How to query Oracle, MySQL and MSSQL data?

Similar Questions

• How to move Oracle APPS 12 configuration data to the new environment of production of 12 APPS

  Dear all
  
  I need to know, how we can move from Oracle APPS 12 configuration data to the new environment of production of 12 APPS? What is the safe and easy way, we do not want to make the new facility of 12 APPS and reinstalling things...
  
  see you soon

  Hello

  The scenario above is correct and should work fine. Make sure that the central source and instances of the target are the same patch upgraded.

  Kind regards
  Hussein

• How to hack oracle not checking stored data while running change order pk

  Hi all
  
  Due to I change pk at table, but this table contains many rows (10 billion).
  If I use normal change control, Oracle must to check every row to make sure it is uniuqe.
  This method must use many times (at least 60 days) up to doing just that.
  
  How can I pass this method of verification? and I'm sure that the data of all lines (colume be pk) are uniuqe.
  Are there any ideas on this?
  
  Very thanks.
  My Oracle is Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production.

  Hi and welcome to the forum,

  How can I pass this method of verification? and I'm sure that the data of all lines (colume be pk) are uniuqe.

  By the way these controls probably don't not sovle your problem - it depends on...

  How things look like now? That it supports the current as PK, what is the index?

  How do you change?

  Please post more details, than in real States, not only words.

  Concerning
  Peter

• How to get the Organizer"and"Accepted"data from a BlackBerryEvent

  Hi all

  -J' I send an invitation to the device of BB from Outlook
  -Once received, accept the appt to the BB email application

  When I view the appointment in the native calendar of BB, I can see the "Organizer" fields and "accepted."

  How can we get these data "Organizer" and "Accepted" to a BlackBerryEvent we will get only the PARTICIPANTSin an event.

  Using String email is event.getString(BlackBerryEvent.ATTENDEES,i);.

  any help in this please.

  Thank you

  Gerard

  No, you can get a list of the names of the participants, but not their status.

• How do you derive speed and acceleration data position?

  Hello

  We are working on a project that requires data of distance, speed and acceleration over time.  We use the NI 9234 compactDAQ chassis connected to an accelerometer.  The accelerometer is attached to a topic plastic cantilevered (rectangular) which is "gathered" - a bit like a ruler on the edge of a table hanging like a diving board.  We will gain about 2 k samples/sec.  There is no problem getting the acceleration data, it is transformed in speed and distance, which is the problem.  There is a link OR a solution (http://decibel.ni.com/content/docs/DOC-4308, see below), but it does not work.  I remember in my class of calculation that you integrate acceleration to get the speed, you integrate the speed to get remotely.

  

  This gives us the following graphs:

  

  Acceleration seems good, of course.  But the speed looks like it is a sinusoidal signal riding on a curve that dips down and then decreases exponentially.  (This dip and decomposition looks like the answer to an excessive vibration.)  I expected to be similar to the acceleration, speed, but out of phase 90 degrees (symmetrical relative to the origin).

  And we want the position and not remotely.  Position would also be a sine wave exponentially decaying.

  So, what math should apply?

  Thanks in advance,

  Shadowfeld

  Hello

  Conversion acceleration in the speed/movement or movement speed requires the digital integration. In LabVIEW, you can take the accelerometer measures and represent this signal in acceleration, speed or movement by running the example VI (Figure 1) included in the next tutorial for area Developer:

  1 excerpts from acceleration, speed and displacement signal processing: http://zone.ni.com/devzone/cda/tut/p/id/4989

  Best regards

  M Ali

  Technical sales engineer

  National Instruments

• How can breakdown of current and lost data, I get it back?

  After power failure... I lost a lot of data... What should I do to restore it?

  Hello mohammadbatta,

  Please see the link below.  I hope this can help.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/how-to-recover-lost-data/e93af496-57EC-411c-82c7-438543acf40d

  Thank you

• How to save the old and new data

  Hello...
  
  I want to create a table that works even the concept of the Audit table.
  I want my table to be updated with the two old values n new values when a change is made.
  
  It is possible to do with it, using the features of audit table.
  
  Suppose that a user changes more than paid my table must capture the areas where changes are
  
  fact...
  
  I would also like to record the IP address of the specific system where is made the change/remove. How to get the ip address of the client system.
  
