How to participate in hard drive

Similar Questions

• How to clear the hard drive on my old iMac of 2008?

  I have a 2008 iMac I want to recycle. How to clear the hard drive?

  (What is PPC?)

  PPC stands for Power PC. Is the name used to refer to the old Macs that uses a Motorola processor instead of Intel chips used today. To clear your old Mac follow the advice in this document from Apple... What to do before you sell or give away your Mac - Apple Support

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• Office jet pro 8500 a: elimination of printer, was this encrypted model? How to destroy the hard drive?

  This model encrypted?

  If this is not the case, how to destroy the hard drive? Where is the hard drive?

  Hi @Diane47,

  Thanks for joining the Forums of HP Support with your request to printer.

  I understand that you have a HP Officejet Pro 8500 has e-all-in-one printer you plan to elimination and you wonder if the hard disk is encrypted and how to destroy the hard drive. I would like to help with that.

  HP Officejet Pro 8500 has e-all-in-one printer don't have a hard drive. It contains a very small amout of memory, so it can keep in memory the printer and fax settings.

  You can clear the memory by restyoring the printer back to the default values.

  1. on the printer Panel, select Setup.

  2. from the Configuration menu, select Tools.

  3. on the Tools menu, select Restore Factory Defaults.

  HP offers to recycle their products for you. If you want to know more about it, please click here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Satellite P10 - how to change the HARD drive?

  Hello

  I want to change my Satellite P10 for a bigger HARD drive.
  But I Don t know how to remove the DvD drive.

  On this laptop, I mean that the HARD drive is under the DvD drive.

  Please help me, if you know how to change the HARD drive.

  Welcome them

  Mister_X

  Hi Frank,.

  I'm not too sure about the P10, but on my A30 the hadr drive is under the DVD-ROM. It is secured in place by a single screw (accessible from under the laptop), and when it is deleted the DVD-ROM slides just to place revealing the hard drive.

  The hard drive is fixed with 4 screws (2 on each side)

  HTH

• S35dvd: How to remove the HARD drive?

  Can someone tell me how to remove a hard drive from a s35dvd please? I can't find a manual anywhere, and I need to remove the drive to try to remove a virus load that I can't remove it with windows running or even in safe mode.

  Thank you

  Hello

  Unfortunately this Toshiba device it unknown to me and I don t have found all documents on the replacement HARD drive.
  But as far as I know, there should be only 2 possibilities how to do to remove the HARD drive.
  1.) under the disk HARD is placed at the bottom of the unit and you should only remove the cover of the HARD drive.
  Or

  2.) HARD drive is placed in the Notepad. In this case you will need to Remover the keyboard and some covers to replace the HARD drive

  Well, I can give you only that info. I think that if you want to know the detailed instructions, you should contact Toshiba service partner because it has a more detailed information on these cases.

• Satellite A30 - how to remove the hard drive

  Hi, new here...

  Can someone tell me how to remove the hard drive in my Tosh A30...

  Thank you
  captainp

  Hi Tim,.

  The hard drive on your SA30 is in the optical drive, but slide the optical drive out of its housing (undo the F5 marked screws on the bottom of the laptop).

  The hard drive will be visible fixed with four Phillips head screws that need to be removed (two on each side of the hard drive. With the removed screws, gently slide the hard drive toward the front of the laptop to disconnect its connector and carefully pull it out of its Bay.

  HTH

• How to partition a hard drive for a B50-70 for Linux? No problem with that?

  Hello

  How to partition a hard drive for a B50-70?

  I want to install Linux and keep Windows 8.1 also.

  This will affect the software factory example: back up hard drive function, OKR?

  Problems partitioning B50 of the 1970s?

  Is it acquisitions have 8.1 Windows on a laptop Lenovo-B50-7?

  What will happen if I got rid of Windows 8.1 operating system?

  Thanks in advance.

  Information on the machine:

  B50-70

  Model name: 20384

  Windows 8.1

  I've not seen / heard of successful use of the flash drive for recovery purposes. The default software using optical disk, when I used it on my G580.

  If your laptop does not have a CD / DVD burner, you may need to contact them directly to discuss this option.

  As to where he is? It is a hidden partition on the hard drive, is usually not accessible.

  Cloning the hard drive can not return to that partition hidden - it would be a little bit the clone of the drive to work.

  I recommend to download your manual of maintenance on the Support site and learn more about the 100% specific for your laptop recovery process.

  CB

• Pavilion ze5730us laptop: how to remove the hard drive of the computer laptop Pavilion ze5730us

  Can anyone tell please how to remove the hard drive of the computer laptop Pavilion ze5730us?  I know its under the keyboard somehow, but I don't know how or where that open.  I could not find this model on YouTube either.

  Thanks in advance for your help.

  D.

  Hello:

  The only manual that I could find is one that covers the ze5600.

  See if it will work for your model too.

  http://h10032.www1.HP.com/CTG/manual/c00246219.PDF

• How to reformat the hard drive and do a "clean" install

  A recent virus attack, my computer has lost some files of the operating system.  With the help of the Lim has provided the recovery disk, which offered ' upgrade/repair' or a 'new installation '.  I chose ' install new ', actually I found many of my files are still there - that means that if a virus has escaped "Detection / removal" will always be there.

  Question: How to reformat the hard drive and do a 'fresh install' on a clean hard disk "? ". (I have a drive to Win XP with service pack 3 and a driver disk for the hardware installed on my computer of the regulations.)

