How to recover the backup of user data DVD

Similar Questions

• How to make the backup recovery onboard cd - dvd burner drive

  How to make a backup recovery drive cd - dvd drive integrated with windows 7 Professional?

  How to make a backup recovery drive cd - dvd drive integrated with windows 7 Professional?

  You can do a repair disk or an image of the system - the two are below.

  Create the system repair disc

  1. Open backup and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking the backup and restore.
  2. In the left pane, click on create a system repair disc and follow the steps. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Create a System Image in Windows 7

  After you install and activate Windows 7 create a system image as a backup of your current computer in case you need to reinstall it. This will restore your computer to its exact state when the image has been made - which will save you the trouble of having to reinstall Windows 7 and installed everything currently again, and it takes much less time to do.

  1. click on the Start Menu and type "Save", and then click Backup of your files.

  2. in the Control Panel window that appears, click the blue link to the image.

  3 create a system image window should pop up.  Select which hard disk, DVD, or network location, you'll save your image.  Click next to continue.

  4. on the next page, check disks in your system and your system for.  Once you have selected the drives, click next to continue. Note: You can select as many records as you want (if available), but you choose to include means to the greater will be the size of the image.

  5. the next window is just a review, make sure everything is correct, and then click Start backup to start the process.  It may take 10 minutes or more, so patience is needed.

  6. once the backup is complete, you will be asked with the option to create a system repair disc.  It's a good idea, just in case your system has problems in the future.  Click Yes.

  7 choose which drive to record the disc you use to burn the disc.  Insert a CD or a blank DVD for the physical disk, and then click on create disc.

  How to restore Windows 7 from a System Image

  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

• Captivate - interrupted due to the error. How to recover the backup file?

  While the work on Captivate, I met this error message.  I was not able to save the project, I was working on when this error came.

  

  How can I recover the project upwards? Where is file '.cpbackup '?

  Enable you the creation of backup in the preferences? If so, you should find

  the backup file in the same folder as your normal projects.

• How to recover the server response XML data

  Hey fellows,

  So I wrote this piece of code that sends an image to a server (thanks a lot Mantaker for the position you where has written on it!) and then I expect to receive a response in the form of XML code. I tried to use getResponseMessage(), which gives me a nice 'OK '.

  How could I achieve this? I read somewhere that it might be possible through a feed, could you help me?

  I'll give you a lot of congratulations!

  If you already have the basics of an HttpConnection down, it gets a little easier later.

  Once you have the your HttpConnection InputStream you can create a Document for analysis using the built-in XML parser.

  public static Document getXmlDoc(InputStream in)
  {
      Document doc = null;
      DocumentBuilderFactory docBuilderFactory
          = DocumentBuilderFactory.newInstance();
  
      DocumentBuilder docBuilder;
  
      try {
          docBuilder = docBuilderFactory.newDocumentBuilder();
          docBuilder.isValidating();
  
          doc = docBuilder.parse(in);
          doc.getDocumentElement().normalize();
      } catch (Exception e) {
          System.out.println("getXmlDoc Error: " + e);
      }
  
      return doc;
  }
  

  It is a basic function that I use to read a XML from a web server. If there are errors reading or parsing of the document, this function returns null.

  After making sure that you close your InputStream, you can start reading your document.

• How can I recover the modules and their data from a failed HARD drive (the lost BONE areas, but data files are readable)?

  The HARD drive that was my OS (Windows XP Pro SP3) failed and lost quite a few areas which are essential for the operating system running. Other data is still readable. A got another HARD drive and installed Windows XP SP2, Firefox and other programs. I was able to retrieve the bookmarks, security certificates, and other profile information using the information found in bandages.

  None of them addressed how do to recover the modules or their data. Specifically, there are several large, elegant scripts that took months to develop and customize.

  Articles related to migration and other do not work for me because they require the old copy of FF is functional, that is not because the OS on this HARD drive is damaged. Is it possible to recover these data, similar (or not) about how I could get the other profile info?

  Have you copied the entire folder C:\Documents and Settings\username \Application Data\Mozilla\Firefox\ on the old drive?
  If this is not the case, can you?
  If so, make a copy and save this folder just in case.

  If so, you could replace this folder on the new facility by \Profiles\ [with your profiles inside] folder and the profiles.ini file [delete all other files / folders that may also be in the folder "Firefox"] -and then replace with the same folder named from the old failed drive. Note that you will lose what you already have with the new installation / profile!
  Your profile folder contains all your personal data and customizations, including looking for plugins, themes, extensions and their data / customizations - but no plugins.
  But if the user logon name is different on the new facility that the former, any extension that uses an absolute path to the file in its prefs will be problems. Easily rectified, by changing the path to the file in the file prefs, js - keep the brake line formatting intact. The extensions created after the era of Firefox 2.0 or 3.0, due to changes in the 'rules' for creating extensions usually are not a problem, but some real old extensions that need only "minor" since that time can still use absolute paths - even though I have not seen myself since Firefox Firefox 3.6 or 4.0.

