How to pass the Satellite P300-1EI for Win XP

Similar Questions

• How to pass the ObjectType as input for search criteria

  Hi all
  
  I have the search function that takes input parameters and returns all matching rows. It is only forward. My problem is to have several types as an input parameter. This is the reason why I'm not able to pass the value of entry for these types.
  
  My Input Type table looks like this.
  
  CREATE OR REPLACE TYPE T_T_PARTY_REQUEST_CRITERIA
  AS THE T_O_PARTY_REQUEST_CRITERIA TABLE;
  /
  CREATE OR REPLACE TYPE T_O_PARTY_REQUEST_CRITERIA
  AS AN OBJECT
  (
  SYSTEM_IDENTIFER VARCHAR2 (50).
  PROCESS_TYPE VARCHAR2 (50).
  UPDATED_BY VARCHAR2 (50).
  STATUS VARCHAR2 (50).
  CHILD_REQUEST_INDICATOR VARCHAR2 (25).
  TRACKING_REQUEST_INDICATOR VARCHAR2 (25).
  REQUEST_TYPE VARCHAR2 (50).
  REQUEST_TYPE_CLASS_NAME VARCHAR2 (50).
  PARTY_KEY_IDENTIFIER T_T_PARTY_KEY_IDENTIFIER,
  ADDTN_IDENTIFIER_INFO T_T_ADDTN_IDENTIFIER_INFO
  )
  /
  
  Finally the two entries are type again.my question is how to pass the values of these two T_T_PARTY_KEY_IDENTIFIER and T_T_ADDTN_IDENTIFIER_INFO. I defined the last two types now.
  
  CREATE OR REPLACE TYPE T_T_PARTY_KEY_IDENTIFIER
  AS THE T_O_PARTY_KEY_IDENTIFIER TABLE;
  /
  
  CREATE OR REPLACE TYPE T_T_ADDTN_IDENTIFIER_INFO
  AS THE T_O_ADDTN_IDENTIFIER_INFO TABLE;
  /
  
  CREATE OR REPLACE TYPE T_T_ADDTN_IDENTIFIER_VALUES
  AS THE T_O_ADDTN_IDENTIFIER_VALUES TABLE;
  /
  
  CREATE OR REPLACE TYPE T_O_PARTY_KEY_IDENTIFIER
  AS AN OBJECT
  (
  PARTY_KEY_TYP_NM VARCHAR2 (50).
  PARTY_KEY_VALUE VARCHAR2 (50)
  )
  /
  
  CREATE OR REPLACE TYPE T_O_ADDTN_IDENTIFIER_INFO
  AS AN OBJECT
  (
  ADDTN_INFO_KEY_TYP_NM VARCHAR2 (50).
  ADDTN_IDENTIFIER_VALUES T_T_ADDTN_IDENTIFIER_VALUES
  )
  /
  
  CREATE OR REPLACE TYPE T_O_ADDTN_IDENTIFIER_VALUES
  AS AN OBJECT
  (
  ADDTN_RQST_VALUE VARCHAR2 (50).
  ADDTN_RQST_VAL_DT TIMESTAMP (6).
  NUMBER OF ADDTN_RQST_VAL_NUM (19: 2)
  )
  /
  
  I glued the request my function here. When I pass the value null in the entry for these 2 types my query works. otherwise, it's say no valid Identifier.First I tried with the first Type.
  
  I am passing the value that
  (PRKYTP. PRTY_KEY_TYP_NM = ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM OR ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM = 'ALL' OR ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM IS NULL).
  
