How to read Windows 7 dump files?
I am currently using Windows 7 Ultimate (x64bit), I bought and did a new install of a few months back and I think I had my first BlueScreen?
That's happened
I had just taken, House and I turned on my PC and connected, I diverted, not even spread out there for like a minute, when I turned my computer back was to the black screen where it asks if to start windows normally or in safe mode, etc. because it was not shut down cleanly. I was so cionfused I started thinking, ' didn't I shut my computer last night, and just had this back on? So I summed it up to maybe a power outage unnoticed fast and I reconnected in and went to the kitchen for water, when I came back that I saw a message box saying that my Windows has recovered from a mistake, so I clicked to see the 'other info' and he said 'blue screen '.
I was so surprised, cause I'never never in all my 10 years using a PC, experienced the blue screen, even though I know what it looks like.
I read alil and learned that in any %, I can find a dump file mini that will tell what caused the problem in my system options and recovery it says it is registered as a "dump of memory the kernel", but I can't seen to open it cause I have not the right software?
I need to know if I should continue trying to figure why I had the blue screen and where I can find the software to open the DMP file.
Or...
Should I leave it be since the message says "recovered Windows of an error?
Help me please...
And I thank you.
In addition, the following link has some info on playing the minidump files (WinDbg read kernel memory image files):
If you have received a single blue screen error may be an anomaly and not to be concerned.
However if the blue screen errors continue then you could try to figure out what is the cause.
Tags: Windows
Similar Questions
-
How to read DBX outlook express files?
HOW TO READ OUTLOOK EXPRESS DBX FILES
I just bought a new computer with Win7. Now that the OE is gone (OMGosh!) How dbx files be read? I have OE files and now find there is no apparent way to read. I downloaded ParetoLogic but hesitate to run it. The message says it will make changes to my computer. What happens if the files are made completely unreadable! I ran the scan function and several "pilots" were listed as obsolete. Can it be good? I just bought the latest and greatest computer!
You need import dbx files into your e-mail without a name client. Win7 doesn't have a native email program of its own.
You use Windows Live Mail by accident?
Transfer of data from Outlook Express and Windows Live Mail:
For messages:
Copy the * ENTIRE * OE message store folder to a flash drive. (Folders.dbx must be included). Place it on the desktop or another location on the computer using WLMail. Open WLMail and: file | Import | Messages | Microsoft Outlook Express 6, and the point where it was saved.
Location of OE message store:
In OE: Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
For addresses:
Open the address book in OE and file | Export | Address book (wab) and save it to the desktop. Copy it to a flash drive. Place it on the desktop or another location on the computer using WLMail.
Open the Contacts list in WLMail, (go |) Contacts in the Menu bar) and the file | Import | Address book (wab) Windows and the point where you saved it.
Note: If you use a CD or a DVD instead of a flash drive, after placing on the new machine you must remove the read-only attribute in the properties before you import.
Bruce Hagen MS - MVP [Mail]
-
Can someone please read my mini dump files?
Ive been making these mistakes to fall frequently ARREST, but I haven't changed anything on my 32 bit Vista computer. I'm not very tech savvy but I have done enough research to know that someone can solve this problem to my analysis of these files 'mini '. I was wondering if someone can help out me?
dump files:
https://onedrive.live.com/ * address email is removed from the privacy *.
Thank you very much
-Lucas
Run the tool to remove the links below, Norton to remove these modules apparently remains.
Norton Removal Tool.
https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us
Then find and uninstall Hotspot shield module below.
Image path: \SystemRoot\system32\DRIVERS\taphss6.sys
Image name: taphss6.sys
Timestamp: Thu Jun 20 21:08:54 2013 (51C3A7A6)Note: If you want to make sure they are gone, download "autoruns" and it allows to locate and delete after checking that all the entries in Microsoft have been hidden, in order to eliminate the possibility of error. (instructions in the link below youtube video)
Autoruns for Windows
v13.01
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.
