How to program a remote adjustent with a Laser sensor and a pressure valve
Hallo,
I'm looking for a solution set a monostable pneumatic cylinder via a laser sensor and a pressure valve.
The Laser sensor and the valve has a domain controller as a signal input/output. The position of the cylinder is controlled by the laser sensor and pressure valve schould adjust pressure as needed to get the cylinder into position.
Sample:
The cylinder schould be 5mm extended from the initial position. If a team is on the stem of the actuator pressure valve schould be able to increase the pressure in the cylinder so that the location of Rod 5mm remains approximately constant.
Thank you for a few suggenstions!
Kind regards
Manual
I guess you could use a system by which the laser sensor output when it receives the laser beam.
Something like this:
Laser has detected ==> move in the first direction
Laser (later) has detected ==> move in the other direction
Laser (later) has detected ==> move in the first direction
..........
So that it switches between two States.
Or if it is possible, you could just output intensities different laser to represent different values.
You could get the signal valve dc, translate to a numeric value, set a threshold (or an upper and lower threshold could be better) where the system is stable and doing some codes to ensure that the valve maintains the pressure inside the threshold.
The rest I think is too deep, and I guess it's to you from there
See you soon
David
Tags: NI Software
Similar Questions
-
How to program my favorites on my Microsoft Laser 5000 keyboard keys?
How to program my favorites on my Microsoft Laser 5000 keyboard keys?
Have you had a look at the product guide?
http://www.Microsoft.com/hardware/en-us/p/wireless-comfort-desktop-5000#support
All the information you are looking for should be guide on the product. If you can program your favorite keys, product guide should show you how.
-
How do I burn a cd with windows media player and have not any second 3 breaks inbetween the songs?
In the following FAQ... scroll to the bottom for...:
"Why are there gaps sometimes long between songs on the CD I burn?Windows Vista - burn a CD or DVD in Windows Media Player:
Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questionsThe free software CDBurnerXP has an option to burn a
CD music with or without addition of gaps.(if the audio has static air at the beginning or at the end...
which will need to be deleted manually with an audio
Editor-in-Chief).(FWIW) It's always a good idea to create a system
Restore point before installing software or updates)CDBurnerXP
http://www.CDBurnerXP.se/
(Yes, it works on XP, Vista, 7)CDBurnerXP to make Audio disc
http://CDBurnerXP.se/help/audio/compileaudio -
How to start my subscription abroad with the foreign language and writing unknown?
How to start my subscription abroad with the foreign language and writing unknown?
These can also be useful:
FAQ: Is creative cloud available in my country?
FAQ: Why my purchase showing the wrong currency?
FAQ: How can I view Adobe web pages in another language?
FAQ: How can I change the country associated with my Adobe ID?
FAQ: How can I change the language that appears in my creative cloud app?
-
How to program my remote to work with a Bose Solo?
I can't get it work using the typical method. Help!
So I called Apple and they tell me that a Solo of Bose 10 is not compatible with the new AppleTV. I don't know that I think that recital was compatible with the old AppleTV. Anyone has an idea on how to program the Apple TV remote to control the volume of the Bose Solo 10? Thanks in advance.
-
How to create the dual boot with Red Hat Linux and Vista on Satellite A200
Hi all!
I have a Satellite A200 pre-installed with vista home premium and I would install another OS that is Red Hat Linux Fedora Core 7.
Can someone advice me how do? I'll be very grateful to receive your answers. Thanks again!Well, I put t use this Linux distro on my laptop but I used the Knoppix Live CD and it was very easy.
It was not necessary to install anything. I simply booted from the Live CD and I could use the full Linux operating system.So, it might be better to use this Linux live CD instead of the complete installation.
I think that the main problem would be available to the driver.
The fact is that Toshiba does not support Linux on laptops and so Linux drivers are not available. -
How can I move the 'blue bar' with the start option and the clock and icons on the left side of the screen to the bottom of the screen. It's happened before and I forgot how to move.