  Error is Error (34,147): PL/SQL: ORA-00904: "ITTPRC." "" "" PARTY_KEY_IDENTIFIER '. "" PARTY_KEY_TYP_NM': invalid identifier
  
  
  SELECT DISTINCT T_O_PARTY_REQUEST_IDENTIFIER (PR. IN BULK PRTY_RQST_ID) GATHER IN T_T_P_R_CRITERIA
  TABLE (CAST (I_T_T_PARTY_REQUEST_CRITERIA AS T_T_PARTY_REQUEST_CRITERIA)) ITTPRC;
  PRTY_RQST PR
  JOIN BUSN_APPLC ON BIAP BIAP. BUSN_APPLC_ID IS PR. BUSN_APPLC_ID
  JOIN INTN_STATS INSTS ON INSTS. INTN_STATS_ID IS PR. INTN_STATS_ID
  JOIN INTN_PROCES_TYP INTPTY ON INTPTY. INTN_PROCES_TYP_ID IS PR. INTN_PROCES_TYP_ID
  LEFT JOIN RQSTYP ON RQSTYP RQST_TYP. RQST_TYP_ID IS PR. RQST_TYP_ID
  JOIN ADDTN_RQST_INFO ADTINF WE PR. PRTY_RQST_ID = ADTINF. PRTY_RQST_ID
  JOIN ADDTN_INFO_KEY_TYP ADDKEY ON ADTINF. ADDTN_INFO_KEY_TYP_ID = ADDKEY. ADDTN_INFO_KEY_TYP_ID
  JOIN PRTY_KEY PRTKEY WE PR. PRTY_RQST_ID = PRTKEY. PRTY_RQST_ID
  JOIN PRTY_KEY_TYP PRKYTP ON PRTKEY. PRTY_KEY_TYP_ID = PRKYTP. PRTY_KEY_TYP_ID
  WHERE (BIAP. BUSN_APPLC_NM = ITTPRC. SYSTEM_IDENTIFER OR ITTPRC. SYSTEM_IDENTIFER = 'ALL' OR ITTPRC. SYSTEM_IDENTIFER IS NULL)
  AND (INTPTY. INTN_PROCES_TYP_NM = ITTPRC. PROCESS_TYPE OR ITTPRC. PROCESS_TYPE = 'ALL' OR ITTPRC. PROCESS_TYPE IS NULL)
  AND (PR. UPDT_BY = ITTPRC. UPDATED_BY OR ITTPRC. UPDATED_BY = 'ALL' OR ITTPRC. UPDATED_BY IS NULL)
  AND (INSTS. INTN_STATS_NM = ITTPRC. STATUS OR ITTPRC. STATE = 'ALL' OR ITTPRC. THE STATUS IS NULL)
  AND (PR. CHLD_RQST_IND = ITTPRC. CHILD_REQUEST_INDICATOR OR ITTPRC. CHILD_REQUEST_INDICATOR = 'ALL' OR ITTPRC. CHILD_REQUEST_INDICATOR IS NULL)
  AND (PR. TRACK_RQST_IND = ITTPRC. TRACKING_REQUEST_INDICATOR OR ITTPRC. TRACKING_REQUEST_INDICATOR = 'ALL' OR ITTPRC. TRACKING_REQUEST_INDICATOR IS NULL)
  AND (RQSTYP. RQST_TYP_NM = ITTPRC. REQUEST_TYPE OR ITTPRC. REQUEST_TYPE = 'ALL' OR ITTPRC. REQUEST_TYPE IS NULL)
  AND (RQSTYP. RQST_CLASS_NM = ITTPRC. REQUEST_TYPE_CLASS_NAME OR ITTPRC. REQUEST_TYPE_CLASS_NAME = 'ALL' OR ITTPRC. REQUEST_TYPE_CLASS_NAME IS NULL)
  - AND (ITTPRC. PARTY_KEY_IDENTIFIER IS NULL).
  - AND (ITTPRC. ADDTN_IDENTIFIER_INFO IS NULL).
  AND (PRKYTP. PRTY_KEY_TYP_NM = ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM OR ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM = 'ALL' OR ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM IS NULL).
  
  someone can say is that this approach is correct. If this isn't the case, suggest me.