The Autoruns hide signed Microsoft entries allows you to zoom in on images of automatic start of third parties who have been added to your system and it has support for looking at images of Autostart configured for other accounts configured on a system
https://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
How to use Autoruns.
https://www.YouTube.com/watch?v=HhtSDsQYi28
Download, install, update ad run a complete scan with Microsoft Security Essentials.
Microsoft Security Essentials.
http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download
-
How to read a string of file &; assign val to a variable in the batch file
Hello
How to read a string from a file and assign the value to a variable, then return the value on the screen in the windows batch file?
Any suggestions?
Thank you.Try again with
off @echo
for /F "delims =" % in ('findstr /i OPEN status.log") set var = %% a
% Var Echo% -
How to read several bye a file of text one
Hi all
I need to select the files of text several times and read the files one by one
some how I managed to select the file to a single text and analyze the data in the text file
I need to do for mutiple files at the same time
Please help me
gowthamggk wrote:
I have sucessfully read a text from the file through this VI
but like like that... I need for multiple files
Why do you not use loop For?
gowthamggk wrote:
also should read the text line by line
You can right-click the function "read text file" and select "read lines." See the code snippet below.
-
How to read different packages localization files
Hello
I followed the tutorial below to locate a blackberry app.
http://supportforums.BlackBerry.com/T5/Java-development/localizing/Ta-p/442783
Do I always need to put my files .rcc and .rrh in the same place as my java class that will read them tor? Can I add my resource files to a more generic location for several classes of different packages can read the same resource file.
Thank you
I've got this working now. I just created a class to access the locale and the access to the parameters key regional that all go through this class.
-
How to read a lotus 123 file written with windows 98 on windows vista?
My grandfather has a lotus 123 file written on a computer with windows 98. When I send to my email on my computer which is Vista, it says that I can't open the file. Any ideas would be greatly appreciated.
You can try the links in this blog http://www-10.lotus.com/ldd/ssforum.nsf/47f741a63df5db1e85256d6b0054cb26/8f2f1c29a2aced7d852572f00070a017?OpenDocument but it is old and I don't know if it will work with Vista.
The current version of Lotus Symphony of http://symphony.lotus.com/software/lotus/symphony/home.nsf/home can still have these files may OpenOffice http://www.openoffice.org/
Both are free.
-
How to read strings from a file data?
Hello
I have a little. CSV files, which were inside the trees channels (load force, opening force, distance) captured from both engines.
I want to load multiple CSV files and analyze only two strings (opening force and distance of travel) and send them to a report (go the distance on the x-axis and opening force to the y-axis), but in this report as all channels of all CSV files I have loaded. (make a multiple load)
My question is how can I read csv files the channels I'm interested and then analyze?
I use this example to HELP to load the data:
Dim MyFileNames, iCount
Call FileNameGet ("ANY", "FileRead", "D:\BOF-MIU\BOF Dim", "data CSV (*.)") "CSV), *.csv", "All.lst", True, "data selection".
MyFileNames = Split (FileDlgFileName, "|")
ICount = 0 to Ubound (MyFileNames)
Call DataFileLoad (MyFileNames (iCount))
Next"and then I try to analyze, but I don't know how to divide the csv file to get only the channels I want."
Call ChnSmooth ("filedlgfile &" [1] / axis 1: Position (uu) "," / smoothed ', 12, "maxNumber" "...) Y, E, SmoothWidth, SmoothType
Thank you for your time.
HI Maria,
Here is the approach to file dialog you asked--use it instead of the "FilePaths = GetNaviSelFiles()' in the command script I sent you:
DlgTitle = "insert a file dialog title here...". »
StartPath = ProgramDrv & "Libr\Dat\".
FileExts = ' *.» DAT; *. TDM.
Call FileNameGet ("All", "FileRead", StartPath, FileExts, "No", True, DlgTitle)
FilePaths = Split ("|" & FileDlgFileName, "|")
The trick in the TDR file I sent you was set up for mode "exanding" in the "Page layout settings" dialog box It is an old display option that can cause problems if used in bad situations, but it seemed that it would make your life easier for this particular task.
