How to open indesign files and close

Similar Questions

• I try tom open a gz file and get an error message: Broken pipe error 32: can someone tell me how to open the files of theses and recover what is in them, in layman's terms please.

  I used a program called by Kivisoft to recover my music files on my hard drive. He recovered their property, but they were in the form of a ZIP file with a gz file. But whenever I tried to open the ZIP file, I get an error message saying broken pipe 32 error. There, someone knows how to open these files and recover music on their part could you explain in simple terms that I'm not good with the user base of coding software. Thank you

  Here are some steps for you: http://www.wikihow.com/Extract-a-Gz-File

  You can start by trying utility GUI Tar to unzip the .gz file

• How to open a pdf and read/print using Microsoft Works file?

  Error message: Works cannot open "C:\Users\Desktop\Zeke's Menu.pdf.  The file may be in use by another application, the file format is not supported by any of the installed converters or the file may be corrupt.

  How to open this file and read/print using Microsoft Works or Notepad or something else?

  You can't with these programs - (there is no same Modules for these programs) - you need another program.  You must download the free Acrobat Reader http://www.adobe.com/products/reader/ allowing you to read and print PDF files (but you will not be able to edit/modify them with this program).

  To edit/change you need another program like free PDF Editor: http://www.freedownloadscenter.com/Business/MS_Office_Add-ins/Free_PDF_Editor.html.  You can also download the free OpenOffice Suite 3.2 http://www.openoffice.org/ which is capable to download and work with PDF files (via the writer program).  The good thing about OpenOffice is that you can then save the file in another format which CAN be read and used by Microsoft Works or Notepad (even though it may look very different without the features of PDF).  OpenOffice is very similar to Microsoft Office and most of the people who do not want to pay for Microsoft Office get OpenOffice instead because it is by far the best alternative (and some say that it is even better - although I don't agree with that).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to open the files .fxm and .fxr with fax windows 7 & scan?

  How to open the files .fxm and .fxr with fax windows 7 & scan?  These faxes have been received when I had Windows XP.

  Hello

  A file with FXR and FXM file extensions is a Document received from WinFax.

  You can open the FXR and FXM file by double clicking on it and let your PC decide which default application should open the file.   If no program opens, the FXR and FXM file, then you have probably an installed application that can view and/or edit FXR and FXM files.

  You can use a Notepad or another text editor to open these files.  Number of files is files read-only, which means little matter file extension, a text editor may be able to view the contents of the file properly.  This may or may not be the case with FXR and FXM files, but it's worth a try.

  How a FXR and FXM files:
  There are two ways to try to convert a file to a different file type:

  a. open the FXR file in its default program and choose to save the file open in another file format.

  b. use a softwarefrom online file conversion to convert these files to another file format.
  
  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you

• The bkf files: How can I now open the file and restore my files under windows 7?

  I did a backup on my old computer using the backup program that is under system tools in windows xp. How can I now open the file and restore my files under windows 7?

  See the Description of the Windows NT backup utility restore utility for Windows 7 and Windows Server 2008 R2

• How to get all the style of paragraphs and their policies of an indesign file and write all the info with info para in a txt file with scripts

  @

  How to get everyone how to get all the style of paragraphs and their policies of an indesign file and write all the info with info para in a txt file with scriptingstyle and their policies of an indesign file and write all the info with info para in a txt file with scripts

  Hello

  Try this,

  var doc = app.activeDocument,
      pstyles = doc.allParagraphStyles,
      report = "";
  for(var i =0;i
  Kind regards
  Cognet
  		   

• How to open a file downloaded microsoft word to macos sierra

  How to open a file downloaded microsoft word to macos sierra

  You should just be able to double-click on it since OS X built a decompression software. But unless you are sure that the source of the MS Word file is safe and secure, be careful, because a typical method of malware distribution is through such files.

• Whenever I try to open or run all I get "Choose the program you want to use to open this file" and by default, Adobe Acrobat

  Whenever I try to open or run all I get - choose the program you want to use to open this file and its default Adobe Acrobat and he always answers this file type is not supported.  I can't open anything on my desktop, tried to reinstall Java, and even in my computer it asks me to choose a program to open it. Help!   I don't know what is happening!

