How to reinstall the Windows 7 upgrade on vista for new installation or in the event of system failure?

Similar Questions

• Random BSoD occurrences, can not read the message because no option to put an end to restart in the event of system failure.

  My girlfriend has a HP dv4-1465dx experiencing hardware problems, the laptop will be blue screen randomly and then restart 1-3 seconds later. When you restart the laptop reads, "No boot device - insert boot disk and press any key." If the laptop is turned off and turn it on again, it works fine, until the next BSoD. The first time that this error the hard drive was seized up, unable to enter a bank hard disk enclosure repair attempts that forced me to buy a new one.

  I tried the bios of an option to disable the restart in the event of system failure so I could read the error message, but it only gave me discover that HP has less useful bios in the world and that no such possibility existed; Yes I have updated the bios. Start/hardware error logs contained no data also, what so ever.

  The hard drive is fine, I ran it in my office for several days. a BSoD happens within his laptop several times a day.

  I don't know what to do at this point is that I have nothing to work outside of, I hope someone has a useful idea. The laptop is no longer under warranty, but this is ridiculous, how fast this thing is falling apart (literally... screws are only randomly drop the case).

  Yes I really don't think that this is the case. As mentioned above is not my laptop so I'll probably wait until he decides to restart not at all before eventually taking an iron to be welded to it. Thanks for all the information, assume that nothing can be done at this stage.

• HP DV7T-2000: Windows 7 Upgrade from Vista for an HP laptop

  The installation will not proceed because the software and the computer "reads" the computer is running the battery power and it is not connected to a power source. My computer is "connected" and the battery remains entirely motorized. Indicator power where the power source is connected to the computer is not "informed", but the battery remains @ 100% charge while the computer was turned on for seven hours. Is there a way to get around this? I use Windows 7 and not Vista?

  IF that's true then remove the battery and just run with the AC adapter and see if this is the case?

• After disk hard crash, loaded Windows 7 and get "Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations.

  Original title: Windows Vista product key used for any new installation.

  I bought the upgrade from Windows 7 Home Premium to Windows Vista CD, then had a hard drive crash, then installed a new hard drive. Load the purchased Windows 7 on new hard drive, now I get the message '... Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations. That means that I have to load Vista on the new hard drive, and then update? Both for the end user (paying customer) hostile.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If you do not have your Windows Vista installation media, you can download a fresh copy:

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)		Windows Vista (x 64)
  X 14 - 63452.exe	X 14 - 63453.exe
  Boot.wim	Boot.wim
  install.wim	install.wim

  Installation instructions (creation of bootable DVD/USB)

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once you have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB flash drive (USB FlashDrive recommendations, see here).

  

  FF

• On Windows 7 upgrade from vista 64 bit stops after that it says the settings and files of collection

  I am tring to install Windows 7 upgrade from vista 64-bit.  I'm to the point where it says collect files and settings, and it stops running, and then in the details it shows 3 files located in the c: users\my name\appdata\local\temp\WER followed by numbers.tmp, then version, appcompat or mdmp. (example: wer5090.tmp.version.txt)  He said that these files are the reason. Any ideas how to solve this problem?

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  If the upgrade continues to fail, you might want to consider doing a custom installation:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• How to reinstall the operating system on a Curve 8310 blackBerry smartphones?

  There seems to be missing elements of my OS (vs 4.5.0.182).  How can I reinstall the original operating system to get everything working again?

  Hello and welcome to the community!

  From a PC, you can install any compatible OS package (for example, for your exact model of BB number) to a BB via this procedure:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

  Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC. You can even use a different OS package carriers simply insert, between steps 1 and 2, the deletion, on your PC, a file named PROVIDER. XML. remember that you remove from your PC, no matter what other packages devices OS BB as having more than one installed on the PC can cause conflicts with this procedure.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• I don't know how to reinstall the Qualcomm-Atheros Bluetooth Suite (64)

  Hello

  A time back I refreshed my PC and it removed some applications including the Qualcomm-Atheros Bluetooth Suite (64). So every time that windows update tries to install important updates to update it doesn't work and I don't know how to reinstall the suite Bluetooth, I visited the Qualcomm-Atheros site but could not find anything. Any help would be greatly appreciated that this issue is also slow down the laptop which is annoying when I'm trying to do homework.
  Thank you.
   
  Original title: support Bluetooth

  Hello

  Thanks for the reply.

  I suggest you refer to Microsoft KB article to resolve the problem with the Windows updates.

  Error 0 x 80070005 in Windows Update when you try to install updates

  http://support.Microsoft.com/kb/968003/en-us#

  Note: Follow the steps under Windows 8.1 and Windows 8.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Thank you.

• What will be needed to CCS, lr, ps (uninstall/reinstall) with Windows 7 upgrade to 10? What preparedness is recommended?, what will be needed to CCS, lr, ps (uninstall/reinstall) with Windows 7 upgrade to 10? What preparedness is recommended?

