My mac screen go black with spots open when google map

Similar Questions

• After that start monitor/screen becomes black with visible vertical lines

  After that start monitor/screen becomes black with visible vertical lines. Move the mouse shows an activity going on behind the disorder. My son says video card?

  Hi Melissa,

  ·         Since when are you facing this problem?

  ·         Have you checked the issue by connecting a different monitor?

  Step 1: It seems to be a hardware issue to me. Check if the cables are well connected.

  Step 2: Connect another monitor to the computer and see if the problem persists.

• Screen turns black and shuts off when wakes up Portege Z830 - 11M

  Hi all

  Anyone know what could be the reason for the screen goes black and turns off when the laptop wakes up?
  The laptop is Toshiba Portege Z830 - 11 M W7HP, purchased in September.

  The problem started shortly after I bought the laptop, but gradually began with a period of 1-2 seconds black screen whenever I tried to wake the portable computer of fashion 'sleep'. He didn't look like a regular part "blackout" of the wake-up process so I just tried to ignore it, but it started to happen more often recently. It got really worse after two months of use and the black screen two or three times until I'm at the login screen. The error was also difficult to re-create because it was random. Sometimes, the screen went black once sometimes twice or just blinked for a fraction of a second.

  Yesterday, I worked during the day and at night it turned really bad. The screen went black several times, whenever I went back to work after a short break.
  I changed the laptop off when I'm done, but when I turned back on it in the morning, the screen was just black. I tried to use the touchpad, but it is only the screen on the gray.

  Can anyone suggest what to do?

  So finally that cannot start the laptop is Hmm normal?
  It would be interesting to know if this help:
  -Battery adapter and ac removal
  -Press and hold power button do this for 30 sec
  -Then reconnect both sides.
  Turn on the laptop?

  If this is not good enough, you're in trouble I guess its hardware related issue and in this case you must service help

• Laptop screen stays black with the mouse cursor only after that comes the HP and Windows logo

  Hi all

  No, my laptop model is HP Pavilion dv6 1337tx. My OS is Windows 7 Home Premium 32 bit. So, today, I shut my laptop down by force by pressing the power button because it did not at this time. Then the next time I turned it the wrong problem started. Whenever I'm on the HP logo sometimes and then the Windows logo comes also. But then the screen stays black and the mouse cursor appears. So, what can be the cause of this problem? I also tried to open with 'safe mode' and 'safe mode with command prompt', but they did not help either.

  Note - I tried the method of discharge after taking off the battery and holding down the power button. He could not help. All LEDS are working properly. I have no extra monitor, so I can't check the display elsewhere. Also, I ran the memory test which shows that everything is fine. Please suggest what I can do now as I can not enter the laptop now. What can be the reason?

  Black screen with blinking cursor:

• Updated to firefox9 and now when I use extension of tree style tab the screen goes black, with the exception of the "window of the tab" and the part of the screen behind him

  Update firefox9. Using tree style tab extension. Everything works fine, except that my screen goes black when in 'tab window', with the exception of the window of the tab and the part of the screen behind him. Once out of the tab section everything comes back fine, but it is rather annoying. Checked homepage for the extension and have the updated version, firefox add-on page - it also says that it is compatible. Any ideas on that?

   Am realizing pages will stay on as long as I don't move the mouse,but as soon as I do move it,black goes the screen.
  

  Ok. A installed version 1.4? Manufacturers homepage. This is apparently what caused problems. Get rid of this and installed version 1.3? Since firefox add on the pages. Problems solved...

• laptop HP 2000: screen turns black with cursor indicating after the password is entered first turning on pc

  Bought this pc at Wal-Mart-mart December 2013, it's a 2000 hp notebook pc with windows 8 when you turn the pc press the keys to enter my password of the user, and after I entered my password screen goes black except the white arrow, proposed by the mouse pad will not do anything after that

  Enter the BIOS by typing/holding the F10 key immediately after switching on the laptop. Use Diagnostics test your hard drive and memory.

• 15 r007TX 15 HP laptop: HP laptop screen stays black with the mouse cursor flashing

  Hello

  Here I am facing probhlem. my laptop is started but screen stays black and a slider is binking on that...

  I just perform a clean boot and once I restarted my laptop and then I faced this problem...

  Please help me...

  I have laptop HP 15 15-r007TX with windows8.1 64 bit having 4 GB RAM with i5 4 genration processor with dedicated 2 GB and 1 TB of hard disk graphics card...

  Please help me...

  Thankss...

  Hi @Shawnfrost,

  Welcome to the HP Forums!

  This is a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that when you start your laptop, you get a blank screen with a blinking cursor.

  Here is a link to help overcome this problem.

  Computers laptops HP - computer won't start (Windows 8)

  It can also help.   Laptops HP - computer will not start and the lights blink or the computer will beep.

  If you enjoy my guarantor please click on button below congratulations to say thank you.

  If it solves your problem, please click the solution in order to allow other people to find this information.

  Best of luck and have a great weekend!

• Screen went black with 'Input not supported' circulate on the screen.

  I have a Compaq Presario SR2180NX computer with a monitor, HP W19b. Lately the screen fonts/resolution move on their own to a much larger size. I went in the resolution to change it several times. Now, when this, my screen went black and a box with 'ATTENTION' entry not taken in charge"is floating around the screen. I rebooted, it unplugged and restarted but I can't display to show anything else. Suggestion? Comments except buy a new update of thing? Thank you very much.

