How to protect the files in the USB port?

Similar Questions

• How to activate the USB Port on Satellite Pro 440 cdt?

  Hello
  I have the old satellite pro 440 cdt and my problem is the USB Port.

  How can I activate the USB Port?

  Thank you

  Hello

  Without any explanation and comments?

• How to disable the USB port and change DVD drive to read-only?

  I have upgraded my Vista Home Premium from window to window 7 Ultimatum. I tried to disable the USB port and and change the configuration of DVD room to read only via the bios, but I wasn't able to do. The bios always the same, whether it was when I had vista.

  I wonder if the operating system upgrade from Vista home premium to Windows 7 ultimate trigger necessarily upgrading the bios in order to take full advantage of the Windows 7?

  Thank you

  * original title - upgrade from Vista home premium to Windows 7 ultimate necessarily triggers upgrading the bios in order to take full advantage of window 7? *

  rThen your question isn't specific to Windows 7, you must consult the manufacturer. You should be able to disable the USB via the BIOS ports. Also, why do you want to set the optical drive as read only? If it is shared? If so, the advanced sharing disk properties, from there, you can set permissions on the drive. If you releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• How to check the usb ports have enough voltage

  Hello
  I have a dell vostro 3500
  I think my usb ports does not receive enough voltage, because sometimes my usb ports does not work and there is no software problem I checked it
  How could I check that?
  I test my system with hwmonitor, but can not understand anything
  It comes to hwmonitor report on my system
  http://20-up.IR/images/l6ffkm1a9s8xsnbjht.PNG

  Thank you

  Hi Hossein,

  Thank you for your response.

  Check out the following link.

  Code 43: Windows has stopped this device because it has reported problems.

  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = WS.10) .aspx

  I hope this helps.

• HOW TO REPAIR THE USB PORT LEFT OF MY LAPTOP TOSHIBA THAT NO LONGER WORKS

  THE LEFT USB PORT DOESN'T WORK ANYMORE? WHAT TO DO

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How do I transfer files to my usb port on 64 GB sandisk

  Please help me "How do I transfer files to my 64 GB sandisk USB Port

  We sat, 21 oct 2012 21:11:59 + 0000, BienvenidoOng wrote:

  Please help me "How do I transfer files to my 64 GB sandisk USB Port

  You simply copy the files where they are on your
  hard drive to the flash drive. The process is exactly the same as
  copy data to another HDD or a place on a
  hard drive to another location.

  There is more than one way to do it, but the two most common are
  "copy / paste" and "drag and drop". If you do not know how
  These, after return for more information.
  Ken Blake, Microsoft MVP

• How can I disable or block my USB port to prevent access to removable devices?

  Hello

  I want to disable/block my USB port so that no one can insert any USB device like a USB, USB sticks, disks etc. Is it possible to do? Is it possible to password protect my USB port? Help, please. Thank you.

  Hello

  I want to disable/block my USB port so that no one can insert any USB device like a USB, USB sticks, disks etc. Is it possible to do? Is it possible to password protect my USB port? Help, please. Thank you.

  Try the following steps to block usb ports
  How to disable the USB Ports?

• How to protect the files on the computer when you connect to a WiFi hotspot?

  If I have internet access in the coffee-shop, they provide Wi - Fi service,

  Referring to a following linked picture, I have always to deselect file and print sharing for my network setting the option,

  It will be safe enough protect anyone taking any file in Notepad?

  Thanks in advance for your suggestions

  http://www.terryscomputertips.com/images/file-and-printer-sharing_2.jpg

  Original title: how to protect your files by free Wi Fi?

  Hi oem7110a,

  Thanks for posting your query in the Microsoft Community. It seems that you have a problem with the protection of your files in a wireless hotspot. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

  Method-

  I would have you look at the article-

  A Wi - Fi connection: 8 tips for working safely wireless hot spots

  http://www.Microsoft.com/atwork/remotely/hotspots.aspx#fBid=X51tFoD9rGf

  We know if you need help. We will be happy to help you.

  Thank you.

• AS3 how can you detect if someone shoots their camera into the USB port?