  What will be needed to CCS, lr, ps (uninstall/reinstall) with Windows 7 upgrade to 10? What preparedness is recommended?, what will be needed to CCS, lr, ps (uninstall/reinstall) with Windows 7 upgrade to 10? What preparedness is recommended?

  Disconnect from the cloud on the machine that is being upgraded before you start the upgrade process.

  When the system is upgraded you can install the Cloud service in the same way that you did initially.

• I deleted pages by error, anyone know how to reinstall the pages? Thank you!

  I deleted pages by mistake with mackeeper, anyone know how to reinstall the pages? Thank you!

  First - get rid of MacKeeper - it will wreak havoc with your Mac. This is an absolute piece of garbageware. See this link for full instructions:

  How can I remove mackeeper to my macbook pro

  For re - download pages to your Mac, open the Mac App Store, and then click "buy". You should see that pages listed there with the button download beside him.

  Good luck

  GB

• I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional?

  I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional.

  Thank you

  Dee

  Check maual of the user of the ignition key (e.g. F11) you need to press on when you first ask the computer to access the XP restore partition. If you have a "restore CD" the game that the BIOS so that the CD-ROM drive is the 1st device to start, followed by the hard drive. then power on the computer and "press any key" when prompted to start the installation.

  J W Stuart: http://www.pagestart.com

• How to reinstall the file MSVC90.dll

  My computer cannot read the real player as it says im lack the file above. some can guide me on how to reinstall the file.

  Hi tonyuniformat

  
  You have Microsoft Visual C++ 2008 installed on the computer?

  
  Method 1:

  You can try to reinstall the program and check if that helps.

   

  Method 2:

  If the problem persists you can check if you install Microsoft visual C++ 2008 helps that solve you the problem. Refer to the below link to install the same.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

   

  I hope this helps.

• How can I disable Windows 10 upgrade notice?

  * Original title: 10?

  How can I disable Windows 10 upgrade notice?

  Microsoft Official method-->

  How to manage Windows 10 notification and update options

  Another (perhaps easier to use) method--> GWX Control Panel

• How to remove the load operating system prompts for options in Dual boot

  Original title: remove the extra operating system - without a rear-updisc!

  I need to remove an additional laptop operating system, but don't have not a disk of re - install the operating system, I don't want.

  I bought a laptop with Windows Vista. My father also uses the laptop, but hate Vista, so it has installed an older operating system. Fortunately now he has his own laptop, and I am free to remove the old operating system (it slows things down!). How can I do this without a backup of Windows Vista disk?

  Thanks for any advice.

  Hello

  I suggest you go through the steps and check if it helps.

  Right click on my computer

  (a) click on properties

  (b) go to the Advanced tab

  (c) click on settings under startup & recovery

  (d) change the seconds to display the operating system to 0

  (e) to the operating system you want to start the default operating system to help the drop drop-down

  (f) click Ok

  (g) click on apply

  (h) click Ok

  I would also ask you to contact the manufacturer of the hardware for the recovery media. You can also check if the system has a recovery partition, and if so, try to access, which will reinstall the original operating system.

  See also:

  http://support.Microsoft.com/kb/888023

  I hope this helps.

• Windows 7 upgrade from Vista crashes at 72%.

  My Windows 7 upgrade from Vista stopped at 72%. After the reboot, I am unable to restore or continue the upgrade. Portable computer continues to restart, but still ends upward with the error message. "The computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and then restart the installation. "No disk Windows 7. Only received online.

  Hello cdrudd, welcome.

  We start back up your data first, if you have a Windows Vista recovery or install CD/DVD, try this:

  1. connect an external drive or flash drive
  2. place the CD of Windows Vista in the status bar, and close
  3 boot the disk and choose "repair my computer".
  4 choose "Command Prompt"
  5. type the following command:

  CD c:

  | Come in

  users of CD

  | Come in

  dir

  | Come in

  From here, take note of what your user name folder name. Then type...

  copy c:\users\yourusername e:\users

  | Come in

  * ' e' will be the letter of your external device. It could be F, G, H or so now (according to which drive letter was already used)

  Once the copy is complete, you can pretty much use the following commands to keep the rest of the data:

  copy c:\program files e:\program files -copy everything in the folder program files

  You can use the dir command to view the contents of a directory. Then, you can use the cd command to navigate to a directory.

  Let us know if you have a copy of your user data backup job. Please let us know if you have any questions.

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• If someone UN-install/reinstall the XP operating system for a new beginning and not use any old files more than cure someone of a problem of malware/malicious?

  If someone UN-install/reinstall the XP operating system for a new beginning and not use any old files more than cure someone of a problem of malware/malicious

  Reformat the disk and reinstall Windows XP would heal any problem of malicious program with the exception of an infected MBR (Master Boot Record) on the disk.   The F-Secure rescue CD is a tool that allows to remove a MBR infection.