USB 3.0 on Toshiba laptops

Similar Questions

• Whenever I plug my iPhone into a USB port on my Toshiba laptop, I get a message «overload the hub»

  Whenever I plug my iPhone into a USB port on my Toshiba laptop, I get a message «overload the hub» I tried to reset the ports using the Device Manager, but it does not work. Can someone help me solve this problem?

  This means that the phone ends so much power that the ports are closed to avoid damage to your laptop.  Get a USB hub powered (the one that plugs into your computer and comes with an adapter to plug into the wall) to provide more power, or less plug items on your USB ports at the same time.

• Windows 8 on PC Toshiba laptop installs the drivers, but will not print on printer J4680 via USB

  Install windows on a Toshiba laptop 8. Installed the drivers for a printer Deskjet J4680 0n LPT1 through a usb cable.  Install looks like it is complete and presented in the material, but not in Word 2010.  In settings displays error. Don't know where to look for error, no code.

  KCC

  Suggest that you only contact HP.  We do not support hardware and software from Microsoft.

• External charger for Toshiba laptops

  Basically, I have a toshiba laptop and the connection between the charger and the laptop real is in ruins, I had this problem before and found better to just get a whole new laptop, is there not an external charger that I could buy that would work or at least a way to get my pictures off of it?
  Thank you.

  This charger doesn t exist.

  Jurgo is quite right. For a few Euros you can buy external enclosure for SATA HDDs. put your HARD drive in this case and connect it to the USB cable and another PC / laptop as external drive.

  On this way, you will have full access to all your stored data.

• How to see pictures of my camera ge on my computer toshiba laptop Windows xp

  How to see pictures of my camera ge on my computer toshiba laptop Windows xp

  How to see pictures of my camera ge on my computer toshiba laptop Windows xp

  ====================================
  Something to try...

  Connect the device to your PC via a USB cable and turn
  on the camera... If open windows... Close them.

  According to... to... Start / my computer... the camera can be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / desktop media slots...
  Drive should be listed under... "Removable disk" with a drive
  letter.)

• Computer Toshiba laptop XP runs very slow, how can I speed up?

  I have an old Toshiba laptop with Windows XP, Version 2002, Service Pack 3. There R Pentium 4CPU, 2.40 ghz with 256 MB of Ram.

  It is so slow that it's like watching paint dry. I deleted all the programs that I dared (those I asked about) and I defrag regularly. There seems to be a lot of many programs (including Toshiba ones) are not in use, but being a non-techie I daren't delete them.

  I need help to allow him to work faster - if it is possible.

  Any help would be wonderful.

  Thanks - Chris

  * original title - old and slow *.

  Adding more ram is not a task difficult because memory ram chips simply plug in a socket on the motherboard.

  However, it can be difficult, because it requires opening the computer.   Then there that understand particular motherboard configuratoin needs when it comes to memory.

  Some motherboards have specific requirements for memory.

  so the first step is to look at the manual of the computer on the configuration of the memory section and see if you can add more ram, or if you need to get out of this little chip of 256 out and just use a larger chip, such as 1 gig of ram.   (for ordinary computer users and xp, it is not necessary to have more than 1 GB of ram installed)

  with regard to the safe mode.   you are unable to connect to the internet because it is not allowed.  However, in safe mode with networking you can, since the internet is a global network.

  the reason why security mode perform better than in normal mode, is due to the fact that non-microsoft programs, IE third party programs are prevented from loading into memory and running.

  as a result of not having other programs the windwos (by itself) is able to work ok in / with the chip memory.

  In contrast, mode normal, windows + third-party programs are loaded in your partial memory chip, and it's moving the system.

  If at this point, you could try to eliminate some of the programs that are automatically started and running in memory for windows in normal mode get an improvement in performance.

  the method is called "clean boot" and here are the steps:

  http://pcsmarties.WordPress.com/CleanBoot/

  but the above method plus adding more memory to your computer, is the way to go.

  either said by the way, if you want to perform a clean boot, make sure not to disable the start up programs for what is toshiba, like the mouse or the keyboard.

  on some laptops the mouse drivers are loaded at startup and that you have to plug a regular usb mouse for some functions of the mouse until you can re - initialize the mouse driver.

  In addition, you mentioned that malwarebytes found some infections.   Although this is a good thing, it is hoped that the infection is not one of your folders of window system corrupt.

• Toshiba laptop start registry error after manual stop

  original title: Toshiba laptop start registry error after manual stop - HELP!

  Hello, I have a Toshiba laptop with Windows Vista.  Yesterday it froze completely upward and I had to manually close (hold the power button until stop you him) twice.  The second time when I tried to restart the came Toshiba screen, then the screen with the little scroll down bar, and then it went black, waited for a while, then flashes a bluescreen with a written up VERY quickly and cycles back to the Toshiba screen.  This time after the scroll bar it gives me white saying the writing system could not restart, and I want to start normally or startup repair. If I restart it through loading files, trying to fix it and said then he wasn't able to fix it and when I look at the details there something on a registry error.

