How to print a really large image on a desktop printer?

Similar Questions

• How can I make a mirror image of my desktop hard drive and copy it to an external hard drive?

  * Original title: Mirror image

  How can I make a mirror image of my desktop hard drive and copy it to an external hard drive? I use Windows 7 Home Premium. Thanks in advance for your help.

  Blessings,

  Thomas

  The "how to Geek" has an excellent guide on how to do it. Check here: http://www.howtogeek.com/howto/4241/how-to-create-a-system-image-in-windows-7/

• How to I resize a larger image 72 DPI to the smaller image quality but of good size stick in the brochure

  Hi, I'm trying to resize a larger image from wide 16 cm saved at 72 dpi for a smaller image of wide from 5 cm to quality for the prompt for an art show I'm having. I think there a lot of information on the picture therefore it is great, I just want it condensed into a smaller image. If I adjust the size of 5 cm wide, it changes the dpi to 230 which would be better for printing (the 72 dpi is much too grainy). However when I stick it in the flyer that I do in photoshop it sticks like a massive picture. I then tried to drag the corners to make the right size and it became even longer than a 5cm wide 72 dpi image. I hope that makes sense for a person. So basically I need a large document size of 5cm that I can put in my small circular which is the best quality that I can do! Thanks in advance!

  What the PPI is the file that you are trying to drag in?

  You are able to view your office showing the two files... ?

  If you convert 16 cm/72 DPI image in the image of 5 cm/240ppi and then save. Then check the ppi with the flyer. If the flyer is still important with a low resolution will give you the cross between them so the magnified image of the ppi is displayed in big on the flyer paper.

• How can I make one large image on two pages in PAGES

  When I use the updated version of the Pages for Mac (Pages 09) I can see the pages side by side. However, when I put an image on the left page, I can't see it on the right page. Why not? I want to create a centerfold, if you will, with a picture on two pages. How can I do this? Thanks for your help!

  Pages ' 09 v4.3 offered face to face pages and Pages v5 (all versions) do not support this feature.

• How to remove lid on OfficeJet Pro 8600 for the digitization of large images

  I'm an artist wanting to analyze some of my larger images.  This is not possible unless I can remove the cover (or it opens and go completely flat) on my OfficeJet Pro 8600.  Please tell me if this is possible and, if so, how.  Thank you!

  Sorry, that the 8600 Officejet is not designed to have the cover removed for scanning.  There is a wire bundle between the ADF on the lid and the interns of printer below.

• How to print multiple images per page

  How to print multiple copies of a single image on a single page

  Duplicate the photo before you print it, and then select all copies, then use ⌘P to print the photo.

  To duplicate the photo select and enter the key ⌘D combination or use the menu entry "Image > Duplicate...» »

  

• How to print two images on one page?

  Can someone tell me how to print two or more images of the Photos app on a single page?  I often print on fabric and should be able to print multiple photos on a single sheet.  This would also work if I could place photos exactly an area of 8.5 "x 11".  Then I could simply make several passes with each photo in a different location.

  Early ' 08 IMac, El Capitan 10.11.2 improved IPhoto to Photos

  Select two ore more photos, and then press the combination of keys ⌘P

  In the print Panel, select cuts available and set the width and height of your photos.

  

• How can I resize a digital image using software of photo gallery to keep my digital images to be cut during printing on standard paper by a commercial processor? MP

  How can I resize a digital image using software of photo gallery to keep my digital images to be cut during printing on standard paper by a commercial processor? MP

  How can I resize a digital image using software of photo gallery to keep my digital images to be cut during printing on standard paper by a commercial processor? MP

  ====================================
  Sometimes the only resizing is not the answer because the
  the original size is different from the print size.

  You may need to crop photos to the size you want
  print to ensure that no clipping will occur. Cropping
  to a different aspect ratio will lose some parts of the picture but
  at least you have control over it.

  Windows Live Photo Gallery is a cropping tool.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to print several images in cs6

  How to print several images in cs6

  Hi Michaels,

  Please visit the following link: https://helpx.adobe.com/photoshop/using/print-photos-picture-package-layout.html

  Concerning

  Tanuj

• I recently bought two pictures for my youth group. When I looked behind them image is a larger image, but, when I downloaded it it's a smaller image. How can I get the enlarged image?      #93598775 & #18109349

  I recently bought two pictures for my youth group. When I looked behind them image is a larger image, but, when I downloaded it it's a smaller image. How can I get the enlarged image?

  #93598775 & #18109349

  Follow these steps: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  Hi jodepepevalentin,

  In the print menu, check "scale to fit media" under the Position and size of the device and then check out.

  If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.

  Kind regards

  Claes

• I try to print 4 x 6 photos.  How to print borderless on LR5 with my HP OfficeJet 7410?  Even in print in LR5 mode, my photographs show a border.  Setup page displays "without borders".  Image settings show "zoom to fill". But cannot print, or same prelif

  I try to print 4 x 6 photos.  How to print borderless on LR5 with my HP OfficeJet 7410?  Even in print in LR5 mode, my photographs show a border.  Setup page displays "without borders".  Image settings show "zoom to fill". But cannot print, or even listen to excerpts, without borders.

