How to check the usb ports have enough voltage

Similar Questions

• How to activate the USB Port on Satellite Pro 440 cdt?

  Hello
  I have the old satellite pro 440 cdt and my problem is the USB Port.

  How can I activate the USB Port?

  Thank you

  Hello

  Without any explanation and comments?

• How to disable the USB port and change DVD drive to read-only?

  I have upgraded my Vista Home Premium from window to window 7 Ultimatum. I tried to disable the USB port and and change the configuration of DVD room to read only via the bios, but I wasn't able to do. The bios always the same, whether it was when I had vista.

  I wonder if the operating system upgrade from Vista home premium to Windows 7 ultimate trigger necessarily upgrading the bios in order to take full advantage of the Windows 7?

  Thank you

  * original title - upgrade from Vista home premium to Windows 7 ultimate necessarily triggers upgrading the bios in order to take full advantage of window 7? *

  rThen your question isn't specific to Windows 7, you must consult the manufacturer. You should be able to disable the USB via the BIOS ports. Also, why do you want to set the optical drive as read only? If it is shared? If so, the advanced sharing disk properties, from there, you can set permissions on the drive. If you releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• HOW TO REPAIR THE USB PORT LEFT OF MY LAPTOP TOSHIBA THAT NO LONGER WORKS

  THE LEFT USB PORT DOESN'T WORK ANYMORE? WHAT TO DO

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to check the text block have overflow?

  I am using the code below, the wrong see the text frame have more flow

  Content UIDRef = pageItems. GetRef (i) ;

  InterfacePtr<IGraphicFrameData> graphicFrameData (content, UseDefaultIID());

  UIDRef storyUIDRef is a helper. GetTextModelRef (graphicFrameData);

  InterfacePtr<ITextModel> TheTextModel (storyUIDRef, UseDefaultIID());

  Executives InterfacePtr<IFrameList> (TheTextModel->QueryFrameList());

  Utils<ITextUtils> tUtil;

  bool16 overSetted is tUtil->IsOverset(executives);.

  and also I try to use

  TextFrameColumn InterfacePtr < ITextFrameColumn > (chassis-> QueryNthFrame (0));

  bool16 overSetted = IsTextFrameOverset (textFrameColumn); tUtil-> IsOverset (Frames);

  I manually changed QueryNthFrame (.), the wrong see the text frame have more flow.

  Someone help me, above question.

  You will need to recompose all frames.

  Try,

  InterfacePtr frameListComposer (frameList, UseDefaultIID());

  If (! frameListComposer) break;

  frameListComposer-> RecomposeThruLastFrame();

  isOverset bool16 is Utils()-> IsOverset (frameList);.

• SQosmio G50 - 10 H - one of the usb ports stopped working

  Hello forum,.

  I have a BOUNCING problem with usb ports on my qosmio g50-10 h.
  There are two ports on the right side of the machine and I have 2 self-powered 7 centers of port (usb 2) attached to these.

  Every now and then to stop it from ports and of course all the parts a unregcognised, not found.
  I get error messages saying unregognised device or usb device stopped working or windows stopped device etc.

  Unplug the hub and repluging it ususally actually come back to life.

  any ideas?

  Stafford

  Hello

  Have you tried to connect devices directly to the USB port?
  Try this and see if the USB device is disconnected, as you mentioned that using the external USB hub.

  Generally speaking, it is difficult to say what might cause this
  You could try updating the chipset driver.
  Of course, you should also check the USB port settings, and power management options for economy.

  In device manager-> USB root & hub-> properties you could disable for unique energy saving USB ports.
  This also on Win 7 power management.

• USB ports still under voltage after power off

  Hi, I use a sleekbook of 6-1260ez want on Win8 x 86. After I power the system off, the USB ports have always power. The wired mouse LED is still. In addition, the laptop batteries are drained after 2 or 3 days without being plugged in, although the power is off.

  I installed the latest chipset drivers. the option "Scan now" on your support page is not find old drivers. What can I do? Is this a warranty case?