  In AS3 if the SWF Gets a hold of the camera of someone successfully and they begin streaming video everywhere and everything, but then halfway, either they wiggle accidentally their camera into the USB port, or the camera just sort breaks down, or something like that, how can detect you on the user side?  I tried using event listeners and different variables of Mark also every five seconds, but none worked. any of the public properties of the camera or its events seem to be acting funny of all when something happens like that.  And apparently you can just keep analysis the computer for devices (for a good reason, I suppose).

  Is there something I'm missing here?  Is it possible to detect the copy of a user of a SWF file (PF or AIR, but much more important still FP) when their camera has effectively stopped as the result of something goes wrong, like them what she wiggling the computer by mistake?  If so, how?  Thank you!

  Run your code and disconnect your camera. What are the common properties of it? Stop your flow? To return only a framework of specific color? These things can be used to detect, but you are right when you say that you can not detect more than a loss of packets from a NetStream object.

• How to get the USB device in the list in the resource name field VISA VISA Open VI

  I followed the tutorial below to connect with my camera using the USB port. But I don't have the name of the USB port able & Automation Explorer list devices. How to get it? Can anyone suggest something?

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  Hi kimhyun,

  I tried this. But managed. I used the USB as my sugesstion to device.my USB is that you unplug your device at any point of your work. Check that the device is properly connected. IF your system has recognized your device, you can view the device in Control Panel > Device Manager > then open your particular device from the list of the connected device then details > description of the system > hardware ID > then you can find here the code from your provider.

  Try this. I think that your device is connected to loosen. What USB device you are using? Also, you must install THE DRIVER FOR YOUR USB DEVICE.

  Good luck

• How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

  Orifginal title: Aggrevation

  How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

  Hi ElginCarelock,

  You can try to restart the computer and check.

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer and check.

  Hope this information is useful.

• How to access the USB secure key on windows vista, I get the message that application 10004 could not find any JumpDrive Secure device connected to your system

  Original title: how access key USB secure Windows vista

  I have a lexar player sure to jump that I used with an old computer that has Windows XP.  I now have a new computer with Windows Vista and I can't access the secure part of the USB key.  When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".

  Of course, the USB key is inserted into the USB port.  If anyone can help find me a way to access the part secure the USB key I would appreciate it.  Thank you.

  Hi Jon0909,

  The error that you received can be for several reasons. I suggest you try the following steps:

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving problems of USB devices

  Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.

  (a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.

  (b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.

  If the problem persists, you can contact the manufacturer of the device for any known issues
  http://www.Lexar.com/support

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to assign a constant name 'letter' to the USB port?

  My Compaq Presario with Windows 7 has two USB ports on the front and on the back.  I use both to the front to connect a drive hard ext to the back, usb flash drives and a camera. Everytime Iplug in the disk hard ext, the PC assigns a letter to port such as J.  The next time I plug the camera into the same port, the PC gives it a different letter and I need to go back up and reconfigre Norton where to back up.  How to assign a constant name 'letter' to the USB port?

  I think that the previous answer may have been cut off, but they were right. You assign it a letter on the USB port, you assign a letter to the device. With your drive plugged, if you right-click on the computer icon and select manage you will arrive at the computer management screen. Click the disk management icon and you should see your drive listed. Right click on that and you should see a choice to change the drive letter and path. From there, click change and select a drive letter for your device.

• How to read the data in a device connected to the usb port

  Is there a class or object, or the piece of code in Java that is comparable to the PDQComm32.ocx and the mscomm32.ocx used in VB6? I need to know how to read the data of a device plugged into the usb port of the BBerry. Is it possible to use the BB to read data from a device via a usb cable?

  I'm new in Java and I'm looking for the opportunity to write a project to read the data in a device with this program that can turn on a BB instead of on a pc.

  Thank you

  Did you watch net.rim.device.api.system.USBPort?

  That's what the doc says:

  Provides access to the USB port of the device.

  Avoid using this class in applications, as it is not portable. On the contrary, if you need to access the USB port, use factory CLDC Connector to serve a connection.

  Rab

• How can I use the USB ports in Windows XP Mode?

  Windows XP mode

  I need to use the USB port, but are not available in Windows XP mode, how do they available?

  Thanks, I need an answer soon.

  Plug the USB device, click the USB menu

  Click Attach device.

  Please wait while this one is initialized.