How to record a signal all on *.wav

Similar Questions

• How can I use the USRP to record a signal using its two RX ports simultaneously?

  Hello.

  I am trying to record a signal using two antenna cone. The reason that I need two antenna to cover the bandwidth (DC - 6 GHz). a single antenna covers DC - 300 MHz and the other covers 300 MHz to 6 GHz. so I need to use two RX port of USRP at the same time to record the signal. I have two questions:

  1. is this all USRP market capable of covering this frequency range?

  2. is it possible to use the two RX port at the same time to the signals of the records I described? If this is not the case, how can do?

  P.S. I have two NI2920 USRPs and two USRPs N210 in my lab.

  Thanks in advance for your time.

  Sam.

  Hi Sam,

  To answer your first question, the USRPs you can reach the bandwidth you want. There is not a USRP, to my knowledge, that can reach this range in a single device.

  Also note that you can only use RX convened for two different ports at the same time using LabVIEW and the pilot of the USRP. If you want to use the two lines of RX, you will need to run a session with a single line, close the session and then start a different session for your second RX line.

• I want to use sound recorder to save as wav audio is not wma... How do I save it as a wav or mp3 file in order to make a cd and read it in my car?

  I want to use sound recorder to save as wav audio is not wma... How do I save it as a wav or mp3 file in order to make a cd and read it in my car?

  Hello

  1 are you referring to the sound recorder program in Windows?

  2. you have all the music you want to convert to WAV?

  3 are you referring to the "Sound Converter" when you say 'tape recorder '?

  If so, you can use third party software to convert WMA to WAV audio format.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk

• Qosmio F10: How to record audio and video and use QosmioPlayer

  I am owner of a Qosmio F10-122 with TV tuner and I really need HELP. I'm Italian.

  The questions are:
  1 QosmioPlayer version 4.0.1 (2005022812) (according to the procedure of the forum) has installed fine but the sensitivity is poor; in any case the question is: is is possible to record videos? Also is it possible to record audio?

  2 input and video output are stupid; I can see Windows and QosmioTV on HDTV via DVI/SCART but I can't input in MCE TV or QosmioPlayer any signal IN Composite; so the question is once again how can record AUDIO from my Home stereo or VCR VHS VIDEO?

  3. I only use VIDEO IN to WATCH is not to save: where is my fault?

  Thanks, Marco

  Hello Marco

  I did some testing and I can tell you about my experience on Qosmio G20.

  1. as far as I know early versions of Qosmioplayer did not have the registration option but now I hope that your preinstalled version has REC option. If so, please be sure that you have about 5 GB of free space for the recorded material.

  It is not important what signal is sent to your Qosmio (TV or VCR VHS-connected) you can find it if you look at the channels. With REC option, you can save what you want. I tested it with my VCR VHS and I recorded some old movies. This material was recorder und great quality was the same as on cassettes. After recording, I started Windows MCE and transferred the material recorded in Windows using Qosmio player utility.

  I have not tried, but I put t think you will be able to record audio using only Qosmioplayer.
  2. you can record movies VHS if you connect your VCR VHS on the Qosmio using the antenna cable. Launch Media center Edition (TV option) and scan channels. In my case, I could watch movies VHS on MCE on channel 31. Using REC option you can save all documents of video cassettes. Later, you can change the recorded material and create own DVDs. It really isn't a problem.

  Your audio Home Audio recording can be a bit more problematic, and if you want it to be on the professional path you will need a device external and of course some professional recording software.
  3. I don't know what to write here. Just try to do what I already descriebed under 1 and 2.

  Good bye

• How to record video in or of port S-video on Qosmio G40?

  Can someone tell me how to record video or S-video ports, because I tried the Ulead DVD factory program and only capture device, he could see was the webcam, and he did capture her

  After that, I downloaded the file to update provided by the support Web site
  That the program could see the devices are the TV tuner and the webcam (which he could not access more for some reason any)

  After that, I downloaded a more recent update simply is identical to the last updated and seems that someone in the support Web site made the link to the new update which they do not have to file the previous update that doesn't really matter.

  Hello

  There are 2 ports s-video; s-video output port is not designed to pick up signals from an external source. This port name says it all; It s an OUTPUT port!

  S-video-in port must be placed on the right side of the laptop. Don't mix the two ports. But note; This port receives only video signals. To hear the sounds, use a video cable to connect the audio terminals of the device and your computer.
  Red: audio right channel
  White: channel left sound
  The Ulead DVD Movie factory can be used to capture this signal.

