How to pass in addition properties of active nav buttons that I ride on others?

Similar Questions

• How to pass the Local C drive D drive space that is saturated

  D drive shows 417 GB free of 418 GB;  C shows 601 MB free of 29.2 GB.  I moved all of my photos on L drive folder but result in little, if any, change in space.  My computer is very slow, to the point where I sometimes can not connect to the Internet or Outlook.

  I hope you said your drive sizes correctly.

  Your drive C: disk seems extremely low for Windows Vista to be installed on.

  And whence L: drive?

  You can not move space from D: to C: drive.

  Read this tutorial on how to:

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  See you soon.

  Mick Murphy - Microsoft partner

• C# teststep: how to pass the correct Visa instrument reference?

  Hello

  in c#, I have created a DLL for an instrument with functions as initialize, SetVoltage, close.

  In the Initialize function, I create the object of this session with:

  RM = new ResourceManager();
  Instrument = new FormattedIO488();

  Now, I put the Initialize function in TestStand as a 2014SP1. NET-Module-NumericLimitTest.

  When you open the properties of my new step in the Type Editor there is a button "default Module" where I can choose the function of c#-DLL.

  "All parameters are displayed (such as VISA / addresses) and also an additional parameter 'Return value' reference object ' OUT that was added by TestStand.

  -> I store this value in a StationGlobal.

  The question now is:

  If I have more than one device of the same type (means two or more calls Initialize) how can I pass references saved to the next function (SetVoltage) that is performed on the correct instrument?

  Thanks for help

  Resolved:

  Select "Use object existing" UN - Net Invocation and past the reference saved in there.

• How to pass the parameter to the script for interface/Package in ODI

  Hello

  Yesterday I asked a question how to pass a parameter to run the script interface or the procedure?

  I don't know if it's possible.

  Any clarification will help you.

  Kind regards

  Mahesh

  Mahesh, why not try this in your machine? This will give you more clarity and confidence.

  ODI has always check if there is any variable used inside an object regardless of the interface or procedure or package. So whenever you generate the script, you will be asked to select the boot parameters. She's. Whenever you use this scenario, make sure you that you add the variables in the additional variables section of the Properties tab.

  So answer is that it is possible.

  Bravo!

• [Solved] How can I view the properties of a network connection?

  = Solution:

  I activated the "Netman" service (friendly name: "Network connections").

  =====

  Don't forget that? Yes. I've seen one of them because I've gone from WinXP to Win7.

  

  Note: The image above was extracted from the Internet. It is not my computer.

  See the checkbox "Show icon in notification area when connected"? That's how I got Windows XP configured so that I would see a network for each network adapter icon in the tray all the time. Now I never see a network icon. I want to be able to bring up the properties so I can solve network problems.

  My new Manager computer devices">"Network adapters"indicates:

  Intel Centrino WiMAX 6150
  Intel Centrino Wireless-N 6150
  Microsoft Virtual WiFi Miniport adapt
  Microsoft Virtual WiFi Miniport adapt #2
  Realtek PCIe GBE Family Controller

  How can I view the properties of a network connection? And how I can put the properties of connection icons in the notification for all connections of 5 area?

  Thank you.

  It's very strange.  I used this command on dozens of computers (at least) and never have it back empty.  I don't know what to do. Here's a typical result.

  

• Collecting additional fields in Active Directory

  How is it difficult to extend the Active Directory Connector to extract data from fields for additional resources?  I need complete my contact records with the data stored in the employeeID field in Active Directory, but it is not currently available.  I have never tried the box connectors output change.  What is involved beyond adding in games of fields and questions section of the Infra.Connector.LDAP.AD.icnf file?

  SenseiTX welcome!

  Fortunately, we had the same requirement earlier. And it is relatively easy to implement - just a few lines in a configuration file.

  Attach the file you need to extract and place it in the folder % VSM_SYSTEM%\Config. You do not have to rename the file - the custom file extends / replaces only sections of system requirements.

  I do not remember if you must parse (less likely) queries, restarting IIS or VSM services (most likely), but you try each action if you will see no difference.

