How to reset the office pictures back to default

Similar Questions

• How to reset the windows media player 12 default settings

  Original title: how to reset the windows media player 12 default settings

  My Windows media Player 12 has stopped play all the sounds (Win 7 HP 64 bit) - I can play sounds with Windows media Center, DIVX, etc. of Winamp, but not with Win Media Player. I would like to reset Windows Media Player 12 to its default state, either by doing a reset or reinstall. Can someone tell me how to do what you please?

  Do these two steps [they are the closest thing possible to uninstall then reinstall WMP & will actually provide a new installation of WMP]

  1 unload WMP - Panel, programs and features, [left] turn on or off has Windows, multimedia features, clear box Windows Media Player, Yes, OK, restart the PC.

  2 reload WMP - Panel, programs and features, [left] turn Windows features on or off, multimedia features, set the Windows Media Player box, Yes, OK, restart the PC.

• How to reset the airport extreme to factory default

  My Airport & time capsule are not connected to the modem, saying no dns server is available, however the modem works when connected to the computer. (Macbook) After hours of troubleshooting, I would just restore default settings and see if I can get it going again. Can anyone provide info on restoring the default settings?

  Thank you!

  • Turning off AirPort Extreme for a minute or two
  • In the reset button on the back of the AirPort Extreme first... and keep taking them for 7 to 8 seconds... while simultaneously you reconnect the power on the AirPort Extreme.  (This step is a bit complicated for most users, because it takes almost 3 hands to do it properly)
  • Release the reset button to zero after the period of detention and allow a minute for the AirPort Extreme back on the way to a slow, flashing amber light status

  AirPort Extreme is now back to the State it was when you took it first out of the box.

• How to reset the display of files by default when I opened the Windows Photo Gallery

  When I opened the Gallery of photos, I had a view similar to the view of the Explorer window with all my files that I've organized by date and name.

  I must have hit a sequence of keys, and now I can not the same rear view.  The closest I can get is a list of the directoty root, but it is not useful.

  I'm looking for a list of the names of folders.

  See if that helps,

  

  Also use this and if the Table of contents is checked uncheck it.

  

• How to remove the Microsoft Office Picture Manager by default to opening my PDF files?

  How to remove Microsoft Office Picture Manager as the default program to open my PDF files?  I downloaded Adobe do X 1?

  You must change the file association for. PDF; How do depends on your operating system and version.

• C5150 - how to reset the printer to clear the network password?

  I bought a C5150 which had been used as a screen.  I'm unable to access the built-in web server network setting.  Reset the printer to the factory setting, of the façade has no effect.  There are no instructions to all documentation on how to reset the printer.  Help!

  I guess that you did not read my * last * post here, which has been designed for you. in any case...
  
  PhotoSmart C5100
  -Press and hold the "Setup" & "left arrow" keys Release the two buttons. Display should say "enter special key Combo".
  -Press "OK".
  Display should say "Support" and display the FW XXXXX rev (you are now on the Help menu)
  
  TO MAKE RESET "Half full" in the HELP MENU:
  
  -Use the > to scroll to 'Resets the Menu' and press 'OK '.
  -Put "Full Semi" highlight Reset and press 'OK '.
  -Unit will shut off by itself in 3-5 seconds
  -Power and then turn it back on by button / stop
  -Leave the print alignment page - do NOT cancel
  -Allow to go through maintenance and Photosmart screen (normal)

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• (1) how to reset the task in view/default Access Manager? __2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

  When I open the window (in Windows Vista) Task Manager, it shows that the "Applications" tab  I can access is more 'Processes', tab 'Performance' and 'Network'... this just started recently.
  (1) how to reset the task in view/default Access Manager?
  (2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

  Double-click inside the border/edge to bring it back to the default view for Task Manager.

  Malware scan:

  Download, install, upgrade and scan with Malwarebytes to check / remove Malware/spyware.

  If necessary, do all of the above work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

   

   

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon. Mick Murphy - Microsoft partner

• How to reset the button incase they click New to create the same effect?

  OK guys,

  So im at a stop of triggers on the timeline, EX: sym.stop (1000);

  Then I'm animating a click on an element div/EX function:

  SYM.$("Rectangle2Copy23"). Animate({left:'3px',height:'77'});)

  How to reset the button incase they click New to create the same effect?

  Instead the object does nothing because it is already in position.

  I would go back to its original position and recreate the same effect.

  Problem is that the timeline stops... even if I go to another point in the timeline panel

  the last position assigned by the rest effect, I want to reset it even on the same point on the timeline...

  Thank you

  First of all, you need to upgrade your board animate to 2014.1.1 to open the membership re-shared, and

  then check this out:

  Dropbox - Archive_upgraded.rar

  Note: I added jquery explicitly for use. animate(), like the last Animate edge has no dependency on jQuery.

  HTH,

  Vivekuma

• How to reset the first 12 items general preferences?

  After using the first 10 items for some time, I now have the first 12 items on my PC, I firstly the duration for still images of 5 seconds, not the default 6.  I made a mistake when you do by changing the duration of transitional Default video by mistake, realized my error and reset that 30 images (is that correct for PAL)?  I then changed the duration of stills from 150 to 125, even if it's to show 150 when I go to General preferences.  When I import a still image in, it says 5,00 s, image active project, but when added to the project all the pictures say duration 5.01 seconds.  I have no idea what I did wrong and why 5.01 seconds seems to be the term.