  My table structure
  
  Number of Sr_no
  DateTime varchar2 (15)
  VARCHAR2 (20) user_name
  TableName varchar2 (20)
  operation varchar2 (6)
  ip_address varchar2 (15)
  old_data varchar2 (20)
  you see varchar2 (20)
  
  
  Thanks in advance...
  
  
  with cheers
  Sprity...

  spirty...,
  As your username connects using their identifiers, capture this information in a set of global variables of forms (for example. OVERALL. UserID, OVERALL. Username, Global.PW, etc.), then change user to PAY. Since you switched the PAYROLL user at this point I guess that all transactions would be recorded against the user PAYS. Now, if you create an API to register the transaction audit, you can pass the pre and post values as well as the user information stored in your global variables from forms to the API to record the transaction on the real user account instead of the payroll account. I am considering this API as a fairly simple procedure of stored database that other takes a lot of individual settings for the new/old & user information or the stored procedure would preferably take a Ref Cursor (RC) or a Table PL/SQL of Records (PTR) with all the news, old and user information entered in the RC or PTR. This gives more flexibility and allows you to overload the procedure to handle any table need checked simply passing the name of the table concerned as one of the parameters to the procedure.

  Once again, my description is pretty generic because it is supposed to inspire your solution. The only real concern I have with the demands of your customers, it's you will need to enter their password. Why would they want the written in the verification of password table?

  I hope this helps.
  Craig...

• Query a directory and delete all files older than 1 hours

  How do I query a directory and delete all files in this directory that are older than 1 hour?

  I used CFDIRECTORY before displaying the pages in the directory and the directory information, but I can't understand how to query a directory and delete all files older than 1 hour of this directory.

  1 hour of old means that time is NOW over an hour of the date and time of the file on the server.

  You need to the user a combonation of the tag to read files and the to delete the files in conjunction of a tag to decide when and when not to do the removal.  The dateDiff function would be useful in this decision.

  In the pseduo code:

  NOTE: Look closely at the way the dateDiff works with fractional amounts.  That is, 59 minutes and 59 seconds is 0 hours while 1 hour and 1 second is 1 hour with the value of 'h' percision.

  Also note that I didn't look at the syntax for one of these tags, and I probably poorly named and. or misorderd settings.

• How to remove the alarms and events database of Citadel?

  Hello

  I use LV 2010 with DSC.

  I made a mistake in my program and I wrote too much data event and alarm at the Citadel. Database *.mdf/*.ldf files are quite large > 1 G. Normally, I connect only two alarms per day. I want to delete all events alarm + data before a certain time of stamps for example. 1.1.2011. How can I do? I tried to use MAX and perform the operation so I wrote small program which reach the data from temporary database and then remove it. Yet I can find old events and alarms... I am able to remove the traces of old but not the events/alarms. How do I remove the alarms and events?

  Thanks, Jim

  Hi Jim,.

  Have you seen this:

  http://forums.NI.com/T5/lookout/how-can-I-delete-alarm-and-event-data-from-a-Citadel5-database/m-p/5...

  Not sure if it is valid with the current version, but worth it.

• Hello Sir: I use a generator of form of oracle 10g and I want to search on two dates using between.how it is possible.

  Hello Sir: I use a generator of form of oracle 10g and I want to search on two dates using between.how it is possible.

  I guess its text fields are the date data type.

• DB-link between Oracle and MSSQL - deleted decimal in one query

  Hi all
  
  I configured a heterogeneous connection between Oracle and MSSQL. Then, when I run a query, I get the results of a numeric field (38.2) without decimals. It seems that Oracle remove the decimal places.
  
  The language in MSSQL is Modern_Spanish and in Oracle is Spanish as well.
  
  The most curious is that the field of MSSQL is a FLOAT so I recover decimal values, but if it is the DECIMAL number I get the results of the query without decimals. So, it works with FLOAT but work not with DECIMAL.
  
  Does anyone have an idea? Please I need some help on this...
  
  Thanks in advance
  
  Victor.

  SQL Server internal decimal interpreters using a period as a separator. Try the parameter in the gateway init file:
  HS_LANGUAGE = AMERICAN_AMERICA. WE8MSWIN1252

• How to query the data of Contact with multiple fields

  How can I query the data of Contact with multiple fields?

