How to reset a device VDR

Similar Questions

• NB100 no usb not power - how to reset

  The NB 100 has 2 usb ports on the right side. I tried plugging in an external cd drive and got a box with red indicator of the background task bar indicating something on the device of drawing too much power and that the supply would be stopped.
  Since then the usb ports 'appear' dead. Nothing I plug is recognized by the NB100.

  It is said in the user's manual if it is found an overload of the power to the usb ports can be stopped. However, it does not say how to reset ports IE power to 'em.

  The card reader and the usb port on the left front work yet.

  I tried the update of the BIOS to the latest 2.10, affecting all the parameters of the default bios with F2 at startup and even bought "Device Driver" to make sure that all drivers are up-to-date.

  Can anyone help? I don't know there is a simple answer but just don't see it.

  Ideally, I would like to avoid having to reinstall XP because I do not have the disk and the hard disk does not appear to have a XP partition.

  Help!

  Hello

  In your case, I recommend to remove the /hub of /controller of the USB port on the Device Manager.
  Simply go to the Device Manager, expand the area of USB controller and remove all the devices that are available in this area.

  After restarting again, the system (Win XP in your case) should recognize the USB ports and the driver must be installed again.
  Then restart once again connect a USB device and check if it can help

  Just for info: USB 2.0 ports provide 500mA so in some cases the external USB device would not detected when this device would need more than the usual 500mA. In this case this device must be connected to two USB ports using a USB Y cable or use an external power supply, as do some USB hubs.

• How to reset a disabled iPhone 4S without iTunes

  How to reset a disabled iPhone 4S without iTunes

  Restore your device from an iCloud or iTunes backup - https://support.apple.com/HT204184

• I'm unable to use the email as my iMap password is incorrect - how to reset?

  I'm unable to use the email as my iMap password is incorrect - how to reset?

  You need to reset your password to email through the email provider. It is not a specific device parameter. Your password is related to your e-mail account. Seek help from your email for this provider.

• What happens if the previous owner of ipad forgotten their password and they are not original owner so that they do not have. their system crashed and they reset their device. so they just lost $ 300? It is NOT stolen or lost.

  What happens if the previous owner of ipad forgotten their password and they are not original owner so that they do not have. their system crashed and they reset their device. so they just lost $ 300? It is NOT stolen or lost.

  It requires the Apple ID and password from the previous owner. If you don't have it and can't get it, then the device is useless to you. Return it for a refund if you can.

  Find my iPhone Activation Lock

  Check in the future first before you buy second hand: How to check for Activation lock before buying a second hand iPhone.

  Find my iPhone Activation Lock

  Find my iPhone Activation Lock - remove a device from the account of the previous owner

• I have a MN700 router for my wireless. How to reset the password?

  I have a MN700 router for my wireless. How to reset the password?

  I contacted Microsoft via the phone, but because they no longer carry this point they couldn't help me.

  Hello

  1. what operating system is installed on your computer?
  2 did you change your computer, after which the issue started?

  Here is the manual for the device...

  http://download.Microsoft.com/download/b/6/9/b69c956c-85d9-4641-aa6f-1548391e0967/mn700_base_station_configuration_guide.PDF

  Reset the router and set it up as if it was the first time. Then, you can simply choose a new password and security settings.

• How to reset the date on a HP Officejet 6600 on Windows XP

  How to reset the time on a HP Officejet 6600 on Windows XP

  Hello

  Below are the steps to set the Date and time for your device:

  1. On the Control Panel, press the right arrow button and then press Setup.

• How to reset or find the network security key

  Hello!

  I tried to get my laptop connected to my new modem/Wi-Fi device and asked me to put a network security code, and without knowing what I was doing in fact I just typed something and changed my network security key. I just want to know how to reset so I can get the laptop to connect to my WiFi. What should I do?

  Hello George,

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  I also appreciate the fact that you want change or find the security key for your network.

  You may not reset the network security key.