  I am passing the value that
  (PRKYTP. PRTY_KEY_TYP_NM = ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM OR

  PART_KEY_IDENTIFIER here is a nested table. If you cannot join it like that.

  Try like this

  prkytp.prty_key_typ_nm in (select party_key_typ_nm from table(ittprc.party_key_identifier)) or
  

  Here is an example based on the EMP table.

  I created as a result of nested table.

  SQL> create or replace type my_emp_list as table of number(10)
    2  /
  
  Type created.
  
  SQL> create or replace type my_dept_obj as object(deptno number(10), emp_list my_emp_list)
    2  /
  
  Type created.
  
  SQL> create or replace type my_dept_tbl as table of my_dept_obj
    2  /
  
  Type created.
  

  I'm going to use the data of the table nested within a query to get the value of the emp table

   my_dept_tbl
   (
     my_dept_obj
     (
       10, my_emp_list(1,2,3,4,5)
     ),
     my_dept_obj
     (
       20, my_emp_list(6,7,8,9)
     )
   )
  

  The query would be like this

  SQL> select e.*
    2    from emp e
    3    join table
    4         (
    5           my_dept_tbl
    6           (
    7             my_dept_obj
    8             (
    9               10, my_emp_list(7839,7782)
   10             ),
   11             my_dept_obj
   12             (
   13               20, my_emp_list(7566,7369)
   14             )
   15           )
   16         ) t
   17      on e.deptno = t.deptno
   18     and e.empno in (select column_value from table(t.emp_list))
   19  /
  
       EMPNO ENAME  JOB              MGR HIREDATE         SAL        COM     DEPTNO
  ---------- ------ --------- ---------- --------- ---------- ---------- ----------
        7839 KING   PRESIDENT            17-NOV-81       5000          0         10
        7782 CLARK  MANAGER         7839 09-JUN-81       2450          0         10
        7566 JONES  MANAGER         7839 02-APR-81       2975          0         20
        7369 SMITH  CLERK           7902 02-APR-81       2975          0         20
  
  SQL> 
  

• How to pass the Satellite Pro A120 adapter?

  My laptop runs on the battery, but now it is only 3%.
  I get a message to pass to an electrical outlet? I don't know how to do this?
  The AC power led is off.

  Help! This is a new laptop.

  I really wonder about this question usually you must simply connect the adapter to the laptop and the device should automatically switch to the main supply and should begin to charge the battery.

  Have you tried to remove the battery and use the laptop with the power adapter? Check it!

  Maybe the power adapter is faulty?  :| ….
  In this case, you must contact the ASP in your country for a control. Probably, the adapter must be replaced.

  Good luck

• How to use the Satellite M500-ST5401 for mobile calls using Bluetooth

  Team,

  I would like to know more information about the bluetooth connectivity of a laptop for mobile phones bluetooth-enabled. My model is Toshiba Satellite M500-ST5401.

  What I'd like to meet, I have a Sony Ericsson mobile phone and it has bluetooth with A2DP function.

  Normally, if we have a headset stereo bluetooth
  Mobile can be coupled and listen to music using the bluetooth headset for music that plays on the mobile phone.

  The same that I feel every time I get a call on my phone, I would like to transfer the call to my laptop where I would use portable speaker to listen to the voice of the caller and the computer laptop microphone to answer the call of mobile, and then it will be supported by mobile phones.

  Please let me know if this is possible, I just want to hold the phone away from my hand and wanted to manage calls incoming and outgoing, sitting just in front of the computer using technology built into cell phones and mobile devices.

  Please recommend me what are all the driver software and the hardware must be installed to achieve this.

  Your response is much appreciated thanks in advance.

  You have already started a thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=181953
  Don t create different threads on a single theme to avoid misunderstandings!

• How to pass the partnership/affiliate reseller for Adobe Creative Cloud?

