How change using Windows 7 Ultimate file Access Denied so can access.

Similar Questions

• I have a laptop acer 5552 on windows edition Home premium... .He crashed and a friend used windows 7 ultimate to run again how to make Home Premium return on it

  I have a laptop acer 5552 on windows edition Home premium... .He crashed and a friend used Windows 7 ultimate get back to work how to make Home Premium back on that I do not have the disk backup I lost it

  Hello

  • What were the changes made before the problem occurred?
  • What happens when you start you computer?
  • Are you able to boot to the desktop?
  • You receive an error message?
  • If your friend has installed Windows 7 ultimate or just fixed the crash problem - was - it own installation\custom?
  • What version of Windows are you using?
  • When you say "windows home premium" are you referring to Windows Vista or Windows 7?

  If you are able to boot to the desktop, you can check the version of Windows.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
  Response with more information.
  See also:
  http://support.Microsoft.com/kb/555375

• Using Windows XP with an access switched. How can I stop the network Dialer to invite the user connect even if I checked never dial a connection in Control Panel, then apply, then OK?

  Using Windows XP with an access switched. How can I prevent the network Dialer to invite the user connect even if I checked: never establish a connection to the Control Panel, then apply, then OK? She comes right back in a few minutes for: always connect by default. Help! Control panel Connections tab doesn't really seem to apply my change to never establish a connection right back to always make the default connection. What else is there to do?

  Hi Richard,

  You did it all change hardware or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  Network connections and remote access troubleshooting

  Hope the helps of information.

• Almost 100% of the time, when I move the window of Firefox to the left or right, the content remains fixed on my screen - using Windows 7 Ultimate - how to solve so that

  How can I make the content moves WITH the frame as it is to the left or the right. O.K. works in upwards or downwards direction. If the chassis has been moved to the right, leaving the fixed content, the "buttons" don't work until the frame is moved manually to the left side of the screen. I use Windows 7 Ultimate (x 64-bit) with a LCD 1920 x 1200 in Firefox version 13.0.1 and PORTRAIT orientation. I don't have this problem with Internet Explorer or Chrome.

  Hmmm, could you try disabling graphics hardware acceleration? As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  If you restart Firefox, the problem is solved?

• How to use windows search to search the contents of a bunch of files with random names / extensions?

  How to use windows search to search the contents of a bunch of files with random names / extensions? Plain txt files say 1,000 with random name of file extensions?

  You can always search within those, but you need to add extensions to the file system so that it knows to look inside these files.  You said that you have a lot, so it's perhaps tedious.  Here's How to search within several types of files.

  One thing you could try is rather to make a copy of this file, rename all the files to the same extension (even an extension false for example something.bill) and perform your search on this band.  Just an idea.

• How to use windows update with browser firefox4

  How to use windows update with browser firefox4

  You MUST use Internet Explorer to access http://windowsupdate.microsoft.com.

• I used "windows easy transfer", but after that I can see the files. Any idea about it?

  I used "windows easy transfer", but after that I can see the files. Any idea about it?

  original title: Windows easy transfer

  Hi Vrajeshparekh,

  1. what files you're talking about?
  2. When you see the files?

  When you use the Windows easy transfer cable to transfer the data that the data is copied. So you copy the data on the old computer also.

  Windows Easy Transfer (applies to Windows Vista)
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  How Windows Easy Transfer makes setting up a computer easier? (Applies to Windows Vista)
  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easier

• How to use Windows Easy Transfer

  When you use transfer should I the two computers connected to a screen, mouse, keyboard... etc?

  http://support.Microsoft.com/kb/928634

  How to use Windows Easy Transfer to migrate files and settings from one Windows computer to another Windows Vista-based computer

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• I would change my windows again because is working dosent good can you tell me how I can do it because I have all the vista cd

  I would change my windows again because is working dosent good can you tell me how I can do it because I have all the vista cd

  You don't say what kind of discs to have.

  Here is the info on how to reinstall using a Vista DVD from Microsoft.

  For all other Vista reinstall information, contact the manufacturer of your computer.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How to read Windows 7 dump files?

  I am currently using Windows 7 Ultimate (x64bit), I bought and did a new install of a few months back and I think I had my first BlueScreen?

