How to reboot my laptop to get out of safe mode because I'm stuck on it permanitly

Similar Questions

• Instructions to get out of Safe Mode may not work (reboot, reset), then how the heck out of Mode safe?

  Tonight, I went in Firefox for the first time at least two years. When I tried to open the version of Firefox, I got in my Applications, it is opened in Mode safe.

  So I downloaded the latest version of Firefox open, and it automatically retrieved my old favorites. However, the download open mode without failure.

  I have pores through the help files and tried a few suggestions required out of Safe Mode. I closed and reopened Firefox, choosing Reset. That did not work.

  I closed Firefox and restarted my computer. Then I opened Firefox. It opened in Mode safe and gave me no alternative.

  I only went in Firefox, because I couldn't access the router configuration page Cisco/Linksys (198.162.1.1) following the instructions I gave to me. I guess Chrome might have had a problem, so I decided to try Firefox. But I can never know if Firefox might have gotten me in the configuration page of the router, I have to go, because I'm stuck in Mode without failure.

  While I strongly agree with nature without non-profit, open-source Firefox, I remember why I stopped using Firefox a long time ago: it is narrow in its help functions, and it takes too much knowledge of the user.

  So, I'm stuck, and I can never get this router put in place, as I am in desperate need of.

  I doubt that I will check in the forum, because I do not think there is any point. If I can't even get out of Safe Mode - and I don't know how it happened in Mode safe, because there certainly were no accidents in the years more doubled in the course of which I haven't used Firefox - it is useless to attempt to use this browser. If you want to contact me, you can do so through the email address I registered with.

  Have you checked the target line in the shortcut to the Firefox desktop (right click: properties) to ensure that there not - safe-mode switch of attached command line?

  Also make sure that you are not now the SHIFT key or use a hotkey with only the Shift modifier.

• I can't get out of Safe Mode boot

  Original title: cannot EXIT the MODE without START FAILURE

  Ouch, I really did it this time. I am running Vista Home Premium, AMD 64.  Last weekend, I tried to download an audio file and could not understand why it wouldn't download.  It turns weird as extensions AU or something.  But before I figured out it is the reason why it would not download, I tried other things that probably did not help my computer at all.  I went on a site to update the drivers.  I have no idea that I have updated drivers.  I also downloaded a new version of Java.  There may have been other things I've done but I do not know what.  This shows that a little knowledge in the wrong hands can be a dangerous thing!

  Since then, I've been making some unusual pop - ups.  The first said "rundll32 Windows host process has stopped working".  I've been using Windows & so, I understand why I'm going, but I don't know how to get rid of it.  The other pop-up that was more worried is "Windows Defender detected programs that may compromise your privacy or damage your computer.  Trojan:Win32 / nundo. Gen! A Trojan:Win32 / Hiloti.gen! One' being not not sure of what I did over the weekend that caused this, I decided the best thing to do was a system restore to a date preceding the last weekend.  I tried last night, April 14. When I went into the system restore, there was no option to choose a restore point other than yesterday's date, April 14.  I clicked on choose a different restore date but nothing happens.  Why is this?  So finally with no other choice, I clicked on yesterday and proceeded to restore.  After the restore and the computer has rebooted, I realized that I was still getting the same two pop-up windows.  Here is where I really get things screwed up.

  After the restoration & closing & turn my computer once or twice to see that I had the same problems, I came up with the brilliant idea to start my computer in safe mode.  I don't know why, I didn't know what I'd do once I'm in safe mode, but I thought I'd give it a try. I reiterate the previous statement, a little knowledge in the wrong hands is a dangerous thing! So I did a restart and exploited the F8 key until that startup options it.  I chose safe mode.  Now, almost nothing works.  I can't go on the Internet.  Restore still won't let me choose one date other than those of yesterday and the worst of all, I can't return to normal startup upward.  I tried restarting the computer and tap the F8 button until what came startup options it.  I scrolled down & selected normal startup upward.  But when it starts, it is always in safe mode.  I spent more than 4 hours trying to solve this problem.  Finally, I turned off the computer and went to bed.  I was hoping that the computer fairies could come and fix things while I was sleeping.  No luck.  This can be corrected?  Your help is desperately needed.  Be very specific.  I'm sure it's hard to say, but my computer knowledge is limited.

  I'm very grateful for any help you can give me.

  Sandee

  Matt, thank you intervene and adding additional support for this issue.  I don't see your answer in time & I took my computer to the person IS where my husband works.  I was too scared to run the full recovery.  One of my big questions I couldn't get out of Safe Mode Start up.   Here's something important, he found... It is entered in the system configurations and found START up in safe MODE has been verified.  Don't ask me how this cuz happened I don't know I go there & check it but once he fired it I was able to repeat a regular start.  Hallelujah!  He was able to fix most of my problems, but I've always had some problems... as not be able to uninstall a program.  With the extra help last weekend from this site, I think I'm pretty much back to normal.

  Do you think I should run the Vista SP1?  I started to do the day that my system was haywire so I highly doubt that it installed properly.  Will not be automatically implemented Microsoft?

  Once again, thank you to all who helped me with this.  I would be about $200 more poor now if it wasn't for your help.

• my Vista computer can't get out of safe mode

  my computer can't get out of safe mode... Help

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

  ________________________________________________________

  If the above does not apply to you

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Can't get out of safe mode using msconfig

  I tried to use the msconfig on my laptop,
  who has windows vista, to get out of safe mode.
  Whenever I signed off but when I went back
  and the same choices came, I checked start windows normally
  which bring me just on the choice of
  Start windows normally or in safe mode,
  but only the safe mode would make me on the computer.