  You can compare this file with the original to see what changed.

  Concerning

  Gytis

• How to pass the album Live view mode Design while working on a fluid page? The drop down option isn't there as if it was on other pages.

  How to pass the album Live view mode Design while working on a fluid page? The drop down option isn't there as if it was on other pages.

  You can not.  If you want to work with FGLayouts, I recommend drop back to the Release of June 2014 CC before they took the Design of FGLayouts mode.

  You can get the version of June 2014 DW direct links below:

  Win: http://download.adobe.com/pub/Adobe/Dreamweaver/WIN/CC/Dreamweaver_14_LS20.exe

  Mac: http://download.Adobe.com/pub/Adobe/Dreamweaver/Mac/CC/Dreamweaver_14_LS20.dmg

  Solution #2: Modify your CSS FGLayout file by adding an X to the code as shown below.  This trick DW into thinking that it is a normal page, so you can use the new Design view.   NOTE: Do not change the CSS in design Panel.  Do it in Code view.  Record.  Close DW.  New launch DW.

  /*

  Properties Grid Dreamweaver fluid

  ----------------------------------

  DW-num-CLO-mobile: X4;

  DW-num-CLO-Tablet: 8;

  DW-num-OCOL-Office: 12;

  DW-gutter-percentage: 25;

  =====================================

  Nancy O.

• Header of page-how to pass a dynamic value?

  Hello
  
  I created a page - which redirects to an external link.
  I have following code in the page header.
  
  < META HTTP-EQUIV = "refresh" CONTENT = "2; URL = XYZ.com ">".
  < b > < p > < p > < p > < p > < p >
  
  < /b >
  
  
  When I run this page, redirects after 2 seconds to this particular url: xyz.com.
  
  My query is: Ii would there the URL value dynamically.
  
  I tried with the following code in the header:
  
  var abc = $v ('P97_TEST');
  < META HTTP-EQUIV = "refresh" CONTENT = "2; URL = abc ">".
  < b > < p > < p > < p > < p > < p >
  
  < /b >
  
  where P97_Test is an element of text field.
  
  But he directs me to a url: my_apex instance/abc. It does not work.
  
  No idea how to pass the value of the url dynamically? I need to get the success of a particular URL.
  
  Thank you
  Archana

  Dear Archana,

  I found the following solution work:

  (1) create an element on the page to the URL (in this example, P3_URL)

  (2) create a pl/sql process
  type: PL/SQL anonymous block
  address the point: on the laundry before header
  Source:

  begin
  :P3_URL := 'http://www.google.de/';
  end;
  -- this can be as sophisticated as you need
      
  

  (3) according to the Page Properties / header before HTML

  Marc

• How to pass variables by using the command line when starting from a native application ActionScript

  How to pass in variables or arguments to start using the command line when starting a native ActionScript application? For example, I have my app MySweetWidget call and it was compiled with Adobe AIR runtime in captivity so now I have MySweetWidget.exe.

  In the command line, I call MySweetWidget.exe and would like to pass in variables or properties of the application. I guess that these variables are read from the loaderInfo.parameters object.

  Please let me know if the Adobe AIR runtime supports passing the parameters to native execution. If so, I would like to help determine the correct format of how pass variables. So would you want to read those loaderinfo.parameters object?

  Thank you

  Jeff

  I found the answer to my own question:

  Yes, it's a feature supported. It is documented on the following page:

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/desktop/NativeApp lication.html #event:invoke

  When you subscribe to the event from the NativeApplication invoke it will subsequently send the event and you read the table of e.arguments object to get the start in the native application arguments.

• How to pass an argument to a standalone java class JDeveloper

  For the experienced:
  
  In JDeveloper when you write a java class with a main() method that takes no arguments, you just click with the right button on the java file and choose run to run the program. But suppose the main() method takes arguments, how to move your arguments to the program? This is especially a problem I use the studio version of JDeveloper (10.1.3.4 and 11.1.1.3 Versions) that each uses the version of the JDK included with, rather the JDK (which is yet another different version) installed at the level of the OS on the PC.
  
  Thanks a lot for your help!
  
