How to replace one color with each other?
Hello
I use Photoshop Version: 2015.1.1 to change a single image. (I use the color Mode indexed with a color table custom that I created with only 8 basic colors.)
My bitmap has a black background and a border of a pixel wide red around its perimeter. I want to erase that border (replacing the Red pixels with black). I can do this with the Eraser tool, but I have to drag them all around.
I was wondering if there is a faster way to do it. If there is a tool that would allow me to click on the red border, they are automatically the Red pixels that form this border change to black, it would be great. If someone can tell me that if such a tool exists, I would really appreciate it.
I should mention that the inner part of my bitmap has red pixels I don't want to change, so I don't have to replace all the Red pixels across in your drawing. I just replace the consecutive red pixels that form the border.
Thanks in advance,
Paul
Set your foreground to black color. Select >, then edit > Stroke, 1 pixel inside, then uncheck the box.
Tags: Photoshop
Similar Questions
-
How can I replace one chart with each other?
Know it would sound really stupid. . BUT:
I have a simple page of mailing labels Avery to print. He has 30 top with a graphic [jpeg] labels in each label. I want to replace the graphics of origin by another.
The original icon is located on a layer [all 30 graphics]
I imported the new graphics on another layer on the plateau of dough. It is the right size and does not need resizing.
How can I replace all 30 graphics at the same time with the new graphics imported from the map of the dough?
I did once before and don't remember how to do it.
Tried search for it / replace it, but can't get it to 'find' the chart. There the text options but no graphics find capabilities. And may not know how to use the selection 'object '. Or there is something that I'm NOT just doing! ?? !!
Any help will be MOST appreciated. I'm on a PC [InDesign CS3]
Ellen
Hi Ellen,.
We've all been there, so not to worry.
I think it may be a limitation of CS3, if I threw my mind back, you can't do this exercise with a single click. With CS5 and CS6, multiple instances of the same file are grouped in the links Panel to allow everyone to be updated with a single click.
For CS3, once you have replaced an image, you will find may be easier and faster to select the new image with the direct Selection (white arrow in the tools Panel) tool, copy the image. Then switch to the selection tool (black arrow in the tools Panel) select one of the other boxes with the old image, right click (or control click on) and select Paste inside. Repeat this step for each of the remaining boxes which need to update. It would be perhaps faster than using the links Panel in these circumstances.
Paul
-
How to replace one table with another?
I need to replace one table with another. Both tables have the same structure, primary keys, indexes, constraints, but different data (about 50 million records).
I would like to make this replacement in line, with no passage of database in offline mode.
There is no clause CREATE or REPLACE TABLE in Oracle unfortunely.
I could use just DROP and ALTER TABLE RENAME instructions, but it is necessary that a user receive message error "table or view does not exist. It may be possible to block incoming requests at the moment, while old and new droppping table rename are performed?
Thanks in advance.Hi again!
You can detect normal users with session sessions $ v. A session of a normal user has a username (username of the column). Systemsessions PMON and SMON have no user name. So, you can use the following query to detect sessions, you need to kill:
SELECT sid, serial#, username FROM v$session WHERE type NOT LIKE 'BACKGROUND';
concerning
-
How to replace one image with another
I have a page that displays the results of a search for information about a club. One of the elements is the logo of the club. It is displayed by using the following code
< img src = "<?" PHP echo $row_clubedit ["club_logo_url"];? ">" alt = "Logo of The Club" class = "logo" title = 'in the Club Logo">
It works fine, except when no club has been selected, in which case it indicates the default polling point in a blue box.
It would be nice if I could display the Logo of the Federation, to which all clubs belong, until a club is chosen.
Y at - it a simple way to define a default image that would be replaced from a set of data.
$row_clubedit ['club_logo_url'] contains the url in the log format http://www.Club.org/clublogo.PNG
< img src = "<?" PHP echo ('federation_logo_url');? ">" alt = 'Logo of The Club' class = 'logo' title = ' The Club'c Logo ">
The logic I guess would be
If there is no such thing as club_logo_url
then print the logo of the Federation,
otherwise print the logo of the club.
How you code that in php?
I am only a beginner in PHP.
"http://www.club.org/clublogo.png": $row_clubedit ['club_logo_url'];? "". ">" alt = "Logo of The Club" class = "logo" title = 'in the Club Logo">
must be done
-
Combine one script with each other
Dear people,
This script works, only it exports to many!
