How to pass a value of text to another page?
If you have a text input and a button to the page 1 how to make that value available on page 2 after clicking on the button. I created a flow of the page by clicking on the button brings me to page 2 but not sure where you get the value of input text that was on page 1.Thank you.
As you can see in the code I added an inputText and a CommandButton on page1.
I use setActionListener to pass the value of page1 page2 declaratively.
In faces config, I created a stream of page 1 to page 2. The value 'of result' as the action attribute of the commandButton control.
I created with an outputText page2.
Everything you enter in page1 should appear in page 2 when you click on the CommandButton.
Yet, you can't make it out, let me know your email id, I will send you the sample application.
Tags: Java
Similar Questions
-
Passing a value of ITEM to another page (java popup)
I have an interactive form that displays data based on query.
For example.
Page 1
Select a, b, c from test1;
element of a, b, c values would be P1_a, P1_b and P1_c, respectively.
I created a link to c field. When I cliicking on the link up a window
and redirecting to another page.
I then run a separate application on the new page 2 as follows.
Select x, y, z with x = test2: P1_a;
The problem is nothing is displayed and no error no is shown. The pop up successfully
to get up, but no data is displayed.
How to pass the: P1_a value of page 1 on page 2 for the query to work?
I have to explicitly set it elsewhere? I thought that this is already done.
Thanks in advance for your time,
ANON
Published by: Anon on August 17, 2009 19:56Try to use a collection. This always works for me... simple and neat.
-
How to pass item values to the fields in Page #2 Page 1
Hello
On the first page, I have two points and a single button.
Point n ° 1 P1_PROJECT_NAME display text (escape special characters, does not save the State)
Article #2 P1_PROJECT_ID hidden and protected
Button #1 create redirect page 2
When the user clicks on the Create button, 2nd page opens with the form for creating detailed project which includes the two following fields.
#1 P2_PROJECT_ID a text field
#1 P2_PROJECT_NAME a text field
I want to change the P1_PROJECT_ID value to the field of P2_PROJECT_ID and P1_PROJECT_NAME to the P2_PROJECT_NAME field.
How can I do this?
Thank you
GuyGuy,
If you change your button and go to the "URL redirection Option" section you will find two fields: 'Put on these elements' and 'with these values.
Simply enter your values in these two fields separated by commas, in the same order.Kind regards
--
Paulo Vale
http://Apex-notes.blogspot.com -
Passing a value of item to another page via the button set to redirect to the page
Hello
I'm new to APEX and I develop an application to manage Oracle database user accounts. I have a (8) page that has text elements for the user name and the database name. I have a submit button (this works very well) who deliver... the ALTER USER statement to reset his password and unlock the account. I have another button that if:
- get the value of username - P8_USERNAME
- assign to an element of application - FIND_USER_IN_DB
- redirect the page application - page 11
The issue is that FIND_USER_IN_DB does not get filled and page 11 which is a simple report with the following query:
SELECT *.
OF valid_db
WHERE username =: FIND_USER_IN_DB;
How to achieve this?
Thanks for your help.
Steve
A page redirect is actually nothing more than the rendering of an anchor tag or call apex.navigation.redirect. The link provided by these is generated when the page is rendered. Thus, when the page is rendered (in charge) and P8_USERNAME session state is NULL, then the link will be an empty value. There is nothing sad about the fact that when you change the value of the element on a page that session state will not change automatically and it's just about understanding session state.
Let's say that you will present the session before the redirection if status point. Would it change anything? N ° the link, as I pointed out, has already been made, and no substitution of session state not be made on a redirect.
You'd better be off by submitting the page via the button instead of a redirect. This will set the session state of your object to the desired value. You can then use a branch to redirect to the correct page setting the value of an element whose state of session of P8_USERNAME. You can even choose to use a process or a calculation to set the value of the application instead of by a link element, so that you can keep the application not manipulable by the user element.
-
Hello.. I'm creating an application of streaming, in which I have a list field in a screen like this...
1
--------
2
--------
3
--------
and when the item 1 is selected means a url must be passed to the video player...
I created the list field screen in a package and a video player in other package... but I do not know how to pass the value of the field from the list to the player... Help, please... its URGENT...
You can get the index selected by the listname.getSelectedIndex () method and compare that value with Vector data (data store URL) .that you will give a correct value from the URL and pass it.
-
How to pass the value of the run-time file .sh by Oracle procedure
I have a file test.sh that contain
#1/bin/bash
exp test/test@orcl file=/home/oracle/dump/test.dmp log=/home/oracle/dump/test.dmp grants = Y = index constraints Y = Y = (test) owner statistics = none
Exit 0
I craete a work called Create_job_proc in this work, I want to pass the value of job_action is the location of the file test.sh to
/U01/home/Oracle/dump/test.sh and want to spend the test/test@orcl as a variable...