  I really need to solve this problem quickly and desperately want to save all my files if possible because it's our main Mobile family that has all our digital photos on it and they are not saved. (I know, terrible of us).  Can someone help me?

  Thank you

  Charity

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• the touchpad on my toshiba laptop with windows vista is disable and I don't know who to make it work again

  the touchpad on my toshiba laptop with windows vista is disable, and I don't know who to make it work again.

  Hello

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
  So usually loaded at the top of the screen.

  There is also usually a TouchPad control utility that loads in the Notification area next to the clock
  at the bottom right.

  Toshiba support - click Communcate for links to the Forums and Contact Toshiba.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba forums - good source of info from others who have the same system or similar
  http://laptopforums.Toshiba.com/

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Also check the control - Mouse - touchpad settings panel.

  You can also try this:

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
  The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
  (drivers), now right CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
  RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
  device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the website of the manufacturer of system (Toshiba downloads - access your model - listed above)
  and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• My toshiba laptop will not connect to my HP Envy 4500 printer

  Recently, I tried to connect my Toshiba laptop running Windows 8, wireless on my HP Envy 4500 printer. I am trying to scan something on my laptop, I did with the printer before. I have the remote app, and I have connected to the network the printer wireless displays in the wifi of my computer. However, when you try to get the printer to scan, using the option on the printer screen, it says that no device is connected, and to ensure that the software has been installed and this scan to pc has been activated. I opened the application on my laptop, in hopes of getting better results using what it was, but he told me that the printer is offline, if it was obviously on. I'm not entirely sure why the printer doesn't recognize my laptop, even if my laptop recognizes. I spent nearly two hours, disconnection and reconnection, as well as the printer off about three times. I'm about to uninstall the application and try to reinstall, but I'm questioning that results will be better.

  I don't see any other way to solve this problem, because there is no USB port to connect a USB cable don't, like myprevious printer and wonder if it is my laptop, not the printer, which is faulty. It works for printing, when it comes to other devices in my house, but I had problems same impression with my Toshiba before. I tried only with another scanning device: a desktop HP Pavilion Media Center TV PC computer. I'm starting to think that the scanner is broken to only other reognizing products HP and ask any advice to fix this problem.

  Hi AMakkei,

  Welcome to the HP Forums!

  I understand that you can't scan with your Envy HP 4500 to your laptop Windows 8, and I'm happy to help you with this problem of connection!

  To get help, I'll need to know the following information:

  • If the printer is capable of making copies of itself.
  • If the power cable plugged into a surge protector, or directly on a wall plug. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  In the meantime, please try go through this guide. A computer"not found" or a Message appears "connection error" during the scanningand let me know what happens!

  I hope to hear from you and have a nice day!

• I have toshiba laptop that missed my virus protection and my laptop a week ago has changed for the windows Classic theme, all the other themes are greyed out so you cannot select them,

  I have toshiba laptop missed my virus protection and my laptop a week ago has changed for the windows Classic theme, all other themes are greyed out so you cannot select them, my internet has also stoped working, I also can't do a system restore as it says it does not work any body can help me please?

  My laptop will also not me do a backup.

  Try these:
  METHOD 1:
  Back up all the files on a USB Flash drive or an external hard drive and re - install Windows on the hard disk of laptop.
  -------------------------------------------------------------
  METHOD 2:

  Try partitioning your hard drive and put your files there.

  1. Start menu search: 'drive '.
  2. click on create and format hard disk partitions
  3 right-click the Local Disk (C) and select shrink.
  4. According to the size of the files, we could save, choose the size you want to reduce (1000 MB = 1 GB)
  5. right click on the new "unallocated space" and create the Partition. (Name it BACKUP or something)
  6. place all your important files on the new partition, and then, when you reinstall Windows, select the Local Disk (C)
  DO NOT select the Partition you you saved on files.
  Hope that these answers are useful.

• Can I use the Windows Vista I had with my Toshiba laptop on virtual machine?

  Hey all

  I have changed Microsoft for Macintosh, but installed on a virtual machine (oracle vm virtual machine) my Windows Vista I got with my Toshiba Satellite A350D Notebook previous. I installed Vista with the recovery disk. Now he asks me the Windows Vista product key. The sticker on the back of my laptop is more readable. I run the Belarc Advisor to get the product key in this way. But right now, he said: "it's the product key installed at the factory by the manufacturer rather than yours. You can change this to your product key here for Windows http://go.microsoft.com/fwlink/?LinkId=45668"

  My question: am I not allowed to use windows vista legally, I had with my computer toshiba laptop on other devices? I won't use the Thoshiba laptop. Do I have to delete the record from the Thoshiba laptop? Where can I get a new product key?

  Maybe someone can help me here. Thank you in advance for taking your time to read this.