  * original title - try to refresh, to run or install anything whatsoever, and it will not open executable files.*

  Hi LisaPisani,

  (1) did you the latest changes on the computer?

  (2) when was the last time it was working fine?

   

  Method 1

  See the Microsoft article below and try the steps mentioned, check if it helps.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 2

  If the previous step fails then I would suggest that you perform the system restore point when it worked very well and check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• Close programs to prevent the loss of information. Your computer is low on memory. You save files and close programs. Java (TM) Platform SE binary Windows Media Player

  Hello

  I keep getting the following error message, and leterally having my computer off over and over again, even if I added 1 GB of RAM (now 3 total RAM) mor and also added a 8 GB SD card as more power:

  Close programs to prevent the loss of information.  Your computer is low on memory.  You save files and close programs.  Java (TM) Platform SE binary Windows Media Player

  I did research on the various search engines to know that many face the same problem, with a variety of possible solutions, but so far, none work.  We suggest that I go to Regedit and change the permissions of the user and then delete the old files, after I import them.

  Needless to say, I am just a user and have just a bit of technical knowledge.  The local PC repair shop in my town has no idea what to do.  For anyone who has a solution to this problem, help will be greatly appreciated!

  Randy Kline

  First of all, unless you know EXACTLY what you do and WHY you do it. I personally recommend never do anything in regedit. I consider myself a moderate to advanced computer user and a moderate user of windows. And I always stay away from regedit, if I can, because you can seriously screw things if you don't know what you're doing... Although, to be honest most of the settings will not have a devastating drama.

  It seems to me that this is a memory leak in the program, you will get this error message to make sure that your computer will just crash, because if she is running out of RAM... Well it will crash.

  If you have a 2 and a 1 GB for a total of 3 GB, I recommend the upgrade once more and just round up to a nice 4 (this is the most of memory a 32-bit system can handle in total)

  Works of memory in a way that you see really only a few performance jump with memory dual channel, the only way to have that is really striking the rods of same in each slot.

  There isn't really a reason that this happens every time, except that simply your computer is low on MEMORY, when your computer says this means RAM, not disk memory storage area.

  If you clean your computer of the programs you never use and stop using windows media player (itunes is better in my opinion, even if you don't have an ipod), you can see an improvement, but to really isolate the problem, I recommend simply opening your task manager as soon as you start your computer (ctrl + alt + delete usually gives you the option or it opens directly) otherwise you can do start-> RUN taskmgr.exe , OR type taskmgr.exe in the search box and press on enter.

  Then, look at the column of memory as I said it sounds like a program has a leak, and you will see that is because memory will begin at low/normal and then numbers just keep climbing...

  Also, make sure that your computer recognizes all 3 GB or RAM. in Task Manager if you have access to the performance tab, under physical memory must be a thing called Total, 3 GB = 3074. If this is not an option in your reason, you can go under Accessories/System Tools system information (on the start menu). (may take a while to load) but on the home page, you should see something that indicates the amount of TOTAL PHYSICAL MEMORY. You want to read this / 3GB or 3074 MB.

  Hope this helps some!

  I recommend to remove all programs, you are ready to, especially those that you never use. Do a complete uninstall. Then start installing windows clean (download google) just to make sure that the program has been removed. then go start--> run msconfig OR just type msconfig in the search and click on go (I don't know if you're running XP or Vista/7)

  In the msconfig dialog, you should see a section that says startup. Don't forget to remove programs that you do not first. Disable startup programs, you use every DAY. Don't go turn off all if windows needs some process to run, and some processes don't effect anything. But if you're curious, you should be able to google all of startup items and see what it's related to and why you do or that you don't need.

  Good luck! Sorry, I'm everywhere with this response.

• How to open a file with a .bar extension?

  Anyone know how to open a file with the .bar extension. I can't seem to find a way, and I get junk out of the web says that opens the file, but I find myself with toolbars and other things I don't need or want. Any help would be great. Thank you.

  On Sunday, February 12, 2012 21:12:54 + 0000, KevinAmosMDK wrote:

  Anyone know how to open a file with the .bar extension. I can't seem to find a way, and I get junk out of the web says that opens the file, but I find myself with toolbars and other things I don't need or want. Any help would be great. Thank you.