  Please could someone tell me how to reset the preferences General return to the default settings, if that is impossible, that I would have all the parameters of general preference to PAL?

  Thank you very much in advance for your help.

  DSgal

  Same thing in first items 10 and 12.

  If you have a PAL project, when you open Edit Menu/preferences/general, you will see the default settings

  The video Transition default duration = 30 images

  In the PAL 25 fps project, these 30 images are equivalent to 1.20 seconds.

  Audio Transition default duration = 1.00 seconds

  In the project 25 fps PAL, second 1.00 equals 25 frames

  (samples vs audio frames is another story for another time)

  Always default Image = 150 executives

  In the PAL 25 fps project, these 150 frames are equivalent to 6.00 seconds.

  The above default values will be applied to all of the pictures that are imported AFTER that all bets are off.

  If you want to change the still Image default duration for the project of 6.00 to 5.00 seconds, BEFORE the import always replace you

  150 images to 125 frames. This gives 5.00, not 5.01 seconds.

  Examples

  6,00 second duration = 150 executives

  Duration 5.00 seconds = 125 images

  Duration 4.00 seconds = 100 images

  3.00 second duration = 75 images

  Duration 2.00 seconds = 50 images

  length of second 1.00 = 25 frames

  Yet, these settings are made BEFORE and not after import again.

  If you are in the project with your still images already on the Timeline with the still Image default duration of 150 executives (6.00 seconds) as defined in the preferences and you decide to change the duration of the still of 6.00 seconds to 5.00 seconds, then you do a right click of the alembic, select Time Stretch, and set the Time Stretch dialog to 5.00 seconds.

  Example in the Time Stretch dialog... from 00; 00; 06; 00 00; 00; 05; 00 (hours, minutes, seconds; images).

  This can be done for a timeline yet, or more than one timeline yet at the same time.

  Please consult the bulletin and review, and then let us know if you are OK with the details.

  Thank you.

  RTA

• How to reset the timer to zero?

  Good day people,

  How to reset the timer to zero?

  I have a button in the timeline relative to the code below, and when I click on it I want to the behavior of the time back to 1 or 0.

  Click the timer to 1 or 0.

  -----------------------------------

  contents_mc - timer_txt

  -----------------------------------

  _root.elapseTime = 0;

  intervalId = setInterval (this, "countDown", 1000);

  function countDown() {}

  {if (_root.timerOn)}

  ++ _root.elapseTime;

  " _root.elapseTime = _time +" "seconds";

  if(_root.elapseTime == 10) {}

  _parent.gotoAndStop ("GameOutOfTime");

  clearInterval (intervalId);

  }

  }

  }

  Stop();

  Any response will be appreciated,

  Thank you

  use:

  function resetF (): Void {}

  clearInterval (intervalID);

  intervalId = setInterval (countDown, 1000);

  }

• How to reset the forgotten administrator password

  How to reset the forgotten administrator password

  You forgot your password

  Lion or later version

  Reset a password in Mac OS X 10.7 Lion

  OS X Lion mountain - reset a login password,

  OS X Mavericks-solve password problems,.

  OS X Lion-Apple ID can be used to reset your password for the user account.

  For Snow Leopard and earlier with installer DVD

  Mac OS X 10.6 - If you forgot your administrator password.

  OS X - change or reset a password for account (Snow Leopard or earlier version).

  For Snow Leopard and previous without installer DVD

  How to reset your Mac OS X password without an installation disk. MacYourself

  Reset password for OS X without an OS X CD - Tech News and Analysis

  How to create a new account administrator - Mac Hack

• How to reset the lost password admin

  How to reset the password for the admin on my mac?

  Restart your mac and hold ⌘R immediately. Keep until the Apple Logo appears. This may take some time for your mac start. Once this is the case, select Terminal in utilities > Terminal to the Menu bar above. Once the terminal appears, type

  ResetPassword

  A password reset Wizard will appear. Select the appropriate account, and enter the new password. Then tap Save. Then, click the apple logo in the corner, and tap on choose Startup disk. Click on Macintosh HD and press ENTER.

  You should now be able to use your new admin password.

  Good luck.
  

• Previously, during display of the image (photo) in the tab, it displays the resolution of the image, how to recover the photos (pictures) display resolution?

  Previously, during display of the image (photo) in the tab, it displays the resolution of the image, how to recover the photos (pictures) display resolution?

  You bring up the title bar via the "Title bar" button at the bottom left in the palette to customize window

  • Firefox menu button > customize > title bar
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox

  

  See also:

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox

• Re: How to reset the password on the logon screen - Satellite A300?

  How to reset the password on the logon screen?

  I can not access the installation of the establishment or BIOS because I can't pass this screen. Enter something wrong 3 times turns off the computer. I do not have the current password and I don't know what kind of password is and why it s asking one as soon as I turn it on.

  How can I solve this problem?

  You can not fix it. You can only disable it, but to do this, correct password must be known to you.
  As many times before in this forum we have already discussed on this topic.

  Password is very important security feature and we cannot advise how to bypass or remove passwords on the public forum. In other words, each stolen notebook protected by password will be easy to start and access to the recorded data will be easy.

  What is your laptop? You may have purchased this used an and now it is blocked by password?