Brad Turpin
Tiara Product Support EngineerNational Instruments
-
How to read data from several files and add columns in a single file
Hi guys,.
I have a problem in adding data from files in different columns. I have the attachment a file A and B which I am reading and not able to get the data in the Result.txt file. Please give your opinion on how can I do this
You must add the data of all files before proceeding with a single entry.
-
I want to store a string value of my request. After that, I remove my device app & reinstall my app. I want to get the previous value stored in recently installed application.
I think that if I can write the value to a file that is located in the internal memory of the device. After that, I read the value of this file in any time. I am new to the cascade of Blackberry, so I don't know how to write / read a file.
Please help me...
Thanks in advance.
Hi all
I solved my problem. I'm using the code below:
QString call: readFromFile()
{
QFile textfile("shared/documents/Test.txt");
QString str ="";
If (textfile.open(QIODevice::ReadOnly |) QIODevice::Text))
{
QTextStream in(&textfile);Str = in.readAll ();
}
else {}
QTextStream out (stdout);
off<>
}TextFile.Close ();
return str;
}Thank you all for the valuable suggestion...
-
How change using Windows 7 Ultimate file Access Denied so can access.
Using Windows 7 Ultimate I am the administrator of the computer. I use MSN to my browser window and tried to move my list of favourites on IE (which is not easy). MSN browser does not allow export of a file. MSN told me to locate the MSN folder # in the application Data folder but I'm here and I'm denied. Where can I make changes that allows me to access this folder?
Anyone who knows an easy way to move this folder Favorites let me know. So far MSN of course does not help. Frustrating!
Thank you
James
Hi James,
If you want to give all permissions for each files and folders, you must give permission to the root of the drive (means where the operating system is installed), but give permission to the root of the drive can cause serious problems (such as data loss or incompatibility and registry entry edit permission).
You can see the previous post to change permissions.
Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
Hope the above information is helpful.
-
How to read the extended cache file - config.Xml. in the C++ API
I want to create my own XML configuration file and set the values of configuration in that, so that the client application in C++ (using C++ API consistency) can access the config files.
Also how to get the instance of configuration values that read the customer of coherence.
i.e.
TangosolCoherenceOverride=$PATH/examples/config/tangosol-coherence-override.xml
TangosolCoherenceCacheconfig=$PATH/examples/config/extend-cache-config.xml
How to get the instance of this XMLDocument object? and read the values of the.
Thank you
NaveenHello
You can get the config cache that was read by recovering of the ConfigurableCacheFatory (which you can get the CacheFactory) by getConfig(). See:
http://download.Oracle.com/otn_hosted_doc/coherence/352CPP/classcoherence_1_1net_1_1_cache_factory.html
http://download.Oracle.com/otn_hosted_doc/coherence/352CPP/classcoherence_1_1net_1_1_configurable_cache_factory.htmlThere is no way to get the real XmlDocument object in the cluster that is played for the config-cluster (if you could open the same way yourself).
Thank you
-Rob -
How to delete Windows Update backup files
In Windows XP Pro, whenever an update from windows update has been installed, a backup file was created (example: C:\WINDOWS\$NtUninstallKB977816$) is it a similar backup with windows file 7 about the update of windows, and if so, can it be deleted once it is established that the MS security update is successful? Thank you, Sam.
http://taurarian.MVPs.org/WU_XP/removing_old_windows_updates.htm
Folders that have uninstall as part of the name (for example $NtUninstallKB282010$ who reside in C:\windows (hidden files) are window Hot difficulty updating folders/files) can be removed safely (providing ever, you wish to uninstall the updates). I recommend you leave these records for a period of at least one month to make sure that the update works correctly.