  I suggest you to refer to this article and check if it helps.
  Reference:
  How to find your wireless network password
  https://www.Microsoft.com/surface/en-us/support/networking-and-connectivity/how-to-find-your-wireless-network-password

  Additional information:
  Set up a security key for a wireless network
  http://Windows.Microsoft.com/en-us/Windows/set-security-key-wireless-network#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HP support don't know how to reset regionalization, now what?

  I buy a powered OfficeJet 4620 in Germany in February 2013.

  NOWHERE in the documentation of the product he mentions the ink cartridges are regionalised (defeats the purpose of even making a 110-220v device! But I digress).

  I moved to Florida in June and yesterday my black ink starts to run out.

  The needs of the 'regionalisation' Reset printer that cannot be performed by HP support, as indicated by their own Web page:

  http://support.HP.com/us-en/document/c02558798

  Another description of him here:

  http://www.FixYa.com/support/t156381-change_region_code_ink_cartridges

  I call HP support and waste an hour and a half with a girl in the Philippines until finally, she tells me that I need a complete set of USA ink cartridges in order to perfom the procedure (which seems to be not true, you do not need to reset the printer, but rather, it seems, you need simply if you want to print anything after the reset was carried out) (, if for no other reason but to check that the reset was successful). She claims the HP support call me this morning at 23:00 they did not.

  I call HP "Support" at 1130 EST and go through the wickets with them again. This time the girl does not know what to do and is clearly completely ignorant about the fuzzy product less how to solve, and instead she's just following a script. Another wasted hour. After having been put on hold for the 4th or 5th time 15 minutes, I just hang up. (Realization later that it is a deliberate strategy).

  I give the floor again. Now I am taking the floor to a guy in India. He doesn't know what he's done and tries to guide me in the menu of support on the printer itself, but his scenario does not match the list of printer options. Back at intervals of 15 minutes waiting interrupted by him by saying: "one minute Please Sir while I check some information." Another hour lost, until I'm finally starting to realize that none of these people know what to do.

  I always call back and get another guy who leads me on the Help menu (press the button back 4 times to access this menu). I have go to the reports Menu and select the 'mech button tape printing' option, which prints a page 2 print "printer hardware. He asks me to "give him the numbers on the document, but the document has all kinds of numbers on that of serial numbers for the product numbers to other numbers with labels that are simply abbreviations. I ask him what are the numbers he needs of the two pages full of numbers and return pending I'm going for 20 minutes. He comes back and says "the long number, there should be a long number. Well the long number on the document is the serial number that I have already given during questioning initial information he did and if I ask him if he needs it again. Return pending, I go for another 20 minutes. Now the 15-20 minute hold cycle resumes, with him "check something" and he "will be immediately. Eventually he clicks just to see if I'm still on the line and immediately puts me on hold without saying anything. I put my phone on speaker, and I him wait outside, having already lost an entire morning and half my afternoon.

  However, it was the best part... HE BEGINS to PRETEND LIKE THERE IS of HAVING of PROBLEMS of MICROPHONE AND CANNOT HEAR ME (yes I know, must it do with hear me his microphone, I had the same thought). It is obvious that he has just taken his helmet on his head or moved away the microphone to his mouth and pretended that he does not hear me and he'll call me back and ask for my number to. I ask him how he's going to hear me tell him my number (which incidentally, happened already at the beginning of the conversation) and he continues his ruse. So I hang up. It is obvious that he doesn't know what to do and won't there else to help me.

  Now I remember tonight about 930 hours EST, and I get the Philippines again. I'm hollow any phase of questioning with the girl and explain to him that I need the regionalization reset performed, and all that I need is to know what are the numbers of my printer to give HP support so that they can give me the code that I have to reset this device. I have him politely say I understand if she knows not what to do or understand this procedure and that I won't be angry with him, if she is simply honest and said so, but I want her to tell me if there is someone there where she works who will certainly know how to reset a supervisor or a real technical adviser, everyone. She is friendly and honest and said it's time frst that she has heard of this, and she wondered what to do. Return pending for 5 or 10 minutes. She claims she's looking for in its 'resources' for the way to do it. Nothing. I ask him to please stop and get her supervisor, she claims she is to check with her supervisor and that they "check the resources" for the procedure reset regionalization. Stupidly, I think we are making progress.