  The following steps from the Adobe to Ingram Micro team

  1. go to http://www.adobechanneltraining.com/#/login

  2. enter login information below, then click 'Sign Up '.

  a. user name:

  b. password:

  3. When you are prompted for a registration key - please re-enter the user name and password above and click on registration

  4. Enter the information necessary to create a connection to channel training and click on submit

  5. Once logged in, click on 'My training' and complete the training required below.

  a. creating cloud for accreditation teams (Lesson 1 and 2)

  6. once the training is complete - please log in www.adobe.com/partners to your membership level

  7. on the right side, find the tab "Your partnerships," then click on "become a Member more dealer.

  8. complete high-end ask the certified partner level and submit

  9 adobe will send you a confirmation email once approved as a certified partner - in general 1-2 working days.

  Unfortunately, I think these steps are old, because it seems that the site has changed.

  I have completed the steps all the way up to 5 (a) and can't seem to understand how to "improve dealer membership.

  I thought about it... There were two accounts associated with my business.  I was using the account that was not associated with the partner portal.  Once I got the credentials for this account, I was able to log on to the access portal "upgrading of affiliate reseller".

  I hope this help anyone who met the same problem as me.

• Satellite P300-1EI - is a second HARD drive possible?

  Hello

  Before to change the hard drive for more capacity, I would like to know if this laptop is capable of managing 2 hard drives?

  There are 2 places to a physical hard disk, use for the current HARD drive and the second is empty. The connection is present, but I don't know if it's usable? The coverage is also different, he did not use to put something in this space...
  If someone could give me some information about this second location?

  Thank you

  If you see a connector in the second HDD bay it is possible to use a second s HDD.
  Try it, but I think it should work.

  As far as I know for the Satellite P300-1EI you need a SATA 2.5 HARD.

• XP installs - ntdlr.dll missing on the Satellite P300-133

  We bought the satellite P300 with preinstalled Vista. It worked fine except for some major programs for hardware configuration in our society.

  So, we tried to install XP Professional on the primary partition that has been formatted before that. The blue screen where XP installs its files (after you have created the partition and formatting it) on the end to 99%, it says 'missing ntdlr.dll '.

  We first tought it has something to do with the SATA compatibility mode which we configured in the BIOS to cause driver AHCI missing on the XP CD. Then, we did a backup CD with nLite with the SATA drivers installed and run the AHCI mode.

  The same problem at the same point. I DIND'T try with another copy of XP but I know that it (a month old scratch free original CD) works very well because I installed it on another laptop front.

  The only thing that is strange od these partitions are mixed to the top. The partition where Vista was before is now D, it is also the reader where we tried to install XP, C is not the car with all the previous system backups and F it seams to be the Vista installation files.

  Please any suggestions, its very urgent
  We need this computer next week.

  Hello Peter

  Fun to read and I thank you for the reply.

  If you have any problems, post.

• Clock speed of the Radeon HD 4650 in the Satellite P300-23F

  Hi all!

  I am interested by the Satellite P300-23F because of its nice, these two drives huge CPU and - finally and above all - good price. But I can't estimate exactly its graphics performance, because I could not find information about the ATI Mobility Radeon HD 4650 used in this book's exact clock speeds.
  Did someone already has a P300-23F? If you do, could you please read the core and the memory clocks the GPU with a tool such as the CCC or GPU - Z? Perhaps you have also information about the temperatures of the CPU and HARD drive and also on the performance of the HARD drive?

  Thank you...

  Hello

  To be honest I m P300 owner but not the ATI Mobility Radeon HD 4650 is known as M96 ATI with DDR3 (1 GB) of graphics ram.
  I think that it s is not easy to say some details about the exact chip GPU clock speed because it of always different. It depends on the use of the laptop and the temperature.
  You must know that the performance of the GPU are controlled by the graphics driver and if the temperature increases to a critical level, that the pilot might slow down the chip so decreases the heat dissipation.

  The temperature of the processor and HARD drive depends on the use of the laptop too.
  If you run games high performance, then the temperature increases to a higher level and would be higher than the execution of only a few common tools such as MS Office Word for example.

