How to open my computer and how to access local drives, opening files with voice command

Similar Questions

• I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

  I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

  You have been discharged into a temporary user account. It may be a glitch, or your user account may be damaged. First try a system restore when things worked. If it suits it, fine. If it is not then your account is damaged and the best thing to do is to create a new user account and copy your data from the old to the new. I would also like to do a Chkdsk and then some hardware diagnostics on the hard drive and RAM to make sure that the material is solid.

  CHKDSK - click here to open the computer. Right click on the hard drive you want to check, and then click Properties. Click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  Click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will be prompted, see the disk check for the next time you restart your computer.

  Hardware tests - http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  Corrupt user account - if your single administrative user account is damaged (and therefore have what one user account is A Bad Thing), you must log on to the built-in Administrator (disabled by default in Vista) account. From there, you can create a new user account for yourself. In these cases, I prefer not to copy the whole profile to a new way to do not copy the bits corrupt. I prefer a new user account to copy the data (documents, photos, emails, etc.). Here are the instructions to do this. I assumed that you had only an administrative account, then you might want to take a look at the "general recommendations for setting Up user accounts in Vista" at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  Activation of the built-in administrator.

  Method 1. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  If you do not have a Vista installation DVD, you can either make a bootable DVD of Vista repair in the file at this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD.

  After net user, remove the bootable CD and restart the computer. You will now see an icon for administrator on the Welcome screen. Connect to this account.

  Method 2. Or you can use NTpassword to enable the built-in administrator. In both methods, you need third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the .iso image image file, not in the form of data.

  http://home.eunet.no/pnordahl/ntpasswd/

  B. create a new user account for yourself and by copying data from your damaged to her user account

  1. you are now connected to the built-in Administrator account. Go to control panel > user accounts and create a new Standard user for your daily work. Let's call it "Sheldon" for this example. Also create an administrator user, called 'CompAdmin' (or 'Tech' or similar).

  4 Ouvrezunesession 'Sheldon' once for profile files are created. Now log off 'Sheldon' and 'CompAdmin '. In "CompAdmin", disable the built-in security administrator. Do this from a command prompt:

  Start > Search > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator". Provide the password/OK to the UAC prompt. Now, you will get the command prompt. Type:

  NET user administrator / active: No. [Enter] and exit the command prompt.

  5. always in 'CompAdmin', you want to open two windows explore side by side. Open computer and navigate to C:\Users\old-corrupted-account. Now, do that again, but navigate to C:\Users\Sheldon. Copy the data from 'old-corrupted-account' on records in 'Sheldon '. Remember your Favorites, bookmarks (if you use Firefox) and by e-mail if you use an email like Windows Mail client.

  6. When you are finished, log in to "Sheldon. All your stuff should be there. When you are sure to have what you need, you can remove the old man-corrupted-account control panel > user accounts.

  General C. recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• I recently had a virus on my computer and my security system suggested that several files. I think I maybe deleted some files wrong because now I can open only some files.

  I recently had a virus on my computer and my security system suggested that several files. I think I maybe deleted some files wrong because now I can open only some files. I tried to restore my computer to factory settings, but it won't let me open the system restore. I also have an installation disc, but it does not work either. What can I do to get those files or restore to the factory settings? any help would be appreciated

  original title: help!

  Hi AndrewThomas 924,

  Please see the thread following SpiritX troubleshooting for XP:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/how-can-i-remove-fake-Ms-removal-tool-on-Win-XP/35a66f81-7064-E011-8dfc-68b599b31bf5

  I hope this helps!

• How can I play flac Audio files with extension on windows media player

  How can I play flac Audio files with extension on windows media player

  Hello jesskenneth,

  Thank you for visiting the Microsoft answers Site.

  The extension Flac is not a type of supported Windows Media Player file. However, you can user your favorite search engine to search for a solution that can convert the file in a supported file type Windows Media Player.

  For more information on the types of files supported by Windows Media Player, you can also view the following link:

  Information on the types of media files that supports Windows Media Player

  Thank you

   

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio F20-155: how to use BT to share files with the mobile phone

  Hello
  I HAVE TOSHIBA QOSMIO F20-155, BUT I DON'T NO HOW TO USE BLUETOOTH TO SHARE FILES WITH MY CELL PHONE
  PLEASE HELP ME

  Hello

  First a simple question: are you sure that your laptop supports Bluetooth?
  AFAIK the Qosmio F20-155 was delivered without the BT module.

  In addition, if you are not sure if the phone has BT then you can check the bottom of the unit. It should be placed a label BT if the Bluetooth has been installed.

• Why some items in 'Open an existing project' have just the name of the project and others have access to the entire file path?

  I have SP1 2012 LabVIEW and on the main screne of LabVIEW selecrt "show projects".

  Why some elements of 'Existing Open' (project) have just the name of the project and others have access to the entire file path?

  Examples of two lines in the list of projects.

  Ping.lvproj (with a path: C:\Users\mlevine\Documents\MPCE EQT\EQT Software\Ping.lvproj)

  C:\Users\mlevine\Documents\Common package Mission trainer (CMPT) \SUW Surface Warfare\Weapon permission Panel (WAP) \WAP LabVIEW Software\WAP fire authorization server 28 April 2015

  No chance, it's because I made a copy of this software and stored on a network drive power off and it went out of this network drive?

  So if LabVIEW sees two or more versions of the same software, he decides to use the name to differentiate between full path?

  I'd still rather it shows just the name of the project and if you hover over the name it shows the full path.

