How to re install vista backup drive

Similar Questions

• What is my vista backup drive for. I can run it to put vista on my com.can home not download sp1

  won't down load sp1 does sp1 with backup drive

  Hi Erieite,

  1. which edition of Windows Vista you are using?

  2. What do you mean by saying Vista family?

  3. what happens when you try to download Sp1? You receive messages or error codes?

  Backup recovery discs or Windows Vista discs are supplied by the manufacturer of the system containing a backup of the original factory condition or a favorable condition of a computer as that set up by the manufacturer of the system. This media is usually comes with most computers to reformat the hard drive and reinstall the operating system. If you use the Vista backup drive, it will delete everything on the system. You should back up important data before making any major changes on the system.

  If you receive a prompt to install the Vista SP1, then you must download and install the same. It will not be provided with the Windows Vista backup drive.

  I suggest that you perform the following steps to solve the problem of installation of SP1.

  You can read the following article and see if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  You can also consult the following articles and check.

  Learn how to install Windows Vista Service Pack 1 (SP1)

  What you need to know before installing Windows Vista Service Pack 1

  Hope this information is useful.

• Re: How can I install Vista on my Satellite P300D without recovery CD/DVDs?

  When my laptop first starts, it was puttet off all by installing vista. now, when I started the laptop another time, I can't now. He is always shown text: Please wait... Installation from my point of view some time... but nothing happens.
  How can I install vista again? Toshiba didn t deliver a recovery CD/DVD.

  Thank you

  Hello

  At boot press F8 and choose the first option offered. It must be something like the repair of your computer. After doing this just follow the on-screen menu.
  When Vista starts successfully at first creating restore DVD using preinstalled Toshiba Recovery Disc Creator tool.

  Bye and good luck!

• Can someone tell me how I can install a mouse driver in my system to Windows 7

  I suspect that my problem with the mouse is perhaps due to the pilot.  Can someone tell me how I can install a mouse driver in my system to Windows 7?

  Hi, see if that helps

  http://support.Microsoft.com/kb/258785

• How to re - install Vista on my Dell Inspiron 530 desktop computer.

  Re install Vista

  How to re - install Vista on my Dell Inspiron 530 desktop computer. I still have my original boot disks. ?

  Hello

  Reinstalling Vista Dell with disks:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  Dell Vista reinstallation without disks (IF you have a recovery partition):

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  See you soon.

• Satellite A100-188: how to install Vista graphics driver?

  I installed Vista Beta 2 and you have downloaded the latest driver ATI Vista Beta 2 with the support of X 1600. But with the ATI X 1600 on the A100-188 the driver won't work. The pilot did not find my X 1600. What can I do?

  Hi soumah

  Thanks for the comments. But please note that this OS is not official on the market and Toshiba recommend to use only the graphics drivers from Toshiba.
  You can use the other drivers but only at your own risk.

• How do we install steelseries 3gc driver for Windows vista to enable force feedback?

  I downloaded the driver necessary to enable force feedback, but how do I install it?

  .rar files are a compressed format that is not supported by Windows. You need a third party program to extract the content. A free, that you can use is 7-zip http://www.7zip.com/ .

  Information about the files in Wikipedia http://en.wikipedia.org/wiki/RAR .rar

• How to restore Windows Vista backup on Windows XP computer?

  I was about to lose my hard drive on a computer with Vista Home Premium. Stored on an external hard drive. Not able to find my Vista rescue cd, I so installed XP Professional I've had. Attached to transfer backup files, but will not transfer.

  Original title: Save transfer problemsproblems

  Hi Marty,

  Windows Vista backup files are in. Disc format hard virtual which is only supported in Vista. You would have to restore them on a computer that is running Windows Vista and then copy the contents of the Windows XP computer.

  See also: back up and restore: frequently asked questions

  How Windows Vista backup uses zip files to store backups (and how to extract the zip files)

• Windows vista backup drive

  I need windows vista business backup drive. I have the genuine product key genuine microsoft windows vista business but I have lost the cd/dvd of the windows disk, how to manage another copy of windows vista business backup drive?

  Hello

  This is the Microsoft Information to this topic for you:

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

  PS You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

• Qosmio F50: How can I install Vista Business

  Hello!

  I recently bought qosmio f50 and it came with the home edition of vista...

  I need to install Vista professional.
  How can I do?
  I have to format it?
  So how do I install back all the utilities and drivers which it came with?
  I have problems with my laptop if I do this?