Please suggest me... how to pass the value of Job_Action which will replace the .sh file content test/test@orcl to the value of the time of execution as scott/tiger@hr
Thank you much Parth... It works perfectly...
Thank you all for your help...
-
Hello:
How to configure contextual events publish several values of payload?
On click of a button, I'm declaritively publish a contextual event, which works very well when a single value is passed to the event handler.
My event handler method has the signature of:
eventHandler (String)
But now I also have an oracle.jbo.domain.Number, so my new eventHandler looks like this:
eventHandler (Number, String)
How to pass two values during editing of the event and how to place the payload with multiple values for the new eventHandler?
All article or code would be greatly appreciated.
Thanks for the help.You define a bean holding your values and pass an instance of the bean as a payload...
Timo
-
How to pass the value of the element from one form to another form?
Hi all
I need your help to complete this task.
I have a form page named reserve form.i have some five fields selection list in the form of reserve, after I chose the first value from the selection list, I create a button in the form of reserve, when I click on the button create, it will open another form page named set form in this form page , I have a field selected, the list of values in configure the form depends on the values selected as a reserve, it means that I have to change the value of page of a form to another form.
Please suggest a solution, how to pass the value?
Thank you
Robette.Check out the button create on Page 8.
In the Action when the button is clicked, the configuration is
The value of these P35_IT_PRODUCT
With these values & P8_IT_PRODUCT.Kind regards
-
How to pass the value of the variable record type in the procedure
Hai All
My Question is
I have a table named Emp and the structure
ID Varchar2 (25)
Name varchar2 (25)
Number of salary
And now, I created a folder named Rec_Emp
Like this
Type Rec_emp is made
(Rec_Id varchar2 (25),)
rec_name varchar2 (25).
Number of Rec_salary);
rec_emp emp_record;
I created a SQL type
Now how to pass the value type in the procedure
Thanks and greetings
SrikkanthMYou are looking for something like this
create table my_emp (id integer, name varchar2(100), sal number) / create type my_emp_obj as object(id integer, name varchar2(100), sal number) / create or replace procedure insert_into_my_emp(pEmp_Obj in my_emp_obj) as begin insert into my_emp (id, name, sal) values(pEmp_obj.id, pEmp_Obj.name, pEmp_obj.sal); end; / begin insert_into_my_emp(my_emp_obj(1,'karthick',1000)); end; / select * from my_emp /
-
How to pass the value of the item Application Javascript function.
Hello
I have the JavaScript in the properties attribute of the HTML Form element
I'm on page 1 and passing the value of the item page P1_DEPT_NO. It is perferctly working very well and I am able to get the exact value of the element on the page
I'm on page 1 and passing the value G_DEPT_NO of the Application element .onchange="javascript:function1($x('P1_DEPT_NO').value);"
The problem here is, I don't get the point of Application inside the javascript function value.
I tried to use alert(); and it gives me the undefined value
I just want to know, How to pass the value of the Application in Javascript element.onchange="javascript:function1($x('G_DEPT_NO').value);"
Thank you
DeepakDeepak,
I'm not a Javascript expert, but the suggestin I did was because the javascript is a case-sensitive... language and thats why onChange is not the same thing as onchange.
Not sure if this is causing the problem.Application elements not associated with a page and have therefore no properties user interface.
So, as mentioned in another post, the rendering would not work for the elements of the application.
If it is for a single item, used only on this page, you might create a hidden page element and use it fo your goalIf you want to keep watching objects application and AJAX, this page contains examples of using AJAX to solve problems like the one you mentioned.
http://www.Oracle.com/technology/OBE/hol08/apexweb20/ajax_otn.htm#T1BThank you
Rajesh. -
Who knows how to pass a value from the form on the next page of javascript?
I have a simple drop-down list. Maybe this isn't the best way, but I use the MM_goToURL function on the onchange event. It works very well so he can redirect without clicking on the submit button.
What I need to do, it's pass the value selected on the next page and grab it so I can use Coldfusion to manipulate the results.
Help, please.The answer is too simple. Just use javascript to submit the form onchange.
-
How to pass the value to query LOV of rows in the table.
simple table on the page of the ofa:
col1 col2
ABC lov-activated
PQR lov-people with disabilities
MNO lov-activated
Col2 is lov and turned under condition if it meets certain conditions. I am capable of until.
How to pass values in col1 to the co of lov lov query?
Help, please
Thank youHello
You can pass the value to LOV in this way in a region of the table.
col1 col2
DEPTNO empname (Lov field)
1 lov1
2 lov2requirement: lov1, you will need to pass the value of deptno 1.
If deptno is message style text then you need to create a value of the deptnoFormValue with the attribute in the base page table area, and the same instance of vo.
danslechamp empname lov
fields of lov region:
EmpName,
DEPTNO,
and deptnoFormValueinLovlov mappings: a first return to the basic page.
a second part of the criteria
Point lov region: deptnoFormValueinLov
Return article: -.