  Betty

  Recovery disk or recovery image is designed for some cell phone only and is not a kind of universal image that can be used on other devices. It comes with the laptop.

  You can use the Microsoft Windows disk with valid license on each device. Recovery image is not only BONES. This is the package that contains the drivers and tools specific to Toshiba and utilities.
  As you also know recovery image when you install it on your laptop must be turned on not so the license code downstairs just proves you have purchased a valid license with your laptop.
  > Should I remove the record of the Toshiba laptop?
  Not why do this?
  > Where can I get a new product key?
  You cannot get it because you need when you use the recovery image on your Satellite A300D. I think even you will hear of Toshiba.

• How to install Windows XP Professional on Toshiba laptop?

  Hi all

  I'm asking on behalf of a friend who is a Computer Phobic and has the same brand and model of Toshiba laptop than me. He would like to go back instead of Windows Vista business to Windows XP Professional.

  Its hard drive is the hard disk from Western Digital WD 1200BEVS. He told me that when he went to install Windows XP, it came with no HARD drive. I don't know if I can quote the chipset here, but here it is anyway. The chipset is an Intel(r) ICH8M ultra ata storage controllers-2850. All the advice in a simple format would be gratefull. He downloaded the bios unsuccessfully and nlite to work on a computer with some help of a computer technician on a thumb (flash) drive)

  I'm someone who can help thanking on behalf of my friend who is a Computer Phobic and does not have an interweb connection.

  Usually, if you write about these issues you inform us also what model of laptop you have, or that model As your friend.

  Please don t get me wrong, but on this forum, you can find hundreds of threads with the same theme and very good answers and solutions. You might be looking for this forum if you can find some similar thread?
  Problem missing driver SATA and this driver must be loaded before installation of WXP begins.

  But before we start the discussion is portable s friend supported for Windows XP Home edition?
  Did you check the Toshiba download page if the drivers of Windows XP Home edition are available?

  Out of curiosity: a your friend recovery disk created?

• Cloning of Toshiba laptops with sysprep

  Hello

  We have a lot of different brands and models of laptops and have a sysprep image that we use for all of them and so far had no other problem that have to update the drivers after the laptop has been photographed.

  That is until we started to buy Toshiba laptops!

  After that we photographed the laptop it blue screens with either

  PAGE_FAULT_IN_NONPAGED_AREA

  Stop: 0 x 00000050 (0xF0000223, 0 x 0, 00000002 00000000, 0x806BAF76)

  or a

  STOP 0x0000007B

  Even after the repair of the image it blue screens.

  So far, we had to build a new image for each laptop model Toshiba and then image.

  Any ideas on how I can get my sysprep image to work?

  Hi crystalreef,

  Hmm different laptops have different hardware, so I don't think you can use a single image for all mobile phones. Each computer or laptop model requires the image clean s with own drivers and isn't compatible with other models.

  You can install Windows Toshiba Recovery disk?

• Can I play my xbox one through my Toshiba laptop?

  I can play my xbox one through my Toshiba laptop, I have windows 8. I tried to connect my xbox to my laptop via a HDMI cable and no picture came on my laptop to my xbox one screen. you wonder how to do this job.

  would appreciate help on how to do this thanks.

  Hello

  As far as I know that something like this is not possible. HDMI port is for output only. You cannot send the audio and video signal to your laptop using the HDMI port and use the internal display for external devices.

• Can I connect simultaneously on Toshiba laptop to 2 external displays?

  Hello

  I am interested to know that toshiba laptop currently on offer support 2 external monitors simultaneously (one normal and then as dekstop extended in windows). I'm looking to replace my old configuration of the laptop and a station connected to two external monitors with a resolution of 1280 x 1024.

  I was looking on toshiba websita to
  Portégé R700-15 q
  http://UK.computers.Toshiba-Europe.com/innovation/product/Portege-R700-15Q/1089286/toshibaShop/false/

  with Port Replicator Port PA3680U-1PRP then some other laptop port replicator who but not the case on the site I could find if any concrete model supports the dual use of the two (VGA and HDMI or VGA and DVI) port

  I was looking on the the user guide at http://www.csd.toshiba.com PA3680U-1PRP Port Replicator
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=2756712& rpn = PA3680U & modelFilter = PA3680U-1PRP & SelCategorie = 2756711 & selFamily = 116319
  and in the troubelshouting part, I found this:

  Cannot display information to a
  DVD-D and RGB monitor to the
  same time

  Check that the cables connecting the monitors are firmly fixed on
  both ends. Some computer models don't support DVI and RGB output
  monitors simultaneously. See the documentation for your computer
  model.

  But even if you find on http://www.csd.toshiba.com the file pdf of detailed spec and user guides, there is no information on whether they take in charge simultant output to monitors or not and what is the maximum resolution supported for this.

  Thanks for any help

  Ian

  As far as I know it is not possible to connect two external displays. I know that you can only use a port. If you want to use two screens you probably external device as Toshiba Dynadock.

  Check it out.