How to re - install Acrobat after that hard drive has been replaced?

Similar Questions

• Reinstall xp after that hard drive has been replaced

  Hard drive of my computer dell laptop crashed. After replacing the drive hard windows would not load so I made a boot xp from my office (also xp) drive. It worked but I had to use the product code of the dektop pc. It is a way to put the good prod code in my computer dell laptop? When I restart the laptop dell, he said e-machine while it is charging...

  Hello

  Because you replaced the hard drive, your windows product code can not be validated. I suggest you to change the product key by using the product key. Follow the steps mentioned below.

  Method 1:

  I suggest you to update your product key. Click on the link below.

  Update your Windows product key

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key?displaylang=en

  Use the new product key and check if the problem persists.

  Method 2:

  If method 1 does not work then, I suggest you to make a phone on the system activation. Click on the link below.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Need to reinstall Vista after that hard drive has been replaced

  Hi I just got a hard drive go dead on me and replaced with an upgrade but when former tha died it took the OS with it how I restart the computer now or do I have to buy a new operating system

  * original title - drive fried *.

  Hello

  read this

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  If that does not work contact packard bell and get them to send you to the model computer recovery discs

  they do it for a nominal cost of $

  http://www.PackardBell.com/index.html

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• How can I top up my subscription to Adobe Acrobat after that my laptop has been wiped and reconfigured?

  How can I top up my subscription to Adobe Acrobat after that my laptop has been wiped and reconfigured?

  Hi Squirrel Nut,

  Download your subscription and access Adobe Acrobat by logging into www.creativecloud.com with the same credentials as before.

  Kind regards

  Ana Maria

• HP Recovery Kit will re - install Vista if hard drive has been replaced?

  Hello everyone, this is my first post so I hope that I understand.

  I bought a HP Pavilion s3050uk of second hand compact office, product number RY930AA.

  The only OS on it is a trial version of Windows 7 Ultimate, little time to expire.  I knew when I bought but I was just able to reinstall Vista Home Premium using the HP Recovery Kit and the number of product key from the COA on the PC sticker.

  However, I think now that the HARD drive has been replaced at some point - my machine has a 200 GB (Seagate ST3200822AS ATA) and I think that these machines haven't shipped with a 250 GB?  Now, I'm worried that I will pass on the recovery kit but it won't reinstall Vista because the hardware has been changed.  If it is probably the case of others has experience then I may as well save my money (which is very tight at the moment, where the 2nd hand PC) and put it toward the purchase of an operating system package full.

  Hope someone is able to advise me.

  Thank you

  Stephen

  If you buy a defined recovery disk and perform a factory original operating system image recovery and the partition scheme will be installed on the new hard drive.

  Certificate of authenticity (w\ license key) Microsoft Windows OEM is always visible on the bottom of the laptop?

• My hard drive has been replaced, now PE does not work!

  My laptop was having problems, which ended in my motherboard and hard drive being replaced. Before doing so, I basically copied my entire hard drive to an external drive. I copied everything then back on my laptop with its new hard drive, but now when I try to open PE it tells me to uninstall and reinstall. The problem is that it is not technically installed on the new hard drive! I have no way to uninstall it! What should I do to get it working again?

  More information:

  It's first Adobe Elements 9.

  I use Windows 7.

  I have no access to my old hard drive (just what I copied on the external drive to backup/storage).

  Given that I copied all of the hard disk, the program and everything with it's on my new, but I can't figure out how to uninstall or reinstall.

  (I have the same problem with Photoshop CS3 Extended, if anyone can help me with this too.)

  You will need to work around the problem that it won't let you not uninstall first. You may need to go through the instructions to remove manually, here - http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-9.html.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• the hard drive has been replaced in the Tower from my computer and now I need re - install windows vista but have no disk

  hard drive went bad in my computer hp and was replaced, I can't find the disk came with it or restore disks, I'm not sure I ever had any, is a model of Tower not laptop I need to know if there is a way to download a copy for my computer on a drive of my laptop or what should I do?

  Hello

  There is no download available on the Net and your hard drive as failed now, you are unable to make the recovery of the disks.