Point of criteria: deptnoFormValue
Required: true
Query programmatically: trueNow create a controller for the region of Lov
the code example is:
Import oracle.apps.fnd.framework.OAApplicationModule;
Import oracle.apps.fnd.framework.OAViewObject;
java.util.Dictionary import;in the process request:
OAApplicationModule m = pageContext.getApplicationModule (webBean) (OAApplicationModule);
Dictionary passiveCriteria = pageContext.getLovCriteriaItems ();
String deptno = (String) passiveCriteria.get ("deptnoFormValueinLov");System.out.println ("org code in controller of lov is" + orgcode);
OAViewObject vo = (OAViewObject) am.findViewObject ("view instance of lov");
vo.setWhereClause ("Organization_code =" "+ deptno +" ' "");System.out.println ("request after adding where clause." + vo.getQuery ());
hope this is useful
Kind regards
Barros.
[email protected] -
How to pass the value of a column to a variable to be used in another analysis
Hello
I'm on OBIEE 11.1.1.7.1.
I have the following problem.
I have DISCOVERED called analysis. It has just a column with the result. Simple. Assume that the answer is 2500
I have another scan which has two other columns, namely GOLD and LOANS. I want to calculate the total DISCOVERED + GOLD + READY.
That's why I need to pass the value of 2500 of the first analysis of the second analysis via a variable.
I can not add all three of them in the same analysis there are various filters for OVERDRAFT, and the application of these filters on the GOLD and LOANS gives the desired result. I tried to add filters in the column of the overdraft, but that doesn't seem to work.
Any help will be greatly appreciated.
I'll give you an example. I hope that you will mark for my time...
Hope that you will be aware of how to combine a similar request.
in the first criterion you have
Goldprice Loanamount year 0
Second criterion
Year 0 0 Overdraftamount
the two maintain the necessary filters.
Add a column of result (option you can see in the topic area pane) that add all three columns. You can choose the columns. formula will come something like below
saw_1 + saw_2 + saw_3
Thank you
AJ
-
How to pass the value of DocTitle in IDOCSCRIPT dynamically?
Hello
Can someone please tell me how to pass value dynamically (I mean dDocTitle value) in IDOCScript to fetch a particular file.
Concerning
REDAHow to display the CSST? Link you to it somehow? If so, you can pass a variable name in the URL and the name of this variable will be available in the Idoc Script.
Jonathan
http://jonathanhult.com -
How to pass the value of the Timestamp from one Page to another
From a column report link, I need to pass a DATE (that includes both) form one page to the next. If I use the basic name/value pairs under the section of the column link, the URL stops when it encounters a colon. For example, '2012-05-08 16:38 ' invades as ' 2012-05-08 16 "»
In addition, all values after the colon in the DATE value are removed from the URL.
I know not why this is happening. This is because oracle sees the ":" and this is a field terminator does not assume.
How can I work around this problem? I saw the post suggesting the API URL_ENCODE but, I can see someone to call this, or any other code in the section of the link column. I've also seen some people suggest that this be done as a conditional branch. Simularly, I can't find in any case to call the branch section of the link column.
There must be a way to pass this value, and I can't be the first person to ever attempt this. I am totally stuck and have spend hours on this issue.
Thank you
-JoeAs fac586 said, you wouldn't have this problem if RISKDM2. INTRADAY_VM_CLEARER has a primary key, you can reference instead. Still, can you guarantee that the date will be unique?
If so, suggested use fac586 of 'YYYYMMDDHH24MI' format mask for the link, but set the value of a hidden point new (say PX_HIDDEN_PARAM_ITEM). The last step then on the page that you are linking, have simply a page process that defines the element of effective date of to_date (PX_HIDDEN_PARAM_ITEM, 'YYYYMMDDHH24MI'). This before the process that brings back the record and after that should work just fine.
Maybe you are looking for
-
Music player in iOS 10 song repeat in the lock screen
I've just updated to iOS 10 and when I play a playlist and lock screen it doesn't repeat the current song and will not random, unless the screen is unlocked. All of the suggestions.
-
Change drive hard spectrum x 2
You will need to change the 128 GB ssd to a larger disk. How to open the back cover? Is it posible to change the hard drive?
-
Numbers, Pages, and Keynote cannot update or buy
I have a MacBook Pro running the current software, 10.11.2 I have an old copy bought in Pages, Numbers and Keynote, P N & K. I received a 'notice' update, but it will be not updated for some unknown reason. I decided to buy a new game. I couldn't fi
-
How to convert months to all THE PLUGS for example December 5, 2015 to December 5, 2015
It must have an easy solution. My date indicator returns the format DD-MMM-yyyy. I need the MMM to be all caps.
-
I get this error message: Code 80070663
I get this error message: Code 80070663 and it seems that there is no solution for it to what tells me the support. Please give me a process step by step in order to fix this problem please!