  However maybe someone could put some values and details, it would be really interesting.

• Peripheral Bluetooth appears only not on the Satellite P300-11W

  Hello

  I just bought the Satellite P300-11W (Win Vista Prem) and tried for a weekend to set up the bluetooth device.

  I installed the BT-monitor for several times.
  I can't find my internal bluetooth device in Device Manager. Therefore, I can't use bluetooth.
  Who else has this problem? What can I do?

  Thank you.

  Hello

  In my opinion, your laptop supports BT
  Check the labels at the bottom of the unit.
  If your laptop model supports the internal BT module while there should be a label of BT.

  If you want to use the BT, he should be allowed first.
  Have you enabled the BT?

  Please check if the Fn + F8 key combination allows the BT and if a BT icon appears in the taskbar.

• How to pass the session IMAQ to the Subvi

  Hello

  My experience with LabView is neither very good nor extended. I am a scientist and I'm with IMAQ data acquisition. My current problem is that the people who wrote the script is modular, versatile, or clear initially structured. So I try to reduce the ridiculous number of tests in a simple flowchart to a level that people can actually understand it... and to make the more versatile script for future experiments.

  I'm introducing quite a few subVIs to be executed repeatedly. However, I can't know how to pass the IMAQ session on the Subvi. I constantly get the error messages. In this case, I want to acquire images with OIDE_CollectFrame.vi controlled by OIDE_TrialPhaseCollect.vi. I couldn't understand how to assign the refnum IMAQ session class, either.

  It is probably a newbie question, but usually I program with LabView.

  Dennis

  
  

• How to pass the value of the run-time file .sh by Oracle procedure

  I have a file test.sh that contain

  #1/bin/bash

  exp test/test@orcl file=/home/oracle/dump/test.dmp log=/home/oracle/dump/test.dmp grants = Y = index constraints Y = Y = (test) owner statistics = none

  Exit 0

  I craete a work called Create_job_proc in this work, I want to pass the value of job_action is the location of the file test.sh to

  /U01/home/Oracle/dump/test.sh and want to spend the test/test@orcl as a variable...

  Please suggest me... how to pass the value of Job_Action which will replace the .sh file content test/test@orcl to the value of the time of execution as scott/tiger@hr

  Thank you much Parth... It works perfectly...

  Thank you all for your help...

• How to pass the parameters or values film double hollow?

  Hello

  I create a game in Flash 8 with 2 AS and I have some questions to ask.

  First of all, I'm stuck for 2 days to create a tower Laser beam to the target.

  I searched the internet for solutions but I can't really find one, so I'll try display of questions myself...

  First I tried to create, and the effectHolder in which each laser beam has been created, because it seems I can create only one line in each movieClip...

  _root.duplicateMovie(effectHolder_mc , "effectHolder_" + this, _root.getNextHighestDepth());
  v = a = _root["effectHolder_" + this];
  ray.onEnterFrame = function() 
  {
  v.clear();
  v.lineStyle(1,0xFF0000,100);
  v.moveTo(this._x, this._y);
  v.lineTo(creep._x , creep._y);
  v.text = "True"
  }

  It's triggered eveytime, she was a target.

  With each turn that triggered a laser that I created, it became more than offset, so I tried selfdestructing after some time.

  this._alpha -= 10;
  if (this._alpha <= 0)
  {
       this.removeMovieClip();
  }

  But he did not actually work, so I tried another solution. I tried to give each MovieClip ("Laser"), duplicate code that creates the laser beam.

  onClipEvent(load)
  {
       this.fx = from._x;
       this.fy = from._y;
       this.tx = to._x;
       this.ty = to._y;
  }
  onClipEvent(enterframe)
  {
       _root.dmg.text = "From: " + fx + "," + fy + " To: " + tx + "," + ty; //I used this on a textbox to see if parameters are transmited. But they were all 'undefined'
          this.clear();
       this.lineStyle(1,0xFF0000,100);
       this.moveTo(from._x, from._y);
       this.lineTo(to._x , to._y);
  
       this._alpha -= 4; 
       if (this._alpha <= 0)
       {
            this.removeMovieClip();
       }
                                
  }

  The problem is that I did not know how to pass the coordinates of the tower and the target to the MovieClip so that it knows where to create the line.