  Post edited by: xaralas

  Hello

  The Vista installation is not difficult.
  He just put the Vista disk in the STRANGE and then start from the disc.
  The installation will start automatically.

  But this will format your HARD drive and you will lose your installed Win XP and other files.

  > How can I install back all the utilities and drivers which it came with?
  I guess you have a Toshiba Recovery disk.
  If you want to retrieve the OS installed by Toshiba, then you need to use the Toshiba Recovery for recovery disk.

  PS: what Qosmio F do you have exactly? I ask because 108 F is not known to me

• How can I install Vista without cd but have a valid product key?

  to install vista with a productkey

  Without the cd?

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How to re - install vista

  "The manufacturer was necessary in order to provide a way to reinstall Windows. "If a set of disks came with the laptop, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install of Vista.

  I was told this in another thread after keep for lack of updates to my computer and he suggested to reinstall vista.

  I have a Packard Bell EasyNote computer, how to find it (Please be gentle with my ignorance!).

  More to the question how can I reinstall vista via this method?

  Here is the General info.

  Contact Packard Bell for the EXACT info: http://www.packardbell.com/

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro M70-113: cannot install Vista graphics driver and lines appears on the display

  Hello

  I have satellite pro m70-113 with ati x 700 graphics card.

  When I installed vista, he installed the default drivers for the x 700 'mobility radeon x 700-microsft Corp.-WDDM '.

  I've updated the display drivers for vista, that released by toshiba 2 days back... but the driver is not updated to the latest version, only the catalyst control center is installed when I ran the update of the driver of toshiba.

  The problem is that whenever I put my laptop in standby or hibernation and resume... the screen shows thin lines vertical/horizontal... and I can't use the laptop... and I have to still put the system to sleep, just to hope that it is not blocking the screen this time...

  This problem is 25% of the time only when resume...

  This problem is not resolved by the update driver for toshiba has released a few days back... as is not installs the drivers (I can't even install the drivers with the option "update drivers" of Device Manager and select file driver update from toshiba.) It says windows find new driver, but could not install the driver... Contact the manufacturer...)

  This snap shows the problem... : http://img360.imageshack.us/img360/2783/12042007366copyod1.jpg

  I updated the driver from an earlier version of catalyst, as it is downloaded from the ati site before that toshiba has released the update... this time it updates some 8. XXX version but the screen problem remains...

  Second, this update of the driver leaves me not sleep my system... the process starts for a sleep, but go back to the locked screen without making sleep ever... so I have no choice to get stuck with the default Windows... drivers having only the problem of the screen... and not the problem of sleep...

  Anyone here with a solution?

  Thank you.

  Hello

  I have Satellite M70-159 and I noticed the same thing several times. For most Vista works well but I don't remember cases in which the described problem occurs. I was just curious on M70 Vista and have had no time to intensive testing.

  Anyway, it will be interesting to know if you have already updated the BIOS to the latest version 5.10. If this is not the case to do this and watch carefully if the problem persists.

• How do I install the graphics driver that came with my Satellite A210

  Well my previous my GPU overheating problem has continued and I go back to the drivers that came with my laptop.
  Can someone guide me on how to do it?

  That's simply

  Go to the page of European driver of Toshiba and download the graphics driver from Toshiba designed for you notebook series.

  Then start the Device Manager and uninstall the graphics driver current.

  Restart the computer and then install the graphics driver downloaded on your system

  That s all ;)

• How do you install the print driver FAX for m1536dnf in OS x Lion?

  Hi Forum,

  I have a Laserjet M1536dnf all-in - one network. When I install the driver under OSX Snow Leopard and Ubuntu, I have two shows of printers in the preferences panel. Regular printer and printer-fax MACHINE, so I can print to fax directly.

  But when I install the driver in OS x Lion, it shows only one printer, so I can't print to FAX directly. I checked the apple software update, there is no more than an update as well.

  Someone knows how can I install the FAX printer driver in OS x Lion?

  Thank you

  Noodle

  Hello

  Offer the product at a time print, scan and ability by retrieving the driver of the Apple software update.

  If you have installed the full features software, remove it by running the uninstall HP program located under Applications > CEJA-Packard and be sure to remove the existing print queue.

  Then Champagne for any update of HP software available.

  If the recovery of the printer HP Software Update fails for any reason, install the bundle HP Printer Drivers 2.8 below.

  Then the fax printer must be detected as well:

  http://support.Apple.com/downloads/DL907/en_US/HPPrinterDrivers2.8.dmg

  Kind regards

  Shlomi