Is it possible to combine part 1 2 wth?
//PART 1 > Combine this part…. try { var callExport = app.menuActions.itemByID(113411); callExport.invoke(); } catch (_) {alert(_)}; //PART 2 >.…with this part. if(app.documents.length != 0) { var myFolder = Folder.selectDialog ("Choose a Folder"); if(myFolder != null) { myExportPages(myFolder); } } else { alert("Please open a document and try again."); } function myExportPages(myFolder) { var myDocument = app.activeDocument; var myDocumentName = myDocument.name; app.scriptPreferences.version = "6.0" app.activeDocument.sections.everyItem().includeSectionPrefix = false; p = app.activeDocument.pages.everyItem().getElements(); for (i = 0; i < p.length; i++) { f = File (myFolder + "/" + p[i].textFrames.item ('jpgname').contents + ".jpg"); app.jpegExportPreferences.pageString = p[i].name; app.activeDocument.exportFile (ExportFormat.jpg, f ); } }
Thanks for all who wish to help!
Greatings from Holland.
What do you want the combination to do?
The first part, actually
app.menuActions.itemByID(113411).invoke()
, called file > export....The second part runs app.activeDocument.exportFile ().
Both export the file. In general, you should not be to invoke the menu actions in scripts if you can avoid it, they are not really designed for automation. But please explain what you are trying to accomplish. Use words much more!
-
How can I replace a color with a pattern fill?
Hi everyone, thanks for all the answers in advance!
I've created quite a detailed design that works with 4 pixels per cm and 16 colors, canvas size 120x170cm. I'm wanting to replace all one color with a pattern, is there a way to do this?
Can I replace a color with another flat color using the settings etc. but I want to meet all of an area of color with a pattern instead. The only way I can think to do would be to use the magic wand tool to select each pixel of the same color, then create a new layer and overlay with a filling of the desired design, however the design is so detailed, it would take me a terrible long to select each color!
Can someone suggest a faster way of efficiant more to do?
Thank you!
Select--> color range
Mylenium
-
How to install VMplayer 3 network for virtual machines to comminicate with each other?
People,
Hello. I use VMPlayer 3.
SE host: Windows 7
Comments to: Windows XP and Oracle Linux 5I need to set up the network and activate Windows XP communicate with Oracle Linux 5.
I followed this tutorial http://www.vmware.com/support/ws5/doc/ws_devices_serial_2vms.html to configure 2 virtual machines in Windows 7 host machine.
I tried to test 2 virtual machines in the way as below:
In Linux, [user@localhost ~] $ping WindowsXP_HostName
Release: Unknown host WindowsXP_HostName
At the Windows XP command prompt:
C:\ping localhost.localdomain
Its release: ping localhost 127.0.0.1 with 32 bytes of data...
Reply from 127.0.0.1: bytes = 32 time = 2ms TTL = 128
He meets a few times and then disconnected by itself. It seems that Windows XP is ping itself and not Linux server. The host name of the Linux server is 'localhost' as well. It is a kind of confusion for me.
From the information above, we can see that 2 VMs cannot connect between them.Can any folk provides a tutorial or example or case study to set VMPlayer 3 allowing 2 virtual machines communicate with each other by step?
Very grateful in advance.
In the guest machine, all I see is click on VMplayer-> VM-> settings-> network-> Network adapter Connection-> select Bridged: directly connected to the physical network. After that, nothing to keep.
That's it for the network card in Virtual Machine of its parameters, and the rest is done to each guest at the guest OS level.
In Windows 7 host machine, I don't see anything first.
What we need to do is to assign 3 IP addresses to 3 machines: Win 7, Win XP Guest and Linux host.
Why the world can't bring you up Google in a browser and type, the ip static windows xp, then static ip rhea of windows 7 and finally static ip. As I have already said there are more then enough tutorials on the Internet about how to configure a static IP address by a given operating system then I suggest you Google it! It makes absolutely no sense to write the instructions step by step for you when there are already dozens of tutorials available on the internet.
-
Hi, I have the browser explorer Firefox and Internet on my laptop, a friend told me that they will be in conflict with each other. the question is what I would do abouth this.
Your friend has any idea. Both work very well.
-
Microsoft 3000 wireless keyboards; they will interact with each other
I have 2 PC and I would like to replace the wired keyboards for 2 sets of Microsoft 3000 keyboard, will they interact with each other and can I change Ch / Freq of the units
Hi Baz,
Each keyboard has different frequency and will not interact with each other.