  View instead of 'Modules' I mentioned the 4 types of 'Modules' separately - Plugins are seen as 'Add-ons', but they are not installed in the profile [except those mislabelled as a "plugin", when they are installed via an XPI file], but rather in the operating system where Firefox 'find' through the registry.

  Note: Migration articles can tell you do not re - use the prefs.js file, due to an issue that I feel is easily fixed with a little inspection and editing. I think you can manage that my perception is that you have a small shovel in your tool box, if you encounter a problem you are able to do a little digging and fixing problems with the paths to files - once you have been warned.

  Overall, if you go Firefox 35 35 or even Firefox 34 to 35, I don't think you will run in all the problems that you can not handle [that I cross my fingers and "hope" that I'm not on what it is obvious].

  With regard to the recovery of the 'data' for individual extensions - there are many ways that extension developers used to store their data and pref. The original way should save in prefs.js or their own file RDF in the profile folder. While Firefox has been developed more, developers started using their own files in the profile folder. And because Mozilla has started using sqlite database files in Firefox 3.0, Mozilla extended their own use of sqlite, as have extension developers.
  Elegant uses the file stylish.sqlite to store 'styles', but something in the back of my mine tells me that 'the index' maybe not in this file with the data. But then again, I can be confusing myself a question I had with GreaseMonkey awhile back where I copied the gm_scripts folder in a new profile and with already installed GreaseMonkey but with no script. These GM scripts worked, but I could not see them or modify them - they do not appear in the user GM extension interface window in Firefox.

• How to restore the backup of the data on XP home?

  * - Original title - install the program on XP home backup and backup of the file made by XP pro

  My XP Pro Dell crashed and burned it was 12 years old, tho...  I had a Dell with XP home rebilt.  The backup program downloaded will install a backup file to the XP machine at home, if the backup was performed with the XP Pro? Currently, the backup is always on my external hard drive. I don't know how to get to a particular file, that I need it. D. Anna

  Hello

  1. which backup program did you use to back up data?

  2A the successful backup?

  3. What is the size of the data backed up?

  Method 1.

  1. open the backup or Restore Wizard.
  2) click Next , and then select restore files and settings.
  3) click Browse to open the Open the backup file box.
  (4) click on Browse and Select the catalog file to dialog box appears.
  (5) select the backup file, and then click Open. (The name and the path to the backup file are now displayed in the dialog box, Open the backup file .)
  6) click OK in the dialog box, Open the Backup file . It is added to the list of backup files in the backup or Restore Wizard.
  (7) in the list on the left, expand the different backup files, and select the drive or folder to display the details of the backup in the right pane.
  (8) select the files or folders to restore from the list on the right.
  9) click Next to view a summary of the restore operation.
  10) click Finish. The Restore in progress dialog box appears.
  11) click the close button in the Restore in progress dialog box.

  Method 2.

  1 - click on the "Start" button, click on "Accessories", click on "System tools," then "Backup" and then click on the button "next".

  2 - Select "Restore files and settings" and then click on the button "next".

  3 - Access your backup using the pane on the left side, then select the folders you want to restore. Navigate in this pane by clicking on the symbol '+' next to the names of folders until you reach the folder that contains the backup. Click on the button "next".

  4 - Click on 'Finish' button and then click 'close' once the full backup restore.

  Refer.

  How to use the backup utility to back up files and folders in Windows XP Home Edition: http://support.Microsoft.com/kb/320820

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/restore_overview.mspx?mfr=true

  Backing Up and Restoring Data: http://technet.microsoft.com/en-us/library/bb457113.aspx#EBAA

  I hope this helps.

• How to recover the data pin and a location for visitors to the Web site

  need help

  I'm doing a project with asp.net blackberry

  How to recover the data pin and a location for visitors to the Web site when he pressed the button on the web using asp.net?

  so far, this is the only code that works for me to get a location in a web widget:

  http://docs.BlackBerry.com/en/developers/deliverables/17954/CS_Retrieving_a_GPS_loc_by_using_a_web_p...

• How to recover the PSADMIN State of origin user profile?