  P.S. This thread has been moved from the Notebook - HP ProBook ZBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE for laptops - pavilions, Presario. -Hp moderator of the Forum

  This computer has a usb 2.0 support. That so you can recharge your cell phone or your mp3 player with the computer turned off. I found and read the manual of the computer.  That is why your mouse is always on.  Then you'll have to unplug the mouse when you're not using it. I hope help you.

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

  Orifginal title: Aggrevation

  How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

  Hi ElginCarelock,

  You can try to restart the computer and check.

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer and check.

  Hope this information is useful.

• How to assign a constant name 'letter' to the USB port?

  My Compaq Presario with Windows 7 has two USB ports on the front and on the back.  I use both to the front to connect a drive hard ext to the back, usb flash drives and a camera. Everytime Iplug in the disk hard ext, the PC assigns a letter to port such as J.  The next time I plug the camera into the same port, the PC gives it a different letter and I need to go back up and reconfigre Norton where to back up.  How to assign a constant name 'letter' to the USB port?

  I think that the previous answer may have been cut off, but they were right. You assign it a letter on the USB port, you assign a letter to the device. With your drive plugged, if you right-click on the computer icon and select manage you will arrive at the computer management screen. Click the disk management icon and you should see your drive listed. Right click on that and you should see a choice to change the drive letter and path. From there, click change and select a drive letter for your device.

• How to fix my usb ports? Not correctly recognize the iPod and other devices of storage correctly.

  I had problems with getting my iPod classic 6th generation to be recognized by my computer windows 7.  It works very well but all of a sudden stopped working.  When I connect the iPod, it says on the product than its 'connected' and is in charge, but does not appear on "my computer" or on iTunes.  Now, I supposed that it was a problem with my apple product, but after putting in the store and plug both Mac and PCs, this worked fine, its clear that it is actually a problem with my specific PC.
  All software are up to date and I tried stop and start the unit. (Control Panel > administrative tools > services > device mobile apple).  The PC also recognizes the iPod randomly once in a while and I managed to restore the iPod to factory settings to ensure that there is no problem with the device itself.

  As stated earlier that the iPod is not visible in 'my computer', but when "devices and printers", there are two elements relating to the iPod, appearing almost as if it's two separate devices. the first is "apple ipod usb device" on the devices section and "Apple mobile device USB driver" in the section not specified.  When I click the first device it freezes the computer for awhile.
  I tried to move the ipod to different USB ports that make no difference.  However, when I put in a pen memory USB (TDK 4 GB), it initially also put it in unspecified, but with a yellow warning down logo on the left and when I moved my wireless usb key for my keyboard, it didn't work initially.  These two seem to have resolved themselves in Device Manager...

  In my view, there is a problem with my usb ports grateful drivers. Any idea what I need to do?

  Hello

  Thanks to community Microsoft can help you with your concern for Windows!

  You are facing problems with the USB ports on the computer.

  Method 1:

  Run the troubleshooter of material and check what is happening.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Method 3:

  You can update the driver from chipset from the web site of the manufacturer and then uninstall and reinstall the device driver updated from the web site of the manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, or you need help on Windows please keep us informed.

  We will be happy to help you!

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• I have osx imac 10.9.5 version and can't use iCloud told me to go to the yosmite should I do this and how do I know if I have enough memory and it won't slow down my computer

  I have osx imac 10.9.5 version and can't use iCloud told me to go to the yosmite should I do this and how do I know if I have enough memory and it won't slow down my computer

  If your iMac can run a newer operating system, it will not let you install. Where possible keep updated for better security.

• For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  When did this problem start? What did you change shortly before it all began?

  Please quote the exact text of the message you get, verbatim.

• How to read the data in a device connected to the usb port

  Is there a class or object, or the piece of code in Java that is comparable to the PDQComm32.ocx and the mscomm32.ocx used in VB6? I need to know how to read the data of a device plugged into the usb port of the BBerry. Is it possible to use the BB to read data from a device via a usb cable?

  I'm new in Java and I'm looking for the opportunity to write a project to read the data in a device with this program that can turn on a BB instead of on a pc.

  Thank you

  Did you watch net.rim.device.api.system.USBPort?

  That's what the doc says:

  Provides access to the USB port of the device.

  Avoid using this class in applications, as it is not portable. On the contrary, if you need to access the USB port, use factory CLDC Connector to serve a connection.

  Rab