-
Hi all
I have 5 wireless devices must connect to the router.
I want to divide it into 2 groups:
That is to say, 1, device A, B, C, group 2, device D, E.
I would like two groups cannot communicate with each other.
I've heard, it can be done by VLAN, is e2500 can adapt to what I need?
What about EA3500 and EA4500?
I use G wireless, is what it means that ea4500 is out of choice even if it supports VLAN?
Thank you all!
Evil
Thanks for the clarification for the OP
FWIW
is this an alternative to routers that do not support of VLAN, to do what you want
-
Two Xbox 360 Wireless controllers Microsoft will interfere with each other?
* Original title: Microsoft Xbox 360 for Windows wireless controllers... Two will interfere with each other?
Controller: Microsoft Xbox 360 Wireless Controller for Windows (JR9-00011)
Operating systems: Windows 7
I have two PCs located in the same room. Is it possible to set up a wireless for each of them so that they do not interfere with each other?
Hello
I would like the links and see if it helps.
How to set up your Xbox 360 to your Windows PC controller
Set up your Xbox 360 for Windows gamepad
If you have other questions, please post your request in the Xbox forums for assistance on this issue.
Hope this information helps.
-
AnyConnect Clients cannot communicate with each other
I have a problem that I've been pulling my hair out... my teleworkers connect to our network of Corp. via a connection AnyConnect VPN (version 3.1) to a Cisco ASA5520. I have not split tunneling enabled for this profile, so that all traffic should pass through the tunnel and all guests are in the same subnet L3... as far as their IP VPN address goes. The problem is the teleworker PCs cannot communicate with each other (pings/RDP/etc.). When I look at the newspaper I see traffic from one to another, have denied anything, but they do not communicate. My Network Corp., I can communicate with the two PCs Anyconnect very well. When I go to monitoring. ASDM itineraries I see each host that is connected to the ASA via Anyconnect, and the gateway for each is the default gateway of the SAA.
Am I missing some setting in the VPN profile that prevents the access between these hosts? I think that something come in the newspaper...
Have you enabled crossed and also a free NAT between AnyConnect users?
permit same-security-traffic intra-interface
network of the AnyConnect_users object
subnet
public static AnyConnect_users AnyConnect_users destination NAT (outside, outside) static source AnyConnect_users AnyConnect_users
If this does not resolve your problem, please post a sanitized complete configuration of your ASA.
-
ASA - Tunnel all traffic, allow rays to communicate with each other
Well, I hope someone can help me with this headache! Switching to employ a PIX and VPN 3005 concentrator Office at home in an ASA5510 for firewall and IPSEC tunnels. It is pretty much a
- VPN on a stick, multiple rays.
- All traffic sent by tunnel
- Internet access through main office (using the web filter) of
- VOIP to VOIP between rays
- All departments are using the clients VPN 3005 HW or ASA 5505 s
HEADQUARTERS: 10.0.0.0/24
Speaks 1: 192.168.11.0 / 24
Speaks 2: 192.168.12.0 / 24
Speaks 3: 192.168.13.0 / 24
-continues to 192.168.31.0 / 24
Spoke with the current configuration, 1 can communicate with all the resources in the home, office and Internet integrated properly checked by a tracert. However, the rays cannot communicate with each other. This is required for VOIP traffic, when all TALK TALK calls are made (sites).
Logging information when talk of talks initiated icmp:
- No group of translation found for icmp src, dst outside: 192.168.31.1 inside: 192.168.11.1 (type 8, code 0)
If I remove the nat (outside) 1 192.168.0.0 255.255.00 - rays will begin to respond to each other, but then the rays cannot tunnel through the Home Office Internet traffic. My brain is so scrambled after the cramming of VPN configurations for these days, so I hope someone has an idea. I've always used concentrators 3005, so it's a little different! In the search for documentation for this configuration, I was surprised that this isn't a most common topology. It seems that this article would (http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805734ae.shtml), but there is no rays! In any case, I'm sure this has something to do with NAT rules and perhaps who need access for traffic list speaks of talking.