  What is your size of cell on in the print module? Cell size sliders must be completely to the right, and the margins should be set to 0.

• How to print photos when the display screen is white? The image is missing in it.

  How to print photos when the display screen is blank?  It shows only a white screen empty when I select the photo and press on print.

  You click on a film image in the print module? And, I guess you don't have to go to the Print module, right?  Additionally, make sure that you have chosen to make a custom package.  If you chose the custom package you need to drag and drop images and organize them.

• How to print the image in grayscale in the rich black?

  How to print the image in grayscale as PDF as black process only instead of CMYK?  I'm on FM10

  Ed,

  What file format you save the image in? It is important, as indicated by error. If you left it as a PSD, then FM performs a conversion to RGB. A TIFF or EPS file properly remains blank (i.e. on the plate of K). Other formats, such as PNG to grayscale are actually indexed color and solve RGB when FM creates the PDF file in the presence of plates of Spot and where the components are mapped to the CMY plates also.

  Here is a sample generated using SaveAsPDF with the CMYK option with the same 'gray levels' file saved in the format PNG, TIF and EPS in Photoshop (Note how the PNG isn't all there, on the plate K):

  

• How to rotate large images

  I tried the code for this article:

  http://supportforums.BlackBerry.com/T5/Java-development/rotate-and-scale-bitmaps/Ta-p/492524

  but it does not work for larger images like 1024 x 768 and rise IllegalArgumentAxception saying that the bitmap is too large.

  .

  OK, I did something that works for me, but is not perfect at all.

  It works well for images of 1024 x 768 and turns them but increases the size of the file (if save you them) for some reason any and loses brightness, but the quality is ok at least for the purposes of my application.

  Here's what I do:

  (1) I take a bitmap (1024 x 768) and create a new bitmap with 1024 x 1024 - width and height

  copy 2) old on the new

  (3) turn the new bitmap when you rotate a matrix size NxN and return a new bitmap rotated

  (4) create a new bitmap to the tour final, but cut the part added so that you get an image size of 768 x 1024

  Here's the code. It could be optimized again especially in the rotateSquareImage() method where you can work with arrays of regular tables not 2d.

  package com.melonmobile.blackberry.pdfscanner.screens;
  
  import net.rim.device.api.system.Bitmap;
  
  public class ImageRotator {
  
      public Bitmap rotate(Bitmap oldImage) throws Exception {
          int w = oldImage.getWidth();
          int h = oldImage.getHeight();
          int d = Math.max(w, h);
          int amountPxAdded = 0;
          if (w > h) {
              amountPxAdded = w - h;
          }
          Bitmap oldBitmapSquared = new Bitmap(d, d);
          int[] data = new int[w * h];
          oldImage.getARGB(data, 0, w, 0, 0, w, h);
          oldBitmapSquared.setARGB(data, 0, w, 0, 0, w, h);
          Bitmap finalRes = new Bitmap(h, w);
          int fW = finalRes.getWidth();
          int fH = finalRes.getHeight();
          oldImage = null;
          Bitmap rotated = rotateSquareImage(oldBitmapSquared, 90);
          oldBitmapSquared = null;
          data = new int[fW * fH];
          rotated.getARGB(data, 0, fW, amountPxAdded, 0, fW, fH);
          rotated = null;
          finalRes.setARGB(data, 0, fW, 0, 0, fW, fH);
          return finalRes;
      }
  
      private Bitmap rotateSquareImage(Bitmap oldB, int angle) throws Exception {
          int w = oldB.getWidth();
          int h = oldB.getHeight();
          Bitmap newB = new Bitmap(w, h);
          int[] oldD = new int[w * h];
          int[] newD = new int[w * h];
          oldB.getARGB(oldD, 0, w, 0, 0, w, h);
          int[][] old2d = new int[h][w];
          int[] js;
          int old2dLen = old2d.length;
          int jsLen;
          for (int i = 0; i < old2dLen; i++) {
              js = old2d[i];
              jsLen = js.length;
              for (int j = 0; j < jsLen; j++) {
                  js[j] = oldD[i * w + j];
              }
          }
          int[][] rotated = new int[h][w];
          for (int i = 0; i < h; ++i) {
              for (int j = 0; j < w; ++j) {
                  rotated[i][j] = old2d[h - j - 1][i];
              }
          }
          old2d = null;
          for (int i = 0; i < h; ++i) {
              for (int j = 0; j < w; ++j) {
                  newD[i * w + j] = rotated[i][j];
              }
          }
          rotated = null;
          newB.setARGB(newD, 0, w, 0, 0, w, h);
          return newB;
      }
  }
  

  If someone decides to improve Please publish an improved version, so it could be used by more people.