  People,
  
  Hello. My user ID to log in the application designer is "PSADMIN". I just created PIA. "http://localhost/psp/ps/?cmd=login" accesses PeopleSoft access code page, and I use "PSADMIN" to connect. I can open all web pages after login. "PSADMIN" is the access profile and user profile.
  
  But after I create a "newUser" role and assign a list of the permissions for the role, then the role "newUser" a link to the user "PSADMIN" profile, I can't open most web pages after login in PeopleSoft signon page using "PSADMIN". The system get the message: "you do not have access to the collection of Navigation. Please contact your portal administrator.
  
  Can any people tell me how to recover the profile user "PSADMIN" State of origin so that all web pages open after the connection?
  
  
  Thank you.

  go to PIA by using a root as VP1 or PS user and remove what you added to the PSADMIN.

  If you have locked your root user by chance... unlocked by using backend.

  PSOPRDEFN TABLE, unlock root user using the acctlock update.

  then sign in using that and make changes to the PSADMIN. or just the background, you can delete the additional role of PSADMIN profile using the same table.

• How to decrypt the backup file

  Hi all

  I need to know how to decipher the backup file (ACS 5.3) on the desktop. Below is relevant for once you import the file to restore. However, my problem is to extract the file to your desktop

  ============================================================

  GBA backup encryption

  Backup of the ACS is now encrypted using a password of dynamic encryption. The user is prompted for an encryption password when executing a backup operation. ACS encrypts only the ACS data by using a dynamic encryption key. CARS and the ACS view data is encrypted using a static key. That is why ACS invites to enter a password for encryption when you perform a backup that contains the data of the ACS. The user is prompted for a password for decryption while restoring a backup that contains the data of the ACS.

  When you run a backup in ACS, ACS uses the static to encrypt key the CARS and the ACS data and actually a file of .gpg while GBA backup data is saved inside this file as file separate .gpg .gpg using the dynamic encryption password. When you restore the full backup, ACS invites for the decryption password decrypt the backup ACS data. ACS decrypts the data from CARS and display ACS data using the static key.

  The encryption password must have:

  • a minimum of 8 characters
  • no more than 32 characters
  • letter at least one capital letter.
  • at least a tiny.

  «Special characters are allowed except "'", "$", "(" et "") "» ACS displays the password strategy if the entered password does not meet password requirements.

  ===========================================================

  for people who would ask "Why I want to do this": it's policies related audit password standards

  Hello

  I can't think about a way to recover your files, it's to restore the file to a temp ACS server can generate a backup that is not encrypted.

  I would say we can decrypt the file on your desktop if we know the method that was used to encrypt it. I think that this information is not provided anywhere in the doc of cisco.

  Kind regards

  Amjad

• How to recover the lost password windows 7

  original title: password windows 7

  How to recover the lost password windows 7

  Hi Karrah,

  You can try to check if you have any other user account on the computer and try to connect to this account and change the password for your user account.

  You can also access the link below to learn more about Microsoft's strategy concerning lost or forgotten passwords.

  http://support.Microsoft.com/kb/189126

  If you do not have any other user account on the computer, you may need to back up your data and contact the manufacturer of the computer for restore to factory settings or reinstall the operating system.

  I hope this helps.

  Thank you and best regards,

   

  Srinivas R Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to recover the database when archive some of the log file are deleted.

  I am facing a problem with the Oracle database, which is linked to archivelogs.
  Our development database is running in archivelog mode, but we don't have safeguards and have no recovery catalog.
  When the database was in running, disk got full, so some archivelogs were deleted manually.
  After that they have restarted the DB, and DB now not come. The errors are as follows:
  
  -------------------------------------------------------------------------------------------------------------
  
  
  SQL > startup
  ORACLE instance started.
  
  Total System Global Area 1444383504 bytes
  Bytes of size 731920 fixed
  486539264 variable size bytes
  956301312 of database buffers bytes
  Redo buffers 811008 bytes
  Mounted database.
  ORA-01589: must use RESETLOGS or NORESETLOGS option of database open
  
  
  SQL > alter database open resetlogs;
  ALTER database open resetlogs
  *
  ERROR on line 1:
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / export/home/oracle/dev/ADVFRW/ADVFRW.system'
  
  
  SQL > recover datafile ' / export/home/oracle/dev/ADVFRW/ADVFRW.system'
  ORA-00283: cool cancelled due to errors
  ORA-01610: recovery using BACKUP CONTROLFILE option must be
  
  
  SQL > restore database using backup controlfile;
  ORA-00279: change 215548705 generated at 2008-09-02 17:06:10 needed for thread
  1
  ORA-00289: suggestion:
  /export/home/Oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.arc
  ORA-00280: change 215548705 thread 1 is in sequence #1107
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  /export/home/Oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.arc
  ORA-00308: cannot open archived log
  ' / export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
  ORA-27037: unable to get file status
  SVR4 error: 2: no such file or directory
  Additional information: 3
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  Cancel
  Cancelled media recovery.
  SQL >
  
  -------------------------------------------------------------------------------------------------------------
  
  
  1 how to recover the database and put online
  
  Any help will be much appreciated.
  