  
  Newman

  Hello

  If you mean how to pass arguments in JDeveloper:
  Tools > Project Properties > run/debug > change the default run Configuration (or create a new) > settings start > program Arguments - here you can set arguments

  Kind regards
  Branislav

• How to pass a variable to a swf file in another using the Loader?

  I'm loading a swf file from another swf using the method as follows:

  var myLoader:Loader = new Loader();

  addChild (myLoader);

  var url: URLRequest = new URLRequest ("myExternalMovie.swf");

  myLoader.load (url);

  How to pass a variable to the first SWF in the second?

  I'm not sure that "passage" is a term there, given that this generally applies to what happens with functions that can host variables to pass as arguments in the.

  When using the charger, you can assign an event listener to determine whether the activity of loading is complete and have an event handler that targets its contentLoaderInfo property to the event.currentTarget.content, which in your case would be the loaded swf file.  At this point, you can assign a value to a variable in this swf file by targeting...

  var myLoader:Loader = new Loader();

  addChild (myLoader);

  myLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, loadComplete);

  myLoader.load (url);

  var loadedSWF:MovieClip;

  function loadComplete(evt:Event):void {}

  loadedSWF = MovieClip (evt.currentTarget.content);

  loadedSWF.someVariable = ';?

  }

  It is probably possible you may also have the loaded swf the value rtrieve by targeting to the parent swf file, which would be both parents away because of the charger is the relative of the SWF loaded... unevariable = MovieClip (parent.parent) .someValue;

• How to pass the value to query LOV of rows in the table.

  simple table on the page of the ofa:
  
  col1 col2
  ABC lov-activated
  PQR lov-people with disabilities
  MNO lov-activated
  
  Col2 is lov and turned under condition if it meets certain conditions. I am capable of until.
  How to pass values in col1 to the co of lov lov query?
  
  Help, please
  Thank you

  Hello

  You can pass the value to LOV in this way in a region of the table.

  col1 col2

  DEPTNO empname (Lov field)
  1 lov1
  2 lov2

  requirement: lov1, you will need to pass the value of deptno 1.

  If deptno is message style text then you need to create a value of the deptnoFormValue with the attribute in the base page table area, and the same instance of vo.

  danslechamp empname lov

  fields of lov region:

  EmpName,
  DEPTNO,
  and deptnoFormValueinLov

  lov mappings: a first return to the basic page.

  a second part of the criteria

  Point lov region: deptnoFormValueinLov
  Return article: -.
  Point of criteria: deptnoFormValue
  Required: true
  Query programmatically: true

  Now create a controller for the region of Lov

  the code example is:

  Import oracle.apps.fnd.framework.OAApplicationModule;
  Import oracle.apps.fnd.framework.OAViewObject;
  java.util.Dictionary import;

  in the process request:

  OAApplicationModule m = pageContext.getApplicationModule (webBean) (OAApplicationModule);
  Dictionary passiveCriteria = pageContext.getLovCriteriaItems ();
  String deptno = (String) passiveCriteria.get ("deptnoFormValueinLov");

  System.out.println ("org code in controller of lov is" + orgcode);

  OAViewObject vo = (OAViewObject) am.findViewObject ("view instance of lov");
  vo.setWhereClause ("Organization_code =" "+ deptno +" ' "");

  System.out.println ("request after adding where clause." + vo.getQuery ());

  hope this is useful

  Kind regards
  Barros.
  [email protected]

• How to pass the value of the item Application Javascript function.

  Hello
  
  I have the JavaScript in the properties attribute of the HTML Form element
  
  I'm on page 1 and passing the value of the item page P1_DEPT_NO. It is perferctly working very well and I am able to get the exact value of the element on the page

  onchange="javascript:function1($x('P1_DEPT_NO').value);"

  I'm on page 1 and passing the value G_DEPT_NO of the Application element .
  The problem here is, I don't get the point of Application inside the javascript function value.
  I tried to use alert(); and it gives me the undefined value

  onchange="javascript:function1($x('G_DEPT_NO').value);"

  I just want to know, How to pass the value of the Application in Javascript element.
  