  And you cannot use from recovery disks of a different brand or model (laptop) to reinstall Vista on your Tower / Desktop

  Contact HP and ask them to send you a set of recovery disks.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

• My hard drive has been replaced. I want to restore a backup made on an external drive, using Windows backup software.

  I get to the step "to install the management of removable storage on Windows Server 2008

  1. Click Control Panel and then click on Administrative Tools.
  2. Open Server Manager, navigate to the features summary section and click add features.

  It is the section on the recovery of an old version of Windows.  My situation is all on Windows Vista.  Maybe I shouldn't use these intstructions.

  When I get to this step I can't find Server Manager.  I opened everthing under admin tools, and there is nothing that looks like this.

  If I go to this issue the wrong way, what should I do next?  The system has recognized my hard drive on Windows Explorer, but when I said retrieve the backup, it says that there is no backup file.

  Hi poudrc,

   
  I suggest you to follow the steps in the link and check if it helps.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
   
   
  You can also check out the link below.
  Back up and restore: frequently asked questions
  

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

   

   
  I hope this helps.

• Hard drive has been replaced and get the activation message

  My hard drive crashed (again) and the GeekSquad replaced the hard drive and reloaded the OS from a disk they had in the store.  I get a message from windows activiate.   I have the restore CD but did not have them when the car crashed.   How can I find my activation code?

  For activation look side on the box office or a cell phone, the bottom of the laptop.

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  5) stay on the phone (do not select/press options) and wait for a person to help you with the activation.

  Also:
  How to resolve common activation problems
  http://adacosta.spaces.live.com/blog/CNS! E8E5CC039D51E3DB! 67219.entry? a = 584475978

  How to activate Windows Vista by phone
  http://support.Microsoft.com/kb/940315
  http://www.mydigitallife.info/2008/10/13/how-to-activate-Windows-Vista-by-phone-activation/

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Toshiba dynadock can't connect to XPS L702X Windows 7 once the hard drive has been replaced.

  I tried the two installation from cd & install updated drivers from the Web site.  According to the documentation Dynadock Miss: Displaylink USB Gigabit network which I've tried to install the Displaylink but can't find it under network adapters.  I'm also missing Displaylink USB audio adapter, adapter, Displaylink (4305) & Dynadock U 3.0 under USB graphics cards.

  any advice or assistance would be appreciated

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your concern about access to the devices connected via the USB ports. We will help you with this problem.

  Few try the TROUBLESHOOTING steps below and check if this may help.

  Step 1: I suggest you to run the hardware and devices troubleshooter.

  Hardware and peripheral troubleshooting check the common problems and ensures that a new device or connected to your PC hardware is correctly installed.

  Reference: Open the hardware and devices Troubleshooter

  Step 2: I suggest an run Network Adapter troubleshooter

  Troubleshooting of network card find and fix problems with the wireless network card and others.

  Reference: using the troubleshooter from network in Windows 7

  It will be useful. Get back to us with an up-to-date this issue report for assistance.

• How can I reinstall Indesign after that my hard drive has been deleted?

  How can I reinstall Indesign after that my hard drive has been deleted?

  After obtaining a hard drive in working condition, you can reinstall the software using the discs if you bought the discs, or you can download your software as a trial version and use your original serial number to activate it.

  If the software is the latest version, you can download it from the Adobe product pages.

  If the software is an older version, you can download the demo version of the software using the link below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download on this site.

  http://prodesigntools.com/tag/DDL

• How can I retrieve my files from the clouds after my hard drive has crashed - files were not deleted.

  How can I retrieve my files from the clouds after my hard drive has crashed - files were not deleted.

  Don't know what your problem is - log on to Skydrive and recover the files that you need them, or download the app to Skydrive and they will all be uploaded at the same time.

• My photoshop has been removed after that my computer has been restarted. How can I recover my photoshop.

  My photoshop has been removed after that my computer has been restarted. How can I recover my photoshop.

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Use the Acrobat Pro preflight!

  To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:

  (1) the fonts in question are installed on your system and

  (2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.

  -Dov