How to retreve a file checked

Similar Questions

• How to determine which files can be repaired by the System File Checker tool

  Original title: results of scan now

  I have scan now it says I have corrupted files, how to know what they are

  Hi Honey bunch,

  To determine which files can be repaired by the System File Checker tool, analyze the file journal program SFC.exe (System File Checker) generates. Follow the steps mentioned in the article below

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I force System File Check to Skip restoring a file that I don't want in my system?

  Original title: sfc/scannow, Skip File.

  How can I force System File Check to Skip restoring a file that I don't want in my system?

  Hi LucasDeMH,

  Auditor of files (SFC) system is an automated process that replaces the missing or corrupt files in Windows.  When you run the SFC scan it is not possible to manually stop a restore file.

• System File Checker Windows 8 has found files corrupted - how can I fix them?

  The inability for some updates are not installed I used the System File Checker to search files corrupt in the command prompt. The result was that the corrupted files were found that could not be repaired. Depending on the solution offered I have to find the files to replace those corrupt but don't know where to find them. Any help I can get will be welcome. I have the sfctext file, but cannot download it here for reference.

  Peter

  Windows 8 Pro

  Intel (r) Core i3 CPU 2.40 GHz M370

  4.00 GB RAM

  64 bit

  Peter

  Have you run DISM education located at the end of this wiki

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• How to install a file named "firefox_plugin_2.1.1.0720.fzip"?

  Hello
  I am installing an extension for firefox Foxit software (PDF reader) but firefox always comes back and says that it is impossible to start the anti-virus program
  So when I get after the file: how to install a file named 'firefox_plugin_2.1.1.0720.fzip' will not unzip or load in firefox. How can I get the program/extension to load?
  Thank you
  Jsteff
  [email protected]

  This installer fzip is managed by Foxit Reader. The instructions are near the top of the
  download page for the plugin. Or you can use "Check for Updates" in the Help menu of Foxit. Your details indicate that you already have a version of the Foxit plugin.

• How to move a file to the rear using the Terminal

  Hello world

  I just recently started to learn how to use the terminal in OS X I learned how to move files from one directory to another, but I don't know how to move a file back again. Here is an example:

  (I'm already in the Desktop directory) In my office, I have a folder named "music" and a file called "algo.rtf". In order to move the "algo.rtf" file in the "music" folder, I type the following command: "musica algo.rtf mv / '. That works perfectly fine, when I check, the file is now in the new folder.

  But what happens if I want to move the file "algo.rtf" which is now in "musica" on the desktop? I can't understand. I tried the following:

  'cd musica' (so now I'm in the folder where the file is) and from there I typed: "mv algo.rtf Desktop /" (but then it is said; no such directory not found)

  I understand that he says no "found" because it is looking for a folder named "Desktop" in the folder named "music" and this is why it does not work.

  But that still doesn't help me much because I still don't know how to bring it back to "Desktop". If anyone knows how to do this, I would be very happy for your response!

  Thank you.

  Use:

  MV algo.rtf...

  (140623)

• How can I move files to memory stick using Vista

  Can anyone throw any light on my new problem.

  I use Windows Vista Home on my Toshiba Satellite 350 and I'm trying to save a file on memory stick.
  I find the right file and click on 'send to removable disk '.

  I then get an "Item not found" box that contains the message, "

  "Could not find this point, this point is no longer in C:\Users\Desktop.
  "I (or any place seeking) check the location of the elements, and then try again.
  I checked the site and I have the right pair.

  I tried several times with different types of files/places and I get a similar message whenever I try to move the file to anywhere, not only the memory stick

  I tried dragging the files to the box and get the same message, copy and paste do not work I still get the same message?

  Anything I'm doing wrong?

  Are you kidding me?
  You n t know how copy/move the files on the other machine?

  You must mark the file, and then press CTRL + X (shortened for CUP) then go on the memory stick and open it. Press CTRL + V (paste).

  All that s!

• How to remove image files i've got duplicates when it says I can't do it because the file is open in another program? What does that mean?

  How to remove image files i've got duplicates when it says I can't do that because the folder is open in another program? What does that mean?

  Hello

  • What version of Windows are you using?
  • What were the changes made before the problem occurred?
  
  Follow the steps in this given link and check if that helps.

  Method 1: check out the link below and follow the steps

  Access the link for more information about the error you receive below:

  Why can't I delete a file or a folder?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-delete-a-file-or-folder

  Method 2: you can also try to remove the file getting mode without failure.

  Access the link below to learn more about Safe Mode:

  Start your computer in Mode safe:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  Method 3:
  Once you face this problem you can check in Manager tasks if there is an executed program attached to it.

  a. right-click on the taskbar and click Task Manager.
  b. in the Windows Task Manager window, go to 'Process' and check if there is no program associated with those files.

  
   

• SFC (System File Checker) and using a DVD

  I got Windows Home Media 2005 on DVD. I had to reinstall the OS. I want to run SFC (System File Checker) to ensure the OS files are not corrupt from time to time. SFC always calls for a CD, does not recognize my DVD player. How can I check my OS with a DVD files?

  Why you think you have corrupted files from time to time?  You specify that you encounter a system problem, but didn't say exactly what it is!  I have hundreds of things file corrupted in my notes.

  When the system does not start successfully, exactly what is happening and what are you doing in this regard?

  Do you receive messages like that or something different?

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  A chkdsk/r from the XP Recovery Console will usually straighten this out right.

  According to what you see, you can also receive a CD bootable XP Recovery Console you can do (no XP media required).

  Since the XP Recovery Console, you can run the chkdsk command, generally replace all corrupted files since there are copies more already on your HARD drive in another place and other things.  It depends on what problems you see with this kind of corruption...