  Thanks in advance

  Skip

  Since you have a Dell and a recovery CD and not a recovery Partition, check how many partitions you need by using disk management:

  http://www.theeldergeek.com/disk_management.htm

  In case you have a partition with the operating system and a partition of the utility partition, I would only recommend formatting the partition from the OS. The Partition utility can be very useful.

• How to format my hard drive as my operating system running IM?

  How to format my hard drive as my operating system running IM? I tried many ways must my computer tells me I have to stop all programs that I have running. play help as soon as possible!

  Some PC contains a hidden hard disk restore partition. If yours is one of them, this is how you return your PC to its original state.

  What is the brand and model of your PC?

  Yet, this is a pretty drastic step. There is more easy and faster to improve performance. If you do not want to give it a shot, let us know. And also tell us the specifications of your PC, type of XP, SP, etc.

  Also, you might find follows her beneficial:

  Here are the usual causes of slow:

  1. malware (malware). You need to rule out first! This page has excellent information:

  http://Web.archive.org/Web/20080610163247/http :// www.elephantboycomputers.com/page2.html#Removing_Malware

  2. some programs aimed at combating malware (for example, Norton and McAfee). Ironically, they can slow things down because they use simply much too many resources. Sometimes they cause conflicts with other programs. And their default mode is to scan your entire hard drive whenever you start. Fortunately, there are other programs of anti-malware software available that use much less resources (p. ex., NOD32, Avast and Avira).

  3. too much of certain types of programs still running in background - with or without your consent. (Then again, a lot of programs running in the background of the consequences trivial.)

  To determine each program and process, you are running, use the task (Ctrl + Alt + Delete) Manager and click the processes tab. You should be able to sort by CPU usage or memory usage for a good ideas that are resource/memory hogs. You must write the names of all the processes for future detective work (or take a snapshot and print it).

  Use these sites to determine what these programs are, and learn how configure them to not always run when starting:

  http://www.PACS-portal.co.UK/startup_content.php#THE_PROGRAMS
  http://www.bleepingcomputer.com/startups/
  http://www.AnswersThatWork.com/Tasklist_pages/Tasklist.htm

  Sometimes, it is recommended to use msconfig to configure programs to run at startup. A better, more thorough program is Autoruns:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  But before that, you must use the settings preference of the program in question. Otherwise, for some programs, they will return to the list of startup anyway!

  If you do not want to use msconfig, it can be accessed in this way:

  Start | Run | Type "msconfig" (without the quotes). Enter (or OK)

  4. not enough RAM, causing the PC too rely on the pagefile. A quick way to determine if what is happening is to open (Ctrl + Alt + Delete) Task Manager, and then click the performance tab. Then the three values under Commit Charge (k) Note: in the lower left corner: Total, limit and peak.

  The Total number represents the amount of memory you are using right now. The vertex figure represents the maximum amount of memory you made since the last boot. If these figures are lower than the value of the amount of physical memory (K), then you probably have lots of RAM. In case you want to study it more, you can run the Page queue Monitor for Windows XP:

  http://www.dougknox.com/XP/utils/xp_pagefilemon.htm

  5. you can also verify that the access mode of your hard drive has not changed from DMA to PIO:

  http://www.technize.com/2007/08/02/is-your-hard-disk-CDDVD-drives-too-slow-while-copying/

  and

  http://winhlp.com/node/10

• How to replace a HARD drive

  I need a step by step guide on how to change a HARD drive

  Google is your friend:

  http://www.Google.com/search?q=how+to+change+a+hard+drive&ie=UTF-8

• How to format a hard drive when you're locked volume popups?

  How to format a hard drive when you're locked volume popups?

  Looks like you are trying to format the disk that contains the system volume of in WinXP.  You can not.  It would be the computer equivalent of sawing off the branch of the tree, you sit and WinXP is "too smart" to enable this.

  After saving all the data you want to transfer to the new installation of the OS, simply boot from the Windows XP installation CD.  You will be offered the possibility to delete, create, and format partitions as part of the installation process. (You may need to rearrange the order of the boot devices in the PC BIOS to boot from the CD.)

  How TO install Windows XP
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;316941

  http://www.michaelstevenstech.com/cleanxpinstall.html

  http://www.webtree.ca/WindowsXP/CLEAN_INSTALL.htm

• How to access the hard drive USB on E3000? Am I missing something?

  I have my router configuration fine to the internet, as well as the media server.  I can't understand how to access the hard drive of my laptop, however.  The manual says to put 192.168.1.1 in the field the address of windows Explorer, but it gives me just the 'Setup' page for the router.

  Am I missing something simple?  I use Windows XP.

  Click on start - go to start > Run/start search and type "\\192.168.1.1" (without the quotes) and press on enter and it should ask the user name and password, the user name and password, use "admin" all lower case, and then click Ok... Now you should be able to see your USB... You must make a right click on it and select "Map network drive" and check the Enable box and below click Finish... It will map the USB on your computer... Once done, you will be able to send and receive data from your computer to the USB...

• How to format my hard drive to factory settings?

  How to format my hard drive to factory settings?

  Yes, I did. I think it is F8, but I'm not sure. I have a Studio 540.

  Also, I got all the disks. People on the phone to help me.

  Hey sheeti

  Studio 540 made by dell and you use dells recovery software

  I'm sorry, but they are the ones to ask if you have any problems with the help of their recovery process, because they designed the process

  the link below is dell support

  http://support.Dell.com/

  Dells information about restoring to factory standards is in the link below

  read not two and three in the link below, it should help you

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_347576&isLegacy=true

  Walter, the time zone traveller