  That's happened
  I had just taken, House and I turned on my PC and connected, I diverted, not even spread out there for like a minute, when I turned my computer back was to the black screen where it asks if to start windows normally or in safe mode, etc. because it was not shut down cleanly. I was so cionfused I started thinking, ' didn't I shut my computer last night, and just had this back on? So I summed it up to maybe a power outage unnoticed fast and I reconnected in and went to the kitchen for water, when I came back that I saw a message box saying that my Windows has recovered from a mistake, so I clicked to see the 'other info' and he said 'blue screen '.

  I was so surprised, cause I'never never in all my 10 years using a PC, experienced the blue screen, even though I know what it looks like.

  I read alil and learned that in any %, I can find a dump file mini that will tell what caused the problem in my system options and recovery it says it is registered as a "dump of memory the kernel", but I can't seen to open it cause I have not the right software?

  I need to know if I should continue trying to figure why I had the blue screen and where I can find the software to open the DMP file.

  Or...

  Should I leave it be since the message says "recovered Windows of an error?

  Help me please...

  And I thank you.

  In addition, the following link has some info on playing the minidump files (WinDbg read kernel memory image files):

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/blue-screen-errors/e1c01b9c-89ac-4EEE-b60a-6a5e0eb4d641

  If you have received a single blue screen error may be an anomaly and not to be concerned.

  However if the blue screen errors continue then you could try to figure out what is the cause.

• Qosmio F20-155: how to use BT to share files with the mobile phone

  Hello
  I HAVE TOSHIBA QOSMIO F20-155, BUT I DON'T NO HOW TO USE BLUETOOTH TO SHARE FILES WITH MY CELL PHONE
  PLEASE HELP ME

  Hello

  First a simple question: are you sure that your laptop supports Bluetooth?
  AFAIK the Qosmio F20-155 was delivered without the BT module.

  In addition, if you are not sure if the phone has BT then you can check the bottom of the unit. It should be placed a label BT if the Bluetooth has been installed.

• How downgrade from Windows 7 Ultimate to Windows XP Home Edition?

  How downgrade from Windows 7 Ultimate to Windows XP Home Edition?  I understand that what is happening back, but my printer & a lot of programs that I can not afford to replace now is not compatible with Win7.  I tried to insert the WinXP disc, but he says the facility is "blocked due to compatibility issues".

  Hello

  To install windows XP on windows 7, you need to start your computer while the cd is in the drive. This will allow the system prompts you to "Press any key to boot from the CD-ROM.." and then follow the instructions accordingly.

  I hope this helps.

• How to use windows scan with the new canon printer is connected and the copy and printing, but can't seem to be able to use the technique of scan windows

  How to use windows scan with my new canon MX 922 printer.  It is conncected and copying and printing but can't seem to use the windows scan option, the cannon that which for me is slow thanks

  All in one, type printers (print, copy, scan) usually have a very specific set of instructions during the installation.  If not followed exactly the probability is that the scanner will not work.

  Canon: http://www.usa.canon.com/cusa/consumer

  Download and read the Setup instructions for your model, have you followed the instructions exactly, more precisely when to connect the printer / scanner during installation of the software process?

  J W Stuart: http://www.pagestart.com

• am I allowed to use Windows 7 Ultimate, since Microsoft stopped selling or is it still hacking?

  Hello, I am allowed to use Windows 7 Ultimate, as Microsoft has stopped selling or is it still hacking? or I have to wait for its copyright expires first, and when is it going to be. Thanks in advance.

  Original title:

  Windows 7

  Policy: http://windows.microsoft.com/en-au/windows/lifecycle

  If you are running a legal copy of Windows 7 Ultimate, of course you can always use it.

• Disconnect external USB key using Windows 7 Ultimate 32 bit

  Whatever the USB that I connect to my desktop PC Windows 7 continualy disconnects readers. I tested many drives, but when tested on my laptop using Windows 7 Ultimate 64 bit all these exact same drives work perfectly.

  My office is using and Intel Core 2 Quad Q6600 2.4 GHz with 3 GB of memory.

  I've read this complaint anywhere on the Internet and I tried several fixes with no positive results. All the drivers are up to date. I uninstalled and reinstalled until I'm blue in the face.

  What I read during my research, it seems that this is a common problem that 64-bit users are complaining a lot, but that's obviously a problem with the 32-bit version of Windows 7 as well. Many tech Internet sites also claim that it is ONLY a problem on the desktop and not on laptops, which I guess I confirmed in my tests.

  Everyone does experience, and if anyone has found a fix?

  Thank you.

  Hi flhtcuu,

  See the following articles with some good information and troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-USB-device

  and:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think