  I appreciate any suggestions.

  Thank you
  

  Robert

  You should uncheck the mode without fail in the Msconfig splash screen.

  

• Hi I seem to be unable to get out of safe mode, I think I may have wrong bios config I tried the default settings. When I turn off computer sometimes a blue screne flases__

  I can't get out of safe mode, I think I messed up in the Woods, that a blue screen also flashes when I restart

  For ANY BIOS problems, contact your computer or the manufacturer of the motherboard.

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Table of contents > Vista:

  This link is to enter; Follow the tips below to get by:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     UNCHECK the box labeled Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

     Click the restart button to restart your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• can not install/does can not get out of safe mode pc

  Obviously, I have a problem w / my pc = I can't get out of safe mode - I can't install essentials microphone or kapersky pure pd - I have tried everything that I could, always safemode.help!

  Aiming to repair the system for assistance: http://answers.microsoft.com/en-us/protect/forum/protect_start/i-cant-download-micro-essentials-or-kapersky/08ae6352-4867-4c77-b8ad-347fd96aba4c?page=1&tm=1330375825720#footer

  http://www.SevenForums.com/tutorials/700-system-restore.html

  Kind regards...

• can't get out of safe mode, I must of locked in safe mode - can someone help me

  need help, get out of safe mode, f8 does not work

  Hello

  Click Start on your Desptop > in the search type "msconfig" without quotes > press ENTER > window in the Configuration of the system that appears certain that "Normal startup" is selected > also click on the "STARTUP" tab at the top of this window and make sure that 'Safe boot' is NOT selected > press 'Apply' > 'OK' > then follow the prompt to restart your computer.

  See you soon.

• No start will get out of safe mode

  all boots fail, cd, dvd works not or flash driver

  > all boots fail, cd, dvd works not or flash driver

  What that has to do with the safe mode?

  RE: CN can't get out of safe mode

  Start > in the search box, type msconfig > press the Enter key > uac prompt > click on STARTUP tab at the top > make sure that there is no checkmark in front of "FAE Boot. Indeed to ensure that NO check marks anywhere > click OK when finished.

  You can start in normal mode now? For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I'm having troble getting out of safe mode, I tried restarting and fixing of the window but won't get out of safe mode.

  I tried my computer out of safe mode so many way, I'm losing it I get this close to throw my computer (-).

  It does not help if you say people here than you have ever tried!

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Using the method of System Configuration tool:

  Note: If you have problems to enter Safe Mode using the F8 method, don't use this method to force so that it starts in mode without failure. For reasons that why you should read this.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     UNCHECK the box labeled Start secure

  6. Press the apply button and then press the OK button.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't get out of safe mode when starting, and can not run the Setup program from windows XP in safe mode.

  I have a XP box that would only start in safe mode.  I needed to repair windows, so I started updating reinstall option but to reboot it says it cannot run in safe mode then it tries to boot into normal mode but crashes - which is what I am tring to solve.  Now I'm stuck because the computer is now making a loop and I'm stuck.  There is no available recovery console, it shows just the installation restart then goes into the shot.  If I try to launch safe mode, that it says cannot run update in safe mode then restarts in normal mode, which hangs then.  I'm stuck.  Boy the days where I wish I could just make the prompt C:\.  Thank you.

  You can connect your problematic hard drive to another PC to copy your important data, using a device such as:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002

  or

  http://www.Newegg.com/product/product.aspx?item=N82E16812119244

  I'm still not 100% convinced that you boot from the CD. Your Dell has the option of F12 to select a boot real-time device (as soon as you turn on the PC)? Also, remember that you have to "press any key to boot from the CD" when you see this screen! Of course, during a reboot, you start from the hard drive.

  Even if you did everything by the book, a repair installation could easily 'loop' as you describe. But as long as your hardware is healthy, a clean install is done.

• How to get out of safe mode?

  Original title: Safe Mode start

  How immutable everything I did for that now my computer starts in safe mode?  Before I did all what it was I never saw the safe mode screen and now I get the black screen with the four security modes in the corners.  I don't like it and want to change the way she was before.  Also how and where can I find a way to get my computer back to the way it was three or four days before I did all this stupid thing the unwanted changes?

  JS

  Go to start > run > type msconfig.exe > change to normal startup on the general tab & uncheck mode safe mode on the Startup tab

  

  

• My laptop is stuck in safe mode, please help me get out of safe mode. Thank you

  Original title: using safe mode

  My toshiba laptop running Windows 7 is in safe mode and I do not know how to exit safe mode. can you help me? Thank you, Mary

  Original title: using safe mode

  My toshiba laptop running Windows 7 is in safe mode and I do not know how to exit safe mode. can you help me? Thank you, Mary

  If you restart the computer, also restarts in Mode safe?

  If so, try this...

  Start button > Search box, type msconfig > press the Enter key > at the top, click on Startup tab > make sure that there is no check mark in the security box boot > if so, uncheck it > make sure there is NO checkmark anywhere in this window > click Ok when finished.

  Restart the computer.

• Get out of Safe Mode

  I recently did a system restore and now I can not exit Safe Mode.  I pressed f8 on startup to the top and entered start normally several times, but I'm studk mode without failure.  How to return to the Normal Mode?

  Well, it worked, thanks, however, everything is still very large.  How to get back to normal size?

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to get out of safe mode, your solution does not work

  went into SafeMode to solve a problem of flash player. now I can't get out. I tried solution in the help section. did not work. uninstalled the program. and the new downloaded version. did not help.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!