How to open the case or take the panels on a desktop HP A6202

How to open the case or take the panels on a desktop HP A6202

Just a manual for the love of God or an image. Now I searched the Net for an hour - no luck

See this guide HP titled "opening the box" for instructions on how to open the case. Be aware that there are several "HP a6202" computers and your may be different than what I have listed. Please provide the full name of the HP model and/or the product name of the computer in question during a request for assistance.

Tags: HP Desktops

Similar Questions

  • How to open the Panel styles css

    How to open the Panel styles css in dreamweaver cc 2014. I looked at other ways to do like go to the window, then the css styles, but he's not here.

    Help, please. Thank you

    In 2014 the CC, it should always be available by opening the window designer CSS > CSS designer to hit Ctrl + Alt + Shift + P and then however it probably isn't as fully functional Panel such as DWCS6.

    He has also removed completely new versions of the program and replaced with CSS designer.

  • How to open the Panel rear Dell Precision M4600

    I want to open the back of the Dell Precision M4600 Panel so that I can increase the RAM and also put in a secondary hard drive. There is no documentation or a tutorial for that. Anyone can provide and guide on how to do it? I can't remove the battery, but here I'm lost. I see 2 screws on the back rear panel, but I don't know if it's the right screw to remove.

    Any help is appreciated.

    EDIT: Found the manual!

    ADMIN NOTE: broken link has been removed from this post by Dell >

    To add to the post of urlnotfound:

    Remove the two screws under the battery holding the lid.

    Slide, sometimes with a bit of force, the cover backward toward the back of the laptop.  Only, he moves about 1/4 "and is free to raise at this time here.

    Note that there is only a single 2.5 "HDD place, and it's the hot-swapable one you see on the side (still to figure out how to remove it, level didn't seem to do anything - for the moment).  "2nd HARD drive" is actually a dedicated slot 'mSATA', which means minicards SATA.  It's a tiny, as the three PCI-express slot you see when you remove the cover.  They are very rare to buy the property.  I really wish that I bought a Dell offered, aftermarket cause they are next to the non-existent.  I found only 2 manufacturers, which are the same brands under the hood.  But they are only the size of 50mm.  I want a site of 70mm slit in the WWLAN PCI-Express slot, cause those are available up to 240 GB.

    And FYI, devices with SATA II interfaces mSATA can get up to 240 to 250 MB/s read/write!  No, there are no mSATA SATA III that I could find.  Wanted for a month for them...

    Note also that only two senior RAM sticks are available here.  I'm about to call Dell support for where are the othe two DIMM slots (very probably have to remove the background map).

  • How to open the Panel of render 3D PS CS6 settings?

    Hi all;

    PLS, take a look here:

    http://helpx.Adobe.com/NL/Photoshop/using/3D-Panel-settings-Photoshop-extended.html

    Its the lower panel, I mean, where the tools are found in CS5 are in the Toolbox.

    Thank you

    Maarten

    Say that you are a donut.

    Open the 3D Donut Panel material and select.

    Open the new properties panel (I guess that's what his calles in English) and yu are.

    Maarten

  • How to open the Panel back of the Z1110?

    Electric and all cables

    monitor soft towel of refuge,

    stand out with each 3 screws,

    found a lower screw, behind an open box.

    I do not see more... How to do more?

    Need to enlarge the RAM

    Open other AIO AYC-606 for same RAM and SDS, had only this snaps autour. But here appears to be different.

    A Page found acer here can show the case are missing images.

    Hello

    I guess you have a Z1100 Aspire:

    1. Back cover separated from the upper right corner (B).
    2. Move along the edge of the back cover in a counterclockwise until cover is separate from the flange.
    3. Lift rear cover (C) up to that slot machines (D) are clear of the motherboard connectors, as shown in.
      Be careful when you lift or remove the rear cover to prevent damage to the TV tuner connector.
    4. Remove the back cover.

  • How to open the case of a 15-g020ca hp?

    How to open the case of a 15-g020ca hp? I would like to replace the hard drive. The screws in the back seem to do nothing. It appears no release (or torque) seems them to have no effect on anything.

    Hello:

    Here is the link to the service manual for your laptop.

    http://h10032.www1.HP.com/CTG/manual/c04162986.PDF

    Read the applicable removal procedures section parts and replacement.

  • DV7 - 3067cl, how to open the case and clean the fan?

    Where to find a manual that shows you how to open the case to clean the fan?

    Thank you!

    Hello

    It is not easier to do component, but the procedure is detailed from on Page 94 of your & Maintenance Guide.

    Kind regards

    DP - K

  • How to open the case of a HP Pavilion a1657c

    The fan of my graphics (nVidia) is extremely low. I read on the internet that some blowing dust out of the inside of the Tower will help this problem. The thing is, I can't get the thing open dang. I removed a few screws, but there is a kind of ring in the way and I can't find out how to remove or bypass it. Is there anyone who knows full instructions on how to open the case?

