How to open the Options dialog box to display the curves on the properties panel

Similar Questions

• How to open a modal dialog box of click of a button on the Panel?

  Hi all

  I tried to open a modal dialog box on the click of a button on the Panel the other day. But failed. I managed to have a panel appear on click of a button. But the Group appeared at the forefront of the parent panel. I don't want to. Here are some screenshots of what I managed to do and what I want to do.

  This Panel will appear on the click on the button "Click." Note that the child Panel cannot be moved outside the bounds of the parent panel.

  

  Instead, I want the behavior of the child Panel as shown below. As the modal dialog box that appears when we create a new action game in the Actions Panel.

  

  This Panel can be moved all around the application window. Kindly guide my way through from there to achieve.

  Thank you!

  Post edited by: poortip87

  You can open a modal secondary window like this:

  var w: Window = new Window(); A mx:Window, or your own subclass

  w.type = CSXSWindowTypes.MODAL_DIALOG; in the package com.adobe.csxs.types

  w.Open ();

  There are up to four types of different windows that you can open in the form of secondary windows, although not all are currently available in all products.

  HTH

  David.

• How to: open the control panel and check if Windows Update settings in Windows 8

  If you're running Windows 8 and you are not sure if you get the latest updates and patches Windows updates then the following video should help. It guides you through opening the control panel and how to check your Windows Update settings.

  Remember, make sure that Windows 8 is up-to-date on your computer, you must have the latest updates of Windows installed.

  You may also need to make sure that your computer is updated the software and drivers for your hardware or to trobleshooting purposes make sure it isn't updated drivers for your hardware. Here is a video that will show you how.

  I hope everyone finds these helpful videos. If you have any questions leave a message below. Remember, it is advisable to have the active Windows updates, however, there are certain circumstances (for example, troubleshooting) disable it temporarily is a good idea.

• How to get the properties panel to display at the bottom of the page in dreamweaver CC

  

  where can I find the properties that remain at the bottom of the page, please help

  Press CTRL + F3

• How to use the properties bar to select the highlight color options?

  I saw on a forum how to open the properties bar that provides easier access to switch between the different colors of highlighting.  I managed to do it once, but now the property bar just says no: "no current selection.  How to pull up the other highlighting options?

  I use Adobe Acrobat Reader DC

  2015 release Version 2015.009.20077

  Hi Travis,

  Try opening the pdf again once-> select highlight text and press "CTRL + E" to open the properties bar.

  This helps?

  Kind regards

  Rahul Tyagi

• Performance Options dialog box opens automatically at startup

  Since I've upgraded to Windows 7, the performance Options dialog box opens every time that I reboot.  He seems to be indicating that I have no file exchange of value.  I edited this dialog box in every way that I can think - choose to automatically manage paging file size, defining a custom format, etc. and changes I made seem to be accepted.  However, the next time that I reboot, it becomes the performance Options dialog box.  Help!

  Let me mention that I posted this question a couple of days but I received no answer. I searched the forum for my question and did not find it therefore assumed it was not posted. Sorry if this is a duplicate.

  Hi Sgmellen,

  Welcome to the Microsoft answers site.

  This could be a problem if advanced security file [AFS] also known as the Andrew File System option is enabled on the computer, disabling this option help you solve the problem.

  Follow the steps to disable the option below:
  1. click on Start.
  2 type CMD.exe in the search to start.
  3. right click the command prompt.
  4. click on run as administrator.
  5. type the following command: sc config afs start = disabled [Note that there is no space after the start, but there is a after =].

  Now, restart the computer and check if the paging files mentioned above always appears at startup or not.

  For a similar question, see the link: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/ec146153-6439-4d09-be00-1798990e6d2f
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/992de6a8-bec2-4E74-b6d9-d418a7f5cda0
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/a9f64720-4D54-4D88-b96a-213397097db1

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to open the dialog Ctrl + Tab of a script? (I want to assign to a move of the mouse)

  How to open the dialog Ctrl + Tab of a script? (I want to assign to a move of the mouse)

  Do you mean Ctrl Tab (browser.ctrlTab.previews) Preview or browser: ShowAllTabs (allTabs.open ()); command or something else?

• My question is how to open the system advanced settings in window 7 64-bit home preuim

  My question is how to open the system advanced settings in window 7 64-bit home preuim

  Hello

  Assuming you mean the Windows Advanced System Settings screen, then right click on my computer and choose Properties.  On the left side of the screen, you will see a link for the advanced system settings.

  You can also call directly my pressing the windows and R key (which will bring up the Run dialog box) and typing in control sysdm.cpl

  I would like to know how you, or if you want to say something else.

  Good luck & enjoy Windows 7
  Jon

  If this message was useful and allowed, please consider the vote and it offers as a response...

  My Blog - www.insidetheregistry.com

• 5.5 Audio Options dialog box import Captivate does

  5.5 audio Importing Captivate, I normally get the Audio Import Options dialog box to choose how to set the audio. There are 3 choices and Iwant to use the other, "distribute the audio file across multiple slides. On another system, the dialog box does not appear and the audio is imported to a default location. I suspect that at somepoint, the box "Don't show me again" was checked. How can I get the upcoming Audio Import Options dialog box again when importing audio? I love using the option "distribute the audio file across multiple slides! Is there another way to go directly to the option "distribute the audio file across multiple slides? Thanks in advance,

  Richard P.

