How to respond to the e-mail and does not return a mail received in my response?

Similar Questions

• After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.

  If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.

• Download Nikon D90 photos via a cable of Photos does not work. The picture freezes and does not matter. Any ideas?

  Download photos of Nikon D90 Photos OS El Capitan 10.11.16 cable does not work. The picture freezes and does not matter. Any ideas?

  Try with Capture of Image (in your applications folder)

  LN

• Network type changes 'Public' and does not return to work when the default gateway is detected

  Original title: Type of network not restored on ethernet cable reconnect.

  I have a Dell Precision R5500 running Windows 7 Professional Service Pack 1. It is connected to a network that is stored as a type of 'work '. When the ethernet cable is removed and replaced network type changes to 'Public' and does not return to work when the default gateway is detected. I also have a Toshiba Tecra M10 running Window 7 Professional Service Pack 1 that initially detects the network restored as 'Public', but 'Work' once again Exchange is a connection to the default gateway. Is there a setting somewhere in the strength of the network to double check its type periodically?

  Hello

  You have any other network assets wireless (specifically) running on the computer?

  Have another active network connection could also cause this.

  Allows us to follow the methods mentioned below and see if they help.

  Method 1: Run the network troubleshooter.

  When the network type gets changed to 'Public' after the cable is disconnected and reconnected. The troubleshooter should let you know if there are errors with the associated services.

  See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2: check if network discovery and file sharing options are enabled in the network and sharing Center.

  See the following steps:

  a. click on start toreduce this top, type network and sharing Center in the Start Search box, and then click network and sharing Center in the programs list.

  b. If network discovery is off, click the arrow to expand the section, click turn on network discoveryand then click apply.

  Reduce this includes this imIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. If file sharing is off, click the arrow to expand the section, click turn on file sharingand then click apply.

  Collapse this includes this ima

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  
  Method 3: Uninstall the network drivers and then install the last set of drivers on the manufacturer's Web site and check the issue.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network adapter, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I try to install the im creative cloud my iMac and the process hangs and does not end. What can I do to solve the problem?

  I try to install the creative cloud in my iMac and the process hangs and does not complete. I've used the creative cloud cleaning tool...

  What percentage he block?  About 42%, open activity monitor when it crashes and complete the process of helping adobe dangling.

  otherwise, troubleshooting installation using newspapers in Photoshop Elements

• I downloaded the latest version, but the form page tells me to download the latest version and does not display the form

  I downloaded the latest version, but the form page tells me to download the latest version and does not display the form!

  Ok. Chrome has stopped supporting the player plug-in (for now). You'll want to download the forms by placing the cursor on the link, right click and check-in at your computer. Alternatively, you can try another browser such as Internet Explorer.

• Screen turns black and does not return. One stop forced

  When I leave my computer for a while, the screen turns black and does not return when I press 'enter', or any other key.  I do a forced shutdown (turn off with the power button).  Can I get, and the "incorrect closing" message when I turn on computer. I think that it is a problem of Hibernate.  Any ideas?.
  MMM

  Original title: hibernation problem?

  What happens if you press Ctrl + SHIFT + ESC when you want to get out of hibernation?

  You use a wireless keyboard and mouse with a transponder. What happens if you press the button on the transponder?

• OfficeJet 6500 e709: prints w / scale on the left margin and does not print right side of the page

  Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none.

  HP trouble shoot said there is nothing wrong and test page prints fine.  Then back to the problem so try to print.

  HI @philg2,

  I see your thoughts produce a wide margin left and right of the page is cut off. What program are you printing from, and this occurs when you print from all programs or just a particular program?

  I see your post that this is not happening when you print a test page, so I think the problem is somehow related to the driver or program that you use. Let's start with the HP print and Scan Doctor is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• NB just by making the effort test and does not start backup

  HP dv7-4177 started having types, wouldn't restart. I tried to test that are inbeded and when I did the stress test he stops and does not restart. I hit the power button and nothing happens. I took the hours of battery sevealr and handed over in but I have nothing seems to help.

  Hello Nutn Spec.  I understand that your notebook is currently unable to boot.

  What kind of questions you know before performing the stress test?  This will help me identify the cause of the problem.

  Have you tried to do a hard reset?  It drains all the residual energy of the laptop and hardware reset forces.  If you haven't tried this before I would suggest trying the following.

  1. Make sure that the laptop is completely turned off.
  2. Remove the battery and AC power.
  3. Press and hold the power button for 15-20 seconds, three times.
  4. Replace the battery and AC power.
  5. Try to start Notepad.

  Let me know the result.  I will keep an eye out for your answer.  Have a great night!

• How can I fix the message "KBD EXE does not work"?

  I get this message when starting my computer.  The message keeps saying that windows will close the program and inform me if there is a solution.  This has been ongoing for months.  I don't know the source of the file or the goal.  It does not create major problems, but my computer was slow sometimes.  I wonder if this KBD EXE is somehow connected.

  You happen to have an HP computer? I ask this after searching a possible solution and multiplies the references KBD.exe is a HP program for their multimedia keyboard Manager. However, in my research I found no definitive solution, mainly suggestions for updated driver multimedia keyboard Manager.