    ThelielFK wrote: my (nVidia) graphics card fan is extremely low. I read on the internet that some blowing dust out of the inside of the Tower will help this problem. The thing is, I can't get the thing open dang. I removed a few screws, but there is a kind of ring in the way and I can't find out how to remove or bypass it. Is there anyone who knows full instructions on how to open the case?

    Hello ThelielFK, here is the link that has information on how to access the system by removing the side panel.

  • How to open the mobile firefox error console?

    Hello! I developed a Web site for android devices, and for my case Firefox exceeds all other browsers. But the problem is that I don't know how to open the error console, which is absolutely necessary for a developer.

    I've seen some guides like this:
    https://quality.Mozilla.org/docs/mobile-Firefox/Firefox-mobile-enabling-the-error-console/
    that seems rather useful. However, I can't open the "preference" as he says.

    Any suggestions are welcome. I'm open if you want to use the console via a remote computer, as doing the Opera or Chrome; or simply view all on the mobile device itself. I'm also happy if anyone knows how to open the preferences window. I use Firefox 15 on Samsung Galaxy Tab.

    Thank you ~!

    This article is dated. Please visit https://hacks.mozilla.org/2012/08/remote-debugging-on-firefox-for-android/

  • HP 15-p002 lodge - how to open the housing cover

    Hello

    How to open the lid of the HP case for laptop 15-P002
    I want to replace the hard drive, but I have problems with cover...

    Wieper.

    Step by step instructions and video.

    http://support.HP.com/us-en/document/c04330942

    REO

  • HP Pavilion 23-g010: HP Pavilion 23-g010 how to open the back casing

    I would like to put the extra RAM, but could not find any instruction on how to open the case. Can someone please?

    Finally find the solution here:

    http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c04275858

    It is not enough for g010, but good.

  • How to open the system maintenance Troubleshooter in windows vista

    How to open the system maintenance Troubleshooter in windows vista?

    Hello

    Please be informed that Troubleshooting maintenance system was introduced from Windows 7.

    However, you can run the fixit mentioned below for Vista.

    http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

    You can take a look at solving the problems of system maintenance in windows 7.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter

    For more information, please visit the links below.

    http://www.Microsoft.com/atwork/maintenance/speed.aspx

    Optimize Windows Vista for better performance.

    http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

    Warning of Chkdsk.

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    For the anti-virus scanning:

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I hope this helps.

  • How to open the NAT for a Linksys 160N with a WRT54G2 wireless ethernet bridge?

    Hello, I have a Linksys 160N2 router, and I hooked a version w / updated router Linksys WRT54G2 {v24 sp1} DD - WRT.  It worked great, but now my sons xBox 360 States that the NAT is moderate and should be opened.  I don't know how to open the NAT.  Any help will be greatly appreciated.

    This do-

    Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

    Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

    (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...

    (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

    3) click on Setup and change the size of the MTU to 1452 and click on save settings... Click the status tab, and take note of DNS1 and DNS2 address...

    (4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
    IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

    (5) also assign addresses DNS on Xbox
    Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...

    (6) turn off your modem, router and Xbox... Wait a minute...

    (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

  • How to open the url of the calendar app like trip Blackberry?

    I m like Blackberry Travel application development. In Blackberry Travel, add when a flight, he adds in the calendar. In this case 'Notes', which appears a url to load the application and see the flight.

    I need to do the same thing, but only the behavior of app loading. So, I have two questions:

    • How to open the app to the url? I have seen this but, when I use the HttpFilterDemo sample, when I click in the url www.rim.com I typed in a calendar event, run never setRequestProperty method.

    • How can I watch 'open with Blackberry' when I click on the URL?

    Thank you very much.

    It s done!

    A perfect example in the documentation for the blackberry developer

  • How to open the files .fxm and .fxr with fax windows 7 & scan?

    How to open the files .fxm and .fxr with fax windows 7 & scan?  These faxes have been received when I had Windows XP.

    Hello

    A file with FXR and FXM file extensions is a Document received from WinFax.

    You can open the FXR and FXM file by double clicking on it and let your PC decide which default application should open the file.   If no program opens, the FXR and FXM file, then you have probably an installed application that can view and/or edit FXR and FXM files.

    You can use a Notepad or another text editor to open these files.  Number of files is files read-only, which means little matter file extension, a text editor may be able to view the contents of the file properly.  This may or may not be the case with FXR and FXM files, but it's worth a try.

    How a FXR and FXM files:
    There are two ways to try to convert a file to a different file type:

    a. open the FXR file in its default program and choose to save the file open in another file format.

    b. use a softwarefrom online file conversion to convert these files to another file format.

    Note:
    using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Thank you

Maybe you are looking for