  For example, I'll get contacts which are changed after a point at the specified time and whose country is US. How could I make the chain of research of the SOAP API "Query"?

  And I also want to know how to make a search term for RESTful API for contacts above.

  Any suggestions?

  Thank you.

  Hi Biao,

  The following document describes how query for multiple fields using the SOAP API: request a Contact from several fields.

  And you can search multiple fields using the REST API with the & operator. For example, to search for a Contact by e-mail address and date of creation:

  • " emailAddress ='[email protected]' & converted > = '1369828886'".

  Hope this helps and please let us know if you need more information.

  Thank you

  Fred

• How to migrate from MySQL to Oracle stored procedure

  Hi all

  I've migrated mysql 5.1.42 - enterprise-gpl-advanced DB for oracle sqldeveloper 3.1.07 tool.

  DB objects migrate successfully except stored procedures.

  I checked .sql and files... Capture process not captured SQL stored procedures.

  Could you please suggest where I can check correct error or how to fix this.

  Thanks in advance.

  Hello

  SQL * Developer version you use is an old and you must use the latest version available from this link.

  Oracle SQL Developer

  However, even the v4 version does not support the migration of procedures stored as stated in this link - MySQL

  http://www.Oracle.com/technetwork/developer-tools/SQL-Developer/supportedmigplatforms-086703.html

  You will need to manually convert the MySQL in Oracle format, stored procedures since even the "Scratch Editor" under "tools - migration '-doesn't have an option for MySQL conversion.

  The documentation includes details of the difference between MySQL and Oracle stored procedures-

  Oracle SQL Developer information for the migration of MySQL®

  in chapter Triggers and procedures stored

  Kind regards

  Mike

• How to load oracle data

  I wonder a situation like this: a table contains a few million records (lines) that add up to 100 GB of data, while the RAM is 4 GB. When I run a SQL statement such as select * from mytable where certain conditions. How Oracle process the request? Clearly Oracle cannot load all data in RAM at a time.
  
  
  
  Scott

  A process in an operating system can use the RAM and disk storage. Just in case the RAM is not enough, the data are SWAPPED IN the disk and RAM disk will be EXCHANGED when necessary. And using the disk is a bottleneck (as it's IO and also mechanically, run instead of the RAM that is run electronically) so it slows down the process.

• Migration - MySQL to Oracle - do not generate data files

  Hello
  
  I have been using the SQL Developer migration Assistant to move data from a MySQL 5 database to an Oracle 11 g server.
  I used it successfully a couple of times and its has all worked.
  
  However, I am currently having a problem whereby there is no offline data file generated. Control files and all other scripts generated don't... just no data file.
  It worked before, so I'm a bit puzzled as to why no logner work.
  
  I looked at newspapers of migration information and there is no errors shown - datamove is marked as success.
  I tried deleting and recreating rhe repository migration and checked all grants and privs.
  
  Is there an error message then it would be something to continue but have tried several times and checked everything I can think.
  
  I also tried the approach of migration command-line... same thing. Everything works fine... no errors... but only the table creation and control script files are generated.
  The schema of the source is very simple and there is only the tables to migrate... no procedure or anything else.
  
  Can anyone suggest anything?
  
  Thank you very much
  Mike

  Hi Mike,.

  I'm so clear.
  You use SQL Developer 3.0?
  You walked through the migration wizard and choose Move Offline mode data.
  The generation of DDL files are created as are the scripts to move data.
  But no data (DAT) file is created and no data has been entered in the Oracle target tables.

  With offline data move, Developer SQL generates (saved in your project, under the DataMove dir directory) 2 sets of scripts.
  (a) a set of scripts to unload data from MySQL to DAT files.
  (b) a set of scripts to load data from the DAT files in the Oracle target tables.
  These scripts must be run by hand, specifying the details for the source databases MySQL and Oracle target.

  "no offline data file generated. Control files and all other scripts generated don't... just no data file. »
  «.. . but only the creation and control file table scripts are generated. »

  What you mean
  (1) the DAT files are not generated automatically. This should, if we need to run the scripts yourself
  (2) after manually running the scripts that the DAT are not present, or that the DAT files are present, but the data does not load in Oracle tables.
  (3) the scripts to move data in offline mode does not get generated

  Kind regards
  Dermot
  SQL development team.