  After 20 minutes of his constantly telling me that it checks its resources, even after I repeat what the procedure involved and that all she needs to do is find the procedure and tell me what are the numbers he will ask to the device itself to provide the reset code, I tell him to stop what she is doing and to his supervisor on the phone. She stalls. She says she's sorry, but they have never heard of this procedure before and that it will set me a reminder for tomorrow. YES RIGHT. I ask her WHO's going to call me tomorrow? She responds that it will be them, and they will have the answer. I tell him that I already heard of them before and I don't have another day to be wasted. I tell him to put his supervisor on the phone and I want the name of the one who is responsible for his office. She tries to ignore me and continues to ask for my phone number (which it already has). I press him for the name of who is in charge, and finally, she says "Peter" is the prime contractor. I tell him to "Peter" on the phone. 10 minutes waiting and later a guy takes over the line, says it is "Peter" and asks how I'm doing. I politely say I feel good and I ask him his surname. He asked why I need her family name. I repeat my question, "what is your last name Peter?"... his response? "Hello, Mr President? I can't hear you, can you hear me? "He starts playing with the microphone and put me on hold. Whenever he picks up and asks if I'm here I immediately have him ask his last name, to which he returned the ruse that he can't hear me. I stay on the line. At this point, it seems that HP should have some sort of policy where their 'Support' staff is not allowed to hang up the phone first, maybe, it is even followed as half-assed programs method internal 'Quality assurance', and these people not know and so they leave you on hold forever and wait until you hang up. So I expect Peter out for about 10 minutes, I'm not waiting because there is no music, the microphone is cut simply. I tell him that I know he's there and you can hear me, and I know that he can't hang up first, and then he hangs up quickly.

  SO, my question...

  NOW WHAT?

  How to get anything out of hand at HP when their 'support' overseas does not know what to do?

  I live in Miami and there there a headquarters in Latin America for HP. I think to walk right into the lobby and find a person in authority thatcan put me in contact with a person with an ounce of skill in the business (assuming they have one), but in all honesty, I want just the printer region d * reset if I can use these ink cartridges, I already bought and opened.

  Suggestions?

  UPDATE *.

  Someone at HP, to the United States, got wind of my post here and tried to contact me by phone and sent me a letter. On the letter, he gave a phone number and the extension to the person trying to communicate with me, apparently "in charge of my case."

  I tried to contact this person after his return from a trip outside the United States, and instead, I was connected to a woman named Ashley. Bottom line: Ashley has been very useful, direct, courteous without coming off as gushy (aka professional) and addressed this issue permanently. She had a new American market 4620 spent the NIGHT at my house in Miami.

  While I thought that the problem would be solved, this was beyond what I would have ever expected. I asked why not just perform the reset, than to go through the obvious expense of a brand new unit more for overnight shipping? She replied that she wanted to be sure that I had no future problems to the ink to 100% and that it is too possible to subsequent topics with units that have the regionalization reset the procedure being executed.

  When I asked why bother manufacturing, a dual voltage unit if the regionalization of the cartridges prevent the it in other markets without performing a procedure that HP even know is problematic? She said that HP made away with cartridges regionalized in the futre for this same reason. This information, combined with the fact that Ashley has gone far beyond what I ever would have asked that the resolution has come a long way to get HP back on my list of good... HOWEVER, HP must address than their call centers overseas. Support should be like Ashley, competent, good product knowledge and empowered to solve problems. I don't personally like if it's a Filipino or Indian, I understand business is harder to do in the United States, but if you can't get these people to meet the minimum standards, or minimum standards must be low, then they do much more harm than good and you might as well have no technical support.