  See http://filext.com/file-extension/bar and note that
  http://FILExt.com/ is a very good place to look for answers to
  questions like this.
  Ken Blake, Microsoft MVP

• How to open a file with the extension .odg using Vista?

  How to open a file with the extension .odg using Vista?

  Hi Defiant503,

  Thank you for visiting the forums of answers.microsoft.com.

  I did some research and a file ending with .odg is an OpenDocument Document OpenOffice/StarOffice (Ver 2) of graphics by Sun Microsystems, Inc.    This means that in order to open this file, you will need this program to open it.  You will not be able to open this file with Vista.

  I hope this information helps.

  Kavita M
  Microsoft Answers Support Engineer
  Visit the Microsoft Answers Feedback Forum site
  and let us know what you think.

• URGENT::opening multiple files - i have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  bbmChatDB of public database;

  public static FileConnection fconnRead = null;
  public static String fileReadData = "";
  public static InputStream is = null;
  data Byte [] = null;
  DataInputStream is = null;

  Here is my code...

  I have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  try {}

  FileConnection fc = Connector.open("file:///store/home/user/documents/BSM/") (FileConnection); "

  If (fc.exists ()) {}

  Enumeration e = fc.list ();

  While (e.hasMoreElements ()) {}

  System.out.println ("files are:" + (String) e.nextElement ());

  play this file
  StringBuffer stringBuff = new StringBuffer();
  try {}
  System.out.println ("opening file")-;
  System.out.println ("file name is:" + (String) e.nextElement ());
  fconnRead = Connector.open("file:///store/home/user/documents/BSM/(String)e.nextElement(),Connector.READ_WRITE) (FileConnection);
  System.out.println ("data length")-;
  If (fconnRead.exists ()) {}
  is = fconnRead.openDataInputStream ();
  data = IOUtilities.streamToBytes (is);
  Ddd = new String string (data);
  fileReadData = ddd.toString ();
  System.out.println ("length of data:" + fileReadData.length ());
  System.out.println ("read data :" + fileReadData);

  }

  } catch (IOException ee) {}
  ee.printStackTrace ();
  System.out.println ("Exception in the read data :")
  + ee.getMessage ());
  }

  }
  }

  } catch (IOException e) {}

  e.printStackTrace ();
  }

  {Finally

  try {}
  If (is! = null) {}
  is. Close();
  }
  System.out.println ("is closed...");
  } catch (IOException e1) {}

  E1. PrintStackTrace();
  }

  If (fconnRead! = null) {}
  try {}
  fconnRead.close ();
  } catch (Exception e) {}
  System.out.println (try ());
  }

  }

  }

  You can recode this treatment so that it uses only:

  e.nextElement ())

  Once a loop iteration.

  Directly at the start saying something like:

  String fileName = e.nextElement ());

  and use fileName everywhere in your loop.

  Also be aware that printStackTrace() will do nothing in your situation, it only works if you catch Throwable.  So make sure you something output all your catches exception and also have a catch (Throwable t) to catch the things you miss, as follows:

  {} catch (Throwable t)

  t.printStackTrace ();

  System.out.println ("Eception exception:" + t.toString ());

  }

  I think your code is thrown an exception and you don't see it.

• How to open any files that are locked

  How to open all files that they are locked and encrypted with a unique key RSA 1024

  Siapgereak

  With the key of course.  Without it, you have a problem.

• How to open .wim file after backup in Windows 8?

  How to open .wim file after backup in Windows 8?   The files were backed up on an external hard drive in the form of .wim files before the 'crash' and 8 re-installed windows.   Now, I can not restore files.   The computer does not recognize the external hard drive when I try to restore through troubleshooting > adv options > System Image recovery.

  Hello

  Same as Windows 7:

  http://support.HP.com/us-en/document/c03056985

  Kind regards.

• How to open zip files that are included with various tutorials?

  How to open zip files that are included with various tutorials?  Everytime I try I get the message, "It seems that the file has been moved or renamed."  I am a total novice with this stuff!  Thanks for your help.

  On Windows? Right-click on the .zip file that you want to unpack (unzip) and click on "Extract all" from the context menu.