Hello pookprec
.
-
How to FORMAT my hard drive with a RECOVERY PARTITION and my system restore from. BKF files
History made as short as possible.
I inherited a gateway with XP Media Center 2004. I transferred all my old files to the new computer, and it worked fine. I did a full backup of the system (.) BKF). Later, I installed a disc for my Vivitar camera I used before with my old system and my computer crashed.
I tried everything I know to do a restore. F8, F10 and F11 during start-up and the best I could come up with was the safe MODE, but it would fail to any ENTRY.
I really feel like the hard disk must be formatted and start over. I can not access the recovery partition and no XP CD was provided.
My question is: How can I reformat the hard drive with a petition of recovery and reinstall my operating system of BKF files?
If you have a recovery partition, I suggest you post in the forums of the bridgeassistance.Another option is the following:http://tips.vlaurie.com/2006/05/recovery-console-for-those-without-an-XP-disk/"luckyone_27105" wrote in messageNews: 720fbbc2-6fb9-4fd7-9411-bdd1ec89b144...> A long history made as short as possible.>> I inherited a gateway with XP Media Center 2004. I transferred all my old> files to the new computer and it worked fine. I did a full backup of the system> (. BKF). Later, I installed a disc for my Vivitar camera I used> before with my old system and my computer crashed.>> I have tried everything I know to do a restore. F8, F10, and F11> during startup and the best I could come up with safe MODE, but it would be> not allow any INPUT.>> I really feel like the hard disk must be formatted and start over. I have> unable to access the recovery partition and no XP CD was provided.>> My question is: How can I reformat the hard drive with a petition of recovery> and reinstall my operating system of BKF files?> -
How can I add a form with the user name and password
I would like to add a registration form with the user name and password. Are there any embedded html or widget for this
Hello
Here you will find a similar description:
https://forums.Adobe.com/message/6078030
https://forums.Adobe.com/message/6141887
Thank you
Sanjit
-
I want to send one second pulse 2 to the counter when a user has pressed a button. I used to generate the pulse code assist DAX. How do I code the case structure so that it will run the case once (send a shock to the meter) and then returned the switch to OFF? I have included the code that I currently have.
Just change the mechanical action (i.e. latch when released). Just like the stop button.
-
How to control a Mac mini with HDMI ports fries and lightning? (The rest is ok)
Recently, a lightning strike fried video output (HDMI and lightning) ports on my Mac Mini end of 2012. As far as I know, the rest of the machine works fine. It's just blind. I can't have everyone working on this, but I don't want to throw a perfectly (well, almost perfectly) computer works.
If I can get a control over the Mac Mini for a few days, I could set up as a dedicated time Machine or maybe even an iTunes or media Server. How can I achieve this?
Configure the screen sharing on the Mac.
To do this, you must have another recent Mac.
You can start the problem Mac in target disk mode, connect the two Mac by FireWire or Thunderbolt, boot the Mac problem with button down T, boot the first Mac since the Mac HD problem and sharing Setup screen
http://www.macissues.com/2014/05/07/how-to-set-up-and-use-screen-sharing-in-OS-x /.
http://www.TechRadar.com/us/news/computing/Apple/how-to-use-screen-sharing-in-Ma c-os-x-1296285
Alternatively, you can take the drive out of the Mac problem and start another Mac that and configure sharing screen.
You can also get a USB video card and put in place by the target disk mode or by removing the similar disk for screen sharing
-
How can I work around 'backup mode printing' and 'drying page '. ? Printing is MUCH too slow
Yes the gray photo cartridge missing
Hi @carp04
To work around "printing in rescue mode" ensure that all cartridges are installed and no are exhausted.
With respect to the drying of the page, change the print settings might help; Definitions of setting for the printer driver.
-
Hello *.
actually, I'm trying to track down and identify serious problems of STP loop to my switch tree SG300-xy.