  Regarding
  Hemant Joshi
  
  Published by: hem_Kec on 7 Sep 2008 09:07

  Hello

  It is actually quite easy.
  We knew that Oracle was looking for logsequence 1107. There is no archived log, it was deleted, or it has never generated. As you delete files, the 1st solution would be possible, BUT as there was only an instance crash so more old archived logs is not required for crash recovery. There is a need during the restoration of the old backup files, which is not our case.

  Thus, the missing log sequence has not been archived = > it is a redo log.
  To identify the required online redo log, we just to log query v$ as I suggest.

  Once the log identified file, we can recover it by specifying the redo log when you ask logsequence 1107.

  And it is on. We win! :)

• How to recover the sparsebundle workspace?

  Hi all

  EL Cap 10.11.5

  I made a my.sparsebundle which was for 2 GB

  - then I almost filled

  - then I deleted 50%

  - then run the Terminal command

  -Recovered 0 bytes

  -so I've removed everything inside and running the command again

  -always it recovered 0 bytes

  Q How do this work?

  -------

  How to recover the sparsebundle workspace?

  I went to the terminal and type:

  hdiutil compact /Users/me/Documents/my.sparsebundle

  and he succeeded, but said regenerated = 0 bytes of 48.9 MB possible.

  s http://blog.fosketts.NET/2015/07/22/how-to-use-Mac-OS-x-sparse-bundle-disk-image.

  rse-bundle-when-hdiutil-compact-is-not-e http://Apple.StackExchange.com/questions/54607/completely-recover-space-from-Spa...

• How to recover the complete installation of NDK IDE SDK?

  I just downloaded the gold 10.1, my NDK 10.0 and 10.1 in the same place. I have not updated my device and the IDE does not compile because the target device has older software.

  Now, I want to know how to recover the SDK outside of a full installation of QNX IDE. I just need an IDE if I could use several software development kits, and the IDE itself must have consumed a lot of HARD disk space.

  I like to keep the SDK installers so I can install them even without an internet connection (if I have to in the future). Someone can tell me how to recover (only the development kit) SDK full QNX IDE install and use with IDEs installed?

  I noticed that in the advanced SDK properties, there are two folder paths: Tools SDK and the Platform SDK. Can I copy these two files and use them also?

  If you still have the copy of the previous version of the sdk (two files 10.0 installation directory, host_10_0_10_536, and target_10_0_10_672 example), and if you are on Windows 7, you can copy these two files to the 10.1 installation directory and go to C:\Users\\AppData\Local\Research In Motion\BlackBerry Native SDK\qconfig and play a bit with .xml files that match the target sdk 10.0 (just in) change these two folders location paths).

  If you do not have a copy of them, the best solution is to click on the refresh icon and install the sdk that corresponds to your os from the target device.

• How to judge the backup set is available (with RMAN)?

  Hi all, after you back up the database, how to judge the backup set is available?
  
  SQL > SELECT * FROM V$ VERSION;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for Linux: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production

   rman target /
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Mon Jul 9 12:28:51 2012
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: CATDB (DBID=2328696599)
  
  RMAN> crosscheck backupset;
  
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=24 device type=DISK
  crosschecked backup piece: found to be '*AVAILABLE*'
  backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\BACKUPSET\2012_06_14\O1_MF_NNNDF_TAG201206
  14T153439_7XMHL0JL_.BKP RECID=34 STAMP=785950480
  crosschecked backup piece: found to be '*AVAILABLE*'
  backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\BACKUPSET\2012_06_14\O1_MF_ANNNN_TAG201206
  14T153546_7XMHN2C6_.BKP RECID=35 STAMP=785950546
  crosschecked backup piece: found to be '*AVAILABLE*'
  backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785950547_7X
  MHN4MH_.BKP RECID=36 STAMP=785950548
  crosschecked backup piece: found to be '*AVAILABLE*'
  backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785953535_7X
  MLKN66_.BKP RECID=37 STAMP=785953539
  crosschecked backup piece: found to be '*AVAILABLE*'
  backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785971797_7X
  N4D6YF_.BKP RECID=38 STAMP=785971798
  crosschecked backup piece: found to be '*AVAILABLE*'
  backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_29\O1_MF_S_787249342_7Y
  V4001O_.BKP RECID=39 STAMP=787249359
  Crosschecked 6 objects
  