  Thank you

  Mark

  If you have opened a project of the same name from a different location, it is when it shows the full path both - in this case showing just the name of the project would not help because it would be the same thing!

• I want to format my computer and reinstall XP, but my drive has upgrade on it that I can install XP with it?

  I want to format my computer and reinstall XP, but my drive has upgrade on it I can install XP from scratch with it?

  Unfortunately, no.

• Hoax call on notifications about a virus tries to hijack your computer and ask for help to remove the files?

  OT: security.

  Dear community,

  Did anyone out there contacted by "windows" say you they receive notifications about a virus tries to hijack your computer and ask for help to remove the files? Initially, it was an area code 855, but now the number is unavailable. I get a lot of calls.

  any help would be appreciated

  Thank you

  Hello

  It's a scam.

  Here are the tips that we regularly give the posters who receive these types of calls:

  We have all the errors and warnings in our Event Viewer

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You are the only person who knows if you gave them remote access.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  See you soon.

• All Acrobat readers can open files with pages of mixed orientation (portrait and landscape)?

  All Acrobat readers can open files with pages of mixed orientation (portrait and landscape)? If this is not the case, what versions can? Thank you!

  Hi Sami,

  You can open files whose orientation of the mixed pages in all Adobe readers there is no constraint on the opening of the files with a different page orientation in Adobe readers.

  In case if you have any other question please let us know. We will be happy to help you.

  Kind regards

  Nicos

• I own a windows computer and now a mac can also install LR5 with the same serial number on both?

  I own a windows computer and now a mac can also install LR5 with the same serial number on two computers?

  I'm not sure but based on the selections of purchase stating you can buy for Mac and Windows for equal opportunities of purchase you are able to install and activate on two different platforms using the same serial number.  I know that this is the case with the purchases of items but Lightroom does not seem to come as often.

• I can not open files with PS Elements9 (Mac) NAVE and conducted just every success. updates

  I can not open files with PS Elements9 (Mac) NAVE and conducted just every success. updates.  What should do?

  For the D600 NAVE, you have two options:

  (1) upgrade to PES 11. (2) DOWNLOAD and install the free Adobe DNG converter to convert your raw files to the universal Raw format files and Adobe will open in all versions of PSE (keep your originals as backups and for uses in the software of the camera factory)

  Windows download Click DNG Converter 7.3

  Mac download click DNG Converter 7.3

  You can convert an entire folder of images raw with a single click. See this quick video tutorial:

  You Tube click here for the DNG Converter tutorial

• Help! Need a script to automatically open files with the same name but in another location.

  Good morning friends,

  So for my work, I need a script to open files with the same name but located in a different folder. But since I'm a total noob when it comes to programming, I can't understand how do. That's what I have in mind:

  -J' I manually open an image.

  -The script will look for a file with the same name in another folder that I've specified.

  -The script will then select the channel CMYK of the second file and copy and paste it into the first file.

  -The second file is then closed without saving the changes.

  I have problems with the part where the script searches for a file with the same name as the opened file. I would really appreciate help. Thanks in advance.

  If (app.documents.length > 0) {}

  myDocument var = app.activeDocument;

  var Nomdoc = myDocument.name;

  try {var basename = docName.match (/(.*)-.)} [ ^\.] +$/)[1]}

  catch (e) {var basename = thedoc.name};

  var path = / * path of folder to insert as a string here * / + ' / ' + base name + / * insert file extension, including the period as a string here * /;

  If (queue (path) .exists == true) {var otherDocument = app.open (File (path))};

  };

• I upgraded my computer and replaced by a SATA drive, so I had to reinstall my Windows 7 Professional. But now, it won't activate it.

  He tells me I have counterfeit software, but I did not. I bought this Windows 7 Professional, a year or two ago, I have all the original packaging and discs here in front of me. I've been using this program since I got it. Why doesn't it let me activate?     Please help me

  Try to activate Windows 7 manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Problem opening files with Mac OS Mavericks and elements

  I recently installed Mac OS 10.9.x Mavericks.  Since then, I've had problems opening files in 11 elements.  I upgraded to 12 items, blindly hoping the problem fixed itself, however it does not.   When I try to open a file from the Finder window appears then disappears immediately.  Occasionally, it will remain open until I scroll down to the bottom, but then closes.   I keep files on an external drive, but the drive work with other applications, so I don't think it's that.  If anyone has had a similar problem and has ideas, I would be grateful that the program is unusable at the moment.  Thank you very much anticipation in

  It is extremely important to remove update preferences to the Mavericks:

  http://barbarabrundage.com/2013/10/28/Photoshop-elements-and-OS-x-Mavericks/

  You want to find:

  com.adobe.PhotoshopElements.plist

  Paths in Adobe Photoshop Elements (version number)

  Settings for Adobe Photoshop Elements (version number)

  The link shows you how to find the library user in 10.9. While you're in there go to the Saved Application States folder and delete any for PSE.

  In addition, if you have a wacom, it is crucial to update the released pilot the other day.

• How to block the registration of files with a windows xp-specific extension

  How to block the registration of files in windows xp with a specific extension, example the user cannot save a file with the extension exe or mp3 or another, as management on the filtering of files, windows 2003 server, I can't find the steps for the blocking process I mean in windows xp prof

  Windows cannot do natively.  A file name is simply a file name and you can not prevent the registration of a file based on its extension.

  You can change file associations, such as a double click on a file with a particular extension will not automatically launch an application given, however, but that's not what you asked.
  You may also schedule a program to run from time to time which will erase all files with a given as well.  but until this program is executed, such a file might exist on your disk.

  HTH,
  JW