  Thank you
  Deepak

  Deepak,

  I'm not a Javascript expert, but the suggestin I did was because the javascript is a case-sensitive... language and thats why onChange is not the same thing as onchange.
  Not sure if this is causing the problem.

  Application elements not associated with a page and have therefore no properties user interface.
  So, as mentioned in another post, the rendering would not work for the elements of the application.
  If it is for a single item, used only on this page, you might create a hidden page element and use it fo your goal

  If you want to keep watching objects application and AJAX, this page contains examples of using AJAX to solve problems like the one you mentioned.
  http://www.Oracle.com/technology/OBE/hol08/apexweb20/ajax_otn.htm#T1B

  Thank you
  Rajesh.

• jdev11 - how the code filter additional liaison with radio buttons?

  Using JDev 11.1.1.0.2, ADF BC for model, ADF Faces JSF to view, deploy to WebLogic 10.3 appserver, database Oracle 11
  
  I asked for help (a do my work ask), that I'm the only developer JDev in our shop, and I looked at this problem too long and now have obscured the problem. I don't really want the answer (rather the skills needed to solve this problem), but it will ;-)
  
  Installation program:
  ExecwithParam base where the logic is stored in the AppModule. At this point, there is only a single binding TechID variable, which is passed to four of your different and updates the where clause and calls on each VO of the AppModule executeQuery. Works great so far!
  
  Need:
  Add additional time based filter: Group of buttons on the Radio for the last 30 days, 60 days, 90 days, choose a date. If choosing a date is sΘlectionnΘe, then the user selects a date with a date picker, and all records by this date are used.
  
  Support:
  There is a date variable in each query, and a common type of DATE filterDate may be added to each to filter with somedatefield > =: filterDate in each VO
  
  Thoughts:
  I like to break things in simple parts, so how about starting just the radio button.
  My thinking goes like this:
  Add another variable of filterDate liaison to each of your. Add this to the App Module.
  
  So, how can I set up a radio button so that I can get the value of the selected and then button that convert a SYSDATE - value and which use th e App Module logic? I continue to think of the big picture end of case and forget everthing. I know that's not difficult, but just ask me for some advice.
  
  At one point, I was thinking to add a clove of support to the option button, then wasn't sure if it was the best way and don't know how I would get the value in the AppModule. Part of the problem is that I came across a mental block. If I add the components that aren't linked data, as a selector of dates, or checkboxes, radio buttons, etc.. How can I get the values in the AppModule? I've seen many examples of data to related components, but do not know how to mix and match the binding with just a rich component controls base such as an input control. (This may better ask in a different thread).
  
  Finally, what of the big picture, the part about the addition of the datePicker - of ideas?
  
  Like cable TV, characters hosted - the kind that are related in my case the code! (Reference of American humor, must be familiar with USA cable TV channel (I'm addicted to the show House))
  
  Thank you, Ken

  Ken,

  A small correction to your last sentence - you don't want to refer to the support of the AM bean - you want to refer to the AM of the bean to support.

  If you want a very simple way: find the service for your AM method in the data control palette, drag-and - drop it on your page as a button JSPX. JDeveloper will automatically add a binding for the action in the pagedef. Then, double-click the button that results and create a new method of bean of support for her (in front of JDev, don't remember what we call the dialog box) - given the option, say JDev to put the code to link to you - then the resulting method should have the code that calls the method via the definition of the page. Simply add a bit of extra code to determine and set the date.

  John

• How to pass the parameter of workflow

  As being new owb, I'm still trying to figure out how to pass a parameter through workflow.
  
  I have this map with an input parameter, and I included this mapping in this workflow. I wonder how to pass a parameter value for this workflow and bind it to the mapping?
  
  ~ Prabha

  Prabha,
  Select the activity start then in the Explorer window (in the left upper corner of the process editor) on green sign more for adding parameter processflow.
  Enter the name of the parameter and specify the type of data (perhaps by default).
  Select your map, and then in the Exporer window click parameter mapping entry.
  now the object details window, you can bind the input parameter to the parameter processflow with change of binding property

  Kind regards
  Oleg