For further investigation, I would use the CLI debug mode but unfortunately the
debugging
debug mode command is password protected. I always "DEBUG password: *" :-((
Could someone please help with the password of the SG300-xy switches with 1.3.0.62 firmware debugging it please?
Thank you very much in advance for your help and your response!
Best regards
MatthiasHi Matthias, debugging is to engineer end only, it has no practical use.
Also, if you are unable to go to the debug console, it is unsupported.
I don't know how you can have a loop spanning trees like the tree covering weight stops redundant links. So I think that you are either using BPMH and incorrectly labeled regions or added a vlan incorrect or these switches connect in a device that is not active PLEASE and causing the transfer of issues like that.
Quite honestly if you have a loop of network which is so bad, the best thing to do is to unplug the 1 wire at a time until you see what link has caused.
-Tom
Please mark replied messages useful -
How the program REDOWNLOAD SHREDDER64. MSI? Windows 7 and HP 4620 all-in-One Printer
I have to clean programs unused and deleted the Shredder4.msi, which I just found out that I must have to operate properly the functions of my
4620 all-in-One Priner/Fax/Scanner HP.
I looked and looked and can't find the program to reinstall.
I would appreciate any direction that could help me in this company?
Kind regards
Judy
* E-mail address is removed from the privacy * or
E-mail address is removed from the privacy *.
I recommend that you check with HP.
You still have the CD that came with the printer?
It is suitable for this topic.
Edit: You have an ACER computer?
They have a preinstalled by Egistec shredder program.
-
How to create a dynamic multilingual with liquid Web site and web apps
In the thread
that part of my problem is resolved.I created a list web app that contains several fields from the data source.
These data source fields have multiple values where the customer has to choose the value of (i) there is. That is to say place: sea front area rural, etc., etc.
These values must be translated from English into Dutch.
So, how do I build my Web page with a liquid markup custom c.q. of entry?
Thanks for any help.
Kind regards
Carla
Hi Carla,.
You have many options at your disposal with the liquid, so with the datasource_id of the original web application, you can call another Web application referencing this ID to get the information you need and collect the data in a collection or display in a custom template (.tpl) file.
Here is an example. Inside of your application model web detail.html
With the help of a collection:
{module_webapps id = "3rdPartyWebApp" filter = "item" itemId = '{{dataSourceID}}' collection 'webAppData' =' model = '}
{{webAppData.items [0] .description}}With the help of a model:
{module_webapps id = "3rdPartyWebApp" filter = "item" itemId = "{{dataSourceID}}" template = "display_webapp_description.tpl"}... display_webapp_description.tpl content:
{{description}}
You should be good to go.
Maybe you are looking for
-
HP Pavilion DV7 Entertainment Notebook PC - compatible hard disks 5004tx
Hello One of the 2 installed Toshiba 750 GB hard drive failed and I'm looking to replace the two HDs with a better spec'd and more large hard drive that is compatible with this model. The Toshiba HDs were slow and sometimes problematic if looking for
-
Qosmio G20: After reinstallation of the BT stack everything works fine
Hello I installed the BT stack and everything worked fine.However, after restarting my pc (G20) it wouldn't work.I had to reinstall (& restart) to make it work againFrédéric
-
HP ENVY notebook - 15 t-q400 CT: contextual menus folder disappear so fast
Hello yesterday, I received my HPenvy. Now seems a problem with the touchpad, I see a little, but the main issue that I am facing is with its touchpad. For example, when you use the touch pad to navigate menus menu popup Explorer windows disappears o
-
Image IMAQdx capture and record
Hello: I'm trying to enter and save an image from a USB webcam to a frequency of apprximately 1 Hz. I would like to be able to adjust it upwards or downwards slightly, but don't have to adjust significantly. Some indication of time with the image wou
-
Display upside down, how do I get back to normal
My screen is upside down. Is it possible to return to normal?