  Again, the support in the USA should be the norm. The customer should not have to raise hell and let the horror stories on the internet public forums in order to get in touch with the weeks of good people more later.

• How to reset aspire keyboard? Windows 7 aspire 5253

  HOW TO RESET HIM ASPIRE 5253 KEYBOARD? FAILURE OF THE RIGHT KEYPAD NUMRIC.  THE DEL BUTTON DOESN'T WORK SOMETIMES DOES NOT.

  Hello

  If you spilled anything on the keyboard?  Bring it in a warm room and let it dry.

  Start > all programs > Accessories > accessibility

  Select the on screen keyboard

  Use this option if needed

  If make sure that keys filters is not checked

  Click

  Start > right click on my computer

  Select manage

  Click on Device Manager

  Click + next to keyboard

  Right-click on the driver and then select uninstall

  Restart the computer

  Go to the manufacturer's website and search for updated driver

  Press Fn + NumLock

  Keyboard works now?

  If not works, you are able to remove the keyboard and try another to determine the keyboard is defective?  Can you reconnect the ribbon cable that holds up?

  If under warranty, contact the Acer Support for repair

• BlackBerry smartphone how to remove my Torch 9800 IT strategy, or how to reset the unit to the factory settings

  
  

  See the article in the Knowledge Base RIM here for more information about how to remove an it strategy. See method 3 in the link:

  KB14202 How to remove a policy from IT to a BlackBerry smartphone

  Read this article from RIM's Knowledge Base to reset your device to factory settings.
  KB18998 How to reset a factory default BlackBerry smartphone

• My windows administrator password has been changed. How to reset the password?

  My windows administrator password has been changed. How to reset the password?

  Here you go:
  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before someone changed your password.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.

• Password reset/bypass device

  OK, here's my problem... When I turn on the phone, it is locked and wants the password for the device.  Is there anyway to reset or bypass the password?  I bought this phone from a friend who went to jail and now I can't ask him how to open it.  I know that many of you here can help Traffic.

  Some info on the phone

  Motorola

  FCC ID: ihd756fq1 EA3 ATS

  IC: 109 O - FQ1

  DEC: 02707803735 model: rev Q H/W, a

  Hex: 1 B 771357 HEJ 9 66 U #1vf3

  Is there anyway to reset this device password?

  Switch the phone off. Then hold down the silver button and then press and hold the red button. Hold down until you see "Master Reset" or not. Press Yes and returns to manually reset the phone to restore access.

  Mark

  Support Forums Manager

• How to reset the driver Nvidia to the default setting? (HP dv-1275dx)

  I have display problems after the last version of Windows up to date with my screen. Now he blocks every two minutes. How to reset the driver Nvidia to the default setting? (HP dv-1275dx)

  Thank you.

  the Device Manager > display adapter > choose card > driver rollback

• How to reset the number of Badge Application AS3

  Hello

  I sent a notification of transmission of Apple successfully using a native extension for adobe air by anders-tbl. The notification simply affects the badge number 1 and has a little message.

  What confuses me, is how to reset this count badge once that a user opens my request again or opens the application by clicking the notification? Badge County remains at 1, even if I delete the app and reinstall, it's still there! ??

  I know that I can reset the counter of the badge by sending a notification with badge = 0, but I can't do so by sending a blank APN with badge set to 0 you get only the device of chips on the first application load dynamically? Surely, you set this via a kind of AS3 function? I can't seem to find any help search google at all.

  If anyone knows or can push me in the right direction on how you are supposed to do this it would be great.

  See you soon,.

  Push notifications don't are currently not supported in the AIR. I mean there is no public API Actionscript to activate the Push Notifications in the AIR on any platform. There therefore no ActionScript API to reset the batch either number(for iOS). Since you are using native extensions, you will only have to rely on them to provide you with the number.