• How to record from Apple Store invoice in the office?

  Apple Store Canada, I bought a backlit keyboard Logitech CREATE for my iPad Pro - in order to register my product with them that I need to download the invoice and all the Apple site offers is to print it.

  How to record on my desk, preferably in a .pdf file?

  Well, to answer my own question, it is not directly possible, unless you have Windows 10 and then you can print to PDF which would open the Bill in Acrobat Reader or DC or something else, and then you can save it.

  There is a free application that you can download on other systems.  I shouldn't advertise, but it starts with the c Word and ends in pdf.

  Who is achieving the same goal.

  Of course, the best response of all would Apple allow to record the invoice directly in PDF format.  Which shouldn't be too difficult for them to do, no doubt?   In hindsight I see that this has been a perennial question.   Sorry I can't offer any suggestions for Mac or iOS that I don't know if there is.

• Satellite L300: How to record the sound from a video without sound

  OK, yes the title of the topic is not entirely clear. Here's my situation: I just bought a Toshiba Satellite L300 with Vista; Realtek HD Audio Manager is installed. I would like to record the sound of a video file using Goldwave (a sound editing program); but I don't want to have to listen to the sound, while it's recording.

  On Windows XP, you used to be able to record the sound of the stereo mix, but put the speakers on mute and it would record again. Now I find that I have to turn my speakers in order to record anything on my computer. (Yes, I fiddled with all mute buttons, insured that all reading and recording devices are working and front volumes. My current solution is to plug my headphones on my laptop and to reactivate the sound from the speakers to register... and not put the headphones in my ears)

  I have now spent in the last 4 hours looking for a solution, and I must say it's especially ridiculous. I used Vista before and I've heard rumors of how many people hate, but honestly, how is it that now the audio capabilities seem to be reduced?

  Does anyone have a solution of how to record sound with the speakers on mute?

  Hello

  I also recorded the audio of a video file using another software called 32. and Win XP
  I also used the stereo mix, but to be honest I have never muted the speakers while recording.
  To be honest I n don't know if it's possible, but if you want to test, you can try the Realtek HD audio Manager in the access panel and set the speakers to cut on the first tab called speaker.
  But as I said, I've never tested and that's why I m not very good if it will work.

• How to extract the signal from the waveform of my power level designated?

  Hi all

  How can I extract the signal of the waveform accroding to the power level? I read the Trigger & Gate .vi, but this vi retrieves the signal duration. I want to extract the signal depending on the power level.

  As shown in the following figures, the signal I want to deal with is between 130000 to 140000, if I Zoom, I can see the useful signal is between 135400 to 138200. The question is how to extract the signal in the area?

  I tried the sub_NoiseEst_And_Chop_Shell.vi in the example of Packet_based_link also, but this Subvi seems to be a bit slow. Can someone give me the best advice? Thanks in advance!

  

  

  I'm working on something similar, but have not had time to fully develop.

  My idea was to use an envelope detector (low pass filter) and then use a detection of energy VI on the envelope.

  Here is where I left

  

• Recording of signals DAQ

  Hi all

  I am a new user of Labview.

  I would like to know if it is possible to build a simple VI to record a signal at a rate of sample, without specifying the number of samples to acquire priori. In other words, I would create a program that records a signal for an indefinite period, between the time wherever I start it and when I manually stop the acquisition. To stop the acquisition, I would use a stop button (maybe put everything in a whil loop?)

  Could you please tell me if there is an easy way to do it with the DAQ assistant? or I have to convert and set the Subvi to achieve?

  Thank you, I tried to watch if someone already posted this question, but I didn t find.

  Good bye

  Emanuele

  
  

• Find out how to record things I don't want to remove it from windowsold

  I would like to know how to record some of my stuff before you remove old windows

  Hi, Cathy,.

  If you are in the folder and you know what documents you don't want to delete,

  Hold down the CTRL key, and then select all the files you want to keep clicking one by one.  Now keep the Ctrl key while selecting the files

  Right-click on the last selected file and select move to folder

  Move the items window will open

  Navigate to where you want to move documents

  If you do not have a folder prepared for these documents, click on create a new folder

  Once you have created the folder, click on move

  You have completed

• How to record a video on MX300

  I use Mx300 for Visio-Conference, but I don't know how to record a video on this device

  My scenario:

  -Record (720-1080) HD video with sound

  -Save this video on my laptop that connect with Mx300

  I thank all of you for your time,

  The Vuong

  You are not able to connect with your laptop and use the camera and the microphone of the endpoint to record a video, it does not work like that and is not capable of it, as the endpoint is used for the purpose to have video-conferences.