  RMAN> list backupset;
  
  using target database control file instead of recovery catalog
  
  List of Backup Sets
  ===================
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ ---------------
  26      Full    320.44M    DISK        00:01:03     14-JUN-12
          BP Key: 34   Status: AVAILABLE  Compressed: YES  Tag: TAG20120614T153439
          Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\BACKUPSET\2012_06_14\O1_MF_NNNDF_TAG201206
  14T153439_7XMHL0JL_.BKP
    List of Datafiles in backup set 26
    File LV Type Ckp SCN    Ckp Time  Name
    ---- -- ---- ---------- --------- ----
    1       Full 3712551    14-JUN-12 D:\ORACLE\ORADATA\CATDB\SYSTEM01.DBF
    2       Full 3712551    14-JUN-12 D:\ORACLE\ORADATA\CATDB\SYSAUX01.DBF
    3       Full 3712551    14-JUN-12 D:\ORACLE\ORADATA\CATDB\UNDOTBS01.DBF
    4       Full 3712551    14-JUN-12 D:\ORACLE\ORADATA\CATDB\USERS01.DBF
    5       Full 3712551    14-JUN-12 D:\ORACLE\ORADATA\CATDB\CATMETADATA01.DBF
    6       Full 3712551    14-JUN-12 D:\ORACLE\ORADATA\CATDB\UNDO2.DBF
  
  BS Key  Size       Device Type Elapsed Time Completion Time
  ------- ---------- ----------- ------------ ---------------
  27      99.50K     DISK        00:00:00     14-JUN-12
          BP Key: 35   Status: AVAILABLE  Compressed: YES  Tag: TAG20120614T153546
          Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\BACKUPSET\2012_06_14\O1_MF_ANNNN_TAG201206
  14T153546_7XMHN2C6_.BKP
  
    List of Archived Logs in backup set 27
    Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
    ---- ------- ---------- --------- ---------- ---------
    1    47      3712495    14-JUN-12 3712583    14-JUN-12
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ ---------------
  28      Full    9.45M      DISK        00:00:02     14-JUN-12
          BP Key: 36   Status: AVAILABLE  Compressed: NO  Tag: TAG20120614T153547
          Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785950547_7X
  MHN4MH_.BKP
    SPFILE Included: Modification time: 14-JUN-12
    SPFILE db_unique_name: CATDB
    Control File Included: Ckp SCN: 3712594      Ckp time: 14-JUN-12
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ ---------------
  29      Full    9.45M      DISK        00:00:07     14-JUN-12
          BP Key: 37   Status: AVAILABLE  Compressed: NO  Tag: TAG20120614T162535
          Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785953535_7X
  MLKN66_.BKP
    SPFILE Included: Modification time: 14-JUN-12
    SPFILE db_unique_name: CATDB
    Control File Included: Ckp SCN: 3715284      Ckp time: 14-JUN-12
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ ---------------
  30      Full    9.45M      DISK        00:00:02     14-JUN-12
          BP Key: 38   Status: AVAILABLE  Compressed: NO  Tag: TAG20120614T212957
          Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785971797_7X
  N4D6YF_.BKP
    SPFILE Included: Modification time: 14-JUN-12
    SPFILE db_unique_name: CATDB
    Control File Included: Ckp SCN: 3735186      Ckp time: 14-JUN-12
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ ---------------
  31      Full    9.45M      DISK        00:00:23     29-JUN-12
          BP Key: 39   Status: AVAILABLE  Compressed: NO  Tag: TAG20120629T162221
          Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_29\O1_MF_S_787249342_7Y
  V4001O_.BKP
    SPFILE Included: Modification time: 29-JUN-12
    SPFILE db_unique_name: CATDB
    Control File Included: Ckp SCN: 5138750      Ckp time: 29-JUN-12
  

  Please do not forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Published by: Julien Hesenov on July 9, 2012 12:42

• How to find the number of users connected to the database of the level operating system (Linux)

  Hi all
  
  Could someone knows how to find the number of users connected to the database without connection with sql * more
  
  y at - it a command to find?
  
  example, we have 10 databases in a server, how to find the number of users connected to the special data base without connecting to database(v$session)?
  
  the Oracle version:-10g, 11g
  Operating system:-OEL4, OEL5, AIX, Solaris
  
  any help will be appreciated.
  
  Thanks in advance.
  
  Thank you.
  
  Kind regards
  Rajesh.

  but you can say total number of connection with the above given the command? It would also be useful to know.

  See you soon,.
  LKM