  Hi Richard.  I thought I knew that the answer to that, but now I'm not sure.  I have two 5.5 and 6 installed on my PC.  What I will suggest works in version 6, but I couldn't make it work in 5.5.  You may have more luck.

  Go to edit, preferences, General settings.  Click the button for the Confirmation Messages.  One of the boxes is Split Audio.  It is my understanding that if you select this option, Captivate should ask you what you want to do with audio.

  As I said, it works in 6.  Give it a shot and see if it works for you.

  I hope this helps.

  Bob

  Note: I got it to work also in 5.5.  I didn't have a future slide to divide. (duh!).  Once I added a second slide, I had the choice to divide the audio or to extend the timeline.  So, make sure that you have also a following or slides that Captivate can split audio.

  Bob

• How to open the case or take the panels on a desktop HP A6202

  How to open the case or take the panels on a desktop HP A6202

  Just a manual for the love of God or an image. Now I searched the Net for an hour - no luck

  See this guide HP titled "opening the box" for instructions on how to open the case. Be aware that there are several "HP a6202" computers and your may be different than what I have listed. Please provide the full name of the HP model and/or the product name of the computer in question during a request for assistance.

• "MB Ethernet Slave Demon.vi" connection lost when opening a windows dialog box in my application

  Hello everyone,

  I am currently working on a LabVIEW application that communicates with a PLC using a Modbus Protocol (with an ethernet cable). The PLC is the master and the PC is the slave.

  The code is based on the Modbus of LabVIEW examples: "MB Ethernet example Master.vi, MB Ethernet example Slave.vi and MB Ethernet slave Demon.vi. It is not the first time I use it.

  But I recently discovered a problem. In my application, I have a pop-up with a button that opens a windows dialog box to select a result file.

  When the windows dialog box opens, the "MB Ethernet Slave Demon.vi" crashes (I put a meter inside to see what happened and it stops at the moment opens the dialog box), then when I close the dialog box, the counter continues to count, the connection ID is empty, and the number of the demon slave VI connection resets to 0. When communication is re-established between the PC and PLC (like 10 seconds after the closure of the dialog box), the number of connection go to 1 and table of login ID is no longer empty.

  Otherwise, the communication works very well. But not when the dialog box opens and is a significant problem for me because the user must be able to open results file during production that needs the Modbus communication at work because it's the controller who gives orders the computer to run the production cycle.

  Thanks in advance for your help.

  If you think that the problem is inside the library NI Modbus (old), why don't you use the most recent which is available on the network of tools? Link is here: https://decibel.ni.com/content/docs/DOC-30140

  Looking into some of the screws in the library, she uses methods of Server VI as "Run a VI" that will perform the loop of the root, as it crashes while the file dialog is open. I suspect that the new version of the library is not the problem.

• try to open the Control Panel, a statistics box "this file has no program associated with it for performing this action.

  When I try to open the control panel a stats of dialog "this file has no program associated with it for performing this action. Create an association in the creation of an association in set Association Control Panel. "How to do that when I can't the mother lode, the program control panel? Thus the program Windows Fix It; t fix it.

  Hi ChuckCase,

  1. don't you make changes to the computer before the issue occur?
  2. what program of fixit of windows are you running?
  3. what happens when you try to open Control Panel?
  4. do you get an error message?

  Method 1
  I suggest you try the steps from the following link:

  Icons do not appear in the Control Panel, or you cannot start Control Panel, the Welcome Center, or games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  Method 2
  I suggest you to scan SFC.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• How to open the NAT for a Linksys 160N with a WRT54G2 wireless ethernet bridge?

  Hello, I have a Linksys 160N2 router, and I hooked a version w / updated router Linksys WRT54G2 {v24 sp1} DD - WRT.  It worked great, but now my sons xBox 360 States that the NAT is moderate and should be opened.  I don't know how to open the NAT.  Any help will be greatly appreciated.

  This do-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...

  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  3) click on Setup and change the size of the MTU to 1452 and click on save settings... Click the status tab, and take note of DNS1 and DNS2 address...

  (4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...

  (6) turn off your modem, router and Xbox... Wait a minute...

  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

• Need help - how to open the 2007wfp cover? Monitor has intermittent problem with vertical sync.

  To open the lid of my 2007wfp monitor I removed the 4 screws located on the site where the monitor gets attached to the bar, but the cover will come off the coast. There must be some tighten hidden somewhere, which I couldn't find.

  Does anyone know how to open the box?

  Is there a manual to repair available somewhere?

  Any help is greatly appreciated!

  Message edited by HEW399 on 03/28/2008 19:42
  
  

• How to open the photos in adobe bridge in lightroom cc?

  How to open the photos in adobe bridge in lightroom cc?

  You import these images in LR. LR is not a file as Bridge Manager. You must first import pictures into LR for them is displayed.

  Bridge displays all drives on your system, like Windows/Explorer in Windows or on Mac Finder. The only drives and folders that appear in the LR library module are those that you imported images.

  IIRC, you can drag images from the window of bridge to the LR or in the LR window icon and which should open in LR import dialog window.