These updates can be removed individually or together. To learn more about the update/s go on:
http://support.Microsoft.com/kb/xxxxxx
NB: XXXXXX = the actual number, not to mention the "Q" or "Ko."Once you have removed the uninstall folders/files, then go to control panel, add/remove programs. Select the title of the corresponding Windows fix on the folder/file of the patch you just deleted, and select Delete. You will get a Windows error. This is because you deleted the uninstall folder/files. Simply choose OK and the entry will be removed from the Add/Remove Programs list.
Don't NOT delete the folder $ $hf_mig
Cleaning after installation of SP2
http://aumha.org/win5/a/sp2faq.php#afterand/or
XP SP3: Post Installation Cleanup
http://aumha.NET/viewtopic.php?f=62&t=33827Please note this is only for Windows XP and is not on Vista or Windows 7
TaurArian [MVP] 2005-2010 - Update Services
-
How to read the printers.xml file snapshot printer?
Hi I have a printers.xml file but I can't find the number of printed pages
Hello
What is your printer? Normally you can print a printer status report and it should show the number of printed pages.
Kind regards.
-
How to analyze a crash dump to determine the root cause of the dump?
Hello, I have a desktop computer that breaks down frequently. EventViewer showed that blue screens keep on occurring. We suspect it is a new software that has been installed and have a few dumps, but would appreciate any advice on playing the dumps to make sense. Thank you\|/Hello
BlueScreenView execution and it displays the information in a very readable format.
is simple and fast. BlueScreenView is not as accurate for the specific CAUSE
WinDBG however it brings a wealth of information - and it's still very
simple to use,BlueScreenView - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlWhen you click on each top of the article Bug_Check the lower part displays the
Names of files containing more information. Sometimes, the CAUSE is the real cause
but more likely, it's what has been assigned (or pushed to the fault) by something
on the other. Check commands/options menus, and right-click
While in BlueScreenView.How read partial memory dump files that Windows creates for debugging
http://support.Microsoft.com/kb/315263/en-us?p=1Check this thread for more information using BlueScreenView, MyEventViewer and
other methods of troubleshooting BlueScreens - answers top 3 (+ 1 more). This
Convenience store is for Windows 7, however, she also works for XP and Visa.
the main differences are using RUN instead of start - search (for XP).------------------------------------------------------------
WinDBG is a more complete debugging tool.
How to read the memory dump file that is created by Windows if an incident occurs
http://support.Microsoft.com/kb/315263/en-usUsing the Microsoft Windows Debugger (WinDbg)
http://kipirvine.com/ASM/4th/debug/WinDbg/index.htmWinDbg
http://en.Wikipedia.org/wiki/WinDbgDownload and install the debugging tools for Windows (use the SDK)
http://www.Microsoft.com/whdc/devtools/debugging/default.mspxI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
Satellite A100-847 sound driver do not install on Windows 7 64 x
After I install Windows 7 Ultimate 64 bit on my laptop, I don't succeed to install the audio driver (I try to use Realtek driver audio worms. 2.47 and Win 7 32 bit version of database drivers Toshiba.)All other drivers work fine.Anyone can give me a
-
Pavillion DV6: DV6 restart when stop
Help! I'm a COMPUTER tech and have never known a subject as frustrating as this. If I have laptop DV6 of off windows startmenu and application downtime everything fits well and looks at the stop, but there is a break of about 2 or 3 seconds where all
-
Windows Media Center Guide - no data
After doing an update, windows media center TV guide display more data... said 'No data available' went to settings, put in place the guide... guide downloads, but will not display the show there. ????
-
My question is, if possible to merge two accounts?I have an account student, but now I got a business account, and I would really like my student data on to my new business account. Anyone know if this is possible?I have a website via Adobe portfolio
-
4.1 the Palm Centro?
There was an earlier discussion on the Office of Palm/access 6.2.2 ugly without color coding, etc. Someone talked about back in 4.1, but I did not understand on 4.1 may or may not be synchronized with Centro. Just bought a new Centro specificallly