  If you have an HP I suggest visiting their site of support below. You can post for a possible solution in their communities to support as well.

  Support HP & drivers
   http://WWW8.HP.com/us/en/support-drivers.html

  Kind regards

• TB 38.2.0 on Windows 8.0: since the update to 38.2.0, the program hangs and does not respond. I have to close TB and re-run the program - it works then.

  This has only started happening since Thunderbird has been updated to version 38.2.0.
  It seems to happen after restarting the computer (W8.0) of the State of "sleep".
  It seems that some mails are downloaded, then the program crashes and is then completely insensitive.
  Closing the program and once again start times seem to restore its functionality - the remaining emails are then downloaded and restored normal user interaction.

  Cymro78,

  Do you see an improvement when you use the 38.3.0 version?

• Why my ZTE open c Firefox OS Smartphone forget the wlan settings and does not sound the alarm?

  Sometimes it is even enough to go outside the trash to let my smartphone to forget the settings for the wireless LAN. When I come back, I have to re-enter my wlan router - not so short - code. Once the internet connection is running as it should.

  In addition, the alarm does not work, I can adjust alarms as I like, set the volume to maximum and also activate the vibrator but does nothing when the time arrived, even when the alarm appears on the screen all the time. Is my broken phone? Or is this a bug in the installation of Firefox OS?

  Where Firefox OS does not store these values for wlan connection and waking hours? Is there an internal database that may be corrupt?

  Hi Markus,.

  I understand that you are having problems with the Wi - Fi connection and the awakening of your phone ZTE C open.

  The problem of awakening seems to be similar to what has been reported by other users and is followed on bug 1052245.

  You have more information about wake-up issues that you are experiencing? This can be very useful to our engineering team is studying. Please be aware that the ZTE is the manufacturer of your device, and only they are able to release an update.

  The wifi problem can be linked to the bug 923324.

  Please reply to this message with the following information:

  • What is the OS version and Build ID found on the device information page? Please visit this link if you need help to find the ID for your phone.
  • Please provide the exact steps to reproduce the problem you are experiencing.
  • How many times you experience this problem?

  Please be sure to include as much detail as possible, including all Web sites who may have this issue and the error messages that you may receive, exactly as they appear. This will ensure that we have all the information needed to investigate this problem.

  -Ralph

• How can I change the permissions? His does not work.

  If this problem occurred when I tried to change the icons on my mac. The apps that I downloaded as pages, spotify, google chrome, etc have been changed without problems. (I used the method where get you information, then paste in). But when I went to change the icons of the apps that came with my computer such as safari, messages, photos, etc., that it did not work. There was no option to paste into the file menu and when I did command + v he comes to make a noise. So I googled how to change safari icon and it says that I have to change permisions. That's where the problem came. I pressed get info on safari and went down to the right, then I clicked on the lock and entered my password and the unlocked locking. But then when I went to the control panel and selected "reading and writing" in all he did not. He three get out a message that "the operation cannot be completed because you do not have the necessary permissions. Things to note are that in the permissions Panel my name and (I) was not under the name column. I am the sole owner of this mac and I don't know whats going on. Any help would be appreciated. Thank you!

  I think you're probably be lived this because of SIP (Protection of the integrity of the system). This was introduced in El Capitan (10.11).

• MS Office does not accept the product key and does not leave my type anything on Word documents

  I have windows 2007 edition vista Home premium and I neglected to enter my product key every time I opened a word document. I discovered that after 25 hours of opening ms Office it will not let type you anything on the document. I entered the 25-digit product key, that she had asked because I found on the label on the back of my lap top and every time I entered the code, he said that it was not valid. I double checked to make sure that I typed the numbers in the right order several times and it still does not accept it! I'm in the product key? I also tried the product ID and that no longer works. Help, please! Thank you!

  • Home Premium Windows Vista 2007
  • MS Word does not accept the product key
  • When you open MS Word, impossible to type anything

  You enter the incorrect product key. The product key on the back of your laptop is for the Vista operating system, no office. The office, which is preinstalled on your computer has a trial version. You can buy Office in order to continue using it. Then, you will get the Office product key.

  FAQ on MS Office trial versions - http://buy20.trymicrosoftoffice.com/buyus/faq.aspx?culture=en-US
  How to determine if you have an evaluation of a program or a suite edition Office 2007 installed - http://support.microsoft.com/kb/927920/en-us
  How to convert a trial version of a program or suite Office 2007 to a full retail perpetual license version - http://support.microsoft.com/kb/927756/en-us
  MS - MVP - Elephant Boy computers - don't panic!

• Win 10 update placed on the updates page, and does not update us '.

  We have a HP while a win 7 64-bit home premium.  We do not want to win 10 and hid all the updates that relate to what we know.  Now, to win 10 placed itself on the update page and wants to be installed.  It will not install to us of new updates of win 7.  What can we do?  Don't really like how microsoft has tried to impose it on everyone.  Please give us an answer.  Thanks Mammy37

  I had the same problem and used http://blog.ultimateoutsider.com/2015/08/using-gwx-stopper-to-permanently-remove.html

  I tried to hide the upgrade, but it came back in return. Finally forced to use the above with 'success' on the computers that I don't want to upgrade to Windows 10.