might be able to do this in Control Panel > System > change product key .
-
Puk how to unlock code BlackBerry Smartphones?
I have BB priv, At & t usim and Skt usim (Korea Wireless Carrier).
BB priv & At & t usim--> OK
-Normal operation is when you use the usim At & t card.
BB priv & Skt usim--> enter unlock code.
-If the unlock code received from the At and t. And enter the code.
but failure 5times.
Priv BB comes out that enter the PUK code.
BB priv & At & t usim. ->, It is still used.
I want to use the skt usim card.
How can I solve it?
If your device is blocked on request a PUK code, you will need to contact your point of sale and exercise of warranty options. Since it's the only thing that can be done when the device is in this State I'll mark this reply as the solution so that others are aware of what needs to be done.
-
How to combine code C++ of Cascade with the native C code in a project?
Purpose: Using C++ Cascade camera video sample with native C sensor log.
and function by using Cascade C++ user interface with native C detection function.
Problem: After putting code of Cascade C++ native code C, the library shows unresolved inclusion.
Question: How do I combine code C++ of Cascade with the native C code in a project?
Minimal code:
#include
#include#include 'printf.h.
#include
#include
#include#include "hellovideocameraapp.hpp".
to: bb::cascades:Application;
int main (void) {app app (argc, argv);
New HelloVideoCameraApp (&app);)
Return app.exec ();
printfhw();
printf ("Hello new %d", hwnum);
Return EXIT_SUCCESS;
}You just add the header and call the function as you would normally call a C in C++ function.
You will need to provide clarification as to what you are trying to accomplish. In its current form it looks like you want to run C code in an application of cascades. You are more that welcome to do so, there is nothing to stop you.
Waterfalls of projects are default C++ projects. You do not even need to use QML and can do everything straight c++.
Cascades IS C++ and C and C++ get along very well, so the answer that was given to us.
We cannot give exmamples because all you need to do is create a new project of cascades in the IDE and it will generate the default files for you who are C++. Just add your headers and other whatnot and start coding.
Maybe you are looking for
-
Cannot install Windows 8 on Satellite L750 - CPU compatibility problem
Why can I not install Windows 8 Preview of consumption on my Toshiba Satellite L750-22 x?I get an error of processor compatibility. Intel i3 M380 2.53 GHz
-
is there a site to download plug-ins in Korea of blackberry?
I want to download the plug-in for Microsoft Visual Studio BlackBerry !
-
What to put in the Pavilion Elite m9280.sc - RAM has? CL? MHz?
I have a Pavilion Elite m9280.sc - has. I want to improve/replace the RAM. HPs Web site say 800 MHz max, Crucial guarantees 1066 MHz max will work on it. (http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=C2A628C3A5CA7304) So, who is? I would also
-
People at the Center to activate Windows, it's like talking to a machine.
Hi all Here to tell you that trying to call winodows activation is a waste of time because people ask over and over and over and over again for a product ID, even though I'm telling them in normal English that I can't give them that because I'm in wi
-
The activation server determined that the specified product key cannot be used.
(windows 7 Professional) product key, I get from MSDN, through my collegethe key has been used first in my office and I've activated, itlater, I formatted my desktop computer and install w7 in my laptop with the above product keyso I find the product