  Besides TCS, you can use WebEx Meeting Center and CMR Cloud with the MX300 to record a video and save it on your computer.

• How to record a Visual Basic project

  Wasn't really sure that this should be classified as, but it's a Windows program...

  I have created a web browser in Visual Studio 2012, just for the program and want to know how to record properly so that I can run on a machine that is completely different as a browser.
  I went through all the folders to get the .exe file, but it does not work if I move the file on my desktop (it cannot find other files of course)

  Wasn't really sure that this should be classified as, but it's a Windows program...

  I have created a web browser in Visual Studio 2012, just for the program and want to know how to record properly so that I can run on a machine that is completely different as a browser.

  I went through all the folders to get the .exe file, but it does not work if I move the file on my desktop (it cannot find other files of course)

  Best to ask this question in a visual studio forum

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vsarch, vsdbg, vstest, vstfs, vsdata, vsappdev, visualbasic, visualcsharp, end

• How to record producer in an AVI file

  How to record producer in an AVI file

  How to record producer in an AVI file

  ===========================================
  If you are running Movie Maker 2012 you can save as WMV
  or MP4. Then you can convert the file to AVI format.

  ===

  Already posted by: Leonard_Su

  1. Open Movie Maker and open the project file, you (.wlmp)

  2. in the window of the program, press these keys on your selection of keyboard ALT + F
  Save Movie and choose recommended for this project.

  3. once choose your preferred destination where you want to save the
  film.

  4. change the name of the movie file and the file format of the film. (You can
  choose. WMV or MPEG-4 If you are using the latest version of Movie Maker
  2012 if you choose. (WMV)

  5. click on the button Save.

  ===

  There are to many converters available on the net...
  Some are free, some details... the following freeware
  is but one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7 / 8)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your video files on the main screen.

  Or... Click left on the video button and navigate to the
  your video files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When video files are imported into Freemake,
  On the left, click the icon of the AVI at the bottom of the screen.

  The 'AVI output settings' screen opens.

  Choose a folder ' save in ', so you can find the
  converted files.

  On the left, click the "Convert" button and wait for the files
  to convert.

  ===

  If you install an earlier version of the Vista Movie Maker... you
  can record in DV - AVI.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Movie Maker 6.0 on Windows installation 7 or 8
  http://movies.blainesville.com/2010/05/installing-Windows-Movie-Maker-60-on.html

  Windows Vista Movie Maker 6... record to DV - AVI

  Reach... Folder / publish movie / this computer.
  Enter a file name and choose a save location.
  Next / additional settings / DV - AVI (NTSC) / Publish.

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

• How the records are selected in the database

  Hello

  How the records are selected in the database

  
  

  Thank you.

  Read articles on JDBC, here is what I understand...

  If I set LignesMax = 1 (in out select adapter DB) and I have 30 record in the table that satisfy the select query then what line is picked up? the first in the table or randomly any folder?

  The query returns the first line of the result set.  Not just a random line.  However, to get the rows to return in the result set in a specific order, you must include an order by clause, or the query will return rows in random order.

  And if I set LignesMax = 0 (unbounded, means any number registration) in this case if my select query satisfy 100 million documents so all million records will be picked up once, in one cycle?

  The answer to this depends on the size of the extraction of the query.  If the size of the extraction is > = 100 million, everything goes back in a single cycle of the DB.  If< 100="" million,="" then="" it="" will="" be="" divided="" into="" multiple="" trips="" to="" the="">

• I saved my adobe files temporarily muse in my computer when I restart my PC I see not the mt files, please tell me how to recover my files and how to record my entire Web site file using save option.

  I saved my adobe files temporarily muse in my computer when I restart my PC I see not the mt files, please tell me how to recover my files and how to record my entire Web site file using save option.

  When you talk about 'temporarily' as record files in the temporary folder and then by restarting the machine will lose files. You can save the file in any location stored as reader or office and then reopen the case should show all of the content without any loss.

  If the files are deleted or lost there's no way to recover those, sorry if this is the case.

  Thank you

  Sanjit