=============================================
ASA Version 8.2 (1)
!
hostname asa5510interface Ethernet0/0
Speed 100
full duplex
nameif outside
security-level 0
IP address 97.65.x.x 255.255.255.224interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 10.0.0.40 255.255.0.0permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
the DM_INLINE_NETWORK_1 object-group network
object-network 10.0.0.0 255.255.0.0object-network 192.168.0.0 255.255.0.0
access-list sheep extended ip 10.0.0.0 allow 255.255.0.0 192.168.0.0 255.255.0.0
Allow Access-list extended wccp servers ip host 10.0.0.83 a
Redirect traffic extended access-list deny ip any object-group DM_INLINE_NETWORK_1
Redirect traffic scope permitted any one ip access-list
Global 1 interface (outside)
NAT (outside) 1 192.168.0.0 255.255.0.0
NAT (inside) 0 access-list sheep
NAT (inside) 1 10.0.0.0 255.255.0.0Route outside 0.0.0.0 0.0.0.0 97.65.x.x 1
Route inside 192.168.0.0 255.255.255.0 10.0.0.1 1
Route inside 192.168.2.0 255.255.255.0 10.0.0.1 1
Route inside 192.168.3.0 255.255.255.0 10.0.0.1 1Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto ipsec df - bit clear-df outdoorsCrypto-map dynamic dynmap 1 transform-set RIGHT
map mymap 65535-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400crypto ISAKMP ipsec-over-tcp port 10000
management-access inside
a basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interceptionWCCP web cache redirect-list Redirect-traffic group-list password xxxxxxx wccp-servers
WCCP 90 redirect-list traffic Redirect wccp servers group-list password xxxxxxxWebVPN
internal MJHIvpn group strategy
attributes of Group Policy MJHIvpn
value of server WINS 10.0.10.1 10.0.10.2
value of 10.0.10.1 DNS server 10.0.10.2
allow password-storage
Split-tunnel-policy tunnelall
mjhi.local value by default-field
allow to NEMusername field-3002 SjfS1Pq2xZGxHicx encrypted password
attributes of username field-3002
VPN-access-hour no
VPN - 250 simultaneous connections
VPN-idle-timeout no
VPN-session-timeout no
Protocol-tunnel-VPN IPSec
allow password-storage
type of remote access serviceremote access to field tunnel-group type
General-field tunnel-group attributes
Group Policy - by default-MJHIvpnIPSec-attributes of tunnel-group field
pre-shared-key *.class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the they
inspect the icmp
!
global service-policy global_policyHello Ala,
In Act got to be with the Nat configuration.
So basically you want to tunnel the traffic on the rays to communicate with each other.
OK, it would be with a nat 0 with the access list with the corresponding traffic outside.
Also on the crypto ACL for each site configuration, you must add an entry for the traffic of other offices.
I hope that I have explained myself.
Have a good
Julio
Note all useful posts!
-
Hello. I would make both objects or images imported into Muse react with each other. When I say react, think of a ball bouncing off a wall or a pool ball hitting a bunch of other billiard balls. I searched for a widget that might allow cela and couldn't find one. Is this something that can do Muse, or should I look for something else... edge or the interaction of coding? Thank you.
You can do using the edge, then publish it in the "animated dashboard deployment package", ".oam".
-
How to change the color of each page number in InDesign CC?
I'm working on a book that has pages with black background and some with white background... I need to know how to change the color of each page number, so that they will be visible on the black background.
I tried clicking on the page number, cmd + shift click... nothing seems to work. I have all the page numbers on a separate layer, because they were hidden behind the images that I place on each page... I don't know if it's important.
Any suggestion would be appreciated.
My best advice is to make a second set of master pages with white numbers and apply them as needed.
Maybe you are looking for
-
8610 e: 8610 send email HP's need to change password but cannot find where do
I used the scan to email for a long time. My gmail account has recently had a change of password and I need to change it in my printer. There was once a scan to E-mail wiizard but since installing windows 10 he's not here. Does anyone know how to do
-
Can put photos into individual folders?
I like to organize my photos and put them in different folders, e.g. friends, family, pets... How can I do this? I thought 'my pictures' and 'images '. I tried to download images & their files from my old phone to my computer for the backflip and non
-
Identify several Classes in particles classifier
Hey guys! So, I do this VI that differentiates a nut and a washer and a screw. I use the classification of particles for the same. The problem lies here. I want the program to respond only to a particular type of object, even when there are several o
-
Windows media player crashes when you start cd play
When I insert a CD in windows media player, screen freezes when cd starts playing and the sound is chopy.
-
Hi I have a "could not load user profile" can anyone helpme
the computer gets freze and whent I try restarting appers this message "user brightness can not beloaded"