  I will include the instructions below.

  I never tried to slipstream XP Home - and may not try because I think I let someone borrow my CD XP Home and he has never had back.

  Here are the integrated installation instructions that usually a link:

  http://www.bleepingcomputer.com/tutorials/slipstreaming-Windows-XP-to-create-bootable-CD/

  It's another good forum for slipstreaming questions (I hang there too).

  A few Google searches (for something like xp slipstream) get your other similar instructions.

  Once you get it built, if you have enough space HARD drive somewhere, you can just copy it on a HARD drive and then tell XP to find files from the HDD instead of the CD (it's more convenient and faster).

  Here are the instructions to make a CD of bootable XP Recovery Console.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• How to repair a file missing grconv.dll

  Have a missing GRCONV. Message DLL file when installing Motorola phone software. How to get this file. ?

  Hi PhilipBell,

  1. Did you the latest changes on the computer?
  2. How do you install the software? Is it using the software CD or download file?
  3. What is the full error message that you receive?

  I suggest that you download on the Motorola site and check if it helps.

  http://www.Motorola.com/support/us-en/consumer-support/mobile-phones

• How can I download files from HUS and VIP for my Bernina Version 6 software?

  Original title: download embroidery files

  How can I download files from HUS and VIP for my Bernina Version 6 software? Currently, I'm only able to download ART and PES files.

  joydesigns.org (a HUS file extensions) and comcast.net (a VIP file extensions). I get a message that says "windows cannot open this file, use the web or select the program from a list". I downloaded supposed solutions to problems of conversion and lived to regret it. So, I don't know what I can do to download these special files.

  In your original post, you said you wanted to download files to use with your software Bernina HUS and VIP.

  HUS files are Husqvarna Viking embroidery files.   VIP files also are Husqvarna; Here is the Viking/Pfaff home embroidery Format.

  You have reason to believe that your Bernina embroidery software should be able to use the Husqvarna Viking files?

  On the site joydesigns.org, the design of the Dove who has the instructions "Click on the dove to go to the download page for design in .hus format" actually will download a zip compressed file if you click the icon ("FlyingDoleB.zip").  When you click on an image to download the file, you must select the option to save these files in a location that you will remember and then right click and select "extract" all to join the HUS of the file (not all downloads from this Web site are HUS).

  Once you have the file HUS, you right-click, select open with > choose program, then select your Bernina software in the list (or browse to its location in C:\Program Files).  If you check the box "Always use the selected program to open this type of file" you can double-click on these files in the future.  Of course, it depends on software Bernina being able to recognize the files of HUS.

  VIP files on some comcast getaway site should be handled in the same way.

• How to reinstall the file MSVC90.dll

  My computer cannot read the real player as it says im lack the file above. some can guide me on how to reinstall the file.

  Hi tonyuniformat

  
  You have Microsoft Visual C++ 2008 installed on the computer?

  
  Method 1:

  You can try to reinstall the program and check if that helps.

   

  Method 2:

  If the problem persists you can check if you install Microsoft visual C++ 2008 helps that solve you the problem. Refer to the below link to install the same.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

   

  I hope this helps.

• How to fix corrupted files showing in C:\WINDOWS\SoftwareDistribution\Download\2d8407673ea9865ef7cd775540e3a36b

  It is a folder in C:\WINDOWS\SoftwareDistribution\Download\2d8407673ea9865ef7cd775540e3a36b all files are damaged with names of files as a, w, $z, how delete the folder, to try to remove it gives error message cannot delete, file name\volume name \directory is incorrect\syntax error * original title - 2d8407673ea9865ef7cd775540e3a36b *.

  Hello

  ·         What is the exact error message you get?

  ·         Remember to make changes to your computer before this problem occurred?

  ·         Since when are you facing this problem?

  Try following the methods provided below and see if it helps:

  Method 1:

  I suggest you follow Method 10 article below and check if it helps:

  http://support.Microsoft.com/kb/822798

  Method 2:

  Also suggest to run the check disk for any error refer to the KB article below:

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Method 3:

  If the problem persists, run the SFC system tool to solve the problem:

  http://support.Microsoft.com/kb/310747

  Hope this helps,

• With no CD/DVD System File Checker

  I have an Asus Eee 901 Win XP family.  The netbook lacks a CD/DVD drive.  How can I run the System File Checker when he asks I insert the Windows XP SP3 CD?  Is it possible to have the System File Checker displays the name of the file it wants to repair/replace?

  Hi DonMay,

  You have the installation files to your hard drive? Folder i386?

  You need to change the path to the registry click Start-> Run & Type-> regedit-> ok-> navigate to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Setup\-> double click-> SourcePath-> enter the location of the reader.

  Also check-> HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion-> SourcePath.

  If the I386 directory is at C:\I386, the SourcePath value is C:\

  or if the I386 directory is at C:\Win\I386, the SourcePath value is C:\Win.

  I hope this helps.

• How to access the files after you put the hard drive in the external case

  I dropped my laptop and it is split.  I bought an external case for hard drive, only to discover, when I try to access the files, I'm not authourized to do.  I know the password, how do I access files, without having to pay someone a large sum of money, "with no warranty.  When I try to access it using the security feature to take possession of the files, they always come to the top an unauthorized.

  Hi martinez_gerald,

  In addition to the suggestion of Chafflube, you can consult the following KB articles and check if it helps.

  1. What is the exact error message you get when you try to access the files?

  You can read the following article and check if it helps:

  Error access is denied"when you try to open a folder

  http://support.Microsoft.com/kb/810881

  Also read the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.