  Start the pc in safe mode and try to change the resolution.
  Then update the graphics driver.
  C.

• Lenovo ThinkPad Edge 15 - screen becomes black for a while when connected/disconnected.

  Hey,.

  I have a problem with my Lenovo. The problem is that whenever I have plug or unplug the adapter to my pc, the screen goes black for a second about. I don't encounter this problem before, it started to happen a week or 2 ago.

  I also put in place a video on this topic to get a better overview:

  http://Tinypic.com/player.php?v=2l9r2ts&s=5

  Any help is appreciated!

  OK, I got it fixed now. Turns out it was my old graphics driver. Just updated my driver and woila. This works. Could not even think that this would have been the problem tho xD

  So if anyone else has this problem, then try to update your graphics driver.

• How to clean a laptop HP DV8 fans, screen goes black with overheating?

  Black goes screen occur when heat from the CPU reaches 100 degrees, which is 20 to 50% overall CPU activity, for example to watch video on a brower, whatever safe or normal mode you start. . Since blackscreen started 4 months after I bought the dv8, I prefer not not the material had failed and would rather follow the instructions and clean the fans finally dusty.

  But I could not open the laptop, even after the removal of every screw, does anyone know how to open these laptops?

  
  # A once that the user disappointed had finally, after 157 overheating closures
  # DV8 1050es W7x64 HP I7 Q720 Let's believe computers are simple

  It seems that the solution is about to decommission the flashplayer from adobe in order to avoid an overheating so blackscreen.

  The numbers go like this:

  current version of flash is 10.1.85.3, use 15% + _50% non-stop CPU reaches temperatures 100 degrees, which is bad

  old version 10.0.12.36 uses 7% 15th % nonstop CPU 95 degrees, what is the best

  Remember triggers of 100 degrees blackscreen, the screen is off, it is always possible to turn off the computer with the appropriate key combination. If you do not maintain the temperature rise then shut down the system, the protection feature of blocking screen is unnecessary because CPU continues to operate at the same speed in this case, the same occurs also in mode without GPU.

  That's pretty good work, but I m sure low enough the downgrade, the temperature is low.

• System screen shows black with the cursor after starting with no other course

  My Dell 1520 with vista home premium to int insptrion black screen after the user connection commissioning and hanga at that time here.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• After compaq splash, the screen is black with blinking cursor.

  Hello

  I have a CQ45-217TX, I had installed openSUSE and decided to install a different linux OS. During the installation, there was a problem and I had to give up. The power stopped in my house, causing the laptop turn off because I do not keep the battery in it so that at home.

  Now, when I start the laptop I can reach the BIOS but all start result just options in the black screen and a cursor. I have run all the tests in the BIOS and all passed. I also checked to see if the hard drive is recognized, which is.

  My windows Cd is in Taiwanese that I can not read, but does not start when even (I tried to see if I could intuitively reinstall it)

  Any advice would be greatly appreciated.

  Solved. Subsequently managed to start with external CD drive.

• iPhone 5 c screen went black with 78% battery. Tried turning off then without result.  The phone felt warm to the touch.  Is - fixable?

  The screen on my IPHONE 5 c became black and does not.  Before that I tried to send a text without response, battery was 78%.  I tried to turn on/off again without result. Any suggestions?

  Hello carolfromlincoln!

  Thank you for joining the communities Support from Apple! You might want to try the steps in this article: If your iPhone, iPad or iPod touch does not illuminate if these steps do not work:

  Contact Apple support to set up the service if you have any of these problems:

  • You always see a black screen after loading, reboot of the force or following the steps described in this article.
  • You see a black screen, but he can hear the alerts, the sounds and vibrations.
  • Your screen is enabled, but it does not respond to the when you tap, slide or try other gestures.
  • You cannot force your device restart because your Home button or the sleep/wake button is broken or blocked.
  • Your device is stuck on the Apple logo, displayed a solid color, or is not recognized in iTunes.

  See you soon!

• my screen is black with RegCure, I just put it tonight is - anyone know why?

  I am not happy!

  I am not happy!

  Hello
  Well, you use no registry cleaners because they are dangerous and they can harm your system and now you used, your options will be system restore or restore regcure registry if it created the backup! otherwise, it might be something to do with your display driver... you can go to safe mode or safe mode with network?

• EFI disk0s1 not mounted. screen shows gray with help file when I restart

  I had these problems with my recent Mac.

  1. it freezes for a few seconds. Then begins to work properly. And then freezes. The beachball keeps spinning and I can't access any of the applications.

  I tried restarting. But came up with another question. The gray screen of the charges and file aid continues to Flash.

  I tried from the recovery mode, but I get the Internet (OS X Lion). I'm under El Capitan. In disk utility, I check and repair the drive. Stop and try again. Now, there are two current icons and off - no logo entry sign and apple. If I'm lucky then after 40-50 seconds, Mac starts up.

  Now, I tried to make the EtreCheck, and he gave me more results for disc

  Disk information: ⓘ

  HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,25 (Go 110,18 free) - 70 errors

  Drive failure!

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS41N)

  
  

  That's what worry?

  
  

  What can I do to fix these problems?

  Disk0 unit 1 is not the problem. This is the EFI partition, which is never mounted, because it is used only by the bootstrapper, long before that the file system is initialized.

  Your problem is 70 errors in disk0 tranche 2, the volume Macintosh HD. This hard drive (the entire disc) was his. Dead. in ruins. You need a new drive.