  X++;
  duplicateMovieClip(_root.Laser, "Laser" + X, X,{from._x,from._y,to._x,to._y});          
  g = _root[_root.Laser + X];
  g.fx = from._x;
  g.fy = from._y;
  g.tx = to._x;
  g.ty = to._y;

  Please leave suggestions on how to send the parameters or values for the created clip, or an idea of the creation of this line ("beam") for each tower, without so much trolling.

  Thank you

  Chris

  What is the trigger of v's _alpha decrease?

• How to pass the name of the last target?

  var lastItem:string;

  If (lastItem! = e.currentTarget.name) {}

  Menu1.lastItem.gotoAndPlay ("S2");

  }

  lastItem is e.currentTarget.name;

  He doesn't like me using the string lastItem for the value of the previous currentTarget.name.

  How to pass the name of the last target?

  Yeh getChildByName returns a display object you need to perform a cast like this

  MovieClip (myMovieclip.getChildByName ("lastItem")) .gotoAndPlay (xx);

• How to pass the value of the variable record type in the procedure

  Hai All
  
  My Question is
  
  I have a table named Emp and the structure
  
  ID Varchar2 (25)
  
  Name varchar2 (25)
  
  Number of salary
  
  
  And now, I created a folder named Rec_Emp
  
  Like this
  
  Type Rec_emp is made
  (Rec_Id varchar2 (25),)
  rec_name varchar2 (25).
  Number of Rec_salary);
  rec_emp emp_record;
  
  
  I created a SQL type
  
  Now how to pass the value type in the procedure
  
  
  Thanks and greetings
  SrikkanthM

  You are looking for something like this

  create table my_emp (id integer, name varchar2(100), sal number)
  /
  create type my_emp_obj as object(id integer, name varchar2(100), sal number)
  /
  create or replace procedure insert_into_my_emp(pEmp_Obj in my_emp_obj)
  as
  begin
    insert into my_emp (id, name, sal) values(pEmp_obj.id, pEmp_Obj.name, pEmp_obj.sal);
  end;
  /
  begin
    insert_into_my_emp(my_emp_obj(1,'karthick',1000));
  end;
  /
  select * from my_emp
  /
  

• How to pass the value of the item Application Javascript function.

  Hello
  
  I have the JavaScript in the properties attribute of the HTML Form element
  
  I'm on page 1 and passing the value of the item page P1_DEPT_NO. It is perferctly working very well and I am able to get the exact value of the element on the page

  onchange="javascript:function1($x('P1_DEPT_NO').value);"

  I'm on page 1 and passing the value G_DEPT_NO of the Application element .
  The problem here is, I don't get the point of Application inside the javascript function value.
  I tried to use alert(); and it gives me the undefined value

  onchange="javascript:function1($x('G_DEPT_NO').value);"

  I just want to know, How to pass the value of the Application in Javascript element.
  
  Thank you
  Deepak

  Deepak,

  I'm not a Javascript expert, but the suggestin I did was because the javascript is a case-sensitive... language and thats why onChange is not the same thing as onchange.
  Not sure if this is causing the problem.

  Application elements not associated with a page and have therefore no properties user interface.
  So, as mentioned in another post, the rendering would not work for the elements of the application.
  If it is for a single item, used only on this page, you might create a hidden page element and use it fo your goal

  If you want to keep watching objects application and AJAX, this page contains examples of using AJAX to solve problems like the one you mentioned.
  http://www.Oracle.com/technology/OBE/hol08/apexweb20/ajax_otn.htm#T1B

  Thank you
  Rajesh.